GMGift Mehlana

Gift Mehlana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Gift Mehlana has a total of 94 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Plasmonic Ag@ZIF-8 Monolith for Enhanced Visible-Light Photocatalytic Degradation of Methylene Blue

    by Piwai Tshuma, Mercy Chaparadza, Thapelo Seimela, Mmantsae Diale, Nicola Vimbainashe Poshayi, Linia Gedi Marazani, Gift Mehlana

    Water contamination by organic dyes remains a major environmental challenge due to their toxicity, persistence, and resistance to conventional treatment methods. In this study, a plasmonic silver-modified metal–organic framework monolith was successfully synthesized via a sol–gel approach. Incorporation of Ag species during gel formation ensured homogeneous distribution within the ZIF-8 framework, which was followed by in situ chemical reduction to produce a reduced material denoted Ag0@ZIF-8. Comprehensive characterization confirmed the structural integrity of the ZIF-8 framework, with TEM revealing electron-dense silver domains and UV–vis DRS showing enhanced visible-light absorption associated with localized surface plasmon resonance (LSPR). The photocatalytic performance of Ag0@ZIF-8 was evaluated through the degradation of methylene blue under visible light. The catalyst exhibited significantly enhanced activity compared to pristine ZIF-8 and the Ag+@ZIF-8 monolith, achieving a maximum degradation efficiency of 90.4 ± 1.0% under optimized conditions (pH 8, 60 mg of catalyst, 60 min irradiation). Kinetic studies confirmed pseudo-first-order behavior with a rate constant of 0.0358 min–1 (R2 = 0.9923). Scavenger experiments revealed that superoxide radicals (•O2–) played the dominant role in methylene blue degradation, with hydroxyl radicals (•OH) and photogenerated holes (h+) making secondary contributions. The Ag0@ZIF-8 monolith also demonstrated good reusability, retaining over 75% of its initial activity after five cycles. Overall, this work highlights the synergistic interaction between plasmonic silver species and the ZIF-8 monolith, resulting in enhanced visible-light-driven photocatalytic degradation of organic pollutants, offering a promising strategy for wastewater treatment applications.

  • Open Access

    Unraveling the structural and optical properties of WO 3 /anatase–brookite TiO 2 heterostructures for enhanced visible-light photocatalysis

    by Gloria I. Murila, Bridget K. Mutuma, Maxwell J. Mageto, Henry B. Wafula, Francis M. Gaitho, Emily Aradi, Gift Mehlana, Yoshifumi Kondo, Tomoyo Goto, Jonder Morais, et al.

    Tailored WO 3 /anatase–brookite TiO 2 heterostructures synergistically enhance structure and optical response for efficient visible-light photocatalysis.

  • Open Access

    Visible-light driven photocatalytic degradation of tartrazine using Co@ZIF-8 monoliths

    by Piwai Tshuma, Arnold Phiri, Mercy Chaparadza, Thapelo Seimela, Mmantsae Diale, Nicola Vimbainashe Poshayi, Linia Gedi Marazani, Gift Mehlana

    Metal–organic frameworks have emerged as promising materials for environmental remediation due to their high surface area, tunable porosity, and structural versatility.


  • Open Access

    Towards hybrid MOF@COF and COF@MOF platforms for next-generation biocatalysis

    by Mercy Chaparadza, Linia Gedi Marazani, Lendly Moyo, Evernice Chikukwa, Piwai Tshuma, Johannes Hungwe, Gift Mehlana

    Enzyme immobilization is central to advancing sustainable biocatalysis, yet conventional supports often fail to simultaneously provide structural protection, mass transport, and chemical tunability. Traditional support materials often lack the optimal combination of porosity, stability, and surface functionality needed to preserve enzyme activity. Metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) have emerged as promising hosts due to their high surface area, tunable porosity, and chemical versatility. Recent developments in hybrid architectures MOF@COF and COF@MOF offer a synergistic platform that integrates the structural flexibility and catalytic tunability of MOFs with the robustness and stability of COFs. This review highlights the design principles, immobilization strategies, and catalytic behavior of enzyme@MOF@COF and enzyme@COF@MOF systems. We discuss advances in situ encapsulation, covalent binding, and adsorption-based immobilization, emphasizing how hybrid frameworks enhance enzyme protection, substrate diffusion, and cascade catalysis. Key challenges including scalability, enzyme leaching, and synthesis reproducibility are also critically examined. Finally, we outline future opportunities for rational design of hybrid frameworks that enable precise enzyme spatial organization and multi-enzyme systems, paving the way for next-generation, sustainable biocatalytic technologies.


  • Open Access

    Synthesis and characterization of lanthanide MOFs based on 2,2′-bipyridine-5,5′-dicarboxylate linkers

    by Maureen Gumbo, Gift Mehlana

    Two new metal-organic frameworks based on 2,2′-bipyridine-5,5′-dicarboxylate and lanthanide (Ln) metal ions were prepared under solvothermal conditions, using HCl as a modulator. JMS-8 and JMS-9 MOFs ([Ln(bpdc) 3 (dmf)(H 2 O) 3· 5dmf·1.5H 2 O] n ) crystallised in a triclinic system with space group P 1 ̅ $̅{1}$ . The MOFs have rod SBUs that grow along the b -axis. The linkers connect the SBUs along the a -axis and c -axis giving a 3D network structure. The packing diagrams show large pores as viewed on the a -axis and smaller pores which can be viewed on the c -axis. The MOFs exhibit good thermal and chemical stability. Gas sorption studies revealed low surface areas and poor CO 2 adsorption capacity.

