Edmundo Fraga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Edmundo Fraga has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Ana Cuesta
Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
3 shared publications - Armando Yañez
University of A Coruña, Campus Industrial de Ferrol, CITENI, 15403 Ferrol, Spain
3 shared publications - Miguel Angel García Aranda
Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
3 shared publications - Angeles G. De la Torre
Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
2 shared publications - François Fauth
CELLS-ALBA Synchrotron, Cerdanyola del Valles, E-08290 Barcelona, Spain
2 shared publications - Jesus D. Zea-Garcia
Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
2 shared publications
Latest Publications
- 17 June 2021
- Published by Springer Nature in Journal of Thrombosis and Thrombolysis
- Vol. 53 (1) , 96-102
Impact of pre-admission antithrombotic therapy on disease severity and mortality in patients hospitalized for COVID-19
Anticoagulant therapy is a cornerstone treatment for coronavirus disease 2019 (COVID-19) due to the high rates of thromboembolic complications associated with this disease. We hypothesized that chronic antithrombotic therapy could play a protective role in patients hospitalized for COVID-19. Retrospective, observational study of all patients admitted to our hospital for ≥ 24 h from March 1 to May 31, 2020 with SARS-CoV-2. The objective was to evaluate clinical outcomes and mortality in COVID-19 patients receiving chronic anticoagulation (AC) or antiplatelet therapy (AP) prior to hospital admission. A total of 1612 patients were evaluated. The mean (standard deviation; SD) age was 66.5 (17.1) years. Patients were divided into three groups according to the use of antithrombotic therapy prior to admission (AP, AC, or no-antithrombotic treatment). At admission, 9.6% of the patients were taking anticoagulants and 19.1% antiplatelet therapy. The overall mortality rate was 19.3%. On the multivariate analysis there were no significant differences in mortality between the antithrombotic groups (AC or AP) and the no-antithrombotic group (control group). Patients on AC had lower ICU admission rates than the control group (OR: 0.41, 95% CI, 0.18–0.93). Anticoagulation therapy prior to hospitalization for COVID-19 was associated with lower ICU admission rates. However, there were no significant differences in mortality between the patients receiving chronic antithrombotic therapy and patients not taking antithrombotic medications. These findings suggest that chronic anticoagulation therapy at the time of COVID-19 infection may reduce disease severity and thus the need for ICU admission.
- 17 June 2021
- Published by Springer Nature in Journal of Thrombosis and Thrombolysis
- Vol. 53 (1) , 96-102
Impact of pre-admission antithrombotic therapy on disease severity and mortality in patients hospitalized for COVID-19
Anticoagulant therapy is a cornerstone treatment for coronavirus disease 2019 (COVID-19) due to the high rates of thromboembolic complications associated with this disease. We hypothesized that chronic antithrombotic therapy could play a protective role in patients hospitalized for COVID-19. Retrospective, observational study of all patients admitted to our hospital for ≥ 24 h from March 1 to May 31, 2020 with SARS-CoV-2. The objective was to evaluate clinical outcomes and mortality in COVID-19 patients receiving chronic anticoagulation (AC) or antiplatelet therapy (AP) prior to hospital admission. A total of 1612 patients were evaluated. The mean (standard deviation; SD) age was 66.5 (17.1) years. Patients were divided into three groups according to the use of antithrombotic therapy prior to admission (AP, AC, or no-antithrombotic treatment). At admission, 9.6% of the patients were taking anticoagulants and 19.1% antiplatelet therapy. The overall mortality rate was 19.3%. On the multivariate analysis there were no significant differences in mortality between the antithrombotic groups (AC or AP) and the no-antithrombotic group (control group). Patients on AC had lower ICU admission rates than the control group (OR: 0.41, 95% CI, 0.18–0.93). Anticoagulation therapy prior to hospitalization for COVID-19 was associated with lower ICU admission rates. However, there were no significant differences in mortality between the patients receiving chronic antithrombotic therapy and patients not taking antithrombotic medications. These findings suggest that chronic anticoagulation therapy at the time of COVID-19 infection may reduce disease severity and thus the need for ICU admission.
