Sivasathivel Kandasamy
Research Subjects
Research Interests
Sivasathivel Kandasamy has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Frederic Baret
INRA
5 shared publications - Aleixandre Verger
Desertification Research Centre (CIDECSIC), Valencia, Spain
4 shared publications - Marie Weiss
EMMAH, UMR 1114, INRAE, Université d’Avignon, France
4 shared publications Audrey Minghelli-Roman
LE2I, UMR-CNRS 5158, University of Burgundy Aile Sciences de l'Ingénieur, BP 47870, 21078 DIJON, France
2 shared publicationsF. Baret
INRA-EMMAH, UMR1114, Site Agroparc, 84914 Avignon, France
2 shared publicationsFrancois Tavin
LE2I, UMR-CNRS 5158, University of Burgundy Aile Sciences de l'Ingénieur, BP 47870, 21078 DIJON, France
2 shared publications
Latest Publications
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Suivi de l'indice foliaire (LAI) à l'échelle globale : amélioration de la définition, de la continuité et de la cohérence des estimations de LAI à partir d'observations satellitaires kilometriques
Le suivi des variables biophysiques à l’échelle globale sur de longues périodes de temps est essentiellepour répondre aux nouveaux enjeux que constituent le changement climatique et la sécurité alimentaire. L’indice foliaire (LAI) est une variable de structure définissant la surface d’interception du rayonnement incident et d’échanges gazeux avec l’atmosphère. Le LAI est donc une variable importante des modèles d’écosystèmes et a d’ailleurs été reconnue comme variable climatique essentielle (ECV). Cette thèse a pour objectif de fournir des estimations globales et continues de LAI à partir d’observations satellitaires en temps quasi-réel en réponse aux besoins des utilisateurs pour fournir des diagnostiques et pronostiques de l’état et du fonctionnement de la végétation. Quelques produits LAI sont déjà disponibles mais montrent des désaccords et des limitations en termes de cohérence et de continuité. Cette thèse a pour objectif de lever ces limitations. Dans un premier temps, on essaiera de mieux définir la nature des estimations de LAI à partir d’observations satellitaires. Puis, différentes méthodes de lissage te bouchage des séries temporelles ont été analysées pour réduire le bruit et les discontinuités principalement liées à la couverture nuageuse. Finalement quelques méthodes d’estimation temps quasi réel ont été évaluées en considérant le niveau de bruit et les données manquantes.Les résultats obtenus dans la première partie de cette thèse montrent que la LAI effectif et bien mieux estimé que la valeur réelle de LAI du fait de l’agrégation des feuilles observée au niveau du couvert. L’utilisation d’observations multidirectionnelles n’améliore que marginalement les performances d’estimation. L’étude montre également que les performances d’estimation optimales sont obtenues quand les solutions sont recherchées à l’intérieur d’une enveloppe définie par l’incertitude associée aux mesures radiométriques. Dans la deuxième partie consacrée à l’amélioration de la continuité et la cohérence des séries temporelles, les méthodes basées sur une fenêtre temporelle locale mais de largeur dépendant du nombre d’observations présentes, et utilisant la climatologie comme information a priori s’avèrent les plus intéressantes autorisant également l’estimation en temps quasi réel.
