Markus Heyde
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Markus Heyde has a total of 253 co-authors. Here are the top co-authors by number of shared publications:
- Hans-Joachim Freund
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Berlin, Germany
28 shared publications - Gianfranco Pacchioni
Dipartimento Di Scienza dei Materiali Università Milano‐Bicocca Milano Italy
23 shared publications Hans-Joachim Freund
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin, Germany
23 shared publications- Christin Büchner
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin, Germany
22 shared publications H.-J. Freund
Fritz-Haber-Institut der Max-Planck-Gesellschaft, Faradayweg 4-6, 14195 Berlin, Germany
20 shared publications- Martin Sterrer
University of Graz
18 shared publications
Latest Publications
- Open Access
- 7 October 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (61) , e02669
Low‐ Temperature Transformations in Amorphous Silica Bilayers on Ru(0001) After Crystal‐Glass Transition: Closer Look
The crystal‐glass transition concerning silicon dioxide has been a topic of intense research. It has been possible to prepare a bilayer silica film on a metal substrate and study the corresponding transition in real space using scanning tunneling microscopy (STM). While the initial trigger of the transition has been identified as a so‐called Stone–Wales ring‐opening process, which requires rather high energies/temperatures, a question has been, whether there are similar follow‐up processes, which require much less energy and thus rather moderate temperatures. Although observations have been reported using electron microscopy, it remains unclear whether, in this case, the modifications were initiated by the measurement itself. Here, we report on a fast‐scanning STM study, allowing a study in real space and indicating structural transformations at room temperature. The experimental results are supported by demanding density functional calculations, which allow for an understanding of the involved ring structure modifying processes. The calculations also reveal the influence of the metal support on the transformation energetics.
- 7 October 2025
- Published by Wiley in Chemistry – A European Journal
- Vol. 31 (61) , e02669
Open AccessLow‐ Temperature Transformations in Amorphous Silica Bilayers on Ru(0001) After Crystal‐Glass Transition: Closer Look
The crystal‐glass transition concerning silicon dioxide has been a topic of intense research. It has been possible to prepare a bilayer silica film on a metal substrate and study the corresponding transition in real space using scanning tunneling microscopy (STM). While the initial trigger of the transition has been identified as a so‐called Stone–Wales ring‐opening process, which requires rather high energies/temperatures, a question has been, whether there are similar follow‐up processes, which require much less energy and thus rather moderate temperatures. Although observations have been reported using electron microscopy, it remains unclear whether, in this case, the modifications were initiated by the measurement itself. Here, we report on a fast‐scanning STM study, allowing a study in real space and indicating structural transformations at room temperature. The experimental results are supported by demanding density functional calculations, which allow for an understanding of the involved ring structure modifying processes. The calculations also reveal the influence of the metal support on the transformation energetics.
- Open Access
- 23 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27676-27684
Writing with Molecules: Tip-Induced Local Chemisorption of N-Heterocyclic Olefins on Cu(111)
N-Heterocyclic olefins (NHOs), possessing highly polarizable electron-rich double bonds, have recently received increased attention as promising ligands to modify the properties of various surfaces such as Cu, Au, and Si. This work demonstrates the precise "writing" of molecules on a Cu(111) surface by using the electric field of a scanning tunneling microscope (STM) tip. This selectively switches the molecules from a mobile, physisorbed state to a chemisorbed state with molecular, nanoscale spatial resolution under ultrahigh vacuum conditions. We utilize STM and high-resolution electron energy-loss spectroscopy supported by density-functional theory to investigate adsorption and orientation of the molecules on the Cu(111) surface. We find that IPr-NHO adopts two distinct adsorption states on Cu(111): a mobile, physisorbed state and a chemisorbed state. We can distinguish between the two states using X-ray photoelectron spectroscopy and show that the mobile species can be transformed into the immobile species via interaction with the STM tip with molecular precision. This enables "writing" of IPr-NHO on Cu(111) as the molecules can be chemisorbed in a predefined assembly in intentionally designed shapes, opening new possibilities for nanofabrication, molecular electronics, and tunable surface chemistry.
