Ulderico Ulissi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ulderico Ulissi has a total of 93 co-authors. Here are the top co-authors by number of shared publications:
- Stefano Passerini
Karlsruhe Institute of Technology (KIT)/Helmholtz Institute Ulm (HIU), Ulm, Germany
13 shared publications - Jusef Hassoun
Institute of Global Innovation Research (GIR), Tokyo University of Agriculture and Technology, 3-8-1 Harumi-cho, Fuchu-shi, Tokyo 183-8538, Japan
10 shared publications - Giuseppe Antonio Elia
Politecnico di Torino Corso Duca degli Abruzzi 24
5 shared publications Bruno Scrosati
Elettrochimica ed Energia, 00199, Rome, Italy
4 shared publicationsJakub Reiter
BMW Group Petuelring 130 80788 Munich Germany
4 shared publicationsNikolaos Tsiouvaras
BMW Group Petuelring 130 80788 Munich Germany
4 shared publications
Latest Publications
- Open Access
- 20 August 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (10) , 1809-1818
Understanding and suppressing gas evolution in lithium metal batteries with ether-based electrolytes
Understanding and suppressing gas evolution is critical to enabling high-energy-density lithium metal batteries (LMBs). Yet, comprehensive investigations in ether-based systems remain limited. Here we quantify gas generation in ether-based LMBs and elucidate the underlying mechanisms. We link CO and CO2 production to the cathode, and CH4 evolution to the anode. Notably, CO and CO2 are consumed at the Li anode to form Li-containing species such as Li2CO3. Although CH4 ultimately dominates the gaseous products, its evolution during cycling is delayed until a distinct onset point. We show that in a high-concentration ether electrolyte, anode activation improves Li deposition morphology and suppresses interfacial reactions, extending the number of cycles to gas onset and cell failure by an order of magnitude. Achieving these gains without altering the electrolyte enables the reconsideration of seemingly impractical electrolytes, highlighting a practical strategy to enhance the safety and performance of commercial LMBs.
- 20 August 2026
- Published by Springer Nature in Nature Chemistry
- Vol. 18 (10) , 1809-1818
Open AccessUnderstanding and suppressing gas evolution in lithium metal batteries with ether-based electrolytes
Understanding and suppressing gas evolution is critical to enabling high-energy-density lithium metal batteries (LMBs). Yet, comprehensive investigations in ether-based systems remain limited. Here we quantify gas generation in ether-based LMBs and elucidate the underlying mechanisms. We link CO and CO2 production to the cathode, and CH4 evolution to the anode. Notably, CO and CO2 are consumed at the Li anode to form Li-containing species such as Li2CO3. Although CH4 ultimately dominates the gaseous products, its evolution during cycling is delayed until a distinct onset point. We show that in a high-concentration ether electrolyte, anode activation improves Li deposition morphology and suppresses interfacial reactions, extending the number of cycles to gas onset and cell failure by an order of magnitude. Achieving these gains without altering the electrolyte enables the reconsideration of seemingly impractical electrolytes, highlighting a practical strategy to enhance the safety and performance of commercial LMBs.
- Open Access
- 28 May 2025
- Published by Springer Nature in Nature Nanotechnology
- Vol. 20 (8) , 1034-1042
Application-driven design of non-aqueous electrolyte solutions through quantification of interfacial reactions in lithium metal batteries
Unwanted side reactions occurring at electrode|electrolyte interfaces significantly impact the cycling life of lithium metal batteries. However, a comprehensive view that rationalizes these interfacial reactions and assesses them both qualitatively and quantitatively is not yet established. Here, by combining multiple analytical techniques, we systematically investigate the interfacial reactions in lithium metal batteries containing ether-based non-aqueous electrolyte solutions. We quantitatively monitor various nanoscale-driven processes such as the reduction and oxidation pathways of lithium salt and organic solvents, the formation of various solid-electrolyte interphase species, the gas generation within the cell and the cross-talk processes between the electrodes. We demonstrate that the consumption of lithium ions owing to the continuous decomposition of the lithium bis(fluorosulfonyl)imide salt, which dominates the interfacial reactions, results in ion depletion during the cell discharge and battery failure. On the basis of these findings, we propose an electrolyte formulation in which lithium bis(fluorosulfonyl)imide content is maximized without compromising dynamic viscosity and bulk ionic conductivity, aiming for long-cycling battery performance. Following this strategy, we assemble and test Li (20 μm thickness)||LiNi0.8Mn0.1Co0.1O2 (17.1 mg cm−2 of active material) single-layer stack pouch cells in lean electrolyte conditions (that is, 2.1 g Ah−1), which can effectively sustain 483 charge (0.2 C or 28 mA)/discharge (1 C or 140 mA) cycles at 25 °C demonstrating a discharge capacity retention of about 77%.
