JRJaime Ruiz-Garcia

Jaime Ruiz-Garcia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jaime Ruiz-Garcia has a total of 142 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    RHEED investigation of the self-assembly of InAs quantum dots on AlGaAs

    by Leticia Ithsmel Espinosa-Vega, Guadalupe Yépez-Barradas, Irving Eduardo Cortes-Mestizo, Daniel Lopez-Vilchis, Maria Fernanda Mora-Herrera, David Vázquez-Cortés, Alec P. LaGrow, Jose Luis Cuellar-Camacho, Jaime Ruiz-Garcia, Victor Hugo Mendez-Garcia

    The growth of InAs QDs on AlₓGa₁₋ₓAs layers with systematically varied Al molar fraction using molecular beam epitaxy is investigated. The growth process is monitored in situ by reflection high-energy electron diffraction (RHEED), enabling a detailed analysis of the nucleation dynamics, the critical thickness for the two-dimensional to three-dimensional (2D–3D) transition, and diffusion-related kinetic parameters within a single stacked heterostructure. Contrary to previously reported investigations performed on single heterostructures, the critical thickness of InAs on AlGaAs is found to remain nearly constant for intermediate Al content, exhibiting only minor variations, while a modest increase is observed in the AlAs limit (x = 1). Diffusion-related parameters extracted from the RHEED intensity evolution display a slight but clear dependence on the aluminum composition, indicating a progressive transition toward diffusion-limited growth. These kinetic effects are further correlated with changes in the initial surface roughness. It is also found that surface diffusion during growth, which presumably varies with Al content, has direct consequences on the pyramidal shape of the nano islands.

  • Open Access

    The solvent stability of bromovirus allows for delivery of hydrophobic chemotherapeutic drugs

    by Elizabeth Loredo-García, M. Mariana Herrera-Hernandez, Carlos Medrano-Villagómez, Pierrick G. J. Fournier, Ana G. Rodriguez-Hernandez, Marcos Loredo-Tovías, Jaime Ruiz-Garcia, Bogdan Dragnea, Ruben D. Cadena-Nava

    The solvent stability of bromoviruses (BMV/CCMV) enables their use as nanocarriers, improving the delivery and efficacy of hydrophobic drugs to breast cancer cells.


  • Differential susceptibility of Streptococcus dentisani to dental surfaces: An atomic force microscopy study

    by Brianda Karina Félix-Sicairos, Rita Elizabeth Martínez Martínez, Eleazar Samuel Kolosovas-Machuca, Jaime Ruiz-García, Alex Mira, José Luis Cuellar Camacho, Saray Aranda Romo

    Given frequent dental restorations, understanding the interactions of probiotic Streptococcus dentisani with enamel and dental materials is key, in contrast to the well-studied Streptococcus mutans. This knowledge is vital for the potential applications in promoting oral health of S. dentisani. This study aims to evaluate and compare S. mutans and S. dentisani initial adhesion, proliferation, and colonization on dental enamel and commonly used dental materials: nickel-chromium alloy, porcelain, lithium disilicate, autocured, and thermocured acrylics, using atomic force microscopy (AFM). The study utilized S. mutans ATCC 35665 and S. dentisani CECT 7746 cultured in brain-heart infusion (BHI) broth. The dental substrates used consisted of enamel obtained from healthy unerupted third molars, nickel-chromium alloy (Ni-Cr), porcelain, lithium disilicate, and both autocured and thermocured acrylics. All simples were cut into 1 cm pieces and subsequently mounted for the AFM analysis. Bacterial suspensions were incubated on these surfaces for 24 h. Surface topography and bacterial adhesion, proliferation, and colonization were analyzed using AFM in contact mode. Roughness parameters (Ra, Rrms, RMax) were quantified from AFM images using the Nanoscope analysis software. Atomic force microscopy analysis revealed that after a 24-h incubation, S. mutans demonstrated a superior capacity to adhere, proliferate, and colonize all tested substrates compared to S. dentisani. Streptococcus dentisani was found to be more susceptible to the bactericidal effects of the materials. Notably, porcelain and lithium disilicate surfaces exhibited strong antimicrobial activity. On porcelain, no intact S. dentisani cells were observed, only bacterial debris. Similarly, lithium disilicate showed evidence of bacterial decomposition for both strains, suggesting a potent bactericidal effect. For the first time, our data revealed that S. dentisani exhibited a reduced capacity for dental surface adhesion, proliferation, and colonization across all tested substrates, compared to S. mutans.