- 23 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (31) , 27676-27684
Open AccessWriting with Molecules: Tip-Induced Local Chemisorption of N-Heterocyclic Olefins on Cu(111)
N-Heterocyclic olefins (NHOs), possessing highly polarizable electron-rich double bonds, have recently received increased attention as promising ligands to modify the properties of various surfaces such as Cu, Au, and Si. This work demonstrates the precise "writing" of molecules on a Cu(111) surface by using the electric field of a scanning tunneling microscope (STM) tip. This selectively switches the molecules from a mobile, physisorbed state to a chemisorbed state with molecular, nanoscale spatial resolution under ultrahigh vacuum conditions. We utilize STM and high-resolution electron energy-loss spectroscopy supported by density-functional theory to investigate adsorption and orientation of the molecules on the Cu(111) surface. We find that IPr-NHO adopts two distinct adsorption states on Cu(111): a mobile, physisorbed state and a chemisorbed state. We can distinguish between the two states using X-ray photoelectron spectroscopy and show that the mobile species can be transformed into the immobile species via interaction with the STM tip with molecular precision. This enables "writing" of IPr-NHO on Cu(111) as the molecules can be chemisorbed in a predefined assembly in intentionally designed shapes, opening new possibilities for nanofabrication, molecular electronics, and tunable surface chemistry.
- 16 May 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (20)
Helium atom scattering investigation of the boson peak presence in amorphous and crystalline two-dimensional materials
- 16 May 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (20)
Helium atom scattering investigation of the boson peak presence in amorphous and crystalline two-dimensional materials
- Top Cited PapersOpen Access
- 30 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-14
Structure Sensitivity and Catalyst Restructuring for CO2 Electro-reduction on Copper
Cu is the most promising metal catalyst for CO2 electroreduction (CO2RR) to multi-carbon products, yet the structure sensitivity of the reaction and the stability versus restructuring of the catalyst surface under reaction conditions remain controversial. Here, atomic scale simulations of surface energies and reaction pathway kinetics supported by experimental evidence unveil that CO2RR does not take place on perfect planar Cu(111) and Cu(100) surfaces but rather on steps or kinks. These planar surfaces tend to restructure in reaction conditions to the active stepped surfaces, with the strong binding of CO on defective sites acting as a thermodynamic driving force. Notably, we identify that the square motifs adjacent to defects, not the defects themselves, as the active sites for CO2RR via synergistic effect. We evaluate these mechanisms against experiments of CO2RR on ultra-high vacuum-prepared ultraclean Cu surfaces, uncovering the crucial role of step-edge orientation in steering selectivity. Overall, our study refines the structural sensitivity of CO2RR on Cu at the atomic level, highlights the self-activation mechanism and elucidates the origin of in situ restructuring of Cu surfaces during the reaction.
- 30 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-14
Top Cited PapersOpen AccessStructure Sensitivity and Catalyst Restructuring for CO2 Electro-reduction on Copper
Cu is the most promising metal catalyst for CO2 electroreduction (CO2RR) to multi-carbon products, yet the structure sensitivity of the reaction and the stability versus restructuring of the catalyst surface under reaction conditions remain controversial. Here, atomic scale simulations of surface energies and reaction pathway kinetics supported by experimental evidence unveil that CO2RR does not take place on perfect planar Cu(111) and Cu(100) surfaces but rather on steps or kinks. These planar surfaces tend to restructure in reaction conditions to the active stepped surfaces, with the strong binding of CO on defective sites acting as a thermodynamic driving force. Notably, we identify that the square motifs adjacent to defects, not the defects themselves, as the active sites for CO2RR via synergistic effect. We evaluate these mechanisms against experiments of CO2RR on ultra-high vacuum-prepared ultraclean Cu surfaces, uncovering the crucial role of step-edge orientation in steering selectivity. Overall, our study refines the structural sensitivity of CO2RR on Cu at the atomic level, highlights the self-activation mechanism and elucidates the origin of in situ restructuring of Cu surfaces during the reaction.
