Kateryna Nesvit
Research Subjects
Kateryna Nesvit has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Igor Linetskiy
General University Hospital in Prague
3 shared publications - Vladislav Demenko
National Aerospace University "Kharkiv Aviation Institute
3 shared publications A. Shevchenko
Department of Aircraft Strength, National Aerospace University, Kharkiv, Ukraine
2 shared publicationsAndrii Shevchenko
Department of Aircraft Strength, National Aerospace University, Kharkov, Ukraine
1 shared publication- Hana Hubálková
Department of Stomatology of the First Faculty of Medicine, Charles University in Prague, Czech Republic
1 shared publication Iryna Tretjak
Department of Material Science and Composite Materials, National Aerospace University, Kharkov, Ukraine
1 shared publication
Latest Publications
- 19 July 2015
- Published by Science Publishing Corporation in International Journal of Advanced Mathematical Sciences
- Vol. 3 (2) , 161
Computational modeling of hypersingular integral equations for 2D pre-cantor scattering structure
This paper presents the investigative study to derive a computational model based on hypersingular integral equations for the pre-Cantor plane-parallel diffraction structure. Such structure consists of finite numbers of the thin impedance strips located in the XY plane. A plane transverse magnetic wave is incident from infinity on considered diffraction structure at an angle and need to find the total field resulting from the scattering. The model which is considered in this work is an approximation of real fractal antennas in two-dimensional case. Pre-fractal properties of grating allow producing the newest antennas for modern mobile devices due to their compact size and broadband properties. The purpose of this work is to develop computer model their structure using parametric representation of hypersingular integral operator, Nystrom method with specific quadrature formulas. The numerical results have been obtained and investigated for pre-Cantor structures for calculating physics characteristics. These results have been compared and analyzed in different mathematical models and softwares.
- 19 July 2015
- Published by Science Publishing Corporation in International Journal of Advanced Mathematical Sciences
- Vol. 3 (2) , 161
Computational modeling of hypersingular integral equations for 2D pre-cantor scattering structure
This paper presents the investigative study to derive a computational model based on hypersingular integral equations for the pre-Cantor plane-parallel diffraction structure. Such structure consists of finite numbers of the thin impedance strips located in the XY plane. A plane transverse magnetic wave is incident from infinity on considered diffraction structure at an angle and need to find the total field resulting from the scattering. The model which is considered in this work is an approximation of real fractal antennas in two-dimensional case. Pre-fractal properties of grating allow producing the newest antennas for modern mobile devices due to their compact size and broadband properties. The purpose of this work is to develop computer model their structure using parametric representation of hypersingular integral operator, Nystrom method with specific quadrature formulas. The numerical results have been obtained and investigated for pre-Cantor structures for calculating physics characteristics. These results have been compared and analyzed in different mathematical models and softwares.
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (21643342) , 2773-2777
Scattering and propagation of the TE/TM waves on pre-fractal impedance grating in numerical results
A transverse electric (TE) and magnetic (TM) wave diffraction problems on pre-fractal impedance strips are considered in this paper. This type of problems leads to boundary integral equations (IEs) with logarithmic singularities. A discrete mathematical model of the boundary IEs has been developed with the help of special quadrature formulas with the nodes in the nulls of Chebyshev polynomials. This research is completely aimed at performing numerical experiments with the help of an efficient discrete singularities method (DSM).
- 1 April 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2 (21643342) , 2773-2777
Scattering and propagation of the TE/TM waves on pre-fractal impedance grating in numerical results
A transverse electric (TE) and magnetic (TM) wave diffraction problems on pre-fractal impedance strips are considered in this paper. This type of problems leads to boundary integral equations (IEs) with logarithmic singularities. A discrete mathematical model of the boundary IEs has been developed with the help of special quadrature formulas with the nodes in the nulls of Chebyshev polynomials. This research is completely aimed at performing numerical experiments with the help of an efficient discrete singularities method (DSM).
