Ingrid Tomac
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ingrid Tomac has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Wenpei Ma
University of California San Diego
5 shared publications Mahta Movasat
4 shared publicationsMarte Gutierrez
James R. Paden Chair and Distinguished Professor, Dept. of Civil and Environmental Engineering, Colorado School of Mines, 1012 14th St., Golden, CO 80401
3 shared publicationsWenpei Ma
University of California, San Diego La Jolla CA USA
3 shared publicationsHaohua Chen
Tongji University
2 shared publications- Haohua Chen
Department of Structural Engineering, University of California San Diego, San Diego, USA
2 shared publications
Latest Publications
- Open Access
- 22 September 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (9)
Post‐Wildfire Debris Flow Rheology of Mixed Hydrophobicity Sands
Post‐wildfire debris flows can have devastating effects on structures and transportation lifelines. Surficial sandy soil layers become hydrophobic during wildfires, and post‐wildfire rainfall has been shown to lead to air entrapment and excessive erosion. This paper investigates the internal structure and rheology of the sediment portion of the debris flow matrix, excluding large boulders and large debris. The sediment portion of the debris flow is composed of sands with varying degrees of hydrophobicity, which affects the air‐entrapping process, water content, and mixture behavior. Rheometer measurements are performed using clay, hydrophobic sand, and hydrophilic sand at different air‐to‐water ratios. Fine sand particles have peak air entrapment at 75% hydrophobicity, while coarse sand particles and fine sand‐clay mixtures have peak air entrapment at 100% hydrophobicity. This study also discusses the applicability and limitations of the classical Herschel‐Bulkley fluid model for describing the rheological behavior of such a complex material and proposes new rheological relationships for different flow regimes. This research provides a fundamental understanding of how sand hydrophobicity affects air entrapment in postfire debris flows and alters the rheology of the sediment portion of debris flows.
- 22 September 2026
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 62 (9)
Open AccessPost‐Wildfire Debris Flow Rheology of Mixed Hydrophobicity Sands
Post‐wildfire debris flows can have devastating effects on structures and transportation lifelines. Surficial sandy soil layers become hydrophobic during wildfires, and post‐wildfire rainfall has been shown to lead to air entrapment and excessive erosion. This paper investigates the internal structure and rheology of the sediment portion of the debris flow matrix, excluding large boulders and large debris. The sediment portion of the debris flow is composed of sands with varying degrees of hydrophobicity, which affects the air‐entrapping process, water content, and mixture behavior. Rheometer measurements are performed using clay, hydrophobic sand, and hydrophilic sand at different air‐to‐water ratios. Fine sand particles have peak air entrapment at 75% hydrophobicity, while coarse sand particles and fine sand‐clay mixtures have peak air entrapment at 100% hydrophobicity. This study also discusses the applicability and limitations of the classical Herschel‐Bulkley fluid model for describing the rheological behavior of such a complex material and proposes new rheological relationships for different flow regimes. This research provides a fundamental understanding of how sand hydrophobicity affects air entrapment in postfire debris flows and alters the rheology of the sediment portion of debris flows.
- Open Access
- 8 May 2026
- Published by Springer Nature in AI in Civil Engineering
- Vol. 5 (1)
Predicting post-wildfire debris flow onset using machine learning models on multi-parameter experimental data
- 8 May 2026
- Published by Springer Nature in AI in Civil Engineering
- Vol. 5 (1)
Open AccessPredicting post-wildfire debris flow onset using machine learning models on multi-parameter experimental data
- Open Access
- 5 February 2026
- Published by Wiley
Post-Wildfire Debris Flow Rheology of Mixed Hydrophobicity Sands
Post-wildfire debris flows can have devestating effects on structures and transportation lifelines. Surficial sandy soil layers become hydrophobic during wildfires, and post-wildfire rainfall have been shown to lead to air entrapment and excessive erosion. This paper investigates the internal structure and rheology of the sediment portion of the debris flow matrix, excluding large boulders and large debris. The sediment portion of the debris flow is composed of sands with varying degrees of hydrophobicity which affects the air-entrapping process, water content and mixture behavior. Rheometer measurements are performed using clay, hydrophobic sand, and hydrophilic sand at different air-to-water ratios. Fine sand particles have peak air entrapment at 75% hydrophobicity, while coarse sand particles and fine sand-clay mixutres have peak air entrapment at 100% hydrophobicity. This study also discusses the applicability and limitations of the classical Herschel-Bulkley fluid model for describing the rheological behavior of such a complex material, and proposes new rheological relationships for different flow regimes. This research provides a fundamental understanding of how sand hydrophobicity affects air entrapment in postfire debris flows and alters the rheology of the sediment portion of debris flows.
