Imrose Bin Muhit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Imrose Bin Muhit has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Delbaz Samadian
School of Computing, Engineering, and Digital Technologies, Teesside University, Middlesbrough, UK
5 shared publications - Amin Al-Fakih
Department of Civil and Environmental Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia
3 shared publications - Annalisa Occhipinti
Teesside University
3 shared publications Nashwan Dawood
3 shared publicationsMark G. Stewart
2 shared publications- Nashwan Dawood
Teesside University
2 shared publications
Latest Publications
- 13 October 2026
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- p. 1-29
Life cycle environmental and cost analysis of a building insulated with different insulation materials: a British case study
Purpose: To evaluate the whole-life environmental and economic performance of four insulation materials used in the UK, hemp fibre, wood fibre, glass wool and extruded polystyrene (XPS), by comparing their embodied and operational impacts within a consistent regulatory and modelling framework. Design/methodology/approach: A like-for-like assessment was conducted for a representative British single-family dwelling by integrating dynamic energy simulation with life cycle assessment (LCA) and life cycle costing (LCC) within a cradle-to-grave framework aligned with EN 15978 and EN 15804. Operational energy demand (Module B6) was simulated using DesignBuilder/EnergyPlus. Embodied impacts across Modules A1–A5 and end-of-life Modules C1–C4 were calculated in One Click LCA using Environmental Product Declarations and aligned generic datasets. Whole-life costs were evaluated over a 70-year study period using discounted cash-flow analysis. Findings: Operational energy dominates whole-life impacts for all insulation options, with annual energy use ranging from 11,598 to 11,833 kWh and minimal variation due to equivalent regulatory U-value targets. Whole-life global warming potential is similarly close (≈2,342–2,418 kgCO2e/m2, excluding Module D), with hemp fibre and glass wool showing slightly lower values. Embodied impacts (A1–A5) differ more clearly, favouring hemp fibre and glass wool over wood fibre and XPS. LCC results are tightly clustered (NPV ≈ £49.2k–£49.4k; ≈ £1.89k/year), suggesting cost is not a key differentiator. Originality/value: The study offers a UK-specific integrated comparison combining dynamic simulation, LCA and LCC, highlighting that while insulation choice affects embodied carbon, major carbon reductions depend primarily on reducing and decarbonising operational energy.
- 13 October 2026
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- p. 1-29
Life cycle environmental and cost analysis of a building insulated with different insulation materials: a British case study
Purpose: To evaluate the whole-life environmental and economic performance of four insulation materials used in the UK, hemp fibre, wood fibre, glass wool and extruded polystyrene (XPS), by comparing their embodied and operational impacts within a consistent regulatory and modelling framework. Design/methodology/approach: A like-for-like assessment was conducted for a representative British single-family dwelling by integrating dynamic energy simulation with life cycle assessment (LCA) and life cycle costing (LCC) within a cradle-to-grave framework aligned with EN 15978 and EN 15804. Operational energy demand (Module B6) was simulated using DesignBuilder/EnergyPlus. Embodied impacts across Modules A1–A5 and end-of-life Modules C1–C4 were calculated in One Click LCA using Environmental Product Declarations and aligned generic datasets. Whole-life costs were evaluated over a 70-year study period using discounted cash-flow analysis. Findings: Operational energy dominates whole-life impacts for all insulation options, with annual energy use ranging from 11,598 to 11,833 kWh and minimal variation due to equivalent regulatory U-value targets. Whole-life global warming potential is similarly close (≈2,342–2,418 kgCO2e/m2, excluding Module D), with hemp fibre and glass wool showing slightly lower values. Embodied impacts (A1–A5) differ more clearly, favouring hemp fibre and glass wool over wood fibre and XPS. LCC results are tightly clustered (NPV ≈ £49.2k–£49.4k; ≈ £1.89k/year), suggesting cost is not a key differentiator. Originality/value: The study offers a UK-specific integrated comparison combining dynamic simulation, LCA and LCC, highlighting that while insulation choice affects embodied carbon, major carbon reductions depend primarily on reducing and decarbonising operational energy.
