Gianluca Pepe
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gianluca Pepe has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
Antonio Carcaterra
Sapienza University of Rome,Department of Mechanical and Aerospace Engineering,Rome,Italy,00184
19 shared publications- Antonio Carcaterra
Department of Mechanical and Aerospace Engineering, Sapienza University of Rome, 00184 Rome, Italy
15 shared publications Maicol Laurenza
Niccol Cusano University,Dept. of engineering,Rome,Italy
10 shared publicationsSilvia Milana
Sapienza University of Rome,Department of Mechanical and Aerospace Engineering,Rome,Italy,00184
7 shared publicationsA. Carcaterra
Department of Mechanical and Aerospace Engineering, Sapienza, University of Rome, Italy
6 shared publications- Nicola Roveri
Sapienza University of Rome
6 shared publications
Latest Publications
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 51 (2) , 1106-1128
Toward Scalable Energy-Efficient Rendezvous Optimization for Multiagent Marine Applications
Uncrewed surface vehicles (USVs) and autonomous surface vehicles (ASVs) are increasingly utilized for a variety of maritime missions, offering the benefits of enhanced safety and reduced operational costs by minimizing human risk, especially in hostile environments. Despite their clear advantages, rendezvous operations, which are essential for critical tasks such as resource exchange and recharging, present significant challenges in terms of energy efficiency and proper coordination in dynamic oceanic settings. This study proposes an energy-efficient rendezvous planning framework for autonomous vessels, focusing specifically on optimizing energy consumption and improving response times during emergency scenarios. The framework uses a multiobjective particle swarm optimization algorithm. This approach integrates propulsion optimization to reduce overall energy use in extended maneuvers while considering sea conditions and dynamic obstacles by using a visibility graph-based avoidance system. The framework proves to be robust and scalable for complex multiagent missions, consistently delivering solutions that balance energy consumption and mission time. The computation for planning with up to 15 vessels consistently remains under 5% of the total mission duration, confirming its effectiveness.
- 1 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 51 (2) , 1106-1128
Toward Scalable Energy-Efficient Rendezvous Optimization for Multiagent Marine Applications
Uncrewed surface vehicles (USVs) and autonomous surface vehicles (ASVs) are increasingly utilized for a variety of maritime missions, offering the benefits of enhanced safety and reduced operational costs by minimizing human risk, especially in hostile environments. Despite their clear advantages, rendezvous operations, which are essential for critical tasks such as resource exchange and recharging, present significant challenges in terms of energy efficiency and proper coordination in dynamic oceanic settings. This study proposes an energy-efficient rendezvous planning framework for autonomous vessels, focusing specifically on optimizing energy consumption and improving response times during emergency scenarios. The framework uses a multiobjective particle swarm optimization algorithm. This approach integrates propulsion optimization to reduce overall energy use in extended maneuvers while considering sea conditions and dynamic obstacles by using a visibility graph-based avoidance system. The framework proves to be robust and scalable for complex multiagent missions, consistently delivering solutions that balance energy consumption and mission time. The computation for planning with up to 15 vessels consistently remains under 5% of the total mission duration, confirming its effectiveness.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Modular, Low-Latency Testbed for Autonomous and Assisted Driving: Integrating SIL, VIL, and PIL Configurations
The rapid technological evolution in the automotive sector demands increasingly advanced testing platforms capable of integrating high-fidelity virtual simulations with real hardware components. In this work, we present a modular platform capable of operating in Software-in-the-Loop (SIL), Vehicle-in-the-Loop (VIL), and Passenger-in-the-Loop (PIL) configurations. The proposed solution combines photorealistic rendering using Unreal Engine 5, real-time processing via SpeedGoat and MATLAB/Simulink, advanced tracking systems (Vicon, IMU, GNSS RTK), and a Dynamic Traffic Behaviour Manager for autonomous management of heterogeneous traffic scenarios. The platform is designed to simulate complex urban environments while ensuring low latencies (average below 24 ms) and minimizing motion sickness risk—key aspects for validating autonomous and assisted driving systems. Preliminary results highlight the correct integration of the various modules, demonstrating the system's ability to manage real-time interactions between vehicles, pedestrians, and virtual scenarios. These developments provide a valuable tool for optimizing and validating control algorithms, paving the way for safer, more reliable, and immersive testing.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
A Modular, Low-Latency Testbed for Autonomous and Assisted Driving: Integrating SIL, VIL, and PIL Configurations
The rapid technological evolution in the automotive sector demands increasingly advanced testing platforms capable of integrating high-fidelity virtual simulations with real hardware components. In this work, we present a modular platform capable of operating in Software-in-the-Loop (SIL), Vehicle-in-the-Loop (VIL), and Passenger-in-the-Loop (PIL) configurations. The proposed solution combines photorealistic rendering using Unreal Engine 5, real-time processing via SpeedGoat and MATLAB/Simulink, advanced tracking systems (Vicon, IMU, GNSS RTK), and a Dynamic Traffic Behaviour Manager for autonomous management of heterogeneous traffic scenarios. The platform is designed to simulate complex urban environments while ensuring low latencies (average below 24 ms) and minimizing motion sickness risk—key aspects for validating autonomous and assisted driving systems. Preliminary results highlight the correct integration of the various modules, demonstrating the system's ability to manage real-time interactions between vehicles, pedestrians, and virtual scenarios. These developments provide a valuable tool for optimizing and validating control algorithms, paving the way for safer, more reliable, and immersive testing.
- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Integration of Neuro-Fuzzy Control in an Autonomous Driving System: A Hybrid Approach
This paper introduces a novel hybrid control strategy for autonomous driving that integrates neurotechnology-inspired signal modeling with conventional PID control to enhance vehicle performance and adaptability. The proposed approach combines a standard, fixed-gain PID controller with a dynamic neuro-fuzzy system that adjusts controller gains in real time via a dual-layer fuzzy logic framework. Specifically, a “Fuzzy Brain” module estimates the driver's Emotive State from surrogate inputs—such as lateral acceleration and yaw frequency ratios—while a “Fuzzy PID” module modulates the PID gains accordingly. Vehicle dynamics are modeled using the widely adopted bicycle model, and numerical simulations are conducted in a cone slalom scenario at speeds of 50,75, and $100 ~\text{km} / \mathrm{h}$. Results indicate that under high-demand conditions, the hybrid system yields improved trajectory tracking, stability, and responsiveness. Moreover, when the Emotive State is relaxed, the system prioritizes comfort by adopting less aggressive gains, thereby providing a balanced trade-off between agility and ride quality. These findings demonstrate that incorporating cognitively inspired inputs into autonomous control architectures can pave the way for safer, more adaptable driving systems.- 8 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Integration of Neuro-Fuzzy Control in an Autonomous Driving System: A Hybrid Approach
This paper introduces a novel hybrid control strategy for autonomous driving that integrates neurotechnology-inspired signal modeling with conventional PID control to enhance vehicle performance and adaptability. The proposed approach combines a standard, fixed-gain PID controller with a dynamic neuro-fuzzy system that adjusts controller gains in real time via a dual-layer fuzzy logic framework. Specifically, a “Fuzzy Brain” module estimates the driver's Emotive State from surrogate inputs—such as lateral acceleration and yaw frequency ratios—while a “Fuzzy PID” module modulates the PID gains accordingly. Vehicle dynamics are modeled using the widely adopted bicycle model, and numerical simulations are conducted in a cone slalom scenario at speeds of 50,75, and $100 ~\text{km} / \mathrm{h}$. Results indicate that under high-demand conditions, the hybrid system yields improved trajectory tracking, stability, and responsiveness. Moreover, when the Emotive State is relaxed, the system prioritizes comfort by adopting less aggressive gains, thereby providing a balanced trade-off between agility and ride quality. These findings demonstrate that incorporating cognitively inspired inputs into autonomous control architectures can pave the way for safer, more adaptable driving systems.- Open Access
- 7 August 2025
- Published by IOS Press
- p. 29-36
Nonlinear Model-Based Control of a Gyroscopic Stabilization System for High-Speed Crafts
The growing demand for stability in high-speed vessels has driven the development of advanced gyroscopic systems to reduce roll motion and improve passenger comfort. This work proposes a model-based nonlinear control approach applied to an active gyroscopic stabilizer installed on a semi-displacement catamaran. A 10-degree-of-freedom dynamic model has been developed, 6 for the vessel and 2 for each pair of gyroscopes, encompassing metacentric buoyancy forces and comprehensive scenarios that account for hydrodynamic actions, wind, waves, and propulsion. The control system adopts the FLOP strategy (Feedback Local Optimality Principle), which optimizes the gyroscopes’ precession and spin speed in real time to adaptively counteract roll motions and, to a lesser extent, pitch, thereby reducing local accelerations. Simulations conducted under various sea conditions (Beaufort 2–4) show up to an 80% reduction in roll amplitude, along with up to a 40% improvement in motion sickness incidence (MSI) evaluated in accordance with ISO 2631. Additionally, the FLOP controller outperforms passive gyroscopic systems and a traditional PID in terms of stability, maintaining modest power demands even in the presence of resonant frequencies and nonlinear wave interactions. Finally, an energy analysis has been carried out to assess the power required for installing the gyroscopic system, considering the added displacement and resulting hydrodynamic resistance, as well as the power needed for active precession control and spin speed regulation, considering the benefits gained in stability and comfort.