- 5 February 2026
- Published by Wiley
Open AccessPost-Wildfire Debris Flow Rheology of Mixed Hydrophobicity Sands
Post-wildfire debris flows can have devestating effects on structures and transportation lifelines. Surficial sandy soil layers become hydrophobic during wildfires, and post-wildfire rainfall have been shown to lead to air entrapment and excessive erosion. This paper investigates the internal structure and rheology of the sediment portion of the debris flow matrix, excluding large boulders and large debris. The sediment portion of the debris flow is composed of sands with varying degrees of hydrophobicity which affects the air-entrapping process, water content and mixture behavior. Rheometer measurements are performed using clay, hydrophobic sand, and hydrophilic sand at different air-to-water ratios. Fine sand particles have peak air entrapment at 75% hydrophobicity, while coarse sand particles and fine sand-clay mixutres have peak air entrapment at 100% hydrophobicity. This study also discusses the applicability and limitations of the classical Herschel-Bulkley fluid model for describing the rheological behavior of such a complex material, and proposes new rheological relationships for different flow regimes. This research provides a fundamental understanding of how sand hydrophobicity affects air entrapment in postfire debris flows and alters the rheology of the sediment portion of debris flows.
- Open Access
- 13 October 2025
- Published by Wiley
Evolution of Sediment Granular Characteristics Carried by Hurricane Hilary-Induced Post-Wildfire Debris Flows
Debris flow deposits in the San Bernardino Forest after Hurricane Hillary have granular characteristics that evolve along the downhill flow paths. The El Dorado wildfire in 2020 affected 22,744 acres of land between Riverside and San Bernardino counties. In 2023, Tropical Storm Hilary caused major flooding in the San Bernardino area, inducing a post-wildfire debris flow in Oak Glen. Sediment characterisation during the rapid reconnaissance following the debris flow included across-scale measurement of granulometry, particle specific gravity, in situ density of settled sediment yield, physical characteristics like sphericity and roundness of grains, chemical content, as well as microscopic and scanning electron microscopy of selected sample batches. Debris samples from three locations in the San Bernardino area represent settled and transported particles at different elevations and over a maximum distance of 4.5 km. Results indicate that particles transported over longer distances exhibit a decrease in roundness and sphericity compared to samples that traveled shorter distances. In addition, the decrease in grain size along the flow path potentially indicates particle breakage. In contrast, the reduction in roundness and sphericity of deposited particles along the transported path indicates particle surficial damage during flow and transport, indicating dynamic processes that affect the internal structure of post-wildfire debris flow.
- 13 October 2025
- Published by Wiley
Open AccessEvolution of Sediment Granular Characteristics Carried by Hurricane Hilary-Induced Post-Wildfire Debris Flows
Debris flow deposits in the San Bernardino Forest after Hurricane Hillary have granular characteristics that evolve along the downhill flow paths. The El Dorado wildfire in 2020 affected 22,744 acres of land between Riverside and San Bernardino counties. In 2023, Tropical Storm Hilary caused major flooding in the San Bernardino area, inducing a post-wildfire debris flow in Oak Glen. Sediment characterisation during the rapid reconnaissance following the debris flow included across-scale measurement of granulometry, particle specific gravity, in situ density of settled sediment yield, physical characteristics like sphericity and roundness of grains, chemical content, as well as microscopic and scanning electron microscopy of selected sample batches. Debris samples from three locations in the San Bernardino area represent settled and transported particles at different elevations and over a maximum distance of 4.5 km. Results indicate that particles transported over longer distances exhibit a decrease in roundness and sphericity compared to samples that traveled shorter distances. In addition, the decrease in grain size along the flow path potentially indicates particle breakage. In contrast, the reduction in roundness and sphericity of deposited particles along the transported path indicates particle surficial damage during flow and transport, indicating dynamic processes that affect the internal structure of post-wildfire debris flow.
