Maryam Pazoki
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Maryam Pazoki has a total of 73 co-authors. Here are the top co-authors by number of shared publications:
Reza Ghasemzadeh
Department of Environmental Engineering, Graduate Faculty of Environment, University of Tehran, Tehran, Iran
10 shared publications- Hugo A. Loaiciga
Department of Geography, University of California, Santa Barbara, USA
5 shared publications - Omid Bozorg-Haddad
Department of Irrigation & Reclamation Engineering, Faculty of Agricultural Engineering & Technology, College of Agriculture & Natural Resources, University of Tehran, Karaj, Tehran, Iran
5 shared publications Peyman Dalaei
Department of Environmental Engineering University of Tehran Tehran IR Iran
3 shared publicationsReza Ghasemzade
Graduate Faculty of Environment, University of Tehran, P.O.Box 14155-6135, Tehran, Iran
3 shared publications- Ali Akbar Shayesteh
School of Environment, College of Engineering, University of Tehran, Tehran 14174, Iran
2 shared publications
Latest Publications
- Open Access
- 23 October 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 253
High-yield biolubricant synthesis from waste cooking oil employing optimized dual-step transesterification
- 23 October 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 253
Open AccessHigh-yield biolubricant synthesis from waste cooking oil employing optimized dual-step transesterification
- Open Access
- 25 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
From landfilling to selective demolition: A facility-level LCA and LCC comparison of construction and demolition waste management Pathways at Tehran's Abali complex
- 25 August 2026
- Published by Elsevier in Results in Engineering
- Vol. 32
Open AccessFrom landfilling to selective demolition: A facility-level LCA and LCC comparison of construction and demolition waste management Pathways at Tehran's Abali complex
- Open Access
- 18 August 2024
- Published by Brieflands in Jundishapur Journal of Health Sciences
- Vol. 16 (3)
Assessing Greenhouse Gas Emissions and Methane Production During Post-Landfill Maintenance in Kish Island: A LandGEM Simulation Approach
Background: Municipal solid waste (MSW) landfills are significant contributors to the emission of greenhouse gases, particularly methane, during the breakdown of waste materials. Researchers have undertaken extensive investigations into quantifying methane emissions from landfills, utilizing various methodologies beyond reliance on the LandGEM model. Numerous studies have underscored the efficacy of this model in predicting methane generation and exploring its utility in activities such as energy generation and emission mitigation strategies. Objectives: Municipal solid waste landfills are vital contributors to greenhouse gas emissions, notably methane, during waste decomposition. Significant research has focused on estimating methane output from landfills, utilizing various approaches beyond the LandGEM model. Studies highlight the model's potential in assessing methane generation and its relevance to activities like energy generation and emission management. Methods: The LandGEM simulation model is employed to forecast future waste generation and provide valuable insights into the environmental consequences of landfill management on the island. By analyzing population data and waste generation statistics from 2023 to 2042, the study utilizes the LandGEM software to estimate methane emissions, incorporating site-specific data and waste composition analysis. Results: The findings reveal that 36% of the total waste on Kish Island consists of putrescible material, with food waste being a significant component. Over the study period, approximately 1,282,637 tons of waste are projected to be disposed of in the Kish landfill. The LandGEM model predicts the highest landfill gas emission in 2043, primarily methane, along with carbon dioxide and non-metallic organic compounds. The estimated quantities for these gases in 2043 are 5.415E+03, 1.486E+04, and 2.327E+02 metric tons, respectively. Conclusions: This research highlights the importance of tailored waste management strategies to mitigate environmental impacts and emphasizes the need for efficient gas collection systems. A proposed gas collection system combining vertical wells, horizontal trenches, and under-membrane pipes is discussed to enhance efficiency and reduce environmental risks. The study provides valuable insights into waste management and landfill gas emissions on Kish Island, underscoring the significance of accurate emission prediction and effective management to minimize environmental consequences and optimize the utilization of renewable energy resources.
