SSSeung Wook Shin

Seung Wook Shin

*This is an algorithmically generated author record based on publicly available information.

Seung Wook Shin has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • How the Ge Incorporation Approach Affects Non-radiative Recombination Losses in CZTSSe Thin-Film Solar Cells

    by Hojun Choi, Vijay C. Karade, Jun Sung Jang, Youseong Park, Mingrui He, Mahesh P. Suryawanshi, Dong Hyun Kang, Eunjin Jo, Donghoon Song, Abasi Abudulimu, et al.

    Kesterite-based thin-film solar cells (TFSCs) have regained attention in the photovoltaic community in recent times. However, their device performance still lags behind CdTe and Cu(In,Ga)Se2-based TFSCs because of dominant non-radiative recombination losses. The unstable nature of Sn ionic states is the main cause of poor performance. The present study employs the strategy of Ge doping at different positions in stacked metallic precursor layers and investigates real-time external radiative efficiency (ERE) mapping to clarify the role of Ge in kesterite-based compounds. The position of the Ge within the stacked metallic precursor shows distinct alloying behavior and variations in the density of Sn-related defects and associated defect clusters. Consequently, it offers improved grain growth and a reduced density of Sn-related deep-level defects in kesterite thin films. Furthermore, spatial ERE mapping reveals that the stacking order of the Ge significantly influences the average signal and uniformity of ERE. The Ge incorporation in metallic precursors results in an increased open-circuit voltage owing to significantly reduced non-radiative recombination. This study provides valuable insights into the assessment of non-radiative losses using a powerful tool, such as ERE, which assists in the development of these devices and contributes to achieving higher power conversion efficiency in TFSCs.


  • Simultaneous cation substitution and rear interface engineering strategies for highly efficient CZTSSe-based solar cells

    by Jun Sung Jang, Youseong Park, Mingrui He, Vijay C. Karade, Myeong Cheol Baek, Donghoon Song, Mahesh P. Suryawanshi, Hojun Choi, Dong Hyun Kang, Youngrog Kim, et al.

    By implementing a MoO x interlayer and a co-cation substitution strategy in conventional CZTSSe solar cells, we successfully improved the rear-interface contact properties and effectively suppressed deep-level defects.


  • Open Access

    Opportunities and challenges for emerging inorganic chalcogenide–silicon tandem solar cells

    by Vijay C. Karade, Mingrui He, Zhaoning Song, Abasi Abudulimu, Yeonwoo Park, Donghoon Song, Yanfa Yan, Jin Hyeok Kim, Randy J. Ellingson, Jae Ho Yun, et al.

    This review highlights the potential of emerging inorganic chalcogenide–silicon tandem solar cells, which address efficiency and stability limitations of single-junction devices and offer a less-toxic, more stable alternative for tandem applications.


  • Open Access

    Toward Maximizing Hole Selection with Self-Assembled Monolayers in Sn-Based Perovskite Solar Cells

    by Donghoon Song, Seung Wook Shin, Hui-Ping Wu, Eric Wei-Guang Diau, Juan-Pablo Correa-Baena


  • Facile Approach for Metallic Precursor Engineering for Efficient Kesterite Thin-Film Solar Cells

    by Sang Woo Park, Mingrui He, Jun Sung Jang, Girish U. Kamble, Umesh P. Suryawanshi, Myeong Cheol Baek, Mahesh P. Suryawanshi, Myeng Gil Gang, Youseong Park, Ho Jun Choi, et al.