- Open Access
- 5 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Structure Sensitivity and Catalyst Restructuring for CO2 Electro-reduction on Copper
Cu is the most promising metal catalyst for CO2 electroreduction (CO2RR) to multi-carbon products, but the structure sensitivity of the reaction and the stability versus restructuring of the catalyst surface under reaction conditions are still controversial. Here, atomic scale simulations of surface energies and reaction pathway kinetics supported by experimental evidence unveil that CO2RR does not take place on perfect planar Cu(111) and Cu(100) surfaces but rather on steps or kinks defects, and that these planar surfaces tend to restructure in reaction conditions to the active stepped surfaces. By combining basin hopping global sampling and grand canonical density functional theory, we show that the extremely low CO coverage on (111) and (100) surfaces, originating from sluggish CO2 conversion and unfavorable CO binding, limits the ability of these surfaces to reduce CO2 to multi-carbon products. Steps and kinks at surfaces, despite the lack of decrease in C-C coupling barriers on these sites, exhibit a significant increase in activity arising from beneficial CO2 activation and higher CO coverage. Notably, the square motifs adjacent to defects, not the defects themselves, are the active sites for CO2RR via synergistic effect. In addition, the strong binding of CO on defective sites acts as a thermodynamic driving force for the restructuring of planar surfaces to active stepped terminations under reactive conditions. We evaluate these mechanisms against experiments of CO2RR on UHV-prepared ultraclean Cu surfaces. Overall, our findings highlight the structural sensitivity in steering CO2RR and elucidate the origin of in situ restructuring of Cu catalysts during the reaction. We furthermore feature that the active sites for CO2RR are created under reaction conditions.
- 5 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessStructure Sensitivity and Catalyst Restructuring for CO2 Electro-reduction on Copper
Cu is the most promising metal catalyst for CO2 electroreduction (CO2RR) to multi-carbon products, but the structure sensitivity of the reaction and the stability versus restructuring of the catalyst surface under reaction conditions are still controversial. Here, atomic scale simulations of surface energies and reaction pathway kinetics supported by experimental evidence unveil that CO2RR does not take place on perfect planar Cu(111) and Cu(100) surfaces but rather on steps or kinks defects, and that these planar surfaces tend to restructure in reaction conditions to the active stepped surfaces. By combining basin hopping global sampling and grand canonical density functional theory, we show that the extremely low CO coverage on (111) and (100) surfaces, originating from sluggish CO2 conversion and unfavorable CO binding, limits the ability of these surfaces to reduce CO2 to multi-carbon products. Steps and kinks at surfaces, despite the lack of decrease in C-C coupling barriers on these sites, exhibit a significant increase in activity arising from beneficial CO2 activation and higher CO coverage. Notably, the square motifs adjacent to defects, not the defects themselves, are the active sites for CO2RR via synergistic effect. In addition, the strong binding of CO on defective sites acts as a thermodynamic driving force for the restructuring of planar surfaces to active stepped terminations under reactive conditions. We evaluate these mechanisms against experiments of CO2RR on UHV-prepared ultraclean Cu surfaces. Overall, our findings highlight the structural sensitivity in steering CO2RR and elucidate the origin of in situ restructuring of Cu catalysts during the reaction. We furthermore feature that the active sites for CO2RR are created under reaction conditions.
- Open Access
- 10 June 2024
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (31)
N‐Heterocyclic Olefins on a Metallic Surface – Adsorption, Orientation, and Electronic Influence
N‐Heterocyclic olefins (NHOs), possessing highly polarizable and remarkably electron‐rich double bonds, have been effectively utilized as exceptional anchors for surface modifications. Herein, the adsorption, orientation, and electronic properties of NHOs on a metal surface are investigated. On Cu(111), the sterically low‐demanding IMe‐NHO is compared to its analogous IMe‐NHC counterpart. High‐resolution electron energy‐loss spectroscopy (HREELS) measurements show for both molecules a flat‐lying ring adsorption configuration. While the NHC adopts a dimer configuration including a Cu adatom, the NHO chemisorbs over a C–Cu bond perpendicular to the surface. This distinct difference leads for the IMe‐NHOs to have a higher thermal stability on the surface. Moreover, IMe‐NHOs introduce a higher net electron transfer to the surface compared to the IMe‐NHCs, which results in a stronger effect on the work function. These results highlight the role of NHOs in surface science as they extend the functionalization capabilities of NHCs into stronger electronic modification.