- Open Access
- 13 September 2025
- Published by Elsevier in Geomechanics for Energy and the Environment
- Vol. 44
Post-wildfire soil hydrophobicity and slope erosion remediation by applying environmentally friendly modifiers
- 13 September 2025
- Published by Elsevier in Geomechanics for Energy and the Environment
- Vol. 44
Open AccessPost-wildfire soil hydrophobicity and slope erosion remediation by applying environmentally friendly modifiers
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-18
Kinematics of post-wildfire debris flow initiation mechanism: impact of hydrophobic layer spatial variability and particle size
Post-wildfire debris flow events have been more frequent due to climate change and increased wildfire adversity. Changes in noncohesive soil hydrophobicity, burn, and vegetation removal during wildfires dramatically enhance slopes’ vulnerability to rainfall-induced failure in the arid Southwest USA and similar areas worldwide. This paper contributes to a better understanding the hydrophobic sand slope failure mechanism using experiments and theory. In total, 36 indoor raining experiments use different configurations of fine, medium, and coarse hydrophobic sands subjected to various rain intensities on different slope inclinations. Specific findings contribute to understanding how the spatial variability of the post-wildfire hydrophobic layer, concerning depth and the sand grain size variations, affects the slope failure mechanisms. Clarifying slope failure mechanisms in different layouts is crucial for understanding the initiation and further spatiotemporal debris flow evolution. Results indicate that the surficial hydrophobic layer fails because erosion develops simultaneously from many small failure patches. Erosion pattern, time to failure, water, and sediment overflow temporal dynamics correlate to the dominant sand grain size. Furthermore, seepage-induced shallow infinite slope occurs when the hydrophobic sand layer develops below the surface. Finally, this study identifies the fine sand as the most vulnerable to failure in both configurations.
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 62, 1-18
Kinematics of post-wildfire debris flow initiation mechanism: impact of hydrophobic layer spatial variability and particle size
Post-wildfire debris flow events have been more frequent due to climate change and increased wildfire adversity. Changes in noncohesive soil hydrophobicity, burn, and vegetation removal during wildfires dramatically enhance slopes’ vulnerability to rainfall-induced failure in the arid Southwest USA and similar areas worldwide. This paper contributes to a better understanding the hydrophobic sand slope failure mechanism using experiments and theory. In total, 36 indoor raining experiments use different configurations of fine, medium, and coarse hydrophobic sands subjected to various rain intensities on different slope inclinations. Specific findings contribute to understanding how the spatial variability of the post-wildfire hydrophobic layer, concerning depth and the sand grain size variations, affects the slope failure mechanisms. Clarifying slope failure mechanisms in different layouts is crucial for understanding the initiation and further spatiotemporal debris flow evolution. Results indicate that the surficial hydrophobic layer fails because erosion develops simultaneously from many small failure patches. Erosion pattern, time to failure, water, and sediment overflow temporal dynamics correlate to the dominant sand grain size. Furthermore, seepage-induced shallow infinite slope occurs when the hydrophobic sand layer develops below the surface. Finally, this study identifies the fine sand as the most vulnerable to failure in both configurations.
- Open Access
- 1 November 2024
- Published by Springer Nature in Geothermal Energy
- Vol. 12 (1) , 1-28
Feasibility of coaxial deep borehole heat exchangers in southern California
This paper investigates the feasibility of coaxial deep borehole heat exchanger (CDBHE) applications to the University of California San Diego (UCSD) campus. By collecting different geophysical source data for various formations and well logs around the UCSD campus, a multilayered thermophysical model for the ground on the site is established. Water circulation within a closed coaxial loop system considers the geothermal energy extraction under uncertainty consideration of the unknown deeper layers heat flow gradient as coupled with the variation of pipe insulation properties, flow rates, outer pipe diameter, grout, and depths between 1 and 4 km. A finite-element framework models the Navier–Stokes fluid flow and heat transfer in the CDBHE system, validated with a field test on CDBHE from the literature. Results show that a 4-km CDBHE could produce a thermal power of 600 kW under the optimum geological conditions at the UCSD site: the water flow rate of 2.78 L/s and a ground thermal gradient of 60 ℃/km. Thermal power shares from different layers indicate that deeper formation layers contribute more to the thermal power than the shallower layers because increasing the CDBHE length from 1 to 4 km can lead to a maximum of 900% increase in thermal power and a 50% expansion in thermal plume for a CDBHE with an insulated inner pipe between the upper and lower bound heat flow bounds. An inner pipe with an insulated depth of 2 km produces only 1–6% less power than a fully insulated inner pipe for the 4-km CDBHE, and thus, a partially insulated vacuum-insulated tube (VIT)-plastic inner pipe is suggested as the best practice. Furthermore, the CDBHE thermal power increases by 5% when the grout thermal conductivity increases from 1 to 3.65 W/(K∙m), close to the formation thermal conductivity, and then maintains almost the same, and the 4-km CDBHE with flow rates of 2.78–6.94 L/s at the UCSD site can directly supply a low-temperature heating radiator system for room heating. This study suggests practical ranges for geothermal energy extraction for southern California. A CDBHE with a well-insulated inner pipe of 0.05 W/(m∙K), the thermal power of lower and upper-bound heat flow cases can vary by 60% from the mean. Finally, water as the working fluid is more efficient than CO2, doubling CDBHE's thermal power. The effects of the investigated factors provide guidelines for future geothermal resource exploitation in southern California.
