Zhe Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhe Zhu has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Bing Gao
2 shared publicationsChunrao Dai
2 shared publicationsGuozhong Cao
Department of Materials Science and Engineering, University of Washington 2 , Seattle, Washington 98195, USA
2 shared publicationsXing Zou
School of Materials Science and Engineering, Xiangtan University 1 , Xiangtan, Hunan 411100
2 shared publicationsJinqiu Du
1 shared publication- Jinqiu Du
School of Materials Science and Engineering, Xiangtan University 1 , Xiangtan, Hunan 411105, People’s Republic of China
1 shared publication
Latest Publications
- Open Access
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Phase-field study on pore arrangement and porosity tailoring the electrocaloric effect in Ba₀.₇Sr₀.₃TiO₃ thin films via cooperative pinning effect
Porous structure tailoring is a promising approach to enhance ferroelectric electrocaloric (EC) performance, yet the role of pore arrangement in domain evolution remains unclear due to single-pore model limitations. We establish a 3D multi-pore phase-field model of lead-free Ba₀.₇Sr₀.₃TiO3 thin films under stress-free conditions to isolate intrinsic pore structure effects, validated by PFM characterizations of sol-gel-derived random porous films. Using this validated model, we examine how porosity and pore arrangement (random, square, hexagonal) affect EC behavior. Two synergistic mechanisms are identified: pore-edge polarization enhancement elevates ΔT, and domain wall pinning broadens the operating window. Cross-pore cooperative pinning, arising from coupled depolarization and elastic stress fields, effectively mitigates the inherent ΔT-window trade-off. The 0.1-porosity hexagonal array delivers ~3 K ΔT with <20% fluctuation over 300-400 K at 162 kV/cm. This work clarifies the pore-domain-EC correlation and advances fundamental understanding of domain engineering in porous ferroelectrics.
- 29 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhase-field study on pore arrangement and porosity tailoring the electrocaloric effect in Ba₀.₇Sr₀.₃TiO₃ thin films via cooperative pinning effect
Porous structure tailoring is a promising approach to enhance ferroelectric electrocaloric (EC) performance, yet the role of pore arrangement in domain evolution remains unclear due to single-pore model limitations. We establish a 3D multi-pore phase-field model of lead-free Ba₀.₇Sr₀.₃TiO3 thin films under stress-free conditions to isolate intrinsic pore structure effects, validated by PFM characterizations of sol-gel-derived random porous films. Using this validated model, we examine how porosity and pore arrangement (random, square, hexagonal) affect EC behavior. Two synergistic mechanisms are identified: pore-edge polarization enhancement elevates ΔT, and domain wall pinning broadens the operating window. Cross-pore cooperative pinning, arising from coupled depolarization and elastic stress fields, effectively mitigates the inherent ΔT-window trade-off. The 0.1-porosity hexagonal array delivers ~3 K ΔT with <20% fluctuation over 300-400 K at 162 kV/cm. This work clarifies the pore-domain-EC correlation and advances fundamental understanding of domain engineering in porous ferroelectrics.
- Open Access
- 9 June 2026
- Published by Elsevier in SSRN Electronic Journal
Regulation mechanism of pore structure on electrocaloric effect in Ba₀.₇Sr₀.₃TiO₃ thin films
Lead-free Ba₀.₇Sr₀.₃TiO₃ (BST) thin films, with a near-room-temperature phase transition, are promising for eco-friendly solid-state electrocaloric refrigeration, yet limited by intrinsically low adiabatic temperature change (ΔT) and narrow operating windows. We combine 3D phase-field simulations and piezoresponse force microscopy (PFM) via a progressive “experimental validation-simulation design” strategy, to systematically investigate BST films with random, square-arrayed, and hexagonal-arrayed pores. We reveal two synergistic ECE enhancement mechanisms: pore-edge polarization enhancement elevates ΔT, while domain wall pinning broadens the operating window. Ordered hexagonal arrays induce strong cross-pore cooperative pinning, achieving 41% higher ΔT (2.4 K vs 1.7 K) than random porous films at identical 0.3 porosity. The optimized 0.1-porosity hexagonal array delivers ~3 K ΔT with less than 20% fluctuation over 300-400 K at 162 kV/cm, outperforming most reported porous BST films. This work provides clear mechanistic insights and actionable design guidelines for high-performance lead-free electrocaloric materials.
