Peter Hugh McBreen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Hugh McBreen has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Guillaume Goubert
Université du Québec à Montréal
12 shared publications - Michael N. Groves
Department of Chemistry and Biochemistry, California State University Fullerton, Fullerton, California 92831, United States
12 shared publications - Yi Dong
Department of Chemistry and FQRNT Centre in Green Chemistry and Catalysis, Laval University , Quebec City, Quebec G1V 0A6, Canada
10 shared publications - Bjørk Hammer
Center for Interstellar Catalysis, Department of Physics and Astronomy, Aarhus University, DK-8000 Aarhus C, Denmark
9 shared publications Vincent Demers-Carpentier
Univ Laval, Dept Chem, Quebec City, PQ G1K 7P4, Canada
9 shared publicationsGautier Mahieu
Centre de recherche sur les propriétés des interfaces et la catalyse (CERPIC) and Département de chimie, Université Laval, Québec, QC G1V 0A6, Canada
6 shared publications
Latest Publications
- 15 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (21) , 7400-7406
Ab Initio Insights into the Early Stages of Methane Dehydroaromatization on Gallium Nitride
- 15 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 130 (21) , 7400-7406
Ab Initio Insights into the Early Stages of Methane Dehydroaromatization on Gallium Nitride
- Open Access
- 25 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
A Combinatorial Ab Initio Study of Methane Dehydroaromatization Pathways on Wurtzite Gallium Nitride
Methane dehydroaromatization (MDA) offers a direct route for the non-oxidative valorization of methane into aromatic hydrocarbons. Wurtzite gallium nitride has been reported experimentally to catalyze MDA near 450°C, yet the later stages of the reaction remain poorly understood. Here, we developed and applied a high-throughput combinatorial ab-initio framework to propose two thermally accessible MDA pathways on GaN: the C₃+C₃ and C₄+C₂ mechanisms. Methylene and ethylene, which form readily with barriers of 1.79eV and 1.44eV, respectively, emerge as key C₁ and C₂ intermediates. The rate-determining step in the C₃+C₃ pathway is ethyl formation (3.41eV), whereas the C₄ + C₂ route proceeds through a lower-barrier vinyl dehydrogenation (2.89eV) involving strongly bound acetylene intermediates. The unique geometry of the GaN surface, characterized by the spacing and orientation of surface Ga-N bonds, stabilizes both C₃ and C₄ intermediates and promotes the coupling steps that yield benzene. Several thermodynamically stable intermediates may act as kinetic traps, rationalizing observed by-products such as ethylene and cyclohexane. These findings provide a comprehensive mechanistic framework for MDA on GaN and underscore the catalytic potential of non-oxide nitrides for hydrocarbon activation and coupling.
- 25 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessA Combinatorial Ab Initio Study of Methane Dehydroaromatization Pathways on Wurtzite Gallium Nitride
Methane dehydroaromatization (MDA) offers a direct route for the non-oxidative valorization of methane into aromatic hydrocarbons. Wurtzite gallium nitride has been reported experimentally to catalyze MDA near 450°C, yet the later stages of the reaction remain poorly understood. Here, we developed and applied a high-throughput combinatorial ab-initio framework to propose two thermally accessible MDA pathways on GaN: the C₃+C₃ and C₄+C₂ mechanisms. Methylene and ethylene, which form readily with barriers of 1.79eV and 1.44eV, respectively, emerge as key C₁ and C₂ intermediates. The rate-determining step in the C₃+C₃ pathway is ethyl formation (3.41eV), whereas the C₄ + C₂ route proceeds through a lower-barrier vinyl dehydrogenation (2.89eV) involving strongly bound acetylene intermediates. The unique geometry of the GaN surface, characterized by the spacing and orientation of surface Ga-N bonds, stabilizes both C₃ and C₄ intermediates and promotes the coupling steps that yield benzene. Several thermodynamically stable intermediates may act as kinetic traps, rationalizing observed by-products such as ethylene and cyclohexane. These findings provide a comprehensive mechanistic framework for MDA on GaN and underscore the catalytic potential of non-oxide nitrides for hydrocarbon activation and coupling.