- 28 May 2025
- Published by Springer Nature in Nature Nanotechnology
- Vol. 20 (8) , 1034-1042
Open AccessApplication-driven design of non-aqueous electrolyte solutions through quantification of interfacial reactions in lithium metal batteries
Unwanted side reactions occurring at electrode|electrolyte interfaces significantly impact the cycling life of lithium metal batteries. However, a comprehensive view that rationalizes these interfacial reactions and assesses them both qualitatively and quantitatively is not yet established. Here, by combining multiple analytical techniques, we systematically investigate the interfacial reactions in lithium metal batteries containing ether-based non-aqueous electrolyte solutions. We quantitatively monitor various nanoscale-driven processes such as the reduction and oxidation pathways of lithium salt and organic solvents, the formation of various solid-electrolyte interphase species, the gas generation within the cell and the cross-talk processes between the electrodes. We demonstrate that the consumption of lithium ions owing to the continuous decomposition of the lithium bis(fluorosulfonyl)imide salt, which dominates the interfacial reactions, results in ion depletion during the cell discharge and battery failure. On the basis of these findings, we propose an electrolyte formulation in which lithium bis(fluorosulfonyl)imide content is maximized without compromising dynamic viscosity and bulk ionic conductivity, aiming for long-cycling battery performance. Following this strategy, we assemble and test Li (20 μm thickness)||LiNi0.8Mn0.1Co0.1O2 (17.1 mg cm−2 of active material) single-layer stack pouch cells in lean electrolyte conditions (that is, 2.1 g Ah−1), which can effectively sustain 483 charge (0.2 C or 28 mA)/discharge (1 C or 140 mA) cycles at 25 °C demonstrating a discharge capacity retention of about 77%.
- Open Access
- 22 February 2024
- Published by Springer Nature in Research Square
Quantifying Interfacial Reactions in Lithium Metal Batteries for a New Paradigm of Long-Cycling Electrolyte Designs
Side reactions at electrolyte-electrode interfaces are the key to failures of lithium metal batteries (LMBs). Recent works fell short of rationalizing the whole picture of interfacial reactions quantitatively. Here we develop and combine multiple techniques to systematically study the interfacial reactions in LMBs with an ether-based electrolyte. Reduction, oxidation pathways of lithium salt and organic solvents, formation of key solid-electrolyte interphase (SEI) species such as LiH and Li2CO3, gas generation and its cross-talk, are quantitatively mapped out. We find that the reduction of lithium bis(fluorosulfonyl)imide (LiFSI) salt is the dominant cause of both electrolyte “dry-out” and lithium inventory loss. FSI anion-derived SEI has significantly promoted lithium metal cycleablity, but it now becomes the limiting factor for the long cycling of LMBs. Based on these findings, we propose a new paradigm for long-cycling electrolyte design, where LiFSI content is maximized without compromising viscosity and ionic conductivity. Following this strategy, we prolong the life of a LMB to nearly 500 cycles under 20 μm Li and 2.1 g/Ah lean electrolyte conditions. Our work demonstrates a bottom-up design methodology where electrolyte formulations are iterated based on a clear understanding of cell failure mechanisms.
- 22 February 2024
- Published by Springer Nature in Research Square
Open AccessQuantifying Interfacial Reactions in Lithium Metal Batteries for a New Paradigm of Long-Cycling Electrolyte Designs
Side reactions at electrolyte-electrode interfaces are the key to failures of lithium metal batteries (LMBs). Recent works fell short of rationalizing the whole picture of interfacial reactions quantitatively. Here we develop and combine multiple techniques to systematically study the interfacial reactions in LMBs with an ether-based electrolyte. Reduction, oxidation pathways of lithium salt and organic solvents, formation of key solid-electrolyte interphase (SEI) species such as LiH and Li2CO3, gas generation and its cross-talk, are quantitatively mapped out. We find that the reduction of lithium bis(fluorosulfonyl)imide (LiFSI) salt is the dominant cause of both electrolyte “dry-out” and lithium inventory loss. FSI anion-derived SEI has significantly promoted lithium metal cycleablity, but it now becomes the limiting factor for the long cycling of LMBs. Based on these findings, we propose a new paradigm for long-cycling electrolyte design, where LiFSI content is maximized without compromising viscosity and ionic conductivity. Following this strategy, we prolong the life of a LMB to nearly 500 cycles under 20 μm Li and 2.1 g/Ah lean electrolyte conditions. Our work demonstrates a bottom-up design methodology where electrolyte formulations are iterated based on a clear understanding of cell failure mechanisms.