- 9 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRegulation mechanism of pore structure on electrocaloric effect in Ba₀.₇Sr₀.₃TiO₃ thin films
Lead-free Ba₀.₇Sr₀.₃TiO₃ (BST) thin films, with a near-room-temperature phase transition, are promising for eco-friendly solid-state electrocaloric refrigeration, yet limited by intrinsically low adiabatic temperature change (ΔT) and narrow operating windows. We combine 3D phase-field simulations and piezoresponse force microscopy (PFM) via a progressive “experimental validation-simulation design” strategy, to systematically investigate BST films with random, square-arrayed, and hexagonal-arrayed pores. We reveal two synergistic ECE enhancement mechanisms: pore-edge polarization enhancement elevates ΔT, while domain wall pinning broadens the operating window. Ordered hexagonal arrays induce strong cross-pore cooperative pinning, achieving 41% higher ΔT (2.4 K vs 1.7 K) than random porous films at identical 0.3 porosity. The optimized 0.1-porosity hexagonal array delivers ~3 K ΔT with less than 20% fluctuation over 300-400 K at 162 kV/cm, outperforming most reported porous BST films. This work provides clear mechanistic insights and actionable design guidelines for high-performance lead-free electrocaloric materials.
- Open Access
- 23 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (4)
Phase field theoretical study of the electrocaloric effect in porous ferroelectric films
It has been experimentally observed that changes in the nanopore structure have a great impact on the ferroelectric domain structure, and then, the ferroelectric polarization value of the film can be controlled to increase the response of the electrocaloric effect. This phenomenon has great application prospects in refrigeration applications. In this study, the evolution process of the domain structure of porous ferroelectric films of Pb0.7 Sr0.3TiO3 (PST) with different pore shapes was obtained through phase field simulation, and the influence of the pore shape on the performance of electrocaloric was predicted and analyzed. The results show that different shapes of pores can control the magnitude of the adiabatic temperature change. Among them, the anisometric ellipse shaped pore thin film can obtain a maximum adiabatic temperature change of 8 K, which is a significant improvement compared with traditional PST ceramics and PST non-porous films. This large adiabatic temperature change is due to the pore-induced domain switching. Therefore, controlling the pore shapes provides a new idea for optimizing the electrocaloric properties of porous ferroelectric thin films.
- 23 January 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (4)
Open AccessPhase field theoretical study of the electrocaloric effect in porous ferroelectric films
It has been experimentally observed that changes in the nanopore structure have a great impact on the ferroelectric domain structure, and then, the ferroelectric polarization value of the film can be controlled to increase the response of the electrocaloric effect. This phenomenon has great application prospects in refrigeration applications. In this study, the evolution process of the domain structure of porous ferroelectric films of Pb0.7 Sr0.3TiO3 (PST) with different pore shapes was obtained through phase field simulation, and the influence of the pore shape on the performance of electrocaloric was predicted and analyzed. The results show that different shapes of pores can control the magnitude of the adiabatic temperature change. Among them, the anisometric ellipse shaped pore thin film can obtain a maximum adiabatic temperature change of 8 K, which is a significant improvement compared with traditional PST ceramics and PST non-porous films. This large adiabatic temperature change is due to the pore-induced domain switching. Therefore, controlling the pore shapes provides a new idea for optimizing the electrocaloric properties of porous ferroelectric thin films.