  • Open Access

    Mechanical stability of individual bacterial cells under different osmotic pressure conditions: a nanoindentation study of Pseudomonas aeruginosa

    by Lizeth García-Torres, Idania De Alba Montero, Eleazar Samuel Kolosovas-Machuca, Facundo Ruiz, Sumati Bhatia, Jose Luis Cuellar Camacho, Jaime Ruiz-García

    Nanomechanical maps to test the mechanical response of the outer envelope of Pseudomonas aeruginosa were obtained utilizing atomic force microscopy in force–volume mode in the low range of loading forces when exposed to hypotonic (Milli-Q water), isotonic (PBS), and hypertonic (0.5 M NaCl) solutions. Imaging and mechanical testing showed that bacteria are highly resilient to deformation and can withstand repetitive indentations in the range of 500 pN. Analysis of force spectra revealed that although there are differences in the mechanical response within the first stages of nanoindentation, similar values in the slopes of the curves reflected a stable stiffness of about kB = 20 mN/m and turgor pressures of Pt = 12.1 kPa. Interestingly, a change in the nonlinear regime of the force curves and a gradual increase in maximal deformation by the AFM tip from hypotonic to hypertonic solutions suggest a softening of the outer envelope, which we associate with intense dehydration and membrane separation between inner and outer envelopes. Application of a contact mechanics model to account for the minute differences in mechanical behavior upon deformation provided Young’s moduli in the range of 0.7–1.1 kPa. Implications of the presented results with previously reported data in the literature are discussed.


  • Open Access

    Spontaneous Formation of Micelles and Vesicles in Langmuir Monolayers of Heneicosanoic Acid

    by Martha I. Escamilla-Ruiz, Moises G. Zarzoza-Medina, Maricarmen Ríos-Ramírez, Pablo L. Hernández-Adame, Jaime Ruiz-García

    In Langmuir monolayers of heneicosanoic acid (C21H42O2), at low temperature, in the L'2 and CS crystalline phases, a blinking phenomenon occurs at the same positions of the monolayer, which is called localized oscillations (LO), but its origin has not been clarified. In this study, the LO phenomenon was correlated with the ejection of material out of the monolayer which was analyzed to understand this phenomenon. The techniques used for this purpose were pressure-area isotherms on a Langmuir balance and simultaneous observation of the monolayer by Brewster angle microscopy (BAM). Subsequently, using the Langmuir-Blodgett technique, the monolayers were transferred using freshly cleaved mica substrates for analysis by atomic force microscopy (AFM). Our results showed that the origin of the LO is related to a spontaneous formation of micelles and vesicles, since in AFM images these structures were observed in a size range from 4 to 16 nm. In addition, the AFM images showed that the difference between the heights of the L'2 and CS crystalline phases ranges from 13 to 15 Å.


  • Characterization of Green Synthesized Nanoparticles with Anti-diabetic Properties. A Systematic Review

    by Alejandra Loyola-Leyva, Karen Hernandez-Vidales, Jaime Ruiz-Garcia, Juan Pablo Loyola-Rodriguez

