GWGregory P. Waite

Gregory P. Waite

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Gregory P. Waite has a total of 202 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Remote Sensing of Dynamic Ground Motion via a Moiré-Based Apparatus

    by Adrian A. Moazzam, Nontawat Srisapan, Gregory P. Waite, Durdu Ö. Güney, Roohollah Askari

    Ground-based remote sensing of seismic and geophysical displacements remains a major challenge due to environmental hazards, signal attenuation, and practical deployment limitations of traditional seismometers. In this study, we present a detailed design, implementation, and performance evaluation of a Moiré-based apparatus for remote ground displacement measurement. The system operates by detecting fringe shifts formed between a fixed and a displaced grating, with displacement magnified through controlled angular superposition. We systematically assess each component of the system, including telescope optics, imaging sensors, and grating configurations, to optimize spatial resolution, contrast, and robustness under varying environmental conditions. A digital approach for fringe generation was employed, allowing controlled magnification and improved sensitivity without the need for physical alignment of dual gratings. Indoor experiments under low-turbulence conditions validated the system’s capability to detect displacements as small as 50 μm. Subsequent outdoor trials at different distances demonstrated successful measurement of both square-wave and seismic-like displacements despite increased atmospheric turbulence and wind. The results confirm the system’s ability to perform real-time, long-range, non-contact displacement monitoring with high accuracy and resilience to environmental variability. This study establishes a foundation for the application of Moiré-based sensing in challenging field conditions, including volcanic and seismic zones.

  • Seismic Characterization of Lahars on Volcán de Fuego Toward the Development of a Machine Learning‐Based Detection Algorithm

    by Gustavo Bejar, Gregory P. Waite, Rudiger Escobar‐Wolf, Snehamoy Chatterjee, Ashley Bosa, Amilcar Roca, Jeffrey B. Johnson, Jerry Mock, Armando Pineda

    Lahars are among the most frequent hazards associated with Volcán de Fuego, Guatemala. Despite their recurrence, early detection and automated alerts remain challenging since they often rely on manual monitoring and sparse visual confirmation. Yet, we can harness the high number of flows triggered every rainy season to characterize their seismic signatures and quantify their size and behavior. For this, we used seismic stations located along two active lahar channels on Fuego where this characterization describes a somewhat stable long‐term flow behavior. This work revealed more varied short‐term behavior characterized by increasing seismic activity in the time domain and a shift toward lower frequencies as these flows propagate downstream. Building on this characterization, we implemented K‐nearest neighbor (KNN) based detectors using seismic signal attributes describing samples of the data in the time and frequency domains, as well as statistical functions of these samples. We trained generalized and station‐specific detectors that achieved high accuracy for detecting moderate‐to‐large flows with lower performance for smaller or ambiguous events. We found that root mean square amplitude, a proxy for flow size, appears to control detector performance more than other signal features. The detector is computationally efficient and, in the case of Fuego, did not require additional instrumentation. This framework presents a portable solution for enhancing automated lahar detection while minimizing the use of location‐specific parameters required by other methods.


  • Open Access

    Seismic Characterization of Lahars on Volcán de Fuego Toward the Development of a Machine Learning-Based Detection Algorithm

    by Gustavo Bejar, Gregory P. Waite, Rudiger P. Escobar-Wolf, Snehamoy Chatterjee, Ashley Bosa, Amilcar Roca, Jeffrey B Johnson, Jerry Mock, Armando Pineda

    Lahars are among the most frequent hazards associated with Volcán de Fuego, Guatemala. Despite their recurrence, early detection and automated alerts remain challenging since they often rely on manual monitoring and sparse visual confirmation. Yet, we can harness the high number of flows triggered every rainy season to characterize their seismic signatures and quantify their size and behavior. For this, we used seismic stations located along two active lahar channels on Fuego where this characterization describes a somewhat stable long-term flow behavior. This work revealed more varied short term behavior characterized by increasing seismic activity in the time domain and a shift toward lower frequencies as these flows propagate downstream. Building on this characterization, we implemented K-nearest neighbor (KNN)-based detectors using seismic signal attributes describing samples of the data in the time and frequency domains, as well as statistical functions of these samples. We trained generalized and station-specific detectors that achieved high accuracy for detecting moderate-to-large flows with lower performance for smaller or ambiguous events. We found that root mean square amplitude, a proxy for flow size, appears to control detector performance more than other signal features. The detector is computationally efficient and, in the case of Fuego, did not require additional instrumentation. This framework presents a portable solution for enhancing automated lahar detection while minimizing the use of location-specific parameters required by other methods.

