PWPaul Bryan Wilkinson

Paul Bryan Wilkinson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Paul Bryan Wilkinson has a total of 69 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Implications of heterogeneous embankment conditions for geoelectrical investigations on dams: A case study at Mactaquac Dam, Canada

    by John S. Ball, Karl E. Butler, Jonathan E. Chambers, Paul B. Wilkinson, Andrew Binley

    Electrical resistivity tomography (ERT) has been shown to be effective for surveying and monitoring dams, due to the method's sensitivity to moisture content and relevant physical properties (e.g., porosity). Automated ERT systems, capable of time‐lapse monitoring, can be used to detect variations in ground conditions. However, dam environments are often structurally heterogenous due to, for example, zoned embankments, supporting bedrock or concrete structures and adjoining headponds. If such factors are not accounted for, off‐grid effects may obscure and distort features of interest (e.g., leakage zones) in resulting ERT images. Synthetic modelling simulating conditions at Mactaquac Dam, Canada, was carried out to evaluate whether the abutting concrete structure and properties of the adjacent headpond (water resistivity and level variations) need to be accounted for in an inversion of ERT data. This was achieved through a synthetic numerical model of the dam, including headpond, concrete abutment, core and dry and wet rockfill components. The results show that internal features and dynamic changes through time (e.g., headpond level and resistivity variation) can induce 3D effects in the inversions, which have the potential to be misinterpreted. The modelling revealed that leakage zones could be resolved, showing that features of interest in dam monitoring can still be identified despite potential 3D effects. Overall, these results show that 3D effects from internal structure and a water body are likely to distort modelled resistivity distributions in dam settings. This research sheds light on how ERT can be impacted by structural complexity in dams, using synthetic modelling to understand and quantify the nature of expected artefacts resulting from heterogeneities outside the footprint of the survey area.


  • Open Access

    Multiphysical monitoring of a thermal plume during mine water geothermal experimentation

    by Andres Gonzalez Quiros, Alison Monaghan, Mylene Receveur, Paul Wilkinson, David Boon, Kyle Walker-Verkuil, Vanessa Starcher, Donald John MacAllister, Oliver Kuras

    The rate and magnitude of conductive and advective thermal processes that control the efficiency and sustainability of mine water geothermal and thermal energy storage are poorly quantified. We present results of multiphysical observations collected during a 25-day heat extraction experiment performed on an abstraction–reinjection mine water well doublet at the UK Geoenergy Observatory in Glasgow. The results showed how the thermal plume generated by injection of cool water developed from the injection borehole, mainly driven by advection at the level of mine workings. Heat conduction around the cased part of the injection borehole resulted in different cooling rates related to lithological variations, clearly shown in the distribute temperature sensing data. The electrical resistivity tomography monitoring provided a time-lapse image of the evolution of the cool plume, which extended laterally within the mine workings to pass a borehole located at 10 m away in less than 2 days, and later above the mine workings into the bedrock. It also showed how the effects of cooling remained for at least 18 days after the injection stopped, providing new insight into thermal storage behaviour of mine water systems. The results provide an unprecedented opportunity to visualize the effects of geothermal operation in mine water settings and are useful guidance for project developers and regulators.


  • Open Access

    Coupled Hydrogeophysical Modeling to Constrain Unsaturated Soil Parameters for a Slow‐Moving Landslide

    by J. P. Boyd, J. E. Chambers, P. B. Wilkinson, P. I. Meldrum, E. Bruce, A. Binley

    Geophysical methods have proven to be useful for investigating unstable slopes as they are both non‐invasive and sensitive to the spatial distribution of physical properties in the subsurface. Of particular interest are the links between electrical resistivity and near‐surface moisture content; recent work has demonstrated that it is possible to calibrate hydrological models using geophysical measurements. In this study we explore the use of in‐field electrical resistivity data for calibrating unsaturated soil retention parameters and saturated hydraulic conductivity used for modeling unsaturated fluid flow. We study a synthetic case study, and a well‐characterized site in the northeast of England and develop an approach to calibrate retention parameters for a mudstone and a sandstone formation, the former being an actively failing unit. Petrophysical relationships between electrical resistivity and moisture content (or saturation) are established for both formations. 2D hydrological models are driven by effective rainfall estimations; subsequently these models are coupled with a geophysical forward model via a Markov chain Monte Carlo approach. For the synthetic case, we show that our modeling approach is sensitive to the moisture retention parameters, while less so to saturated hydraulic conductivity. We observe the same characteristics and sensitivities for the field case, albeit with a greater data misfit. Further hydrological simulations suggest that the slope retained high moisture contents in the months preceding a rotational failure. Therefore, we propose that coupled hydrological and geophysical modeling approaches could aid in enhancing landslide monitoring, modeling, and early warning efforts.