- 1 November 2020
- Published by Elsevier in Construction and Building Materials
- Vol. 262
Belite hydration at high temperature and pressure by in situ synchrotron powder diffraction
- 1 November 2020
- Published by Elsevier in Construction and Building Materials
- Vol. 262
Belite hydration at high temperature and pressure by in situ synchrotron powder diffraction
- Open Access
Rietveld Quantitative Phase Analysis of Oil Well Cement: In Situ Hydration Study at 150 Bars and 150 °C
Oil and gas well cements are multimineral materials that hydrate under high pressure and temperature. Their overall reactivity at early ages is studied by a number of techniques including through the use of the consistometer. However, for a proper understanding of the performance of these cements in the field, the reactivity of every component, in real-world conditions, must be analysed. To date, in situ high energy synchrotron powder diffraction studies of hydrating oil well cement pastes have been carried out, but the quality of the data was not appropriated for Rietveld quantitative phase analyses. Therefore, the phase reactivities were followed by the inspection of the evolution of non-overlapped diffraction peaks. Very recently, we have developed a new cell specially designed to rotate under high pressure and temperature. Here, this spinning capillary cell is used for in situ studies of the hydration of a commercial oil well cement paste at 150 bars and 150 °C. The powder diffraction data were analysed by the Rietveld method to quantitatively determine the reactivities of each component phase. The reaction degree of alite was 90% after 7 h, and that of belite was 42% at 14 h. These analyses are accurate, as the in situ measured crystalline portlandite content at the end of the experiment, 12.9 wt%, compares relatively well with the value determined ex situ by thermal analysis, i.e., 14.0 wt%. The crystalline calcium silicates forming at 150 bars and 150 °C are also discussed.
Open AccessRietveld Quantitative Phase Analysis of Oil Well Cement: In Situ Hydration Study at 150 Bars and 150 °C
Oil and gas well cements are multimineral materials that hydrate under high pressure and temperature. Their overall reactivity at early ages is studied by a number of techniques including through the use of the consistometer. However, for a proper understanding of the performance of these cements in the field, the reactivity of every component, in real-world conditions, must be analysed. To date, in situ high energy synchrotron powder diffraction studies of hydrating oil well cement pastes have been carried out, but the quality of the data was not appropriated for Rietveld quantitative phase analyses. Therefore, the phase reactivities were followed by the inspection of the evolution of non-overlapped diffraction peaks. Very recently, we have developed a new cell specially designed to rotate under high pressure and temperature. Here, this spinning capillary cell is used for in situ studies of the hydration of a commercial oil well cement paste at 150 bars and 150 °C. The powder diffraction data were analysed by the Rietveld method to quantitatively determine the reactivities of each component phase. The reaction degree of alite was 90% after 7 h, and that of belite was 42% at 14 h. These analyses are accurate, as the in situ measured crystalline portlandite content at the end of the experiment, 12.9 wt%, compares relatively well with the value determined ex situ by thermal analysis, i.e., 14.0 wt%. The crystalline calcium silicates forming at 150 bars and 150 °C are also discussed.
- 4 June 2019
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 26 (4) , 1238-1244
High-pressure and -temperature spinning capillary cell for in situ synchrotron X-ray powder diffraction
In situ research of materials under moderate pressures (hundreds of bar) is essential in many scientific fields. These range from gas sorption to chemical and biological processes. One industrially important discipline is the hydration of oil well cements. Existing capillary cells in this pressure range are static as they are easy to design and operate. This is convenient for the study of single-phase materials; however, powder diffraction quantitative analyses for multiphase systems cannot be performed accurately as a good powder average cannot be attained. Here, the design, construction and commissioning of a cost-effective spinning capillary cell for in situ powder X-ray diffraction is reported, for pressures currently up to 200 bar. The design addresses the importance of reducing the stress on the capillary by mechanically synchronizing the applied rotation power and alignment on both sides of the capillary while allowing the displacement of the supports needed to accommodate different capillaries sizes and to insert the sample within the tube. This cell can be utilized for multiple purposes allowing the introduction of gas or liquid from both ends of the capillary. The commissioning is reported for the hydration of a commercial oil well cement at 150 bar and 150°C. The quality of the resulting powder diffraction data has allowed in situ Rietveld quantitative phase analyses for a hydrating cement containing seven crystalline phases.
- 4 June 2019
- Published by International Union of Crystallography (IUCr) in Journal of Synchrotron Radiation
- Vol. 26 (4) , 1238-1244
High-pressure and -temperature spinning capillary cell for in situ synchrotron X-ray powder diffraction
In situ research of materials under moderate pressures (hundreds of bar) is essential in many scientific fields. These range from gas sorption to chemical and biological processes. One industrially important discipline is the hydration of oil well cements. Existing capillary cells in this pressure range are static as they are easy to design and operate. This is convenient for the study of single-phase materials; however, powder diffraction quantitative analyses for multiphase systems cannot be performed accurately as a good powder average cannot be attained. Here, the design, construction and commissioning of a cost-effective spinning capillary cell for in situ powder X-ray diffraction is reported, for pressures currently up to 200 bar. The design addresses the importance of reducing the stress on the capillary by mechanically synchronizing the applied rotation power and alignment on both sides of the capillary while allowing the displacement of the supports needed to accommodate different capillaries sizes and to insert the sample within the tube. This cell can be utilized for multiple purposes allowing the introduction of gas or liquid from both ends of the capillary. The commissioning is reported for the hydration of a commercial oil well cement at 150 bar and 150°C. The quality of the resulting powder diffraction data has allowed in situ Rietveld quantitative phase analyses for a hydrating cement containing seven crystalline phases.