- Open Access
- 12 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Introducing energy-based seismic and flood demand (EBSFD) for multi-hazard vulnerability analysis of buildings
- 12 June 2026
- Published by Elsevier in Journal of Building Engineering
- Vol. 128
Open AccessIntroducing energy-based seismic and flood demand (EBSFD) for multi-hazard vulnerability analysis of buildings
- Open Access
- 6 April 2026
- Published by Elsevier in Structures
- Vol. 88
An interpretable machine learning approach for shear capacity prediction of prestressed UHPC bridge girders with GUI deployment
- 6 April 2026
- Published by Elsevier in Structures
- Vol. 88
Open AccessAn interpretable machine learning approach for shear capacity prediction of prestressed UHPC bridge girders with GUI deployment
- Open Access
- 11 February 2026
- Published by Elsevier in Engineering Structures
- Vol. 353
Stack-AttenLSTM: A surrogate deep learning model for sequential earthquake-flood structural response assessment of steel buildings
- 11 February 2026
- Published by Elsevier in Engineering Structures
- Vol. 353
Open AccessStack-AttenLSTM: A surrogate deep learning model for sequential earthquake-flood structural response assessment of steel buildings
- Open Access
Surrogate-Based Resilience Assessment of SMRF Buildings Under Sequential Earthquake–Flood Hazards
This study presents a framework for assessing the resilience of steel special moment-resisting frame (SMRF) buildings under sequential earthquake–flood hazards. Surrogate models, including a stacked attention-based LSTM network (Stack-AttenLSTM) and CatBoost, are developed to predict key engineering demand parameters (EDPs), particularly maximum inter-storey drift ratios (MIDRs), avoiding the need for computationally expensive nonlinear time history analysis (NLTHA). The predicted EDPs are integrated with the FEMA P-58 methodology to estimate repair costs and durations, while the REDi framework is used to capture recovery delays and functionality loss. A two-storey code-compliant SMRF building is evaluated under a design-basis earthquake (DBE) with and without a subsequent 4.0 m flood. Results show that the combined hazard nearly doubles repair costs (from 0.33 to 0.77 of replacement value), increases downtime from 194 to over 411 days, and reduces the resilience index (Ri) from 0.873 to 0.265. These findings highlight the severe impacts of cascading multi-hazard events and the need to extend performance-based design toward resilience-focused strategies. The proposed surrogate-based framework provides a practical tool for evaluating multi-hazard risks and guiding the design of more resilient structures.
Open AccessSurrogate-Based Resilience Assessment of SMRF Buildings Under Sequential Earthquake–Flood Hazards
This study presents a framework for assessing the resilience of steel special moment-resisting frame (SMRF) buildings under sequential earthquake–flood hazards. Surrogate models, including a stacked attention-based LSTM network (Stack-AttenLSTM) and CatBoost, are developed to predict key engineering demand parameters (EDPs), particularly maximum inter-storey drift ratios (MIDRs), avoiding the need for computationally expensive nonlinear time history analysis (NLTHA). The predicted EDPs are integrated with the FEMA P-58 methodology to estimate repair costs and durations, while the REDi framework is used to capture recovery delays and functionality loss. A two-storey code-compliant SMRF building is evaluated under a design-basis earthquake (DBE) with and without a subsequent 4.0 m flood. Results show that the combined hazard nearly doubles repair costs (from 0.33 to 0.77 of replacement value), increases downtime from 194 to over 411 days, and reduces the resilience index (Ri) from 0.873 to 0.265. These findings highlight the severe impacts of cascading multi-hazard events and the need to extend performance-based design toward resilience-focused strategies. The proposed surrogate-based framework provides a practical tool for evaluating multi-hazard risks and guiding the design of more resilient structures.