- 7 August 2025
- Published by IOS Press
- p. 29-36
Open AccessNonlinear Model-Based Control of a Gyroscopic Stabilization System for High-Speed Crafts
The growing demand for stability in high-speed vessels has driven the development of advanced gyroscopic systems to reduce roll motion and improve passenger comfort. This work proposes a model-based nonlinear control approach applied to an active gyroscopic stabilizer installed on a semi-displacement catamaran. A 10-degree-of-freedom dynamic model has been developed, 6 for the vessel and 2 for each pair of gyroscopes, encompassing metacentric buoyancy forces and comprehensive scenarios that account for hydrodynamic actions, wind, waves, and propulsion. The control system adopts the FLOP strategy (Feedback Local Optimality Principle), which optimizes the gyroscopes’ precession and spin speed in real time to adaptively counteract roll motions and, to a lesser extent, pitch, thereby reducing local accelerations. Simulations conducted under various sea conditions (Beaufort 2–4) show up to an 80% reduction in roll amplitude, along with up to a 40% improvement in motion sickness incidence (MSI) evaluated in accordance with ISO 2631. Additionally, the FLOP controller outperforms passive gyroscopic systems and a traditional PID in terms of stability, maintaining modest power demands even in the presence of resonant frequencies and nonlinear wave interactions. Finally, an energy analysis has been carried out to assess the power required for installing the gyroscopic system, considering the added displacement and resulting hydrodynamic resistance, as well as the power needed for active precession control and spin speed regulation, considering the benefits gained in stability and comfort.
- Open Access
- 7 August 2025
- Published by IOS Press
- p. 775-782
Adaptive Rendezvous Planning Algorithm for Energy-Efficient Marine Operations
In recent years, autonomous surface vehicles (USV/ASV) have found increasingly widespread application in various maritime contexts, thanks to advances in automation and artificial intelligence. However, the limited onboard energy availability still represents an obstacle to their operational autonomy, especially when undertaking long-duration missions or covering vast oceanic areas becomes necessary. To overcome this challenge, the present work proposes a rendezvous architecture in which a mother ship, equipped with a launch and recovery system (LARS), provides energy and logistical support to the autonomous drone. The planning method is based on a global optimization model that employs Particle Swarm Optimization and aims to minimize collective energy consumption, while also taking into account the energy limits and propulsive capabilities of each vehicle, without neglecting the goal of reducing mission times. Additionally, the algorithm integrates an obstacle management system based on the visibility graph, enabling safe and effective solutions even in complex scenarios. Simulation results highlight the ability to deliver near-real-time solutions and to maintain robust performance even in particularly challenging weather conditions characterized by rapid changes.
- 7 August 2025
- Published by IOS Press
- p. 775-782
Open AccessAdaptive Rendezvous Planning Algorithm for Energy-Efficient Marine Operations
In recent years, autonomous surface vehicles (USV/ASV) have found increasingly widespread application in various maritime contexts, thanks to advances in automation and artificial intelligence. However, the limited onboard energy availability still represents an obstacle to their operational autonomy, especially when undertaking long-duration missions or covering vast oceanic areas becomes necessary. To overcome this challenge, the present work proposes a rendezvous architecture in which a mother ship, equipped with a launch and recovery system (LARS), provides energy and logistical support to the autonomous drone. The planning method is based on a global optimization model that employs Particle Swarm Optimization and aims to minimize collective energy consumption, while also taking into account the energy limits and propulsive capabilities of each vehicle, without neglecting the goal of reducing mission times. Additionally, the algorithm integrates an obstacle management system based on the visibility graph, enabling safe and effective solutions even in complex scenarios. Simulation results highlight the ability to deliver near-real-time solutions and to maintain robust performance even in particularly challenging weather conditions characterized by rapid changes.