- 31 March 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Suivi de l'indice foliaire (LAI) à l'échelle globale : amélioration de la définition, de la continuité et de la cohérence des estimations de LAI à partir d'observations satellitaires kilometriques
Le suivi des variables biophysiques à l’échelle globale sur de longues périodes de temps est essentiellepour répondre aux nouveaux enjeux que constituent le changement climatique et la sécurité alimentaire. L’indice foliaire (LAI) est une variable de structure définissant la surface d’interception du rayonnement incident et d’échanges gazeux avec l’atmosphère. Le LAI est donc une variable importante des modèles d’écosystèmes et a d’ailleurs été reconnue comme variable climatique essentielle (ECV). Cette thèse a pour objectif de fournir des estimations globales et continues de LAI à partir d’observations satellitaires en temps quasi-réel en réponse aux besoins des utilisateurs pour fournir des diagnostiques et pronostiques de l’état et du fonctionnement de la végétation. Quelques produits LAI sont déjà disponibles mais montrent des désaccords et des limitations en termes de cohérence et de continuité. Cette thèse a pour objectif de lever ces limitations. Dans un premier temps, on essaiera de mieux définir la nature des estimations de LAI à partir d’observations satellitaires. Puis, différentes méthodes de lissage te bouchage des séries temporelles ont été analysées pour réduire le bruit et les discontinuités principalement liées à la couverture nuageuse. Finalement quelques méthodes d’estimation temps quasi réel ont été évaluées en considérant le niveau de bruit et les données manquantes.Les résultats obtenus dans la première partie de cette thèse montrent que la LAI effectif et bien mieux estimé que la valeur réelle de LAI du fait de l’agrégation des feuilles observée au niveau du couvert. L’utilisation d’observations multidirectionnelles n’améliore que marginalement les performances d’estimation. L’étude montre également que les performances d’estimation optimales sont obtenues quand les solutions sont recherchées à l’intérieur d’une enveloppe définie par l’incertitude associée aux mesures radiométriques. Dans la deuxième partie consacrée à l’amélioration de la continuité et la cohérence des séries temporelles, les méthodes basées sur une fenêtre temporelle locale mais de largeur dépendant du nombre d’observations présentes, et utilisant la climatologie comme information a priori s’avèrent les plus intéressantes autorisant également l’estimation en temps quasi réel.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3522-3525
Assessment of satellite based vegetation land surface phenology algorithms with application to a 20 year NOAA AVHRR record over Canada and Northern USA
Land Surface phenology (LSP) is related to vegetation dynamics and is an indicator of tracking surface climate change. One of the challenges in the study of LSP is the validation of satellite based LSP products. Here, we have proposed a novel methodology of the validating LSP products by applying observed temporal gap and measurement noise to representative daily NDVI reference time series from satellite imagery. Three well-known LSP algorithms(iterative Savitzky-Golay filtering-SGF [1], Asymmetric Gaussian Fitting - AGF [2] and Logistic fitting [3, 4]) are applied to 20 years of NOAA AVHRR measurements over biomes in Canada and Northern USA. For a given AVHRR cloud threshold, both AGF and SGF are more sensitive to the amount of gaps than to the noise in the data.
- 1 July 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 3522-3525
Assessment of satellite based vegetation land surface phenology algorithms with application to a 20 year NOAA AVHRR record over Canada and Northern USA
Land Surface phenology (LSP) is related to vegetation dynamics and is an indicator of tracking surface climate change. One of the challenges in the study of LSP is the validation of satellite based LSP products. Here, we have proposed a novel methodology of the validating LSP products by applying observed temporal gap and measurement noise to representative daily NDVI reference time series from satellite imagery. Three well-known LSP algorithms(iterative Savitzky-Golay filtering-SGF [1], Asymmetric Gaussian Fitting - AGF [2] and Logistic fitting [3, 4]) are applied to 20 years of NOAA AVHRR measurements over biomes in Canada and Northern USA. For a given AVHRR cloud threshold, both AGF and SGF are more sensitive to the amount of gaps than to the noise in the data.
- Open Access
- 20 June 2013
- Published by Copernicus GmbH in Biogeosciences
- Vol. 10 (6) , 4055-4071
A comparison of methods for smoothing and gap filling time series of remote sensing observations – application to MODIS LAI products
Moderate resolution satellite sensors including MODIS (Moderate Resolution Imaging Spectroradiometer) already provide more than 10 yr of observations well suited to describe and understand the dynamics of earth's surface. However, these time series are associated with significant uncertainties and incomplete because of cloud cover. This study compares eight methods designed to improve the continuity by filling gaps and consistency by smoothing the time course. It includes methods exploiting the time series as a whole (iterative caterpillar singular spectrum analysis (ICSSA), empirical mode decomposition (EMD), low pass filtering (LPF) and Whittaker smoother (Whit)) as well as methods working on limited temporal windows of a few weeks to few months (adaptive Savitzky–Golay filter (SGF), temporal smoothing and gap filling (TSGF), and asymmetric Gaussian function (AGF)), in addition to the simple climatological LAI yearly profile (Clim). Methods were applied to the MODIS leaf area index product for the period 2000–2008 and over 25 sites showed a large range of seasonal patterns. Performances were discussed with emphasis on the balance achieved by each method between accuracy and roughness depending on the fraction of missing observations and the length of the gaps. Results demonstrate that the EMD, LPF and AGF methods were failing because of a significant fraction of gaps (more than 20%), while ICSSA, Whit and SGF were always providing estimates for dates with missing data. TSGF (Clim) was able to fill more than 50% of the gaps for sites with more than 60% (80%) fraction of gaps. However, investigation of the accuracy of the reconstructed values shows that it degrades rapidly for sites with more than 20% missing data, particularly for ICSSA, Whit and SGF. In these conditions, TSGF provides the best performances that are significantly better than the simple Clim for gaps shorter than about 100 days. The roughness of the reconstructed temporal profiles shows large differences between the various methods, with a decrease of the roughness with the fraction of missing data, except for ICSSA. TSGF provides the smoothest temporal profiles for sites with a % gap > 30%. Conversely, ICSSA, LPF, Whit, AGF and Clim provide smoother profiles than TSGF for sites with a % gap < 30%. Impact of the accuracy and smoothness of the reconstructed time series were evaluated on the timing of phenological stages. The dates of start, maximum and end of the season are estimated with an accuracy of about 10 days for the sites with a % gap < 10% and increases rapidly with the % gap. TSGF provides more accurate estimates of phenological timing up to a % gap < 60%.