- Open Access
- 24 November 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-9
Effect of current density on the solid electrolyte interphase formation at the lithium∣Li6PS5Cl interface
Understanding the chemical composition and morphological evolution of the solid electrolyte interphase (SEI) formed at the interface between the lithium metal electrode and an inorganic solid-state electrolyte is crucial for developing reliable all-solid-state lithium batteries. To better understand the interaction between these cell components, we carry out X-ray photoemission spectroscopy (XPS) measurements during lithium plating on the surface of a Li6PS5Cl solid-state electrolyte pellet using an electron beam. The analyses of the XPS data highlight the role of Li plating current density on the evolution of a uniform and ionically conductive (i.e., Li3P-rich) SEI capable of decreasing the electrode∣solid electrolyte interfacial resistance. The XPS findings are validated via electrochemical impedance spectrsocopy measurements of all-solid-state lithium-based cells.
- 24 November 2022
- Published by Springer Nature in Nature Communications
- Vol. 13 (1) , 1-9
Open AccessEffect of current density on the solid electrolyte interphase formation at the lithium∣Li6PS5Cl interface
Understanding the chemical composition and morphological evolution of the solid electrolyte interphase (SEI) formed at the interface between the lithium metal electrode and an inorganic solid-state electrolyte is crucial for developing reliable all-solid-state lithium batteries. To better understand the interaction between these cell components, we carry out X-ray photoemission spectroscopy (XPS) measurements during lithium plating on the surface of a Li6PS5Cl solid-state electrolyte pellet using an electron beam. The analyses of the XPS data highlight the role of Li plating current density on the evolution of a uniform and ionically conductive (i.e., Li3P-rich) SEI capable of decreasing the electrode∣solid electrolyte interfacial resistance. The XPS findings are validated via electrochemical impedance spectrsocopy measurements of all-solid-state lithium-based cells.
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (6) , 322
Interfacial Characterization, Electrochemical Evolution and Kinetics in Argyrodite Solid Electrolytes with Li Metal Anode for High Energy Density Solid-State Batteries
An all-solid-state battery (SSB), comprising Li/solid electrolyte (SE)/composite cathode, is of great interest due to its potential for improved safety, higher specific energy, energy density and power density, compared with Li-ion cells, enabling widespread use in portable electronics and electric vehicle applications. A variety of material systems are being considered in this regard that largely meet the criteria expected out of the cells they would be part of, namely, oxides, anti-perovskites, garnets, sulfides, and polymers. However, despite the extensive interest, a major limitation impeding progress in large-scale adoption of these SE materials is the instability in interfaces formed with Li metal, that are detrimental to the performance of the electrochemical cell. Among these SE material systems, ceramic solid electrolytes, and in particular, a class of sulfides called argyrodites (Li6PS5X, X = Cl, Br, I), are capable of delivering sufficient ionic conductivity for SSBs to achieve parity in performance with state-of-the-art Li-ion cells based on liquid electrolytes. The barriers lie within the interfaces between the electrolyte and the two electrodes, in the mechanical properties throughout the device and in processing scalability[1]. The chemistry at such interfaces of Li metal and argyrodite SE surface and their dynamic evolution through surface-sensitive techniques like X-ray photoelectron spectroscopy (XPS) will be probed in our study. Owing to the dependence of cell performance on several factors such as electro-chemo-mechanical properties and on kinetics of the process, an integral part of this study would be characterization under ex-situ, in-situ and in-operando conditions. Prior work by Wenzel et al., Schlenker et al. and Wood et al.