Kapil Saraswat
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kapil Saraswat has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
A. R. Harish
Department of Electrical Engineering, IIT Kanpur, Kanpur208016, UP, India
10 shared publicationsAyyangar R. Harish
Electrical Engineering Indian Institute of Technology Kanpur Kanpur Uttar Pradesh India
6 shared publicationsA.R. Harish
Department of Electrical Engineering; IIT Kanpur; Kanpur Uttar Pradesh India
2 shared publications- Abhishek Kumar Awasthi
Lovely Professional University, India
2 shared publications Trivesh Kumar
Department of Electrical Engineering, IIT Kanpur, Kanpur208016, UP, India
2 shared publications- Abul Barkat
Department of Pharmaceutics, College of Pharmacy, University of Hafr Al Batin, Al Jamiah, Hafr Al Batin 39524, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
- 25 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (14) , 1786-1790
Dual‐band polarisation reconfigurable grounded fractal slot antenna
A polarisation reconfigurable fractal slot antenna with dual‐band performance is proposed in this study. The antenna consists of a Minkowski Island fractal inspired slot in the ground plane, which is excited by a microstrip line. The input match of the antenna is improved by placing two protruding horizontal stubs inside the two corners of the fractal slot. Four p‐i‐n diodes are placed within the grounded fractal structure to realise polarisation reconfigurability. Based on the switching states of the p‐i‐n didoes, the proposed antenna can produce right‐hand circular polarisation or left‐hand circular polarisation. A novel biasing network is used, which uses only two wires for polarisation switching. A prototype of the proposed antenna is fabricated and tested. When the antenna is configured to radiate circular polarisation, the measured reflection coefficient bandwidths (corresponding to dB) for the two bands are 15.44 and 13.16% and the measured axial ratio bandwidths (corresponding to AR 3 dB) are 17.61 and 8.69%, respectively.
- 25 September 2020
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 14 (14) , 1786-1790
Open AccessDual‐band polarisation reconfigurable grounded fractal slot antenna
A polarisation reconfigurable fractal slot antenna with dual‐band performance is proposed in this study. The antenna consists of a Minkowski Island fractal inspired slot in the ground plane, which is excited by a microstrip line. The input match of the antenna is improved by placing two protruding horizontal stubs inside the two corners of the fractal slot. Four p‐i‐n diodes are placed within the grounded fractal structure to realise polarisation reconfigurability. Based on the switching states of the p‐i‐n didoes, the proposed antenna can produce right‐hand circular polarisation or left‐hand circular polarisation. A novel biasing network is used, which uses only two wires for polarisation switching. A prototype of the proposed antenna is fabricated and tested. When the antenna is configured to radiate circular polarisation, the measured reflection coefficient bandwidths (corresponding to dB) for the two bands are 15.44 and 13.16% and the measured axial ratio bandwidths (corresponding to AR 3 dB) are 17.61 and 8.69%, respectively.
- 23 January 2020
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 12 (5) , 431-436
A corrugated G-shaped grounded ring slot antenna for wideband circular polarization
In this paper, a wideband circularly polarized corrugated G-shaped grounded ring slot antenna is presented. The proposed antenna structure is excited using a coplanar waveguide-fed monopole antenna, which is placed inside a corrugated G-shaped grounded ring. Due to the asymmetry in the ground plane, two orthogonal modes, having equal magnitude and out of phase by 90° are excited, resulting in circular polarization (CP). The generation of the CP in the proposed antenna structure is explained using thin dipole current element approximation. A prototype of the proposed antenna is fabricated and tested. The measured results exhibit a 3 dB axial ratio bandwidth of 37.6% (2.22–3.25 GHz), and reflection coefficient bandwidth (|S11| ≤ −10 dB) of 47.91% (2.13–3.47 GHz). Additionally, the design guidelines are also presented for G-shaped grounded ring slot antennas.