  • Open Access

    Practical considerations for using petrophysics and geoelectrical methods on clay rich landslides

    by James P. Boyd, Andrew Binley, Paul Wilkinson, Jessica Holmes, Edward Bruce, Jonathan Chambers


  • Open Access

    Resistivity imaging of river embankments: 3D effects due to varying water levels in tidal rivers

    by John Ball, Jonathan Chambers, Paul Wilkinson, Andrew Binley

    Electrical resistivity tomography (ERT) has seen increased use in the monitoring the condition of river embankments, due to its spatial subsurface coverage, sensitivity to changes in internal states, such as moisture content, and ability to identify seepage and other erosional process with time‐lapse ERT. Two‐dimensional ERT surveys are commonly used due to time and site constraints, but they are often sensitive to features of anomalous resistivity proximal to the survey line, which can distort the resultant inversion as a three‐dimensional (3D) effect. In a tidal embankment, these 3D effects may result from changing water levels and river water salinities. ERT monitoring data at Hadleigh Marsh, UK, showed potential evidence of 3D effects from local water bodies. Synthetic modelling was used to quantify potential 3D effects on tidal embankments. The modelling shows that a 3D effect in a tidal environment occurs (for the geometries studied) when surveys are undertaken at high water levels and at distances less than 4.5 m from the electrode array with 1 m spacing. The 3D effect in the modelling is enhanced in brackish waters, which are common in tidal environments, and with larger electrode spacing. Different geologies, river water compositions, and proximities to the model parameters are expected to induce a varied 3D effect on the ERT data in terms of magnitude, and these should be considered when surveying to minimize artefacts in the data. This research highlights the importance of appropriate geoelectrical measurement design for tidal embankment characterization, particularly with proximal and saline water bodies.


  • Open Access

    The Application of Electromagnetic Induction Methods to Reveal the Hydrogeological Structure of a Riparian Wetland

    by Paul McLachlan, Guillaume Blanchy, Jonathan Chambers, James Sorensen, Sebastian Uhlemann, Paul Wilkinson, Andrew Binley

    Understanding ecologically sensitive wetlands often requires non‐invasive methods to characterize their complex structure (e.g., deposit heterogeneity) and hydrogeological parameters (e.g., porosity and hydraulic conductivity). Here, electrical conductivities of a riparian wetland were obtained using frequency domain electromagnetic induction (EMI) methods. The wetland was previously characterized by extensive intrusive measurements and 3D electrical resistivity tomography (ERT) surveys and hence offers an ideal opportunity to objectively assess EMI methods. Firstly, approaches to obtain structural information (e.g., elevation and thickness of alluvium) from EMI data and inverted models were assessed. Regularized and sharp inversion algorithms were investigated for ERT calibrated EMI data. Moreover, the importance of EMI errors in inversion was investigated. The hydrological information content was assessed using correlations with piezometric data and petrophysical models. It was found that EMI data were dominated by the thickness of peaty alluvial soils and relatively insensitive to topography and total alluvial thickness. Furthermore, although error weighting in the inversion improved the accuracy of alluvial soil thickness predictions, the multi‐linear regression method performed the best. For instance, an iso‐conductivity method to estimate the alluvial soil thickness in the regularized models had a normalized mean absolute difference (NMAD) of 21.4%, and although this performed better than the sharp inversion algorithm (NMAD = 65.3%), the multi‐linear regression approach (using 100 intrusive observations) achieved a NMAD = 18.0%. In terms of hydrological information content, correlations between EMI results and piezometric data were poor, however robust relationships between petrophysically derived porosity and hydraulic conductivity were observed for the alluvial soils and gravels.