  • Open Access

    Recent progress in synthesis and applications of monolithic metal–organic frameworks

    by Donald Muringaniza, Laurencia Zulu, Linia Gedi Marazani, Piwai Tshuma, Gift Mehlana

    In this review, we explore the recent advances in the synthetic methods of monolithic MOFs and their emerging applications. Challenges and opportunities are also highlighted.


  • Open Access

    Understanding Metal–Organic Framework Densification: Solvent Effects and the Growth of Colloidal Primary Nanoparticles in Monolithic ZIF‐8

    by Ayush Pathak, Lana A. Alghamdi, Javier Fernández‐Catalá, Michele Tricarico, Diego Cazorla‐Amorós, Jin‐Chong Tan, Ángel Berenguer‐Murcia, Gift Mehlana, Andrew E. H. Wheatley

    To commercialize metal–organic frameworks (MOFs), it is vital they are made easier to handle. There have been many attempts to synthesize them as pellets, tablets, or granules, though they come with innate drawbacks. Only recently have these been overcome, through the advent of self‐shaping densified or monolithic MOFs (monoMOFs), which require minimal post‐synthetic modification and avoid poor structural integrity, intractability, and pore collapse or blockage. ZIF‐8 (zeolitic imidazolate framework‐8) has emerged as a prototypical monoMOF in pure and in situ doped forms. Now its formation in solvent mixtures is studied to better understand the early stages of monolith formation and improve the scope of monoliths for hosting solvent‐sensitive guests. Solvent‐, temperature‐ and coagulant‐dependent control over reaction kinetics induces variations in morphology that are explained by relating the nucleation and growth rates of primary nanocrystallites to the stability of colloidal dispersions during reaction. This yields mesoporous monoZIF‐8 with mean pore size 16 nm, SBET >1400 m2 g−1, bulk density 0.76 g cm−3, and resistance to permanent deformation exceeding previous reports. While the study highlights the powerful manipulation of monoMOF characteristics, a new understanding of the growth and stability of primary nanocrystallites has consequences for colloid synthesis generally.


  • Open Access

    Copper-Based Metal–Organic Framework: Synthesis, Characterization and Evaluation for the Hydrogenation of Furfural to Furfuryl Alcohol

    by Pamela S. Moyo, Gift Mehlana, Leah C. Matsinha, Banothile C. E. Makhubela

    A novel Cu-MOF was synthesized at room temperature from commercially available and inexpensive reagents. The pre-catalyst was characterized using X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, inductively coupled plasma-optical emission spectroscopy, Fourier transform-infrared spectroscopy, powder X-ray diffraction, Brunauer-Emmet-Teller (BET) and scanning electron microscopy-energy dispersive X-ray spectroscopy. The Cu-MOF was characterized as microporous material with BET surface area and pore volume of 7.47 m2/g and 0.27 cm3/g, respectively, and is stable in most solvents. The MOF was evaluated as a heterogeneous catalyst for the hydrogenation of furfural to furfuryl alcohol (FA). Cu-MOF exhibited a high conversion of FF (76%) with selectivity towards FA (100%) at 140 °C, 50 bar for 24 h. The MOF was reused four consecutive times with a loss in catalytic performance. The decrease in catalytic activity could be attributed to the formation of inactive Cu(0) as revealed by HR-TEM and XPS studies. The HR-TEM of spent Cu-MOF showed a uniform particle size diameter of 3.5 nm. This work is significant in providing new strategies for the design and fabrication of highly selective MOF catalysts for the FF upgrading.


  • Open Access

    Water sorption studies with mesoporous multivariate monoliths based on UiO-66

    by Linia Gedi Marazani, Victoria Gascon-Perez, Ayush Pathak, Michele Tricarico, Jin-Chong Tan, Michael J. Zaworotko, Andrew E. H. Wheatley, Banothile C. E. Makhubela, Gift Mehlana

    Hierarchical linker thermolysis has been used to enhance the porosity of monolithic UiO-66-based metal–organic frameworks (MOFs) containing 30 wt% 2-aminoterephthalic acid (BDC-NH2) linker. In this multivariate (i.e. mixed-linker) MOF, the thermolabile BDC-NH2 linker decomposed at ∼350 °C, inducing mesopore formation. The nitrogen sorption of these monolithic MOFs was probed, and an increase in gas uptake of more than 200 cm3 g−1 was observed after activation by heating, together with an increase in pore volume and mean pore width, indicating the creation of mesopores. Water sorption studies were conducted on these monoliths to explore their performance in that context. Before heating, monoUiO-66-NH2-30%-B showed maximum water vapour uptake of 61.0 wt%, which exceeded that reported for either parent monolith, while the highly mesoporous monolith (monoUiO-66-NH2-30%-A) had a lower maximum water vapour uptake of 36.2 wt%. This work extends the idea of hierarchical linker thermolysis, which has been applied to powder MOFs, to monolithic MOFs for the first time and supports the theory that it can enhance pore sizes in these materials. It also demonstrates the importance of hydrophilic functional groups (in this case, NH2) for improving water uptake in materials.


  • Open Access

    Synthesis and characterisation of neodymium-based MOFs for application in carbon dioxide reduction to syngas

    by Linia Gedi Marazani, Maureen Gumbo, Lendly Moyo, Banothile C. E. Makhubela, Gift Mehlana

    The metal–organic framework functionalised with a Ru(ii) complex showed high photocatalytic activity for the conversion of CO2into syngas.