- 20 June 2013
- Published by Copernicus GmbH in Biogeosciences
- Vol. 10 (6) , 4055-4071
Open AccessA comparison of methods for smoothing and gap filling time series of remote sensing observations – application to MODIS LAI products
Moderate resolution satellite sensors including MODIS (Moderate Resolution Imaging Spectroradiometer) already provide more than 10 yr of observations well suited to describe and understand the dynamics of earth's surface. However, these time series are associated with significant uncertainties and incomplete because of cloud cover. This study compares eight methods designed to improve the continuity by filling gaps and consistency by smoothing the time course. It includes methods exploiting the time series as a whole (iterative caterpillar singular spectrum analysis (ICSSA), empirical mode decomposition (EMD), low pass filtering (LPF) and Whittaker smoother (Whit)) as well as methods working on limited temporal windows of a few weeks to few months (adaptive Savitzky–Golay filter (SGF), temporal smoothing and gap filling (TSGF), and asymmetric Gaussian function (AGF)), in addition to the simple climatological LAI yearly profile (Clim). Methods were applied to the MODIS leaf area index product for the period 2000–2008 and over 25 sites showed a large range of seasonal patterns. Performances were discussed with emphasis on the balance achieved by each method between accuracy and roughness depending on the fraction of missing observations and the length of the gaps. Results demonstrate that the EMD, LPF and AGF methods were failing because of a significant fraction of gaps (more than 20%), while ICSSA, Whit and SGF were always providing estimates for dates with missing data. TSGF (Clim) was able to fill more than 50% of the gaps for sites with more than 60% (80%) fraction of gaps. However, investigation of the accuracy of the reconstructed values shows that it degrades rapidly for sites with more than 20% missing data, particularly for ICSSA, Whit and SGF. In these conditions, TSGF provides the best performances that are significantly better than the simple Clim for gaps shorter than about 100 days. The roughness of the reconstructed temporal profiles shows large differences between the various methods, with a decrease of the roughness with the fraction of missing data, except for ICSSA. TSGF provides the smoothest temporal profiles for sites with a % gap > 30%. Conversely, ICSSA, LPF, Whit, AGF and Clim provide smoother profiles than TSGF for sites with a % gap < 30%. Impact of the accuracy and smoothness of the reconstructed time series were evaluated on the timing of phenological stages. The dates of start, maximum and end of the season are estimated with an accuracy of about 10 days for the sites with a % gap < 10% and increases rapidly with the % gap. TSGF provides more accurate estimates of phenological timing up to a % gap < 60%.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6475-6478
Near-real time estimates of leaf area index from AVHRR time series data
The performance of two time series processing methods, the Whittaker method (WM) and Gaussian Process Model (GPM), were assessed for real time estimation of leaf area index (LAI) derived from AVHRR daily data at 0.05° spatial resolution. The two methods were selected from an ensemble of methods, based on their ability to accept missing observations and to make short-term predictions. The performances of the two selected methods were evaluated as a function of the fraction of valid data and the length of gaps over a number of cases representing a range of temporal dynamics as well as distribution of missing observations. Results show that, when the length of gaps is smaller than 20 days and the fraction of valid data over the whole time series is lower than 50%, similar performances are achieved with the two methods with RMSE values lower than 0.25. For fraction of gaps higher than 50% or periods of gaps longer than 20 days GPM is more robust than the WM at the expenses of being more time consuming.