- 18 August 2024
- Published by Brieflands in Jundishapur Journal of Health Sciences
- Vol. 16 (3)
Open AccessAssessing Greenhouse Gas Emissions and Methane Production During Post-Landfill Maintenance in Kish Island: A LandGEM Simulation Approach
Background: Municipal solid waste (MSW) landfills are significant contributors to the emission of greenhouse gases, particularly methane, during the breakdown of waste materials. Researchers have undertaken extensive investigations into quantifying methane emissions from landfills, utilizing various methodologies beyond reliance on the LandGEM model. Numerous studies have underscored the efficacy of this model in predicting methane generation and exploring its utility in activities such as energy generation and emission mitigation strategies. Objectives: Municipal solid waste landfills are vital contributors to greenhouse gas emissions, notably methane, during waste decomposition. Significant research has focused on estimating methane output from landfills, utilizing various approaches beyond the LandGEM model. Studies highlight the model's potential in assessing methane generation and its relevance to activities like energy generation and emission management. Methods: The LandGEM simulation model is employed to forecast future waste generation and provide valuable insights into the environmental consequences of landfill management on the island. By analyzing population data and waste generation statistics from 2023 to 2042, the study utilizes the LandGEM software to estimate methane emissions, incorporating site-specific data and waste composition analysis. Results: The findings reveal that 36% of the total waste on Kish Island consists of putrescible material, with food waste being a significant component. Over the study period, approximately 1,282,637 tons of waste are projected to be disposed of in the Kish landfill. The LandGEM model predicts the highest landfill gas emission in 2043, primarily methane, along with carbon dioxide and non-metallic organic compounds. The estimated quantities for these gases in 2043 are 5.415E+03, 1.486E+04, and 2.327E+02 metric tons, respectively. Conclusions: This research highlights the importance of tailored waste management strategies to mitigate environmental impacts and emphasizes the need for efficient gas collection systems. A proposed gas collection system combining vertical wells, horizontal trenches, and under-membrane pipes is discussed to enhance efficiency and reduce environmental risks. The study provides valuable insights into waste management and landfill gas emissions on Kish Island, underscoring the significance of accurate emission prediction and effective management to minimize environmental consequences and optimize the utilization of renewable energy resources.
- Open Access
- 14 May 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (8) , 4905
Correction to: Synthesis of MIL-68 (Al) Catalyst and Optimization of Green Biodiesel Production from Waste Cooking Oil
- 14 May 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (8) , 4905
Open AccessCorrection to: Synthesis of MIL-68 (Al) Catalyst and Optimization of Green Biodiesel Production from Waste Cooking Oil
- 12 April 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (8) , 4885-4904
Synthesis of MIL-68 (Al) Catalyst and Optimization of Green Biodiesel Production from Waste Cooking Oil
- 12 April 2024
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (8) , 4885-4904
Synthesis of MIL-68 (Al) Catalyst and Optimization of Green Biodiesel Production from Waste Cooking Oil
- 12 December 2023
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 10 (2) , 2295-2308
Evaluation of the vulnerability and pathways of groundwater pollution in the Zanjanrud river basin by an integrated modeling approach
- 12 December 2023
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 10 (2) , 2295-2308
Evaluation of the vulnerability and pathways of groundwater pollution in the Zanjanrud river basin by an integrated modeling approach
- 30 January 2023
- Published by Springer Nature in International Journal of Energy and Water Resources
- Vol. 7 (1) , 29-41
Optimization of parameters that affect biogas production of anaerobic digestion using a particle swarm algorithm
- 30 January 2023
- Published by Springer Nature in International Journal of Energy and Water Resources
- Vol. 7 (1) , 29-41
Optimization of parameters that affect biogas production of anaerobic digestion using a particle swarm algorithm
- 10 December 2022
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 9 (2) , 2183-2198
Optimization of biomass production from sugar bagasse in anaerobic digestion using genetic algorithm