- 1 January 2014
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1629 (1) , 102-109
Mathematical and computational modeling of the diffraction problems by discrete singularities method
The main objective of this study is reduced the boundary-value problems of scattering and diffraction waves on plane-parallel structures to the singular or hypersingular integral equations. For these cases we use a method of the parametric representations of the integral and pseudo-differential operators. Numerical results of the model scattering problems on periodic and boundary gratings and also on the gratings above a flat screen reflector are presented in this paper.
- 1 January 2014
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1629 (1) , 102-109
Mathematical and computational modeling of the diffraction problems by discrete singularities method
The main objective of this study is reduced the boundary-value problems of scattering and diffraction waves on plane-parallel structures to the singular or hypersingular integral equations. For these cases we use a method of the parametric representations of the integral and pseudo-differential operators. Numerical results of the model scattering problems on periodic and boundary gratings and also on the gratings above a flat screen reflector are presented in this paper.
- 1 January 2013
- Published by AIP Publishing in AIP Conference Proceedings
- p. 219-223
Discrete mathematical model of wave diffraction on pre-fractal impedance strips. TM mode case
- 1 January 2013
- Published by AIP Publishing in AIP Conference Proceedings
- p. 219-223
Discrete mathematical model of wave diffraction on pre-fractal impedance strips. TM mode case
- 15 May 2012
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 17 (4) , 443-449
Importance of diameter-to-length ratio in selecting dental implants: a methodological finite element study
Implant dimensions greatly influence load transfer characteristics and the lifetime of a dental system. Excessive stresses at peri-implant area may result in bone failure. Finding the critical point at the implant–bone interface and evaluating the influence of implant diameter-to-length ratio on adjacent bone stresses makes it possible to select implant dimensions. For this, different cylindrical implants were numerically analysed using geometrical models generated from computed tomography images of mandible with osseointegrated implants. All materials were assumed to be linearly elastic and isotropic. Masticatory load was applied in its natural direction, oblique to occlusal plane. Maximum von Mises stresses were located around the implant neck at the critical point of its intersection with the plane of loading and were functions of implant diameter-to-length ratio. It was demonstrated that there exists a certain spectrum of diameter-to-length ratios, which will keep maximum bone stresses at a preset level chosen in accordance with patient's bone strength.
- 15 May 2012
- Published by Taylor & Francis in Computer Methods in Biomechanics and Biomedical Engineering
- Vol. 17 (4) , 443-449
Importance of diameter-to-length ratio in selecting dental implants: a methodological finite element study
Implant dimensions greatly influence load transfer characteristics and the lifetime of a dental system. Excessive stresses at peri-implant area may result in bone failure. Finding the critical point at the implant–bone interface and evaluating the influence of implant diameter-to-length ratio on adjacent bone stresses makes it possible to select implant dimensions. For this, different cylindrical implants were numerically analysed using geometrical models generated from computed tomography images of mandible with osseointegrated implants. All materials were assumed to be linearly elastic and isotropic. Masticatory load was applied in its natural direction, oblique to occlusal plane. Maximum von Mises stresses were located around the implant neck at the critical point of its intersection with the plane of loading and were functions of implant diameter-to-length ratio. It was demonstrated that there exists a certain spectrum of diameter-to-length ratios, which will keep maximum bone stresses at a preset level chosen in accordance with patient's bone strength.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 171, 183-187
Hypersingular integral equation of wave diffraction problem on pre-Cantor grating and its discrete mathematical models
Mathematical model of wave diffraction problem H polarized of a plane electromagnetic wave by a pre-Cantor grating, consisting of a finite number of perfectly conducting strips, has been constructed. In the cross section grating plane perpendicular to the edges of the strips, there is a system of intervals obtained on the N-th step on the principle of constructing a Cantor set on the interval [-l,l]. Extensive numerical experiments based on a discrete mathematical model have been carried out. The approximate values of both solutions of integral equations and the vectors of the electromagnetic field have been obtained. The patterns of the field in the far and near zone have been calculated.