[2-4] have reported interfacial characteristics in related cell materials, considering some of these aspects, but contrasting chemistries and a lack of consensus on electrode-electrolyte interphase products underscores the complexity of such a system. In my talk, I will compare and contrast the effect of depositing/plating Li metal on the SE surface using various methods while investigating the evolution of interphasial products formed. I will also present a characterization of the evolution of the interface as a function of electrochemical kinetics, in order to better understand the interplay of these effects in determining cell performance. References: [1] Pasta, M., Armstrong, D., Brown, Z.L., Bu, J., Castell, M.R., Chen, P., Cocks, A., Corr, S.A., Cussen, E.J., Darnbrough, E., et al. “2020 roadmap on solid-state batteries”. Journal of Physics: Energy 2 (2020), p 032008 [2] Wenzel, S., Sedlmaier, S.J., Dietrich, C., Zeier, W.G., and Janek, J. (2018), “Interfacial reactivity and interphase growth of argyrodite solid electrolytes at lithium metal electrodes”. Solid State Ionics 318 pp 102–111 [3] Schlenker, R., Stȩpień, D., Koch, P., Hupfer, T., Indris, S., Roling, B., Miß, V., Fuchs, A., Wilhelmi, M., and Ehrenberg, H. (2020). Understanding the Lifetime of Battery Cells Based on Solid-State Li6PS5Cl Electrolyte Paired with Lithium Metal Electrode. ACS Applied Materials and Interfaces 12, 20012–20025 [4] Wood, K.N., Steirer, K.X., Hafner, S.E., Ban, C., Santhanagopalan, S., Lee, S.H., and Teeter, G. (2018). Operando X-ray photoelectron spectroscopy of solid electrolyte interphase formation and evolution in Li2S-P2S5 solid-state electrolytes. Nature Communications 9.
- 30 May 2021
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2021-01 (6) , 322
Interfacial Characterization, Electrochemical Evolution and Kinetics in Argyrodite Solid Electrolytes with Li Metal Anode for High Energy Density Solid-State Batteries
An all-solid-state battery (SSB), comprising Li/solid electrolyte (SE)/composite cathode, is of great interest due to its potential for improved safety, higher specific energy, energy density and power density, compared with Li-ion cells, enabling widespread use in portable electronics and electric vehicle applications. A variety of material systems are being considered in this regard that largely meet the criteria expected out of the cells they would be part of, namely, oxides, anti-perovskites, garnets, sulfides, and polymers. However, despite the extensive interest, a major limitation impeding progress in large-scale adoption of these SE materials is the instability in interfaces formed with Li metal, that are detrimental to the performance of the electrochemical cell. Among these SE material systems, ceramic solid electrolytes, and in particular, a class of sulfides called argyrodites (Li6PS5X, X = Cl, Br, I), are capable of delivering sufficient ionic conductivity for SSBs to achieve parity in performance with state-of-the-art Li-ion cells based on liquid electrolytes. The barriers lie within the interfaces between the electrolyte and the two electrodes, in the mechanical properties throughout the device and in processing scalability[1]. The chemistry at such interfaces of Li metal and argyrodite SE surface and their dynamic evolution through surface-sensitive techniques like X-ray photoelectron spectroscopy (XPS) will be probed in our study. Owing to the dependence of cell performance on several factors such as electro-chemo-mechanical properties and on kinetics of the process, an integral part of this study would be characterization under ex-situ, in-situ and in-operando conditions. Prior work by Wenzel et al., Schlenker et al. and Wood et al.[2-4] have reported interfacial characteristics in related cell materials, considering some of these aspects, but contrasting chemistries and a lack of consensus on electrode-electrolyte interphase products underscores the complexity of such a system. In my talk, I will compare and contrast the effect of depositing/plating Li metal on the SE surface using various methods while investigating the evolution of interphasial products formed. I will also present a characterization of the evolution of the interface as a function of electrochemical kinetics, in order to better understand the interplay of these effects in determining cell performance. References: [1] Pasta, M., Armstrong, D., Brown, Z.L., Bu, J., Castell, M.R., Chen, P., Cocks, A., Corr, S.A., Cussen, E.J., Darnbrough, E., et al. “2020 roadmap on solid-state batteries”. Journal of Physics: Energy 2 (2020), p 032008 [2] Wenzel, S., Sedlmaier, S.J., Dietrich, C., Zeier, W.G., and Janek, J. (2018), “Interfacial reactivity and interphase growth of argyrodite solid electrolytes at lithium metal electrodes”. Solid State Ionics 318 pp 102–111 [3] Schlenker, R., Stȩpień, D., Koch, P., Hupfer, T., Indris, S., Roling, B., Miß, V., Fuchs, A., Wilhelmi, M., and Ehrenberg, H. (2020). Understanding the Lifetime of Battery Cells Based on Solid-State Li6PS5Cl Electrolyte Paired with Lithium Metal Electrode. ACS Applied Materials and Interfaces 12, 20012–20025 [4] Wood, K.N., Steirer, K.X., Hafner, S.E., Ban, C., Santhanagopalan, S., Lee, S.H., and Teeter, G. (2018). Operando X-ray photoelectron spectroscopy of solid electrolyte interphase formation and evolution in Li2S-P2S5 solid-state electrolytes. Nature Communications 9.
