Virginijus Vileiniškis

The safe storage of spent fuel assemblies in the spent fuel pools is very important. These facilities are not covered by leaktight containment; thus, the consequences of overheating and melting of fuel in the spent fuel pools can be very severe. On the other hand, due to low decay heat of fuel assemblies, the processes in pools are slow in comparison with processes in reactor core during LOCA accident. Thus, the accident management measures play a very important role in case of some accidents in spent fuel pools. This paper presents the analysis of possible consequences of fuel overheating due to leakage of water from spent fuel pool. Also, the accident mitigation measure, the late injection of water was evaluated. The analysis was performed for the Ignalina NPP Unit 2 spent fuel pool, using system thermal hydraulic code for severe accident analysis ATHLET-CD. The phenomena, taking place during such accident, are discussed. Also, benchmarking of results of the same accident calculation using ASTEC and RELAP/SCDAPSIM codes is presented here.

The PHEBUS-FP program is an outstanding example of an international cooperative research program that is yielding valuable data for validating severe accident analysis computer codes. The main objective of the PHEBUS FPT1 experiment was to study the processes in the overheated reactor core, release of fission products and their subsequent transport and deposition under conditions representative of a severe accident of a Pressurised Water Reactor. The FPT1 test could be divided in the bundle degradation, aerosol, washing and chemistry phases. The objective of this article is the best estimate analysis of the bundle degradation phase. GRS (Germany) best estimate method with the statistic tool SUSA used for uncertainty and sensitivity analysis of calculation results and RELAP/SCDAPSIM code, designed to predict the behaviour of reactor systems during severe accident conditions, was used for the simulation of this test. The RELAP/SCDAPSIM calculation results were compared with the experimental measurements and calculations results, received by employing ICARE module of ASTEC V2 code. The performed analysis demonstrated, that the best estimate method, employing RELAP/SCDAPSIM and SUSA codes, is capable to model main severe accidents phenomena in the fuel bundle during the overheating and melting of reactor core.

The main objective of the PHEBUS FPT1 experiment was to study the release of fission products and their subsequent transport and deposition in the primary circuit and the containment under the conditions representative of a severe accident of a Pressurised Water Reactor. The FPT1 test was divided into the bundle degradation, aerosol, washing and chemistry phases. The objective of this paper is related to the best estimate analysis of the bundle degradation phase using ASTEC code ICARE module. GRS (Germany) best estimate method was used for the simulation of FPT1 test by employing SUSA 3.5 package. The performed best estimate analysis showed that ICARE module is capable to model the main severe accidents phenomena in the fuel bundle, heating and melting, taking into account the used physical and code parameters uncertainties.