- Open Access
- 25 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Ab Initio Insights into the Early Stages of Methane Dehydroaromatization on Gallium Nitride
Methane dehydroaromatization (MDA) offers a promising non-oxidative route for converting methane into value-added aromatic hydrocarbons. Wurtzite gallium nitride (GaN) has demonstrated catalytic activity for this transformation at temperatures as low as 450°C, although the underlying mechanism remains incompletely understood. In this study, the initial steps of MDA on the GaN m-plane surface were investigated using density functional theory. A low-barrier pathway for methylene (CH₂) formation was identified, enabled by the migration of surface methyl and hydrogen species with similarly low barriers. This mechanism significantly lowers the activation barrier relative to previous estimates. Beyond dehydrogenation and migration, we examined the coupling of C₁ intermediates to form C₂ species, including ethyl, ethane, and ethylene. C-C bond-formation steps leading to ethane and ethylene were found to proceed with barriers comparable to that of CH₂ formation. These results indicate that methane activation on GaN is not governed by a single high-barrier step; instead, dehydrogenation, migration, and coupling each contribute comparable kinetic bottlenecks. Overall, the findings revise the mechanistic understanding of methane activation on GaN and underscore the importance of site availability and adsorbate mobility in enabling selective low-temperature reactivity.
- 25 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAb Initio Insights into the Early Stages of Methane Dehydroaromatization on Gallium Nitride
Methane dehydroaromatization (MDA) offers a promising non-oxidative route for converting methane into value-added aromatic hydrocarbons. Wurtzite gallium nitride (GaN) has demonstrated catalytic activity for this transformation at temperatures as low as 450°C, although the underlying mechanism remains incompletely understood. In this study, the initial steps of MDA on the GaN m-plane surface were investigated using density functional theory. A low-barrier pathway for methylene (CH₂) formation was identified, enabled by the migration of surface methyl and hydrogen species with similarly low barriers. This mechanism significantly lowers the activation barrier relative to previous estimates. Beyond dehydrogenation and migration, we examined the coupling of C₁ intermediates to form C₂ species, including ethyl, ethane, and ethylene. C-C bond-formation steps leading to ethane and ethylene were found to proceed with barriers comparable to that of CH₂ formation. These results indicate that methane activation on GaN is not governed by a single high-barrier step; instead, dehydrogenation, migration, and coupling each contribute comparable kinetic bottlenecks. Overall, the findings revise the mechanistic understanding of methane activation on GaN and underscore the importance of site availability and adsorbate mobility in enabling selective low-temperature reactivity.
- Open Access
- 1 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (64) , 11987-11990
Computational design of gallium imides for methane activation
In this work, computational modeling is used to modify NacNac gallium imide, which has recently been shown to cleave unactivated sp3 C–H bonds in organic substrates, with the aim of making it suitable for methane activation.
- 1 July 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (64) , 11987-11990
Open AccessComputational design of gallium imides for methane activation
In this work, computational modeling is used to modify NacNac gallium imide, which has recently been shown to cleave unactivated sp3 C–H bonds in organic substrates, with the aim of making it suitable for methane activation.
- Open Access
- 10 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Computational Design of Gallium Imides for Methane Activation
Activation of the strong non-polar C-H bonds in methane is difficult, especially in solution. In this work, computational modeling is used to modify NacNac gallium imide, which has recently been shown to cleave unactivated sp3 C-H bonds in organic substrates with the aim of making it suitable for methane activation. Density functional theory predicts that the 123 kJ mol−1 methane activation barrier for the experimentally employed gallium imide can be reduced to 93 kJ mol−1 by changing substituents around the active gallium center. Furthermore, pre-straining the gallium imide reduces the reaction barrier to just 62 kJ mol−1. Dimerization of the gallium imides can be prevented with bulky groups that do not affect the reaction barrier. Several modified NacNac gallium imides are thus shown to be viable for the homogeneous activation of methane and higher alkanes.