- 1 July 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 6475-6478
Near-real time estimates of leaf area index from AVHRR time series data
The performance of two time series processing methods, the Whittaker method (WM) and Gaussian Process Model (GPM), were assessed for real time estimation of leaf area index (LAI) derived from AVHRR daily data at 0.05° spatial resolution. The two methods were selected from an ensemble of methods, based on their ability to accept missing observations and to make short-term predictions. The performances of the two selected methods were evaluated as a function of the fraction of valid data and the length of gaps over a number of cases representing a range of temporal dynamics as well as distribution of missing observations. Results show that, when the length of gaps is smaller than 20 days and the fraction of valid data over the whole time series is lower than 50%, similar performances are achieved with the two methods with RMSE values lower than 0.25. For fraction of gaps higher than 50% or periods of gaps longer than 20 days GPM is more robust than the WM at the expenses of being more time consuming.
- 1 June 2012
- Published by Polish Academy of Sciences Chancellery in International Journal of Electronics and Telecommunications
- Vol. 58 (2) , 141-146
Improving the Consistency and Continuity of MODIS 8 Day Leaf Area Index Products
Improving the Consistency and Continuity of MODIS 8 Day Leaf Area Index Products: Time Series Analysis of Leaf Area Index (LAI) is vital to the understanding of global vegetation dynamics. The LAI time series derived from satellite observations are usually not complete and noisy due to cloud contamination and uncertainties in the retrieval techniques. In this paper, the continuity and consistency of the MODIS 8 day LAI products are improved using a method based on Caterpillar Singular Spectrum Analysis. The proposed method is compared with other standard methods: Savitzky-Golay filter, Empirical Mode Decomposition, Low Pass filtering and Asymmetric Gaussian fitting. The experiment demonstrates the smoothing and gapfilling ability of the developed method, which is more robust across the biomes both in terms of root mean square error metrics and bias metrics as compared to the standard methods.
- 1 June 2012
- Published by Polish Academy of Sciences Chancellery in International Journal of Electronics and Telecommunications
- Vol. 58 (2) , 141-146
Improving the Consistency and Continuity of MODIS 8 Day Leaf Area Index Products
Improving the Consistency and Continuity of MODIS 8 Day Leaf Area Index Products: Time Series Analysis of Leaf Area Index (LAI) is vital to the understanding of global vegetation dynamics. The LAI time series derived from satellite observations are usually not complete and noisy due to cloud contamination and uncertainties in the retrieval techniques. In this paper, the continuity and consistency of the MODIS 8 day LAI products are improved using a method based on Caterpillar Singular Spectrum Analysis. The proposed method is compared with other standard methods: Savitzky-Golay filter, Empirical Mode Decomposition, Low Pass filtering and Asymmetric Gaussian fitting. The experiment demonstrates the smoothing and gapfilling ability of the developed method, which is more robust across the biomes both in terms of root mean square error metrics and bias metrics as compared to the standard methods.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 113-116
Quantification of LAI interannual anomalies by adjusting climatological patterns
Scaling variations and shifts in the timing of seasonal phenology are central features of global change research. In this study, we propose a novel climatology fitting approach to quantify inter-annual anomalies in LAI seasonality. A consistent archive of daily LAI estimates was first derived from historical AVHRR satellite data for the 1981-2000 period over a globally representative sample of sites. The climatology values were then computed by averaging multi-year LAI profiles, gap filling and smoothing to eliminate possible high temporal frequency residual artifacts. The inter-annual variations in LAI were finally quantified by scaling and shifting the seasonal climatological patterns to the actual observations. In addition to capturing LAI dynamics and quantifying anomalies, this climatology fitting approach allows improving the continuity and consistency of time series by filling gaps and smoothing LAI dynamics.
- 1 July 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 113-116
Quantification of LAI interannual anomalies by adjusting climatological patterns
Scaling variations and shifts in the timing of seasonal phenology are central features of global change research. In this study, we propose a novel climatology fitting approach to quantify inter-annual anomalies in LAI seasonality. A consistent archive of daily LAI estimates was first derived from historical AVHRR satellite data for the 1981-2000 period over a globally representative sample of sites. The climatology values were then computed by averaging multi-year LAI profiles, gap filling and smoothing to eliminate possible high temporal frequency residual artifacts. The inter-annual variations in LAI were finally quantified by scaling and shifting the seasonal climatological patterns to the actual observations. In addition to capturing LAI dynamics and quantifying anomalies, this climatology fitting approach allows improving the continuity and consistency of time series by filling gaps and smoothing LAI dynamics.