- 26 June 2020
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 5 (7) , 2361-2366
Fostering a Sustainable Community in Batteries
- 26 June 2020
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 5 (7) , 2361-2366
Fostering a Sustainable Community in Batteries
- 1 October 2018
- Published by Wiley in ChemSusChem
- Vol. 12 (1) , 208-212
Enabling Reversible (De)Lithiation of Aluminum by using Bis(fluorosulfonyl)imide‐Based Electrolytes
Aluminum, a cost‐effective and abundant metal capable of alloying with Li up to around 1000 mAh g−1, is a very appealing anode material for high energy density lithium‐ion batteries (LIBs). However, despite repeated efforts in the past three decades, reports presenting stable cycling performance are extremely rare. This study concerns recent findings on the highly reversible (de)lithiation of a micro‐sized Al anode (m‐Al) by using bis(fluorosulfonyl)imide (FSI)‐based electrolytes. By using this kind of electrolyte, m‐Al can deliver a specific capacity over 900 mAh g−1 and superior Coulombic efficiency (96.8 %) to traditional carbonate‐ and glyme‐based electrolytes (87.8 % and 88.1 %, respectively), which represents the best performance ever obtained for an Al anode without sophisticated structure design. The significantly improved electrochemical performance, which paves the way to realizing high‐performance Al‐based high energy density LIBs, can be attributed the peculiar solid–electrolyte interphase (SEI) formed by the FSI‐containing electrolyte.
- 1 October 2018
- Published by Wiley in ChemSusChem
- Vol. 12 (1) , 208-212
Enabling Reversible (De)Lithiation of Aluminum by using Bis(fluorosulfonyl)imide‐Based Electrolytes
Aluminum, a cost‐effective and abundant metal capable of alloying with Li up to around 1000 mAh g−1, is a very appealing anode material for high energy density lithium‐ion batteries (LIBs). However, despite repeated efforts in the past three decades, reports presenting stable cycling performance are extremely rare. This study concerns recent findings on the highly reversible (de)lithiation of a micro‐sized Al anode (m‐Al) by using bis(fluorosulfonyl)imide (FSI)‐based electrolytes. By using this kind of electrolyte, m‐Al can deliver a specific capacity over 900 mAh g−1 and superior Coulombic efficiency (96.8 %) to traditional carbonate‐ and glyme‐based electrolytes (87.8 % and 88.1 %, respectively), which represents the best performance ever obtained for an Al anode without sophisticated structure design. The significantly improved electrochemical performance, which paves the way to realizing high‐performance Al‐based high energy density LIBs, can be attributed the peculiar solid–electrolyte interphase (SEI) formed by the FSI‐containing electrolyte.
- 24 September 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (12) , 2601-2608
Conversion/alloying lithium-ion anodes – enhancing the energy density by transition metal doping
The development of alternative anodes is crucial for next generation lithium-ion batteries that can charge rapidly while maintaining high lithium storage capacity. Among the most promising candidates are conversion/alloying metal oxides like SnO2, for which, however, the irreversibility of the conversion reaction provides a great hurdle – not least with respect to the substantial charge loss and, thus, limited energy density. Herein, we report on the improved reversibility of the conversion reaction by incorporating a transition metal dopant like iron, cobalt, or manganese. While all these dopants provide substantially enhanced capacities due to their beneficial effect on the alloying and conversion reaction, a detailed comparison concerning the achievable capacity at lower voltages, i.e., less than 2.0 V, reveals that the careful selection of the dopant plays a decisive role for the achievable energy density on the full-cell level. In fact, the highest energy density is obtained when doping SnO2 with manganese rather than cobalt or iron because of its relatively lower redox potential and when setting the anodic cut-off to 1.5 V – despite the lower capacity. These results may serve as a general guideline when designing and evaluating alternatives for graphite – in particular, those including a conversion step.