- 1 May 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 171, 183-187
Hypersingular integral equation of wave diffraction problem on pre-Cantor grating and its discrete mathematical models
Mathematical model of wave diffraction problem H polarized of a plane electromagnetic wave by a pre-Cantor grating, consisting of a finite number of perfectly conducting strips, has been constructed. In the cross section grating plane perpendicular to the edges of the strips, there is a system of intervals obtained on the N-th step on the principle of constructing a Cantor set on the interval [-l,l]. Extensive numerical experiments based on a discrete mathematical model have been carried out. The approximate values of both solutions of integral equations and the vectors of the electromagnetic field have been obtained. The patterns of the field in the far and near zone have been calculated.
- 1 August 2011
- Published by SAGE Publications in Journal of Dental Research
- Vol. 90 (10) , 1211-1215
Ultimate Masticatory Force as a Criterion in Implant Selection
Osseointegrated implants often fail because of excessive masticatory forces that cause extremely large stresses in bone tissue. We hypothesized that a proper dental implant could be selected by comparing the ultimate masticatory forces of a wide range of commercially available implants. We determined ultimate oblique masticatory forces for different cylindrical implants, taking into consideration the biomechanical correlation between implant dimensions and stresses in supporting bone. For this purpose, we used the finite element (FE) method and studied von Mises stresses in implant-bone interface areas to evaluate the influence of implant dimensions on stress concentration and on the value of an implant’s ultimate masticatory load. Geometric models of a mandibular segment were generated from computed tomography (CT) images and were analyzed with osseointegrated cylindrical implants. Masticatory forces were applied in their natural direction. All materials were assumed to be linearly elastic and isotropic. Critical point in the peri-implant area of bone was determined. The ultimate value of the masticatory load, which generates ultimate stresses at the critical point, was calculated for each implant. These findings provide correct selection of implant dimensions in clinical cases, because corresponding ultimate values of masticatory force were used as a criterion for assessment of their load-carrying capacity and applicability.
- 1 August 2011
- Published by SAGE Publications in Journal of Dental Research
- Vol. 90 (10) , 1211-1215
Ultimate Masticatory Force as a Criterion in Implant Selection
Osseointegrated implants often fail because of excessive masticatory forces that cause extremely large stresses in bone tissue. We hypothesized that a proper dental implant could be selected by comparing the ultimate masticatory forces of a wide range of commercially available implants. We determined ultimate oblique masticatory forces for different cylindrical implants, taking into consideration the biomechanical correlation between implant dimensions and stresses in supporting bone. For this purpose, we used the finite element (FE) method and studied von Mises stresses in implant-bone interface areas to evaluate the influence of implant dimensions on stress concentration and on the value of an implant’s ultimate masticatory load. Geometric models of a mandibular segment were generated from computed tomography (CT) images and were analyzed with osseointegrated cylindrical implants. Masticatory forces were applied in their natural direction. All materials were assumed to be linearly elastic and isotropic. Critical point in the peri-implant area of bone was determined. The ultimate value of the masticatory load, which generates ultimate stresses at the critical point, was calculated for each implant. These findings provide correct selection of implant dimensions in clinical cases, because corresponding ultimate values of masticatory force were used as a criterion for assessment of their load-carrying capacity and applicability.
- 1 January 2011
- Published by SAGE Publications in Strength, Fracture and Complexity
- Vol. 7 (3) , 253-272
Evaluation of stresses in hard dental tissues in tooth wear using finite element analysis: A methodological study
Mechanical strength of worn hard dental tissues of a tooth crown under its local loading by a hard food particle was evaluated. A mathematical model of a tooth crown was developed as a two-layer elastic solid, which consisted of worn or demineralized
- 1 January 2011
- Published by SAGE Publications in Strength, Fracture and Complexity
- Vol. 7 (3) , 253-272
Evaluation of stresses in hard dental tissues in tooth wear using finite element analysis: A methodological study
Mechanical strength of worn hard dental tissues of a tooth crown under its local loading by a hard food particle was evaluated. A mathematical model of a tooth crown was developed as a two-layer elastic solid, which consisted of worn or demineralized