- 10 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessComputational Design of Gallium Imides for Methane Activation
Activation of the strong non-polar C-H bonds in methane is difficult, especially in solution. In this work, computational modeling is used to modify NacNac gallium imide, which has recently been shown to cleave unactivated sp3 C-H bonds in organic substrates with the aim of making it suitable for methane activation. Density functional theory predicts that the 123 kJ mol−1 methane activation barrier for the experimentally employed gallium imide can be reduced to 93 kJ mol−1 by changing substituents around the active gallium center. Furthermore, pre-straining the gallium imide reduces the reaction barrier to just 62 kJ mol−1. Dimerization of the gallium imides can be prevented with bulky groups that do not affect the reaction barrier. Several modified NacNac gallium imides are thus shown to be viable for the homogeneous activation of methane and higher alkanes.
- 5 January 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (5) , 4083-4090
N-heterocyclic carbene adsorption states on Pt(111) and Ru(0001)
N-heterocyclic carbene ligands (NHCs) are increasingly used to tune the properties of metal surfaces. The generally greater chemical and thermal robustness of NHCs on gold, as compared to thiolate surface ligands, underscores their potential for a range of applications. While much is now known about the adsorption geometry, overlayer structure, dynamics, and stability of NHCs on coinage elements, especially gold and copper, much less is known about their interaction with the surfaces of Pt-group metals, despite the importance of such metals in catalysis and electrochemistry. In this study, reflection absorption infrared spectroscopy (RAIRS) is used to probe the structure of benzimidazolylidene NHC ligands on Pt(111) and Ru(0001). The experiments exploit the intense absorption peaks of a CF3 substituent on the phenyl ring of the NHC backbone to provide unprecedented insight into adsorption geometry and chemical stability. The results also permit comparison with literature data for NHC ligands on Au(111) and to DFT predictions for NHCs on Pt(111) and Ru(0001), thereby greatly extending the known surface chemistry of NHCs and providing much needed molecular information for the design of metal–organic hybrid materials involving strongly reactive metals.
- 5 January 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (5) , 4083-4090
N-heterocyclic carbene adsorption states on Pt(111) and Ru(0001)
N-heterocyclic carbene ligands (NHCs) are increasingly used to tune the properties of metal surfaces. The generally greater chemical and thermal robustness of NHCs on gold, as compared to thiolate surface ligands, underscores their potential for a range of applications. While much is now known about the adsorption geometry, overlayer structure, dynamics, and stability of NHCs on coinage elements, especially gold and copper, much less is known about their interaction with the surfaces of Pt-group metals, despite the importance of such metals in catalysis and electrochemistry. In this study, reflection absorption infrared spectroscopy (RAIRS) is used to probe the structure of benzimidazolylidene NHC ligands on Pt(111) and Ru(0001). The experiments exploit the intense absorption peaks of a CF3 substituent on the phenyl ring of the NHC backbone to provide unprecedented insight into adsorption geometry and chemical stability. The results also permit comparison with literature data for NHC ligands on Au(111) and to DFT predictions for NHCs on Pt(111) and Ru(0001), thereby greatly extending the known surface chemistry of NHCs and providing much needed molecular information for the design of metal–organic hybrid materials involving strongly reactive metals.
- 10 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (46) , 19667-19675
Intermediates and Bimolecular Structures Formed through Thermal and Tip-Induced Partial Dehydrogenation of 2,2,2-Trifluoro-1-phenylethanol on Pt(111)
- 10 November 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (46) , 19667-19675
Intermediates and Bimolecular Structures Formed through Thermal and Tip-Induced Partial Dehydrogenation of 2,2,2-Trifluoro-1-phenylethanol on Pt(111)
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (44)
Substrate Tumbling in a Chemisorbed Diastereomeric α‐Ketoester/1‐(1‐Naphthyl)ethylamine Complex
Scanning tunneling microscopy (STM) data for α‐ketoester/1‐(1‐naphthyl)ethylamine complexes on Pt(111) reveal a tumbling motion that couples two neighboring binding states. The interconversion, resulting in prochiral inversion of the α‐ketoester, occurs in single complexes without breaking them apart. This is a surprising observation because the overall motion requires rotation of the α‐ketoester away from the surface without branching exclusively into diffusion away from the complex or desorption. The multi‐step interconversion is rationalized in terms of sequences of bound states that combine transient H‐bond interactions with the chiral molecule and weakened adsorption interactions with the metal. The observation of tumbling in single long‐lived complexes is of relevance to self‐assembly and directed molecular motion on surfaces, to ligand‐controlled surface reactions, and most directly to stereocontrol in asymmetric heterogeneous catalysis.