- 23 January 2020
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 12 (5) , 431-436
A corrugated G-shaped grounded ring slot antenna for wideband circular polarization
In this paper, a wideband circularly polarized corrugated G-shaped grounded ring slot antenna is presented. The proposed antenna structure is excited using a coplanar waveguide-fed monopole antenna, which is placed inside a corrugated G-shaped grounded ring. Due to the asymmetry in the ground plane, two orthogonal modes, having equal magnitude and out of phase by 90° are excited, resulting in circular polarization (CP). The generation of the CP in the proposed antenna structure is explained using thin dipole current element approximation. A prototype of the proposed antenna is fabricated and tested. The measured results exhibit a 3 dB axial ratio bandwidth of 37.6% (2.22–3.25 GHz), and reflection coefficient bandwidth (|S11| ≤ −10 dB) of 47.91% (2.13–3.47 GHz). Additionally, the design guidelines are also presented for G-shaped grounded ring slot antennas.
- 29 August 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 62 (1) , 363-370
A polarization reconfigurable discontinuous ring dipole antenna
A circularly polarized antenna is realized using a discontinuous ring dipole. With the introduction of p‐i‐n diodes, it has been possible to achieve polarization reconfigurability in the antenna. The antenna is fed by a tapered feed line, which also acts as a balun and biasing structure. The sense of rotation of the electric field vector (left‐hand or right‐hand) can be controlled by switching the states of the diodes. An equivalent circuit of the antenna is proposed, which has been used to compute the input reflection coefficient of the antenna. The performance of the antenna is verified by comparing the simulated results with the measured results. It has been observed that the antenna has 8.56% overlapping CP bandwidth (a common bandwidth for |S11| ≤ −10 dB and axial ratio, AR ≤3 dB) from 5.03to 5.48 GHz. A measured gain of 3.61 dBic is obtained for all polarization states. The proposed antenna can be used for the 5.2 GHz Wi‐Fi application.
- 29 August 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 62 (1) , 363-370
A polarization reconfigurable discontinuous ring dipole antenna
A circularly polarized antenna is realized using a discontinuous ring dipole. With the introduction of p‐i‐n diodes, it has been possible to achieve polarization reconfigurability in the antenna. The antenna is fed by a tapered feed line, which also acts as a balun and biasing structure. The sense of rotation of the electric field vector (left‐hand or right‐hand) can be controlled by switching the states of the diodes. An equivalent circuit of the antenna is proposed, which has been used to compute the input reflection coefficient of the antenna. The performance of the antenna is verified by comparing the simulated results with the measured results. It has been observed that the antenna has 8.56% overlapping CP bandwidth (a common bandwidth for |S11| ≤ −10 dB and axial ratio, AR ≤3 dB) from 5.03to 5.48 GHz. A measured gain of 3.61 dBic is obtained for all polarization states. The proposed antenna can be used for the 5.2 GHz Wi‐Fi application.
- Open Access
- 12 July 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 13 (12) , 2053-2060
Flexible dual‐band dual‐polarised CPW‐fed monopole antenna with discrete‐frequency reconfigurability
A flexible dual‐band dual‐polarised CPW‐fed monopole antenna with discrete‐frequency reconfigurability is presented here. In the proposed antenna, to achieve dual‐band performance, a U‐slot is incorporated within the CPW‐fed monopole. The antenna is fabricated on a flexible and transparent substrate so that it can be used for conformal applications. The effect of antenna bending on its performance is discussed here. Further, the proposed antenna structure is extended to achieve discrete‐frequency reconfigurability. Two p‐i‐n diodes are incorporated within the monopole to achieve reconfigurability of higher band. A simplified equivalent circuit of the reconfigurable antenna is also presented and validated using full wave EM simulation. To validate the proposed structure, dual‐band antenna and discrete frequency reconfigurable antenna have been fabricated and tested.