- 1 November 2016
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (11) , 115103
A compact and versatile dynamic flow cryostat for photon science
We have developed a helium gas flow cryostat for use on synchrotron tender to hard X-ray beamlines. Very efficient sample cooling is achieved because the sample is placed directly in the cooling helium flow on a removable sample holder. The cryostat is compact and easy to operate; samples can be changed in less than 5 min at any temperature. The cryostat has a temperature range of 2.5–325 K with temperature stability better than 0.1 K. The very wide optical angle and the ability to operate in any orientation mean that the cryostat can easily be adapted for different X-ray techniques. It is already in use on different beamlines at the European Synchrotron Radiation Facility (ESRF), ALBA Synchrotron Light Facility (ALBA), and Diamond Light Source (DLS) for inelastic X-ray scattering, powder diffraction, and X-ray absorption spectroscopy. Results obtained at these beamlines are presented here.
- 1 November 2016
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 87 (11) , 115103
A compact and versatile dynamic flow cryostat for photon science
We have developed a helium gas flow cryostat for use on synchrotron tender to hard X-ray beamlines. Very efficient sample cooling is achieved because the sample is placed directly in the cooling helium flow on a removable sample holder. The cryostat is compact and easy to operate; samples can be changed in less than 5 min at any temperature. The cryostat has a temperature range of 2.5–325 K with temperature stability better than 0.1 K. The very wide optical angle and the ability to operate in any orientation mean that the cryostat can easily be adapted for different X-ray techniques. It is already in use on different beamlines at the European Synchrotron Radiation Facility (ESRF), ALBA Synchrotron Light Facility (ALBA), and Diamond Light Source (DLS) for inelastic X-ray scattering, powder diffraction, and X-ray absorption spectroscopy. Results obtained at these beamlines are presented here.
- 2 February 2011
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2011 (7) , 1121-1127
Further Characterization of the [FeFe]‐Hydrogenase Maturase HydG
- 2 February 2011
- Published by Wiley in European Journal of Inorganic Chemistry
- Vol. 2011 (7) , 1121-1127
Further Characterization of the [FeFe]‐Hydrogenase Maturase HydG
- 1 March 2010
- Published by Elsevier in Surface and Coatings Technology
- Vol. 204 (12-13) , 1983-1988
Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation
- 1 March 2010
- Published by Elsevier in Surface and Coatings Technology
- Vol. 204 (12-13) , 1983-1988
Study of residual stresses generated inside laser cladded plates using FEM and diffraction of synchrotron radiation
- 1 March 2006
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 77 (3) , 033904
Versatile wide angle diffraction setup for simultaneous wide and small angle x-ray scattering measurements with synchrotron radiation
Here we present a novel, simple, and versatile experimental setup aimed to perform wide angle x-ray scattering (WAXS) measurements alone or in simultaneous combination with small angle x-ray scattering measurements. The design of the WAXS goniometer allows one to obtain high resolution diffraction patterns in a broad angular range. The setup can incorporate a hot stage in order to evaluate temperature resolved experiments. The performance of the equipment has been verified in the BM16 beam line of the European Synchrotron Radiation Facility with different well known samples such as alumina, isotropic film of high density polyethylene (HDPE), and oriented HPDE fiber.
- 1 March 2006
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 77 (3) , 033904
Versatile wide angle diffraction setup for simultaneous wide and small angle x-ray scattering measurements with synchrotron radiation
Here we present a novel, simple, and versatile experimental setup aimed to perform wide angle x-ray scattering (WAXS) measurements alone or in simultaneous combination with small angle x-ray scattering measurements. The design of the WAXS goniometer allows one to obtain high resolution diffraction patterns in a broad angular range. The setup can incorporate a hot stage in order to evaluate temperature resolved experiments. The performance of the equipment has been verified in the BM16 beam line of the European Synchrotron Radiation Facility with different well known samples such as alumina, isotropic film of high density polyethylene (HDPE), and oriented HPDE fiber.