    Background: Plants are used in medicine because they are low-cost, widely available, and have few side effects (compared to pharmacological treatment). Plants have phytocompounds with antidiabetic properties that can be delivered using nanoparticles (NPs). Objective: To describe the antidiabetic properties of green synthesized NPs (GSNPs) and their characterization methods. Methods: Three databases were searched using the terms “type 2 diabetes mellitus,” “antidiabetic effects,” “phytochemicals,” “plants,” and “nanoparticles.” Studies describing the antidiabetic effects (in vitro or animal models) of NPs synthesized by plant extracts and characterizing them through UV-Vis spectroscopy, FTIR, XRD, SEM, TEM, and DLS were included. Results: 16 studies were included. In vitro studies reported enzyme inhibition values between 11% (H. polyrhizus) and 100% (A. concinna) for alfa-amylase and between 41.1% (M. zapota) and 100% (A. concinna) for alfa-glucosidase. Animal studies with Wistar Albino rats having diabetes (induced by alloxan or streptozotocin) reported improved blood glucose, triglycerides, total cholesterol, LDL, and HDL after treatment with GSNPs. Regarding characterization, NP sizes were measured with DLS (25-181.5 nm), SEM (52.1-91 nm), and TEM (8.7-40.6 nm). The surface charge was analyzed with zeta potential (-30.7 to -2.9 mV). UV-Vis spectroscopy was employed to confirm the formations of AgNPs (360-460 nm), AuNPs (524-540 nm), and ZnONPs (300-400 nm), and FTIR was used to identify plant extract functional groups. Conclusions: GSNP characterization (shape, size, zeta potential, and others) is essential to know the viability and stability, which are important to achieve health benefits for biomedical applications. Studies reported good enzyme inhibition percentages in in vitro studies, decreasing blood glucose levels and improving lipid profiles in animal models with diabetes. However, these studies had limitations in the methodology and potential risk of bias, so results need careful interpretation.


  • Open Access

    Silver nanoparticles incorporated dental restorative resin and its antibiofilm effect

    by Verónica Campos-Ibarra, Andrea Rodríguez-Moreno, Norma Verónica Zavala-Alonso, Luis Octavio Vargas-Sanchez, Marcos Loredo-Tobias, María Elena García-Arreola, Benjamin Aranda-Herrera, Jaime Ruiz-Garcia, Ravichandran Manisekaran

    Dental restoration materials are susceptible to bacterial biofilm formation, which damages the restorations and causes oral health problems. Therefore, to overcome this, silver nanoparticles (AgNPs) are studied widely due to their antimicrobial, anti-inflammatory and healing properties. The purpose of this study was to develop a strategy for incorporating AgNPs onto the surface of bisacrylic resin (Bis) to evaluate its antibiofilm effects using Streptococcus sanguinis and Actinomyces naeslundii . AgNPs with an average size of 25 nm at two different concentrations were dispersed on the Bis surface (Bis-AgNPs) by mechanical deposition. Ag release was quantified until 7 days of incubation. Bacterial growth was assessed using a viability assay kit and observed using confocal microscopy. The biofilm biomass was quantified using arbitrary fluorescence units. Cell viability was evaluated using an MTT assay. The results showed that Bis-AgNPs significantly inhibited biofilm formation along with a significant difference in the viability of human gingival fibroblasts. The quantification confirmed a decrease in Ag release over time, and elemental mapping showed AgNP penetration up to 10 µm from the surface. Therefore, it was concluded that Bis-AgNPs presented enhanced antibiofilm properties, even at a concentration with no adverse effects. Therefore, this nanocomposite may be a promising alternative for biofilm control in temporary restorative materials.


  • Open Access

    The separation between mRNA‐ends is more variable than expected

    by Nancy Gerling, J. Alfredo Mendez, Eduardo Gomez, Jaime Ruiz‐Garcia

    Effective circularization of mRNA molecules is a key step for the efficient initiation of translation. Research has shown that the intrinsic separation of the ends of mRNA molecules is rather small, suggesting that intramolecular arrangements could provide this effective circularization. Considering that the innate proximity of RNA ends might have important unknown biological implications, we aimed to determine whether the close proximity of the ends of mRNA molecules is a conserved feature across organisms and gain further insights into the functional effects of the proximity of RNA ends. To do so, we studied the secondary structure of 274 full native mRNA molecules from 17 different organisms to calculate the contour length (CL) of the external loop as an index of their end‐to‐end separation. Our computational predictions show bigger variations (from 0.59 to 31.8 nm) than previously reported and also than those observed in random sequences. Our results suggest that separations larger than 18.5 nm are not favored, whereas short separations could be related to phenotypical stability. Overall, our work implies the existence of a biological mechanism responsible for the increase in the observed variability, suggesting that the CL features of the exterior loop could be relevant for the initiation of translation and that a short CL could contribute to the stability of phenotypes.