    Kesterite-based Cu2ZnSn(S,Se)4 (CZTSSe) thin-film solar cells (TFSCs) are a promising candidate for low-cost, clean energy production owing to their environmental friendliness and the earth-abundant nature of their constituents. However, the advancement of kesterite TFSCs has been impeded by abundant defects and poor microstructure, limiting their performance potential. In this study, we present efficient Ag-alloyed CZTSSe TFSCs enabled by a facile metallic precursor engineering approach. The positioning of the Ag nanolayer in the metallic stacked precursor proves crucial in expediting the formation of Cu-Sn metal alloys during the alloying process. Specifically, Ag-included metallic precursors promote the growth of larger grains and a denser microstructure in CZTSSe thin films compared to those without Ag. Moreover, the improved uniformity of Ag, facilitated by the evaporation deposition technique, significantly suppresses the formation of detrimental defects and related defect clusters. This suppression effectively reduces nonradiative recombination, resulting in enhanced performance in kesterite TFSCs. This study not only introduces a metallic precursor engineering strategy for efficient kesterite-based TFSCs but also accelerates the development of microstructure evolution from metallic stacked precursors to metal chalcogenide compounds.


  • Open Access

    Unraveling the Effect of Compositional Ratios on the Kesterite Thin-Film Solar Cells Using Machine Learning Techniques

    by Vijay C. Karade, Santosh S. Sutar, Jun Sung Jang, Kuldeep Singh Gour, Seung Wook Shin, Mahesh P. Suryawanshi, Rajanish K. Kamat, Tukaram D. Dongale, Jin Hyeok Kim, Jae Ho Yun

    In the Kesterite family, the Cu2ZnSn(S,Se)4 (CZTSSe) thin-film solar cells (TFSCs) have demonstrated the highest device efficiency with non-stoichiometric cation composition ratios. These composition ratios have a strong influence on the structural, optical, and electrical properties of the CZTSSe absorber layer. So, in this work, a machine learning (ML) approach is employed to evaluate effect composition ratio on the device parameters of CZTSSe TFSCs. In particular, the bi-metallic ratios like Cu/Sn, Zn/Sn, Cu/Zn, and overall Cu/(Zn+Sn) cation composition ratio are investigated. To achieve this, different machine learning algorithms, such as decision trees (DTs) and classification and regression trees (CARTs), are used. In addition, the output performance parameters of CZTSSe TFSCs are predicted by both continuous and categorical approaches. Artificial neural networks (ANN) and XGBoost (XGB) algorithms are employed for the continuous approach. On the other hand, support vector machine and k-nearest neighbor’s algorithms are also used for the categorical approach. Through the analysis, it is observed that the DT and CART algorithms provided a critical composition range well suited for the fabrication of highly efficient CZTSSe TFSCs, while the XGB and ANN showed better prediction accuracy among the tested algorithms. The present work offers valuable guidance towards the integration of the ML approach with experimental studies in the field of TFSCs.


  • Rapid Synthesis of Ultrathin Ni:FeOOH with In Situ-Induced Oxygen Vacancies for Enhanced Water Oxidation Activity and Stability of BiVO4 Photoanodes

    by Mayur A. Gaikwad, Uma V. Ghorpade, Umesh P. Suryawanshi, Priyank V. Kumar, Suyoung Jang, Jun Sung Jang, Lan Tran, Jong-Sook Lee, Hyojung Bae, Seung Wook Shin, et al.

    The coupling of oxygen evolution reaction (OER) catalysts with photoanodes is a promising strategy for enhancing the photoelectrochemical (PEC) performance by passivating photoanode's surface defect states and facilitating charge transfer at the photoanode/electrolyte interface. However, a serious interface recombination issue caused by poor interface and OER catalysts coating quality often limits further performance improvement of photoanodes. Herein, a rapid Fenton-like reaction method is demonstrated to produce ultrathin amorphous Ni:FeOOH catalysts with in situ-induced oxygen vacancies (Vo) to improve the water oxidation activity and stability of BiVO4 photoanodes. The combined physical characterizations, PEC studies, and density functional theory calculations revealed that the reductive environment in a Fenton-like reaction in situ produces abundant Vo in Ni:FeOOH catalysts, which significantly improves charge separation and charge transfer efficiency of BiVO4 while also offering abundant active sites and a reduced energy barrier for OER. As a result, Ni:FeOOH-Vo catalysts yielded a more than 2-fold increased photocurrent density in the BiVO4 photoanode (from 1.54 to 4.15 mA cm-2 at 1.23 VRHE), accompanied by high stability for 5 h. This work not only highlights the significance of abundant Vo in catalysts but also provides new insights into the rational design and fabrication of efficient and stable solar water-splitting systems.