- Open Access
- 16 June 2025
- Published by Elsevier in Biosensors and Bioelectronics: X
- Vol. 26
A micro resonating motor based on neuron action potential
- 16 June 2025
- Published by Elsevier in Biosensors and Bioelectronics: X
- Vol. 26
Open AccessA micro resonating motor based on neuron action potential
- Open Access
- 16 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-21
Meta-frequency modulation in LQR vibration control with chirp excitation
This paper presents a comprehensive analysis of the indirect control of inertial properties of a rigid bodies system by semi-actively modifying the viscosity of tunable dampers. Linear Quadratic Regulator (LQR) optimal control logic and Hilbert-Huang Transform (HHT) analysis are employed to investigate its impact on the system response. The study utilizes a simple 2-d.o.f. architecture, referred to as the Toy Model, to demonstrate how proper selection of the damping coefficient allows for manipulation of the equivalent mass and variation of the natural frequency within a specific resonant band. Chirp excitations are applied to the Toy Model, and an iterative LQR scheme is implemented to optimally control the damping coefficient, thereby preventing resonance. Given that the adoption of the semi-active controller significantly alters the primary mass response, it is crucial to establish the cause-and-effect relationship between the control law and system response, which is achieved through the HHT. Notably, the proposed model is the first known example of a physical system that exhibits both intra- and inter-wave modulations of the instantaneous frequency of the main mass response, leading to a meta-phenomenon here defined as meta-frequency modulation. This meta-frequency modulation nonlinearly distorts the response of the optimally controlled system compared to passive optimization.
- 16 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-21
Open AccessMeta-frequency modulation in LQR vibration control with chirp excitation
This paper presents a comprehensive analysis of the indirect control of inertial properties of a rigid bodies system by semi-actively modifying the viscosity of tunable dampers. Linear Quadratic Regulator (LQR) optimal control logic and Hilbert-Huang Transform (HHT) analysis are employed to investigate its impact on the system response. The study utilizes a simple 2-d.o.f. architecture, referred to as the Toy Model, to demonstrate how proper selection of the damping coefficient allows for manipulation of the equivalent mass and variation of the natural frequency within a specific resonant band. Chirp excitations are applied to the Toy Model, and an iterative LQR scheme is implemented to optimally control the damping coefficient, thereby preventing resonance. Given that the adoption of the semi-active controller significantly alters the primary mass response, it is crucial to establish the cause-and-effect relationship between the control law and system response, which is achieved through the HHT. Notably, the proposed model is the first known example of a physical system that exhibits both intra- and inter-wave modulations of the instantaneous frequency of the main mass response, leading to a meta-phenomenon here defined as meta-frequency modulation. This meta-frequency modulation nonlinearly distorts the response of the optimally controlled system compared to passive optimization.
- Open Access
- 4 February 2025
- Published by MDPI AG in Preprints.org
A Micro Resonating Motor Based on Neuron Action Potential
This paper introduces a novel bioelectromechanical device converting the electrochemical potential energy of excitable cells into mechanical work by coupling the Hodgkin–Huxley (HH) neuronal model response to a mechanical resonator. Addressing key challenges in bioelectromechanical systems, including biocompatibility, miniaturization, and efficient energy conversion, the device leverages the membrane potentials of biological cells to drive mechanical oscillations within microelectromechanical systems (MEMS). Through a combination of numerical simulations and theoretical analyses, it is demonstrated that the coupled HH–resonator system achieves stable limit cycles and significant mechanical displacements via parametric amplification. This amplification arises from the nonlinear capacitive coupling, which leads to Mathieu-like equations governing the system’s dynamics, thereby enabling large oscillations from relatively small voltage inputs. Such parametric resonance is critical for the device's ability to sustain oscillatory motion, making it highly suitable for integration into compact and implantable MEMS applications. Potential applications include implantable sensors and actuators for real-time physiological monitoring, and advanced micro-scale systems that benefit from biologically sourced energy. The findings underscore the promise of bioelectromechanical systems in advancing biomedical and microengineering technologies, paving the way for innovative solutions in personalized medicine, bio-robotics, and beyond.