- 1 November 2024
- Published by Springer Nature in Geothermal Energy
- Vol. 12 (1) , 1-28
Open AccessFeasibility of coaxial deep borehole heat exchangers in southern California
This paper investigates the feasibility of coaxial deep borehole heat exchanger (CDBHE) applications to the University of California San Diego (UCSD) campus. By collecting different geophysical source data for various formations and well logs around the UCSD campus, a multilayered thermophysical model for the ground on the site is established. Water circulation within a closed coaxial loop system considers the geothermal energy extraction under uncertainty consideration of the unknown deeper layers heat flow gradient as coupled with the variation of pipe insulation properties, flow rates, outer pipe diameter, grout, and depths between 1 and 4 km. A finite-element framework models the Navier–Stokes fluid flow and heat transfer in the CDBHE system, validated with a field test on CDBHE from the literature. Results show that a 4-km CDBHE could produce a thermal power of 600 kW under the optimum geological conditions at the UCSD site: the water flow rate of 2.78 L/s and a ground thermal gradient of 60 ℃/km. Thermal power shares from different layers indicate that deeper formation layers contribute more to the thermal power than the shallower layers because increasing the CDBHE length from 1 to 4 km can lead to a maximum of 900% increase in thermal power and a 50% expansion in thermal plume for a CDBHE with an insulated inner pipe between the upper and lower bound heat flow bounds. An inner pipe with an insulated depth of 2 km produces only 1–6% less power than a fully insulated inner pipe for the 4-km CDBHE, and thus, a partially insulated vacuum-insulated tube (VIT)-plastic inner pipe is suggested as the best practice. Furthermore, the CDBHE thermal power increases by 5% when the grout thermal conductivity increases from 1 to 3.65 W/(K∙m), close to the formation thermal conductivity, and then maintains almost the same, and the 4-km CDBHE with flow rates of 2.78–6.94 L/s at the UCSD site can directly supply a low-temperature heating radiator system for room heating. This study suggests practical ranges for geothermal energy extraction for southern California. A CDBHE with a well-insulated inner pipe of 0.05 W/(m∙K), the thermal power of lower and upper-bound heat flow cases can vary by 60% from the mean. Finally, water as the working fluid is more efficient than CO2, doubling CDBHE's thermal power. The effects of the investigated factors provide guidelines for future geothermal resource exploitation in southern California.
- Open Access
- 23 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Analytical and numerical investigation of gravity anchors for floating photovoltaic systems
- 23 October 2024
- Published by Elsevier in Ocean Engineering
- Vol. 313
Open AccessAnalytical and numerical investigation of gravity anchors for floating photovoltaic systems
- Open Access
- 11 April 2024
- Published by Wiley
Air Phase Entrapment Role in Hydrophobic Particle-Water-Air Mixtures Internal Structure and Density
Post-wildfire mudflows, in which more than half of the solids are sand or smaller, destroy the watershed environment, life, and infrastructures. The surficial soil particles turn hydrophobic due to the deposition of combusted organic matter during wildfires. Initiated by raindrops splash, runoff and erosion grow into devastating mudflows, quickly blasting obstacles on the way, and carrying large boulders and debris. The internal composition of post-wildfire mudflows has recently become of interest, intending to understand better mechanisms and transport differences between post-wildfire mudflows and non-post-wildfire mudflows. This paper shows critical new insights into how the air got entrapped during the early stage of mudflow and how air entrapment affects the properties of post-wildfire mudflows as a mixture of air bubbles, water, and hydrophobic sand. This paper proposes and experimentally investigates a new paradigm in which a significant amount of air remains entrapped in post-wildfire mudflow via hydrophobic-particle-air attraction. The mudflow mixture’s internal structure depends on the physical state of small liquid marbles, which are small air bubbles covered by hydrophobic sand particles. This paper quantifies the amount of air trapped under different sand-water volumetric concentrations, the effects of mixing speeds (energy), mixing duration, and sand particle size on the final mudflow internal structure. In addition, this paper proposes an empirical estimation of density reductions due to air entrapment in the mixture during the mixing process.