- 1 January 2024
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 73 (10) , 100501
Simulation of surface stress and solid solution modification phase field of nanowire electrocaloric effect
以铁电纳米线为填料的复合薄膜表现出了满足固态制冷需求的高绝热温变,其平行分布填充的纳米线因和传统垂直分布的取向不同,被认为是获得大电卡效应的关键因素,然而其大电卡效应的内在机理尚不十分明确。因此本文以PbTiO3纳米线为研究对象,建立平行分布纳米线模型,通过相场模拟研究表面应力和固溶改性对其电卡效应的影响。结果表明,表面应力和固溶改性能够分别调控纳米线相变温度并获取大的绝热温变,并最终实现了在600kV/cm电场下,0~300℃的宽温度区间获得大于6K绝热温变的效果。同时结合三维畴结构的演变,揭示了诱发不同畴翻转类型是平行分布纳米线结构获得大电卡效应的内在机理。通过本研究为基于平行分布铁电纳米线电卡效应的固态制冷技术发展提供了有益的理论指导。
- 1 January 2024
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 73 (10) , 100501
Simulation of surface stress and solid solution modification phase field of nanowire electrocaloric effect
以铁电纳米线为填料的复合薄膜表现出了满足固态制冷需求的高绝热温变,其平行分布填充的纳米线因和传统垂直分布的取向不同,被认为是获得大电卡效应的关键因素,然而其大电卡效应的内在机理尚不十分明确。因此本文以PbTiO3纳米线为研究对象,建立平行分布纳米线模型,通过相场模拟研究表面应力和固溶改性对其电卡效应的影响。结果表明,表面应力和固溶改性能够分别调控纳米线相变温度并获取大的绝热温变,并最终实现了在600kV/cm电场下,0~300℃的宽温度区间获得大于6K绝热温变的效果。同时结合三维畴结构的演变,揭示了诱发不同畴翻转类型是平行分布纳米线结构获得大电卡效应的内在机理。通过本研究为基于平行分布铁电纳米线电卡效应的固态制冷技术发展提供了有益的理论指导。
- 20 April 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (25) , 255501
Current and deformation induced by voltage in the single LiNi0.8Co0.1Mn0.1O2 particle from atomic force microscopy technique and phase field simulation
One of the key factors affecting lithium-ion battery electrode materials’ efficiency is the process of lithiation and delithiation. Studies of the electrochemical behavior of Ni-rich active electrode materials at the nanoscale have largely been focused on macroscopic measurements, but few have investigated the intrinsic microscopic mechanism underlying their failure. In this paper, lithium-ion diffusion current and surface deformation of single LiNi0.8Co0.1Mn0.1O2 (NCM811) nanoparticles under external electric fields were measured by atomic force microscopy (AFM) techniques. Then, the current and deformation of NCM811 single particle under the applied voltage were simulated by phase field method to analyze electrochemical behaviors of the particle from experiments based on the electrochemical-mechanical coupled model. The simulation results revealed that the change of lithium-ion concentration and stress in particles are the factors leading to the evolution of current and deformation under applied voltage observed by AFM.
- 20 April 2023
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (25) , 255501
Current and deformation induced by voltage in the single LiNi0.8Co0.1Mn0.1O2 particle from atomic force microscopy technique and phase field simulation
One of the key factors affecting lithium-ion battery electrode materials’ efficiency is the process of lithiation and delithiation. Studies of the electrochemical behavior of Ni-rich active electrode materials at the nanoscale have largely been focused on macroscopic measurements, but few have investigated the intrinsic microscopic mechanism underlying their failure. In this paper, lithium-ion diffusion current and surface deformation of single LiNi0.8Co0.1Mn0.1O2 (NCM811) nanoparticles under external electric fields were measured by atomic force microscopy (AFM) techniques. Then, the current and deformation of NCM811 single particle under the applied voltage were simulated by phase field method to analyze electrochemical behaviors of the particle from experiments based on the electrochemical-mechanical coupled model. The simulation results revealed that the change of lithium-ion concentration and stress in particles are the factors leading to the evolution of current and deformation under applied voltage observed by AFM.
- 9 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (2) , 025301
In situ probing conductivity and deformation of single Ni-rich Li[Ni0.885Co0.1Al0.015]O2 and Li[Ni0.885Co0.1V0.015]O2 nanoparticles by scanning probe microscopy
Li[Ni0.885Co0.1V0.015]O2 (NCV), Li[Ni0.9Co0.1]O2 (NC), and Li[Ni0.885Co0.1Al0.015]O2 (NCA) nanoparticles are synthesized by means of oxalic acid co-precipitation with subsequent calcination. The evolution of Li-ion diffusion and deformation of both NCV and NCA under an external electric field are characterized by means of conductive atomic force microscopy and electrochemical strain microscopy. Macroscopic electrochemical characterization reveals that the Li-ion diffusivity in NCA is greater than that in NCV, and the undesirable irreversible H2–H3 phase transition occurs more readily in NCV than in NCA. The scanning probe microscopy results corroborate well with the macroscopic electrochemical measurements, which tell that vanadium and aluminum substitution can accelerate Li+ diffusion kinetics and enhance the reversibility of the H2–H3 phase transformation during the electrochemical process in varying degrees.