- 30 September 2022
- Published by Wiley in Angewandte Chemie
- Vol. 134 (44)
Substrate Tumbling in a Chemisorbed Diastereomeric α‐Ketoester/1‐(1‐Naphthyl)ethylamine Complex
Scanning tunneling microscopy (STM) data for α‐ketoester/1‐(1‐naphthyl)ethylamine complexes on Pt(111) reveal a tumbling motion that couples two neighboring binding states. The interconversion, resulting in prochiral inversion of the α‐ketoester, occurs in single complexes without breaking them apart. This is a surprising observation because the overall motion requires rotation of the α‐ketoester away from the surface without branching exclusively into diffusion away from the complex or desorption. The multi‐step interconversion is rationalized in terms of sequences of bound states that combine transient H‐bond interactions with the chiral molecule and weakened adsorption interactions with the metal. The observation of tumbling in single long‐lived complexes is of relevance to self‐assembly and directed molecular motion on surfaces, to ligand‐controlled surface reactions, and most directly to stereocontrol in asymmetric heterogeneous catalysis.
- 29 September 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (44) , e202210076
Substrate Tumbling in a Chemisorbed Diastereomeric α‐Ketoester/1‐(1‐Naphthyl)ethylamine Complex
Scanning tunneling microscopy (STM) data for α‐ketoester/1‐(1‐naphthyl)ethylamine complexes on Pt(111) reveal a tumbling motion that couples two neighboring binding states. The interconversion, resulting in prochiral inversion of the α‐ketoester, occurs in single complexes without breaking them apart. This is a surprising observation because the overall motion requires rotation of the α‐ketoester away from the surface without branching exclusively into diffusion away from the complex or desorption. The multi‐step interconversion is rationalized in terms of sequences of bound states that combine transient H‐bond interactions with the chiral molecule and weakened adsorption interactions with the metal. The observation of tumbling in single long‐lived complexes is of relevance to self‐assembly and directed molecular motion on surfaces, to ligand‐controlled surface reactions, and most directly to stereocontrol in asymmetric heterogeneous catalysis.
- 29 September 2022
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 61 (44) , e202210076
Substrate Tumbling in a Chemisorbed Diastereomeric α‐Ketoester/1‐(1‐Naphthyl)ethylamine Complex
Scanning tunneling microscopy (STM) data for α‐ketoester/1‐(1‐naphthyl)ethylamine complexes on Pt(111) reveal a tumbling motion that couples two neighboring binding states. The interconversion, resulting in prochiral inversion of the α‐ketoester, occurs in single complexes without breaking them apart. This is a surprising observation because the overall motion requires rotation of the α‐ketoester away from the surface without branching exclusively into diffusion away from the complex or desorption. The multi‐step interconversion is rationalized in terms of sequences of bound states that combine transient H‐bond interactions with the chiral molecule and weakened adsorption interactions with the metal. The observation of tumbling in single long‐lived complexes is of relevance to self‐assembly and directed molecular motion on surfaces, to ligand‐controlled surface reactions, and most directly to stereocontrol in asymmetric heterogeneous catalysis.
- 23 September 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (19) , 12186-12194
Ligand-Assisted Carbonyl Bond Activation in Single Diastereomeric Complexes on Platinum
- 23 September 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (19) , 12186-12194
Ligand-Assisted Carbonyl Bond Activation in Single Diastereomeric Complexes on Platinum