- Open Access
- 15 August 2025
- Published by Elsevier in Engineering Failure Analysis
- Vol. 182
Semi-probabilistic failure analysis of masonry veneer walls under lateral loading using a Discrete Macro-Element Model
- 15 August 2025
- Published by Elsevier in Engineering Failure Analysis
- Vol. 182
Open AccessSemi-probabilistic failure analysis of masonry veneer walls under lateral loading using a Discrete Macro-Element Model
- 13 December 2024
- Published by Springer Nature
- p. 360-373
Discrete Macro Element Modelling of URM Veneer Walls Subjected to Out-Of-Plane Loads
- 13 December 2024
- Published by Springer Nature
- p. 360-373
Discrete Macro Element Modelling of URM Veneer Walls Subjected to Out-Of-Plane Loads
- 27 September 2024
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- Vol. 14 (7) , 2201-2234
Comprehensive sustainability assessment of Ferrock: innovations for the sustainable built environment
This study aims to evaluate the suitability of Ferrock as a green construction material by analysing its engineering properties, environmental impact, economic viability and adoption challenges. It also aims to bridge knowledge gaps and provide guidance for integrating Ferrock into mainstream construction to support the decarbonisation of the built environment. It presents a systematic and holistic review of existing literature on Ferrock, comprehensively analysing its mechanical properties, environmental and socio-economic impact and adoption challenges. The approach includes evaluating both quantitative and qualitative data to assess Ferrock’s potential in the construction sector. Key findings highlight Ferrock’s superior mechanical properties, such as higher compressive and tensile strength, and enhanced durability compared to traditional Portland cement. Ferrock offers significant environmental benefits by capturing more CO2 during curing than it emits, contributing to carbon sequestration and reducing energy consumption due to the absence of high-temperature processing. However, the material faces economic and technical challenges, including higher initial costs, scalability issues, lack of industry standards and variability in production quality. This review provides a comprehensive and up-to-date analysis of Ferrock. Despite being discussed for a decade, Ferrock research has been overlooked, with existing studies often limited and published in poor-quality sources. By synthesising current research and identifying future study areas, the paper enhances understanding of Ferrock’s potential benefits and challenges. The originality lies in the holistic evaluation of Ferrock’s properties and its implications for the construction industry, offering insights that could drive collaborative research and policy support to facilitate its integration into mainstream use.
- 27 September 2024
- Published by Emerald Publishing in Smart and Sustainable Built Environment
- Vol. 14 (7) , 2201-2234
Comprehensive sustainability assessment of Ferrock: innovations for the sustainable built environment
This study aims to evaluate the suitability of Ferrock as a green construction material by analysing its engineering properties, environmental impact, economic viability and adoption challenges. It also aims to bridge knowledge gaps and provide guidance for integrating Ferrock into mainstream construction to support the decarbonisation of the built environment. It presents a systematic and holistic review of existing literature on Ferrock, comprehensively analysing its mechanical properties, environmental and socio-economic impact and adoption challenges. The approach includes evaluating both quantitative and qualitative data to assess Ferrock’s potential in the construction sector. Key findings highlight Ferrock’s superior mechanical properties, such as higher compressive and tensile strength, and enhanced durability compared to traditional Portland cement. Ferrock offers significant environmental benefits by capturing more CO2 during curing than it emits, contributing to carbon sequestration and reducing energy consumption due to the absence of high-temperature processing. However, the material faces economic and technical challenges, including higher initial costs, scalability issues, lack of industry standards and variability in production quality. This review provides a comprehensive and up-to-date analysis of Ferrock. Despite being discussed for a decade, Ferrock research has been overlooked, with existing studies often limited and published in poor-quality sources. By synthesising current research and identifying future study areas, the paper enhances understanding of Ferrock’s potential benefits and challenges. The originality lies in the holistic evaluation of Ferrock’s properties and its implications for the construction industry, offering insights that could drive collaborative research and policy support to facilitate its integration into mainstream use.