- 9 January 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (2) , 025301
In situ probing conductivity and deformation of single Ni-rich Li[Ni0.885Co0.1Al0.015]O2 and Li[Ni0.885Co0.1V0.015]O2 nanoparticles by scanning probe microscopy
Li[Ni0.885Co0.1V0.015]O2 (NCV), Li[Ni0.9Co0.1]O2 (NC), and Li[Ni0.885Co0.1Al0.015]O2 (NCA) nanoparticles are synthesized by means of oxalic acid co-precipitation with subsequent calcination. The evolution of Li-ion diffusion and deformation of both NCV and NCA under an external electric field are characterized by means of conductive atomic force microscopy and electrochemical strain microscopy. Macroscopic electrochemical characterization reveals that the Li-ion diffusivity in NCA is greater than that in NCV, and the undesirable irreversible H2–H3 phase transition occurs more readily in NCV than in NCA. The scanning probe microscopy results corroborate well with the macroscopic electrochemical measurements, which tell that vanadium and aluminum substitution can accelerate Li+ diffusion kinetics and enhance the reversibility of the H2–H3 phase transformation during the electrochemical process in varying degrees.
- 24 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 4 (2) , 1294-1304
Ferroelectricity and Piezoelectricity of Na0.5Bi0.5TiO3 Nanotube Arrays: Implications for Functional Electronic Devices
- 24 January 2021
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 4 (2) , 1294-1304
Ferroelectricity and Piezoelectricity of Na0.5Bi0.5TiO3 Nanotube Arrays: Implications for Functional Electronic Devices
- 13 September 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (48) , 485106
Time-dependent characteristics and physical mechanisms of AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors under different bias conditions
We experimentally investigate the time-dependent degradation of AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors subjected to different bias conditions. By means of the combined performance under OFF/SEMI-ON/ON state bias conditions, the dependence of threshold voltage ( V th ), maximum transconductance ( g m ) and saturation drain current ( I dsat ) on stress mode are revealed. In the OFF-state, with the high temperature reverse bias stress, the main mechanism is the charge-trapping in the gate dielectric layer, leading to the recoverable negative shift of the V th . In the SEMI-ON-state, because of the hot-carrier injection, the hot electrons could break the Si–H bonds, resulting in the generation of interface states and can also be captured by the trap states in the AlGaN barrier or GaN buffer. This effect will cause the decrease of saturation drain current and an unrecoverable V th negative shift. In the ON-state, due to the attenuation of hot electrons effect, V th hardly changes, while I dsat has a dramatic decrease caused by the self-heating effect. Low frequency noise characteristics were used to extract the defect state density, which then increases by about three orders of magnitude after SEMI-ON-state stress.
- 13 September 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (48) , 485106
Time-dependent characteristics and physical mechanisms of AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors under different bias conditions
We experimentally investigate the time-dependent degradation of AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors subjected to different bias conditions. By means of the combined performance under OFF/SEMI-ON/ON state bias conditions, the dependence of threshold voltage ( V th ), maximum transconductance ( g m ) and saturation drain current ( I dsat ) on stress mode are revealed. In the OFF-state, with the high temperature reverse bias stress, the main mechanism is the charge-trapping in the gate dielectric layer, leading to the recoverable negative shift of the V th . In the SEMI-ON-state, because of the hot-carrier injection, the hot electrons could break the Si–H bonds, resulting in the generation of interface states and can also be captured by the trap states in the AlGaN barrier or GaN buffer. This effect will cause the decrease of saturation drain current and an unrecoverable V th negative shift. In the ON-state, due to the attenuation of hot electrons effect, V th hardly changes, while I dsat has a dramatic decrease caused by the self-heating effect. Low frequency noise characteristics were used to extract the defect state density, which then increases by about three orders of magnitude after SEMI-ON-state stress.
- 1 August 2018
- Published by Elsevier in Current Applied Physics
- Vol. 18 (8) , 886-892
The effect of annealing temperature on the morphology and piezoelectric characteristics of BaTiO3 nanofibers and domain switching under different temperatures
- 1 August 2018
- Published by Elsevier in Current Applied Physics
- Vol. 18 (8) , 886-892
The effect of annealing temperature on the morphology and piezoelectric characteristics of BaTiO3 nanofibers and domain switching under different temperatures