  • Understanding defects and band tailing characteristics and their impact on the device performance of Cu 2 ZnSn(S,Se) 4 solar cells

    by Vijay C. Karade, Mahesh P. Suryawanshi, Jun Sung Jang, Kuldeep Singh Gour, Suyoung Jang, Jongsung Park, Jin Hyeok Kim, Seung Wook Shin

    The Raman analysis of Cu 2 ZnSn(S,Se) 4 thin films revealed a change in the relative defect concentration and device performance with composition.


  • Influence of the Reaction Pathway on the Defect Formation in a Cu2ZnSnSe4 Thin Film

    by Hyesun Yoo, Jun Sung Jang, Seung Wook Shin, Jiwon Lee, JunHo Kim, Dong Myeong Kim, In Jae Lee, Byeong Hoon Lee, Jongsung Park, Jin Hyeok Kim

    Point defect engineering in Cu2ZnSnSe4 (CZTSe) thin films is the main issue to improve its device performance. This study reveals the correlation between the reaction pathway and the point defects in the CZTSe film. The reaction pathway from a metallic precursor (Mo/Zn/Sn/Cu) to a kesterite CZTSe film is varied by changing the annealing process. The synthesized CZTSe films under different reaction pathways induce different device performances with different defect energy levels, although all CZTSe films have similar structural and optical properties (Eg ∼ 1.0 eV). The admittance spectroscopy demonstrates the correlations between point defect types (VZn, ZnSn, ZnCu, CuZn, and VCu) and the reaction pathways for the formation of CZTSe films. The different growth rates of binary selenides, such as ZnSe and/or Sn–Se phases, during the annealing process are especially strongly related to the formation of point defects, leading to the different open-circuit voltages (396–451 mV) and fill factors (51–65%). The results of this study suggest that controlling the reaction pathway is an effective approach to adjust the formation of defects in the kesterite CZTSe film as well as to fabricate high-performance solar cell devices.


  • A Facile Process for Partial Ag Substitution in Kesterite Cu2ZnSn(S,Se)4 Solar Cells Enabling a Device Efficiency of over 12%

    by Myeng Gil Gang, Vijay C. Karade, Mahesh P. Suryawanshi, Hyesun Yoo, Mingrui He, Xiaojing Hao, In Jae Lee, Byeong Hoon Lee, Seung Wook Shin, Jin Hyeok Kim

    A cation substitution in Cu2ZnSn(S,Se)4 (CZTSSe) offers a viable strategy to reduce the open-circuit voltage (Voc)-deficit by altering the characteristics of band-tail states, antisite defects, and related defect clusters. Herein, we report a facile single process, i.e., simply introducing a thin Ag layer on a metallic precursor, to effectively improve the device characteristics and performances in kesterite (Agx,Cu1–x)2ZnSn(Sy,Se1–y)4 (ACZTSSe) solar cells. Probing into the relationship between the external quantum efficiency derivative (dEQE/dλ) and device performances revealed the Voc-deficit characteristics in the ACZTSSe solar cells as a function of Cu and Ag contents. The fabricated champion ACZTSSe solar cell device showed an efficiency of 12.07% and a record low Voc-deficit of 561 mV. Thorough investigations into the mechanism underpinning the improved performance in the ACZTSSe device further revealed the improved band-tailing characteristic, effective minority carrier lifetime, and diode factors as well as reduced antisite defects and related defect clusters as compared to the CZTSSe device. This study demonstrates the feasibility of effectively suppressing antisite defects, related defect clusters, and band-tailing characteristics by simply introducing a thin Ag layer on a metallic precursor in the kesterite solar cells, which in turn effectively reduces the Voc-deficit.