- 4 February 2025
- Published by MDPI AG in Preprints.org
Open AccessA Micro Resonating Motor Based on Neuron Action Potential
This paper introduces a novel bioelectromechanical device converting the electrochemical potential energy of excitable cells into mechanical work by coupling the Hodgkin–Huxley (HH) neuronal model response to a mechanical resonator. Addressing key challenges in bioelectromechanical systems, including biocompatibility, miniaturization, and efficient energy conversion, the device leverages the membrane potentials of biological cells to drive mechanical oscillations within microelectromechanical systems (MEMS). Through a combination of numerical simulations and theoretical analyses, it is demonstrated that the coupled HH–resonator system achieves stable limit cycles and significant mechanical displacements via parametric amplification. This amplification arises from the nonlinear capacitive coupling, which leads to Mathieu-like equations governing the system’s dynamics, thereby enabling large oscillations from relatively small voltage inputs. Such parametric resonance is critical for the device's ability to sustain oscillatory motion, making it highly suitable for integration into compact and implantable MEMS applications. Potential applications include implantable sensors and actuators for real-time physiological monitoring, and advanced micro-scale systems that benefit from biologically sourced energy. The findings underscore the promise of bioelectromechanical systems in advancing biomedical and microengineering technologies, paving the way for innovative solutions in personalized medicine, bio-robotics, and beyond.
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 609-614
Trotting Gait Optimization Method for a Quadruped Robot
The quadruped robots represent a rapidly growing field in the industrial world due to their various applications in supporting everyday and hazardous human activities. Despite significant research contributions, gait optimization remains a challenging task. Typically, gait patterns are inspired by mimicking nature but fall short of replicating the flexibility and articulated adaptability observed in animals. This paper introduces a new method for optimizing gait and designing quadruped robots offline. This approach takes into account the dynamics of the entire system, including leg masses, by employing genetic algorithms and nonlinear programming techniques. The results of this new technique enable the exploration of gait patterns that can accommodate the rigidity of robots while minimizing the energy cost of locomotion.
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 609-614
Trotting Gait Optimization Method for a Quadruped Robot
The quadruped robots represent a rapidly growing field in the industrial world due to their various applications in supporting everyday and hazardous human activities. Despite significant research contributions, gait optimization remains a challenging task. Typically, gait patterns are inspired by mimicking nature but fall short of replicating the flexibility and articulated adaptability observed in animals. This paper introduces a new method for optimizing gait and designing quadruped robots offline. This approach takes into account the dynamics of the entire system, including leg masses, by employing genetic algorithms and nonlinear programming techniques. The results of this new technique enable the exploration of gait patterns that can accommodate the rigidity of robots while minimizing the energy cost of locomotion.
- Open Access
- 1 June 2024
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2647 (16) , 162009
The role of spine elasticity on legged locomotion
Robot locomotion has become increasingly common in transporting and assisting humans in complex environments. However, most existing quadrupedal robots have been developed with only a single rigid trunk and limited actuation to the legs and associated joints to reduce design and controls complexity. This paper presents a non-linear optimization process to identify the highest performance gait parameters of a quadruped robot with a flexible trunk. The optimization process is conducted using evolutionary algorithms, which are based on a heuristic search inspired by Charles Darwin’s theory of natural evolution and reflect the process of natural selection. Since identifying optimal gaits requires the complete definition of ground reaction forces coupled with the optimal trajectories of the body and its vibrational modes, it is possible to determine the influence of the main parameters linked to the vibration of the trunk on the optimal gait resulting from the optimization process. The paper’s final part presents a comparison between results obtained in the case of a flexible spine and the case of a rigid trunk to demonstrate the benefits of the elastic model in terms of efficiency.
- 1 June 2024
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2647 (16) , 162009
Open AccessThe role of spine elasticity on legged locomotion
Robot locomotion has become increasingly common in transporting and assisting humans in complex environments. However, most existing quadrupedal robots have been developed with only a single rigid trunk and limited actuation to the legs and associated joints to reduce design and controls complexity. This paper presents a non-linear optimization process to identify the highest performance gait parameters of a quadruped robot with a flexible trunk. The optimization process is conducted using evolutionary algorithms, which are based on a heuristic search inspired by Charles Darwin’s theory of natural evolution and reflect the process of natural selection. Since identifying optimal gaits requires the complete definition of ground reaction forces coupled with the optimal trajectories of the body and its vibrational modes, it is possible to determine the influence of the main parameters linked to the vibration of the trunk on the optimal gait resulting from the optimization process. The paper’s final part presents a comparison between results obtained in the case of a flexible spine and the case of a rigid trunk to demonstrate the benefits of the elastic model in terms of efficiency.