  • Open Access

    Spontaneous bilayer wrapping of virus particles by a phospholipid Langmuir monolayer

    by J. F. Torres-Salgado, M. V. Villagrana-Escareño, A. L. Duran-Meza, X. F. Segovia-Gonzalez, R. D. Cadena-Nava, W. M. Gelbart, C. M. Knobler, J. Ruiz-García

    We report here the spontaneous formation of lipid-bilayer-wrapped virus particles, following the injection of “naked” virus particles into the subphase of a Langmuir trough with a liquid monolayer of lipids at its air–water interface. The virus particles are those of the well-studied cowpea chlorotic mottle virus, CCMV, which are negatively charged at the pH 6 of the subphase; the lipids are a 9:1 mix of neutral DMPC and cationic CTAB molecules. Before adding CCMV particles to the subphase we establish the mixed lipid monolayer in its liquid-expanded state at a fixed pressure (17.5 mN/m) and average area-per-molecule of (41Å2). Keeping the total area fixed, the surface pressure is observed to decrease at about 15 h after adding the virus particles in the subphase; by 37 h it has dropped to zero, corresponding to essentially all the lipid molecules having been removed from the air–water interface. By collecting particles from the subphase and measuring their sizes by atomic force microscopy, we show that the virus particles have been wrapped by lipid bilayers (or by two lipid bilayers). These results can be understood in terms of thermal fluctuations and electrostatic interactions driving the wrapping of the anionic virus particles by the cationic lipids. Graphical Abstract


  • Open Access

    An Observation of a Very High Swelling of Bromovirus Members at Specific Ionic Strengths and pH

    by Xochitl Fabiola Segovia-González, Maria Veronica Villagrana-Escareño, Maricarmen Ríos-Ramírez, Vianey Santiago de la Cruz, Jessica Nathaly Mejía-Hernández, Jose Luis Cuellar-Camacho, Araceli Patrón-Soberano, Richard Sportsman, Jaime Ruiz-García

    Cowpea chlorotic mottle virus (CCMV) and brome mosaic virus (BMV) are naked plant viruses with similar characteristics; both form a T = 3 icosahedral protein capsid and are members of the bromoviridae family. It is well known that these viruses completely disassemble and liberate their genome at a pH around 7.2 and 1 M ionic strength. However, the 1 M ionic strength condition is not present inside cells, so an important question is how these viruses deliver their genome inside cells for their viral replication. There are some studies reporting the swelling of the CCMV virus using different techniques. For example, it is reported that at a pH~7.2 and low ionic strength, the swelling observed is about 10% of the initial diameter of the virus. Furthermore, different regions within the cell are known to have different pH levels and ionic strengths. In this work, we performed several experiments at low ionic strengths of 0.1, 0.2, and 0.3 and systematically increased the pH in 0.2 increments from 4.6 to 7.4. To determine the change in virus size at the different pHs and ionic strengths, we first used dynamic light scattering (DLS). Most of the experiments agree with a 10% capsid swelling under the conditions reported in previous works, but surprisingly, we found that at some particular conditions, the virus capsid swelling could be as big as 20 to 35% of the original size. These measurements were corroborated by atomic force microscopy (AFM) and transmission electron microscopy (TEM) around the conditions where the big swelling was determined by DLS. Therefore, this big swelling could be an easier mechanism that viruses use inside the cell to deliver their genome to the cell machinery for viral replication.