- 10 December 2022
- Published by Springer Nature in Modeling Earth Systems and Environment
- Vol. 9 (2) , 2183-2198
Optimization of biomass production from sugar bagasse in anaerobic digestion using genetic algorithm
- 1 January 2021
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 7 (1) , 349-366
THERMODYNAMIC ASSESSMENT AND OPTIMIZATION OF A NOVEL TRIGENERATION ENERGY SYSTEM BASED ON SOLAR ENERGY AND MSW GASIFICATION USING ENERGY AND EXERGY CONCEPT
The current study aimed at delving into the thermodynamic study of a trigeneration cycle based on biomass fuel, combined with an Organic Rankine Cycle (ORC) and an absorption chiller. Biomass fuel is purely produced from Municipal Solid Waste (MSW). Energy and exergy analyses were carried out using the solar collector employing optimized characteristics to provide the required thermal energy at the ideal condition to utilizing in the high-temperature gasification process having hot steam. For supplying electricity, heating and cooling power, a Rankine cycle including a turbine, a heater, and a single effect absorption chiller was considered. To solar energy exploitation, a parabolic trough solar collector and hot steam gasifier were utilized. ORC can efficiently recover low-grade waste heat due to its excellent thermodynamic performance. Based on the examinations, the effects of critical thermodynamic parameters on the exergy efficiency and optimization of the trigeneration cycle and ORC with R134a, as working fluid, was conducted to achieve the system optimization design from thermodynamic aspect through Genetic Algorithm (GA). In this study, exergy destruction and its percentage in the power generation process were calculated as well. Results indicated that the studied system has the potential to generate 11.2 kW electricity, 17.4 kW heating power, 15.3 kW cooling power with the energy and exergy efficiencies of 64.3 % and 52%. It was also revealed that the output power of this system is fixed on the constant amount of 11.2 KW, which is obtained from the microturbine and ORC turbine. Additionally, it was demonstrated that the most exergy destructions are for gasifier, compressor, and combustor respectively, containing 47 %, 26.3 % and 14 % of the destructions. Finally, the optimized performance of the system was determined using GA and exergy efficiency as an objective function. The optimized trigeneration energy system could yield the exergy efficiency of 4.4%.
- 1 January 2021
- Published by Yildiz Technical University in Journal of Thermal Engineering
- Vol. 7 (1) , 349-366
THERMODYNAMIC ASSESSMENT AND OPTIMIZATION OF A NOVEL TRIGENERATION ENERGY SYSTEM BASED ON SOLAR ENERGY AND MSW GASIFICATION USING ENERGY AND EXERGY CONCEPT
The current study aimed at delving into the thermodynamic study of a trigeneration cycle based on biomass fuel, combined with an Organic Rankine Cycle (ORC) and an absorption chiller. Biomass fuel is purely produced from Municipal Solid Waste (MSW). Energy and exergy analyses were carried out using the solar collector employing optimized characteristics to provide the required thermal energy at the ideal condition to utilizing in the high-temperature gasification process having hot steam. For supplying electricity, heating and cooling power, a Rankine cycle including a turbine, a heater, and a single effect absorption chiller was considered. To solar energy exploitation, a parabolic trough solar collector and hot steam gasifier were utilized. ORC can efficiently recover low-grade waste heat due to its excellent thermodynamic performance. Based on the examinations, the effects of critical thermodynamic parameters on the exergy efficiency and optimization of the trigeneration cycle and ORC with R134a, as working fluid, was conducted to achieve the system optimization design from thermodynamic aspect through Genetic Algorithm (GA). In this study, exergy destruction and its percentage in the power generation process were calculated as well. Results indicated that the studied system has the potential to generate 11.2 kW electricity, 17.4 kW heating power, 15.3 kW cooling power with the energy and exergy efficiencies of 64.3 % and 52%. It was also revealed that the output power of this system is fixed on the constant amount of 11.2 KW, which is obtained from the microturbine and ORC turbine. Additionally, it was demonstrated that the most exergy destructions are for gasifier, compressor, and combustor respectively, containing 47 %, 26.3 % and 14 % of the destructions. Finally, the optimized performance of the system was determined using GA and exergy efficiency as an objective function. The optimized trigeneration energy system could yield the exergy efficiency of 4.4%.