- 24 September 2018
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 2 (12) , 2601-2608
Conversion/alloying lithium-ion anodes – enhancing the energy density by transition metal doping
The development of alternative anodes is crucial for next generation lithium-ion batteries that can charge rapidly while maintaining high lithium storage capacity. Among the most promising candidates are conversion/alloying metal oxides like SnO2, for which, however, the irreversibility of the conversion reaction provides a great hurdle – not least with respect to the substantial charge loss and, thus, limited energy density. Herein, we report on the improved reversibility of the conversion reaction by incorporating a transition metal dopant like iron, cobalt, or manganese. While all these dopants provide substantially enhanced capacities due to their beneficial effect on the alloying and conversion reaction, a detailed comparison concerning the achievable capacity at lower voltages, i.e., less than 2.0 V, reveals that the careful selection of the dopant plays a decisive role for the achievable energy density on the full-cell level. In fact, the highest energy density is obtained when doping SnO2 with manganese rather than cobalt or iron because of its relatively lower redox potential and when setting the anodic cut-off to 1.5 V – despite the lower capacity. These results may serve as a general guideline when designing and evaluating alternatives for graphite – in particular, those including a conversion step.
- 18 July 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (26)
High Capacity All‐Solid‐State Lithium Batteries Enabled by Pyrite‐Sulfur Composites
As the theoretical limit of intercalation material‐based lithium‐ion batteries is approached, alternative chemistries based on conversion reactions are presently considered. The conversion of sulfur is particularly appealing as it is associated with a theoretical gravimetric energy density up to 2510 Wh kg−1. In this paper, three different carbon‐iron disulfide‐sulfur (C‐FeS2‐S) composites are proposed as alternative positive electrode materials for all‐solid‐state lithium‐sulfur batteries. These are synthesized through a facile, low‐cost, single‐step ball‐milling procedure. It is found that the crystalline structure (evaluated by X‐ray diffraction) and the morphology of the composites (evaluated by scanning electron microscopy) are greatly influenced by the FeS2:S ratio. Li/LiI‐Li3PS4/C‐FeS2‐S solid‐state cells are tested under galvanostatic conditions, while differential capacity plots are used to discuss the peculiar electrochemical features of these novel materials. These cells deliver capacities as high as 1200 mAh g(FeS2+S)−1 at the intermediate loading of 1 mg cm−2 (1.2 mAh cm−2), and up to 3.55 mAh cm−2 for active material loadings as high as 5 mg cm−2 at 20 °C. Such an excellent performance, rarely reported for (sulfur/metal sulfide)‐based, all solid‐state cells, makes these composites highly promising for real application where high positive electrode loadings are required.
- 18 July 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (26)
High Capacity All‐Solid‐State Lithium Batteries Enabled by Pyrite‐Sulfur Composites
As the theoretical limit of intercalation material‐based lithium‐ion batteries is approached, alternative chemistries based on conversion reactions are presently considered. The conversion of sulfur is particularly appealing as it is associated with a theoretical gravimetric energy density up to 2510 Wh kg−1. In this paper, three different carbon‐iron disulfide‐sulfur (C‐FeS2‐S) composites are proposed as alternative positive electrode materials for all‐solid‐state lithium‐sulfur batteries. These are synthesized through a facile, low‐cost, single‐step ball‐milling procedure. It is found that the crystalline structure (evaluated by X‐ray diffraction) and the morphology of the composites (evaluated by scanning electron microscopy) are greatly influenced by the FeS2:S ratio. Li/LiI‐Li3PS4/C‐FeS2‐S solid‐state cells are tested under galvanostatic conditions, while differential capacity plots are used to discuss the peculiar electrochemical features of these novel materials. These cells deliver capacities as high as 1200 mAh g(FeS2+S)−1 at the intermediate loading of 1 mg cm−2 (1.2 mAh cm−2), and up to 3.55 mAh cm−2 for active material loadings as high as 5 mg cm−2 at 20 °C. Such an excellent performance, rarely reported for (sulfur/metal sulfide)‐based, all solid‐state cells, makes these composites highly promising for real application where high positive electrode loadings are required.
- 1 July 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 277, 100-109
Influence of the doping ratio and the carbon coating content on the electrochemical performance of Co-doped SnO2 for lithium-ion anodes
- 1 July 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 277, 100-109
Influence of the doping ratio and the carbon coating content on the electrochemical performance of Co-doped SnO2 for lithium-ion anodes