- 10 June 2024
- Published by Wiley in Advanced Materials Interfaces
- Vol. 11 (31)
Open AccessN‐Heterocyclic Olefins on a Metallic Surface – Adsorption, Orientation, and Electronic Influence
N‐Heterocyclic olefins (NHOs), possessing highly polarizable and remarkably electron‐rich double bonds, have been effectively utilized as exceptional anchors for surface modifications. Herein, the adsorption, orientation, and electronic properties of NHOs on a metal surface are investigated. On Cu(111), the sterically low‐demanding IMe‐NHO is compared to its analogous IMe‐NHC counterpart. High‐resolution electron energy‐loss spectroscopy (HREELS) measurements show for both molecules a flat‐lying ring adsorption configuration. While the NHC adopts a dimer configuration including a Cu adatom, the NHO chemisorbs over a C–Cu bond perpendicular to the surface. This distinct difference leads for the IMe‐NHOs to have a higher thermal stability on the surface. Moreover, IMe‐NHOs introduce a higher net electron transfer to the surface compared to the IMe‐NHCs, which results in a stronger effect on the work function. These results highlight the role of NHOs in surface science as they extend the functionalization capabilities of NHCs into stronger electronic modification.
- Open Access
- 29 January 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (2) , 644-652
The Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals
The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.
- 29 January 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (2) , 644-652
Open AccessThe Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals
The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.
- Open Access
- 6 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (21)
The real honeycomb structure—From the macroscopic down to the atomic scale
The honeycomb’s eponymous structure is omnipresent in our every day lives. We want to provide some inspiration to perform structural analyses of these structures and to draw comparisons between them. In the present study, we detect honeycomb patterns and related complex network structures on different length scales ranging from macroscopic objects down to the atomic scale of 2D materials. In 2D materials, a subset of the honeycomb structure—the kagome lattice—is very interesting due to unique material properties. For structure detection, we developed a program written in Python. The program is very adaptable and provides a graphical user interface to modify the detected network interactively. With the help of this program, we directly compare honeycomb structures with atomic network structures. Both honeycombs and 2D atom networks can show local deviations from their characteristic hexagonal pattern. The structural deviations at the macroscopic scale and at the atomic scale are very similar. We provide additional structural analyses of every day objects and encourage everyone to use our software that is freely accessible.
- 6 June 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (21)
Open AccessThe real honeycomb structure—From the macroscopic down to the atomic scale
The honeycomb’s eponymous structure is omnipresent in our every day lives. We want to provide some inspiration to perform structural analyses of these structures and to draw comparisons between them. In the present study, we detect honeycomb patterns and related complex network structures on different length scales ranging from macroscopic objects down to the atomic scale of 2D materials. In 2D materials, a subset of the honeycomb structure—the kagome lattice—is very interesting due to unique material properties. For structure detection, we developed a program written in Python. The program is very adaptable and provides a graphical user interface to modify the detected network interactively. With the help of this program, we directly compare honeycomb structures with atomic network structures. Both honeycombs and 2D atom networks can show local deviations from their characteristic hexagonal pattern. The structural deviations at the macroscopic scale and at the atomic scale are very similar. We provide additional structural analyses of every day objects and encourage everyone to use our software that is freely accessible.
- Open Access
- 28 November 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 24 (48) , 29721-29730
Structure and registry of the silica bilayer film on Ru(0001) as viewed by LEED and DFT
Structure and registry of the silica bilayer film with respect to its supporting metal substrate revealed by low energy electron diffraction.
- 28 November 2022
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 24 (48) , 29721-29730
Open AccessStructure and registry of the silica bilayer film on Ru(0001) as viewed by LEED and DFT
Structure and registry of the silica bilayer film with respect to its supporting metal substrate revealed by low energy electron diffraction.
- Open Access
- 6 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (41) , 17528-17535
Promoted Thermal Reduction of Copper Oxide Surfaces by N-Heterocyclic Carbenes
- 6 October 2022
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 126 (41) , 17528-17535
Open AccessPromoted Thermal Reduction of Copper Oxide Surfaces by N-Heterocyclic Carbenes