- 12 July 2019
- Published by Institution of Engineering and Technology (IET) in IET Microwaves, Antennas & Propagation
- Vol. 13 (12) , 2053-2060
Open AccessFlexible dual‐band dual‐polarised CPW‐fed monopole antenna with discrete‐frequency reconfigurability
A flexible dual‐band dual‐polarised CPW‐fed monopole antenna with discrete‐frequency reconfigurability is presented here. In the proposed antenna, to achieve dual‐band performance, a U‐slot is incorporated within the CPW‐fed monopole. The antenna is fabricated on a flexible and transparent substrate so that it can be used for conformal applications. The effect of antenna bending on its performance is discussed here. Further, the proposed antenna structure is extended to achieve discrete‐frequency reconfigurability. Two p‐i‐n diodes are incorporated within the monopole to achieve reconfigurability of higher band. A simplified equivalent circuit of the reconfigurable antenna is also presented and validated using full wave EM simulation. To validate the proposed structure, dual‐band antenna and discrete frequency reconfigurable antenna have been fabricated and tested.
- 23 May 2019
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 11 (10) , 1054-1060
A polarization and band reconfigurable cross-slot antenna for multiband application
A polarization and band reconfigurable cross-slot antenna for multiband applications is presented in this paper. The antenna consists of four p–i–n diodes embedded in the cross-shaped slot in a ground plane and excited by a microstrip feed line. The p–i–n diodes are placed in such a way that they produce multiple bands, with linearly and circularly polarized (CP) radiation. By switching the states of the p–i–n diodes, the sense of rotation of the electric field in CP radiation can be reconfigured. The proposed structure can be configured to produce two bands that radiate linearly polarized waves or three bands, where, two are linearly polarized and one is CP. The proposed design concepts are validated bythe CST studio suite as well as measurementsare carried out on fabricated prototypes.
- 23 May 2019
- Published by Cambridge University Press (CUP) in International Journal of Microwave and Wireless Technologies
- Vol. 11 (10) , 1054-1060
A polarization and band reconfigurable cross-slot antenna for multiband application
A polarization and band reconfigurable cross-slot antenna for multiband applications is presented in this paper. The antenna consists of four p–i–n diodes embedded in the cross-shaped slot in a ground plane and excited by a microstrip feed line. The p–i–n diodes are placed in such a way that they produce multiple bands, with linearly and circularly polarized (CP) radiation. By switching the states of the p–i–n diodes, the sense of rotation of the electric field in CP radiation can be reconfigured. The proposed structure can be configured to produce two bands that radiate linearly polarized waves or three bands, where, two are linearly polarized and one is CP. The proposed design concepts are validated bythe CST studio suite as well as measurementsare carried out on fabricated prototypes.
- 7 March 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 61 (6) , 1607-1611
A coplanar waveguide fed tilted fractal inspired slot antenna for wideband circular polarization
In this article, a coplanar waveguide (CPW) fed 45° tilted fractal inspired slot antenna to achieve wideband circular polarization is presented. A fractal‐square slot is etched from the ground plane and rotated by 45°. The fractal slot is excited by the CPW fed monopole antenna. To achieve wideband circular polarization, asymmetric arm length of the fractal slot is used. The proposed antenna is fabricated and tested. The measured impedance bandwidth (|S11| < −10 dB) is 22.5% (3.6‐4.57 GHz) for Band‐1 and 63.5% (5.1‐10.1 GHz) for Band‐2, and measured 3 dB axial ratio bandwidth is 34.7% (6.37‐9.05 GHz). Experimental results show that the proposed antenna generates right‐hand circular polarization in the +Z direction. Left‐hand circular polarization can be achieved by tilting the fractal slot by −45°.