- 11 April 2024
- Published by Wiley
Open AccessAir Phase Entrapment Role in Hydrophobic Particle-Water-Air Mixtures Internal Structure and Density
Post-wildfire mudflows, in which more than half of the solids are sand or smaller, destroy the watershed environment, life, and infrastructures. The surficial soil particles turn hydrophobic due to the deposition of combusted organic matter during wildfires. Initiated by raindrops splash, runoff and erosion grow into devastating mudflows, quickly blasting obstacles on the way, and carrying large boulders and debris. The internal composition of post-wildfire mudflows has recently become of interest, intending to understand better mechanisms and transport differences between post-wildfire mudflows and non-post-wildfire mudflows. This paper shows critical new insights into how the air got entrapped during the early stage of mudflow and how air entrapment affects the properties of post-wildfire mudflows as a mixture of air bubbles, water, and hydrophobic sand. This paper proposes and experimentally investigates a new paradigm in which a significant amount of air remains entrapped in post-wildfire mudflow via hydrophobic-particle-air attraction. The mudflow mixture’s internal structure depends on the physical state of small liquid marbles, which are small air bubbles covered by hydrophobic sand particles. This paper quantifies the amount of air trapped under different sand-water volumetric concentrations, the effects of mixing speeds (energy), mixing duration, and sand particle size on the final mudflow internal structure. In addition, this paper proposes an empirical estimation of density reductions due to air entrapment in the mixture during the mixing process.
- Open Access
- 23 September 2023
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 9 (1) , 1-32
Technical review on coaxial deep borehole heat exchanger
This review paper summarizes recent developments regarding geothermal exploitation using coaxial deep borehole heat exchangers (DBHE). Specifically, this study focuses on field tests, analytical and semi-analytical approaches, and numerical simulations. First, field tests and applications of coaxial DBHE are summarized and future work for the field tests is suggested. Then, the ongoing analytical and numerical modeling approaches on coaxial DBHE are evaluated regarding the capability and incapability of describing physical behaviors. Lastly, key factors for the design of coaxial DBHE are summarized and discussed based on collected results. Regarding field tests, future work should focus more on (1) long-term performance; (2) effect of groundwater flow within formation and fractures; (3) technology for larger diameter boreholes; (4) new and cheap materials for insulated inner pipe; (5) treatment of fluid, pipe wall, and different working fluid; (6) economic analysis of coaxial DBHE-based geothermal power plant. As for the analytical methods and numerical simulations, it is important to consider the dependence of fluid and formation properties on pressure and temperature. Besides, verification and calibration of empirical models for working fluids other than water such as CO2 should be performed based on laboratory and field tests. Different borehole properties and pump parameters should be optimized to obtain the maximum thermal power of a coaxial DBHE, and an insulated inner pipe is recommended by many researchers. An intermittent working pattern of the DBHE could be more realistic when modeling a DBHE. To further improve the performance of coaxial DBHE, continuous research to enhance heat transfer and working fluid performance is still important.
- 23 September 2023
- Published by Springer Nature in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
- Vol. 9 (1) , 1-32
Open AccessTechnical review on coaxial deep borehole heat exchanger
This review paper summarizes recent developments regarding geothermal exploitation using coaxial deep borehole heat exchangers (DBHE). Specifically, this study focuses on field tests, analytical and semi-analytical approaches, and numerical simulations. First, field tests and applications of coaxial DBHE are summarized and future work for the field tests is suggested. Then, the ongoing analytical and numerical modeling approaches on coaxial DBHE are evaluated regarding the capability and incapability of describing physical behaviors. Lastly, key factors for the design of coaxial DBHE are summarized and discussed based on collected results. Regarding field tests, future work should focus more on (1) long-term performance; (2) effect of groundwater flow within formation and fractures; (3) technology for larger diameter boreholes; (4) new and cheap materials for insulated inner pipe; (5) treatment of fluid, pipe wall, and different working fluid; (6) economic analysis of coaxial DBHE-based geothermal power plant. As for the analytical methods and numerical simulations, it is important to consider the dependence of fluid and formation properties on pressure and temperature. Besides, verification and calibration of empirical models for working fluids other than water such as CO2 should be performed based on laboratory and field tests. Different borehole properties and pump parameters should be optimized to obtain the maximum thermal power of a coaxial DBHE, and an insulated inner pipe is recommended by many researchers. An intermittent working pattern of the DBHE could be more realistic when modeling a DBHE. To further improve the performance of coaxial DBHE, continuous research to enhance heat transfer and working fluid performance is still important.