- 1 July 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 789-792
The effective nature of LAI as measured from remote sensing observations
This study investigates the retrieval performances of LAI using radiative transfer model inversion. The SAIL and GEOSAIL models were used here to evaluate the impact of the complexity of canopy architecture on LAI estimation. The inversion of SAIL or GEOSAIL models was carried out using a look up table technique. Test data sets were generated with SAIL and GEOSAIL to evaluate the performances. Results indicate first that the way the solution is selected within the LUT appeared to be very important. Comparing the inversion using SAIL or GEOSAIL over test cases simulated with SAIL or GEOSAIL show that consistency between the RTM used in the inversion process and the test cases improves the estimation. However, estimation of LAI for complex canopy architecture with non random distribution of leaves (clumping) is difficult when no prior information is available on the targets. However, it is demonstrated that the effective LAI, i.e. the LAI retrieved from the gap fraction measurements assuming. random leaf distribution, is estimated with much better accuracy.
- 1 July 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 789-792
The effective nature of LAI as measured from remote sensing observations
This study investigates the retrieval performances of LAI using radiative transfer model inversion. The SAIL and GEOSAIL models were used here to evaluate the impact of the complexity of canopy architecture on LAI estimation. The inversion of SAIL or GEOSAIL models was carried out using a look up table technique. Test data sets were generated with SAIL and GEOSAIL to evaluate the performances. Results indicate first that the way the solution is selected within the LUT appeared to be very important. Comparing the inversion using SAIL or GEOSAIL over test cases simulated with SAIL or GEOSAIL show that consistency between the RTM used in the inversion process and the test cases improves the estimation. However, estimation of LAI for complex canopy architecture with non random distribution of leaves (clumping) is difficult when no prior information is available on the targets. However, it is demonstrated that the effective LAI, i.e. the LAI retrieved from the gap fraction measurements assuming. random leaf distribution, is estimated with much better accuracy.
- 1 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21586268,p. 1-4
Optimal band selection for future satellite sensor dedicated to soil science
Hyperspectral imaging systems could be used for identifying the different soil types from the satellites. However, detecting the reflectance of the soils in all the wavelengths involves the use of a large number of sensors with high accuracy and also creates a problem in transmitting the data to earth stations for processing. The current sensors can reach a bandwidth of 20 nm and hence, the reflectance obtained using the sensors are the integration of reflectance obtained in each of the wavelength present in the spectral band. Moreover, not all spectral bands contribute equally to classification and hence, identifying the bands necessary to have a good classification is necessary to reduce sensor cost and problem in data transmission from the satellite. The work presents the spectral bands selected using a PCA-Based Forward Sequential band selection algorithm.
- 1 August 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21586268,p. 1-4
Optimal band selection for future satellite sensor dedicated to soil science
Hyperspectral imaging systems could be used for identifying the different soil types from the satellites. However, detecting the reflectance of the soils in all the wavelengths involves the use of a large number of sensors with high accuracy and also creates a problem in transmitting the data to earth stations for processing. The current sensors can reach a bandwidth of 20 nm and hence, the reflectance obtained using the sensors are the integration of reflectance obtained in each of the wavelength present in the spectral band. Moreover, not all spectral bands contribute equally to classification and hence, identifying the bands necessary to have a good classification is necessary to reduce sensor cost and problem in data transmission from the satellite. The work presents the spectral bands selected using a PCA-Based Forward Sequential band selection algorithm.
- 1 July 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 45 (21536996) , III-141-141
Optimization of image parameters using a hyperspectral library application to soil identification and moisture estimation
The growing number of sensors raises questions about the image parameters required for the application, soil identification and moisture estimation. Hyperspectral images are also known to contain highly redundant information. Hence not all the spectral bands are needed for the satisfactory classification of the soil types. Hence, the work was aimed at obtaining these optimal spectral bands for identifying the soil types and to use these spectral bands to estimate the moisture content of the soils using the method proposed by Whiting et.al.
- 1 July 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 45 (21536996) , III-141-141
Optimization of image parameters using a hyperspectral library application to soil identification and moisture estimation
The growing number of sensors raises questions about the image parameters required for the application, soil identification and moisture estimation. Hyperspectral images are also known to contain highly redundant information. Hence not all the spectral bands are needed for the satisfactory classification of the soil types. Hence, the work was aimed at obtaining these optimal spectral bands for identifying the soil types and to use these spectral bands to estimate the moisture content of the soils using the method proposed by Whiting et.al.