- 7 March 2019
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 61 (6) , 1607-1611
A coplanar waveguide fed tilted fractal inspired slot antenna for wideband circular polarization
In this article, a coplanar waveguide (CPW) fed 45° tilted fractal inspired slot antenna to achieve wideband circular polarization is presented. A fractal‐square slot is etched from the ground plane and rotated by 45°. The fractal slot is excited by the CPW fed monopole antenna. To achieve wideband circular polarization, asymmetric arm length of the fractal slot is used. The proposed antenna is fabricated and tested. The measured impedance bandwidth (|S11| < −10 dB) is 22.5% (3.6‐4.57 GHz) for Band‐1 and 63.5% (5.1‐10.1 GHz) for Band‐2, and measured 3 dB axial ratio bandwidth is 34.7% (6.37‐9.05 GHz). Experimental results show that the proposed antenna generates right‐hand circular polarization in the +Z direction. Left‐hand circular polarization can be achieved by tilting the fractal slot by −45°.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Frequency and Band Reconfigurable Circularly Polarized Square Ring Slot Monopole Antenna
In this paper, a frequency and band reconfigurable grounded square ring slot monopole antenna is presented for the circular polarization. A coplanar waveguide fed monopole excites the grounded slot. Two inverted L-shaped stubs are placed in the opposite corners of the grounded slot, resulting in the generation of circular polarization. Embedding an RF switch within one of the L-strips, it is possible to achieve a frequency reconfigurability. Additionally, by introducing a switchable vertical stub, the band reconfigurability can also be achieved. The proposed design concepts are validated using full wave EM simulation and measurement on a fabricated prototype.
- 1 December 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Frequency and Band Reconfigurable Circularly Polarized Square Ring Slot Monopole Antenna
In this paper, a frequency and band reconfigurable grounded square ring slot monopole antenna is presented for the circular polarization. A coplanar waveguide fed monopole excites the grounded slot. Two inverted L-shaped stubs are placed in the opposite corners of the grounded slot, resulting in the generation of circular polarization. Embedding an RF switch within one of the L-strips, it is possible to achieve a frequency reconfigurability. Additionally, by introducing a switchable vertical stub, the band reconfigurability can also be achieved. The proposed design concepts are validated using full wave EM simulation and measurement on a fabricated prototype.
- 29 November 2018
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (4) , e21602
A wideband polarization reconfigurable isosceles trapezoidal monopole antenna
In this article, a polarization reconfigurable isosceles trapezoidal monopole antenna for the circular polarization (CP) is presented. A trapezoidal monopole and the ground plane are on the same side of the dielectric substrate. The monopole is excited by a reconfigurable T‐shaped 50 Ω microstrip feed line and reconfigurable vertical slots are incorporated in the ground plane to realize switchable wideband CP. For the different switching states of the p‐i‐n diodes, linear polarization, left‐handed and right handed CP can be achieved in the boresight direction (+z direction). The antenna prototype is fabricated and tested. The measured reflection coefficient bandwidth (|S11| < −10 dB) is 31.2% (2.13 ‐ 2.91 GHz) and axial ratio bandwidth (axial ratio < 3 dB) is 22% (2.18 ‐ 2.72 GHz) for the CP. The measured reflection coefficient bandwidth is 18.56% (2.15 ‐ 2.59 GHz) for linear polarization.
- 29 November 2018
- Published by Hindawi Limited in International Journal of RF and Microwave Computer-Aided Engineering
- Vol. 29 (4) , e21602
A wideband polarization reconfigurable isosceles trapezoidal monopole antenna
In this article, a polarization reconfigurable isosceles trapezoidal monopole antenna for the circular polarization (CP) is presented. A trapezoidal monopole and the ground plane are on the same side of the dielectric substrate. The monopole is excited by a reconfigurable T‐shaped 50 Ω microstrip feed line and reconfigurable vertical slots are incorporated in the ground plane to realize switchable wideband CP. For the different switching states of the p‐i‐n diodes, linear polarization, left‐handed and right handed CP can be achieved in the boresight direction (+z direction). The antenna prototype is fabricated and tested. The measured reflection coefficient bandwidth (|S11| < −10 dB) is 31.2% (2.13 ‐ 2.91 GHz) and axial ratio bandwidth (axial ratio < 3 dB) is 22% (2.18 ‐ 2.72 GHz) for the CP. The measured reflection coefficient bandwidth is 18.56% (2.15 ‐ 2.59 GHz) for linear polarization.