  • Inversion of 3-D Vector Arrays Geoelectrical Data Sets using Amplitude and Direction Components

    by M.H. Loke, J. Gance, P.B. Wilkinson, J. Malet, C. Truffert, O. Leite

  • Open Access

    Electromagnetic induction methods reveal wetland hydrogeological structure and properties

    by Paul McLachlan, Guillaume Blanchy, Jonathan Edward Chambers, James Sorensen, Sebastian Uhlemann, Paul Bryan Wilkinson, Andrew Binley

    Understanding sensitive wetlands often requires non-invasive methods to characterize their complex geological structure and hydrogeological parameters. Here, geoelectrical characterization is explored by employing frequency-domain electromagnetic induction (EMI) at a site previously characterized by extensive intrusive measurements and 3D electrical resistivity tomography (ERT). This work investigates the performance of several approaches to obtain structural information from EMI data and sharp and smooth inversions. Additionally, the hydrological information content of EMI data is investigated using correlation with piezometric measurements, established petrophysical relationships, and synthetic modeling. EMI measurements were dominated by peat thickness and were relatively insensitive to both topography and depth to bedrock. An iso-conductivity method for peat depth estimation had a normalized mean absolute difference (NMAD) of 23.5%, and although this performed better than the sharp inversion algorithm (NMAD = 73.5%), a multi-linear regression approach achieved a more accurate prediction with only 100 measurements (NMAD = 17.8%). In terms of hydrological information content, it was not possible to unravel correlation causation at the site, however, synthetic modeling demonstrates that the EMI measurements are predominantly controlled by the electrical conductivity of the upper peat pore-water and not the thickness of the unsaturated zone or the lower peat pore-water conductivity. Additionally, a priori information significantly improves the potential for time-lapse applications in similar environments. This study provides an objective overview and insights for future EMI applications in similar environments. It also covers areas seldom investigated in EMI studies, e.g. error quantification and the depth of investigation of ERT models used for EMI calibration.


  • Open Access

    Electromagnetic induction methods reveal wetland hydrogeological structure and properties

    by Paul McLachlan, Guillaume Blanchy, Jonathan Edward Chambers, James Sorensen, Sebastian Uhlemann, Paul Bryan Wilkinson, Andrew Binley

    Understanding sensitive wetlands often requires non-invasive methods to characterize their complex geological structure and hydrogeological parameters. Here, geoelectrical characterization is explored by employing frequency-domain electromagnetic induction (EMI) at a site previously characterized by extensive intrusive measurements and 3D electrical resistivity tomography (ERT). This work investigates the performance of several approaches to obtain structural information from EMI data and sharp and smooth inversions. Additionally, the hydrological information content of EMI data is investigated using correlation with piezometric measurements, established petrophysical relationships, and synthetic modeling. EMI measurements were dominated by peat thickness and were relatively insensitive to both topography and depth to bedrock. An iso-conductivity method for peat depth estimation had a normalized mean absolute difference (NMAD) of 23.5%, and although this performed better than the sharp inversion algorithm (NMAD = 73.5%), a multi-linear regression approach achieved a more accurate prediction with only 100 measurements (NMAD = 17.8%). In terms of hydrological information content, it was not possible to unravel correlation causation at the site, however, synthetic modeling demonstrates that the EMI measurements are predominantly controlled by the electrical conductivity of the upper peat pore-water and not the thickness of the unsaturated zone or the lower peat pore-water conductivity. Additionally, a priori information significantly improves the potential for time-lapse applications in similar environments. This study provides an objective overview and insights for future EMI applications in similar environments. It also covers areas seldom investigated in EMI studies, e.g. error quantification and the depth of investigation of ERT models used for EMI calibration.

  • Top Cited Papers
    Open Access

    Geophysical Monitoring of Moisture‐Induced Landslides: A Review

    by J. S. Whiteley, J. E. Chambers, S. Uhlemann, P. B. Wilkinson, J. M. Kendall

    Geophysical monitoring of landslides can provide insights into spatial and temporal variations of subsurface properties associated with slope failure. Recent improvements in equipment, data analysis, and field operations have led to a significant increase in the use of such techniques in monitoring. Geophysical methods complement intrusive approaches, which sample only a very small proportion of the subsurface, and walk‐over or remotely sensed data, which principally provide information only at the ground surface. In particular, recent studies show that advances in geophysical instrumentation, data processing, modeling, and interpretation in the context of landslide monitoring are significantly improving the characterization of hillslope hydrology and soil and rock hydrology and strength and their dynamics over time. This review appraises the state of the art of geophysical monitoring, as applied to moisture‐induced landslides. Here we focus on technical and practical uses of time‐lapse methods in geophysics applied to monitoring moisture‐induced landslide. The case studies identified in this review show that several geophysical techniques are currently used in the monitoring of subsurface landslide processes. These geophysical contributions to monitoring and predicting the evolution of landslide processes are currently underrealized. Hence, the further integration of multiple‐parametric and geotechnically coupled geophysical monitoring systems has considerable potential. The complementary nature of certain methods to map the distribution of subsurface moisture and elastic moduli will greatly increase the predictive and monitoring capacity of early warning systems in moisture‐induced landslide settings.