  • Possibility of Fluid Flow Characterization via a Geophysical Signal: Experimental Study on the Krauklis Wave Under Fluid Flow

    by Sananda Ray, Haitao Cao, Gregory P. Waite, Roohollah Askari

    Krauklis waves are generated by pressure disturbances in fluid‐filled cavities and travel along the solid‐fluid interface. Their far‐field radiation, observed in seismic data from volcanoes or hydraulic fracturing, is known as long‐period events. Characterized by low velocity and resonance, Krauklis waves help estimate fracture size and discern fluids in saturated fractures. Despite numerous theoretical models analyzing Krauklis waves, the existing paradigms are founded on static flow conditions. However, in geological contexts, the assumption of static flow may not be valid. We developed an experimental apparatus using a tri‐layer model consisting of a pair of aluminum plates to examine the effect of fluid flow on Krauklis waves. We employed an infusion syringe pump to inject fluids into the fracture under different flow rates. We used water, oil, and an aqueous solution of Polyethylene glycol as fracture fluids. We calculated resonant frequency, phase velocity, and quality factor to characterize the Krauklis waves. Our findings reveal that an increase in flow rate leads to a higher phase velocity, higher quality factor, and a shift to higher resonant frequency when the flow is in the direction of initial wave propagation while decreasing amplitude. Additionally, when the flow is in the opposite direction of initial wave propagation, we note higher wave absorption and distortion of the Krauklis waves. Our observations unequivocally affirm that fluid flow leaves strong signatures on the Krauklis waves, providing a robust basis for characterizing fluid dynamics within geological settings through the analysis of Krauklis wave.


  • Open Access

    A Controlled-Source Physical Model for Long Period Events

    by Sananda Ray, Gregory P. Waite, Roohollah Askari

    Long-period events (LPs) are observed in active volcanoes, hydrothermal systems, and hydraulic fracturing. The prevailing model for LP events suggests that they result from pressure disturbances in fluid-filled cracks that generate slow, dispersive waves known as Krauklis waves. These waves oscillate within the crack, causing it to act as a seismic resonator whose far-field radiations are known as LP events. Since LP events are generated from fluid-filled cracks, they have been used to analyze fluid transport and fracturing in geological settings. Additionally, they are deemed precursors to volcanic eruptions. However, other mechanisms have been proposed to explain LP seismicity. Thus, a robust interpretation of LP events requires understanding all parameters contributing to LP seismicity. To achieve this, for the first time, we have developed a physical model to investigate LP seismicity under controlled-source conditions. The physical model consists of a 30 cm × 15 cm × 0.2 cm crack embedded within a concrete slab with dimensions of 3 m × 3 m × 0.24 m. Using this apparatus, we extensively investigate fundamental factors affecting LP signals, including crack stiffness, fluid viscosity, radiation patterns, and triggering location. Our findings are consistent with the theoretical model for Krauklis waves within a fluid-filled crack. For instance, a reduction in stiffness leads to an increase in resonance frequency, whereas an increase in fluid viscosity results in a decrease in resonance frequency. Thus, this physical model can offer new horizons in understanding LP seismicity and bridge the gap between theoretical models and observed LP signals.

  • Open Access

    Dynamics of rain-triggered lahars and destructive power inferred from seismo-acoustic arrays and time-lapse camera correlation at Volcán de Fuego, Guatemala

    by Ashley R. Bosa, Gustavo Bejar, Gregory P. Waite, Jerry C. Mock, Armando Pineda, Jacob F. Anderson

    Lahars, or volcanic mudflows, are one of the most devastating natural, volcanic hazards. Deadly lahars, such as the one that occurred after the Nevado del Ruiz, Columbia eruption in 1985, in which at least 23,000 people tragically lost their lives, threaten the safety and well-being of humans, the economy, and the infrastructure of many of the communities living in the vicinity of volcanoes. Due to their complex flow behaviors, lahars remain a major challenge to those studying them. We present an analysis of several rain-triggered lahar events at Volcán Fuego in Guatemala using both seismic and infrasound monitoring to quantify both ground vibrations and low-frequency atmospheric sound waves associated with these mudflows. Geophysical data collected over this field campaign quantifies flow parameters such as velocities, stage and the frequency of these rain-triggered lahars. Time-lapse imagery of lahar flows is compared with filtered seismo-acoustic signal characteristics to ascertain stage predictions and relationship to stage fluxes. Using random forest regression models, we establish moderate correlations (correlation coefficient modes 0.48–0.53) with statistical significance (p value = 0.01–0.02) between signal energetics and respective stage. Compiling a catalog of rain-triggered lahar events in Volcán de Fuego’s drainages over a season permits a dataset amenable to statistical analysis. Our goal is the development of new-generation geophysical monitoring tools that will be capable of remote and real-time estimation of flow parameters.


  • Open Access

    Infrasound detection of approaching lahars

    by J. B. Johnson, A. Roca, A. Pineda, R. Mérida, R. Escobar-Wolf, J. F. Anderson, J. Mock, A. Bosa, G. Bejar, G. P. Waite

    Infrasound may be used to detect the approach of hazardous volcanic mudflows, known as lahars, tens of minutes before their flow fronts arrive. We have analyzed signals from more than 20 secondary lahars caused by precipitation events at Fuego Volcano during Guatemala’s rainy season in May through October of 2022. We are able to quantify the capabilities of infrasound monitoring through comparison with seismic data, time lapse camera imagery, and high-resolution video of a well-recorded event on August 17. We determine that infrasound sensors, deployed adjacent to the lahar path and in small-aperture (10 s of meters) arrays, are particularly sensitive to remote detection of lahars, including small-sized events, at distances of at least 5 km. At Fuego Volcano these detections could be used to provide timely alerts of up to 30 min before lahars arrive at a downstream monitoring site, such as in the frequently impacted Ceniza drainage. We propose that continuous infrasound monitoring, from locations adjacent to a drainage, may complement seismic monitoring and serve as a valuable tool to help identify approaching hazards. On the other hand, infrasound arrays located a kilometer or more from the lahar path can be effectively used to track a lahar’s progression.