HJHedi Jedli

Hedi Jedli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hedi Jedli has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • Khalifa Slimi

    Civil and Architectural Engineering Department, College of Engineering and Computer Sciences, Jazan University, Jazan, Saudi Arabia

    12 shared publications
  • Ehab Sabi

    Civil and Architectural Engineering Department, College of Engineering and Computer Sciences, Jazan University, Jazan, Saudi Arabia

    9 shared publications
  • Rym Hassani

    Environment and Nature Research Centre, Jazan University, Jazan, Saudi Arabia

    9 shared publications
  • Souhail Mohammed Bouzgarrou

    Civil and Architectural Engineering Department, College of Engineering and Computer Sciences, Jazan University, Jazan, Saudi Arabia

    4 shared publications
  • Abdessalem Jbara

    University of Sousse, Higher Institute of Transportation and Logistics, PO Box 247, Riyadh City, 4023, Sousse, Tunisia

    3 shared publications
  • Afzal Husain Khan

    Civil and Architectural Engineering Department, College of Engineering and Computer Sciences, Jazan University, Jazan, Saudi Arabia

    2 shared publications

Latest Publications

  • Open Access

    Insights into CO₂ adsorption on zeolite ZSM-5: an experimental and advanced modeling approach

    by Souhail Mohammed Bouzgarrou, Hedi Jedli, Rym Hassani, Ehab Sabi, Leila Jamel, Ibrahim Mahariq, Khalifa Slimi

  • Open Access

    Adsorption mechanisms of methylene blue and methyl orange on activated carbon: scientific interpretation and modeling simulation

    by Hedi Jedli, Souhail Mohammed Bouzgarrou, Rym Hassani, Ehab Sabi, Leila Jamel, Khalifa Slimi

    Activated carbon was produced from olive waste to investigate the adsorption behavior of methylene blue (MB) and methyl orange (MO) dyes in aqueous solutions. The adsorbent was characterized using X-ray diffraction and scanning electron microscopy, and adsorption isotherms were measured at three different temperatures. A statistical physics framework was employed to analyze the adsorption mechanisms of the dyes on the carbon surface. The steric, energetic, and thermodynamic characteristics of the most relevant advanced were analyzed in detail. The number of active sites for MB was determined to range from 1.32 to 1.78, while for MO it ranged from 1.23 to 1.62, indicating that the orientation of dye molecules on the adsorbent is influenced by temperature. Overall, MB shows a slightly higher adsorption capacity than MO. Moreover, increasing the temperature reduces adsorption, indicating that the process is exothermic for both dyes. Moreover, adsorption energy values ranging from 9.85 to 18.90 kJ/mol indicate that physical interactions are responsible for the adsorption process. Thermodynamic characteristics demonstrated that deyes adsorption onto the AC adsorbent is spontaneous and feasible.


  • Open Access

    Adsorption of methylene blue onto clay: experiments and statistical physics interpretation

    by Hedi Jedli, Souhail Mohammed Bouzgarrou, Rym Hassani, Ehab Sabi, Khalifa Slimi

    This study explored the adsorption of methylene blue (MB) from aqueous solutions using natural clay as an adsorbent. The effects of contact time, initial dye concentration, adsorbent dosage, and pH were systematically evaluated. Analysis of correlation coefficients (R2) for the kinetic and isotherm models indicated that the adsorption kinetics follow a pseudo-first-order model, while the Langmuir isotherm provided the best fit to the experimental data at 303, 313, and 323 K. To further elucidate the adsorption mechanism, a generalized model based on statistical physics was applied. Steric analysis examined the number of dye molecules bound per active site, the estimated number of layers formed, receptor site density, and overall adsorption capacity. This model also yielded two adsorption energies associated with MB-clay and MB-MB interactions, ranging from 29.845 to 31.191 kJ/mol and from 21.981 to 24.692 kJ/mol, respectively. Thermodynamic parameters confirmed that MB adsorption is spontaneous under all studied conditions. Overall, these results highlight natural clay as a cost-effective and efficient adsorbent for removing dyes from aqueous solutions.


  • Open Access

    Experiments and physical Investigation on the adsorption of methylene on activated carbon

    by Souhail Mohammed Bouzgarrou, Hedi Jedli, Rym Hassani, Ehab Sabi, Afzal Husain Khan, Khalifa Slimi

    In this study, activated carbon (AC) derived from olive waste was employed as an alternative adsorbent for the removal of methylene blue (MB) from aqueous solutions. The AC was characterized using FTIR, SEM, XRD and N₂ adsorption–desorption analyses. The pseudo-second-order kinetic model and the Langmuir adsorption isotherm provided a good fit to the experimental data at 298, 303, and 313 K. A multilayer adsorption model was applied to elucidate the adsorption mechanisms between the dye molecules and the adsorbent. The number of MB active sites (n) was greater than unity at all temperatures, indicating a vertical orientation of the adsorbed molecules. The number of active sites (Dm) showed only slight variation with temperature. The decrease in MB adsorption capacities (Qm) from 235.21 to 198.62 mg·g⁻1 over the temperature range of 298–313 K was primarily influenced by the n parameter. Adsorption energy analysis revealed that MB adsorption was exothermic and occurred via a physisorption process. This study provides valuable insights into the interactions between MB molecules and AC active sites.


  • Open Access

    CO 2 Adsorption on Mesoporous Silica Using Response Surface Methodology (RSM)

    by Hedi Jedli, Souhail Mohammed Bouzgarrou, Rym Hassani, Ehab Sabi, Khalifa Slimi

    The aim of the current study is to investigate the CO 2 adsorption on the mesoporous silica. The adsorbent was characterized by XRD, TEM, SEM, and N2 adsorption desorption. The adsorption isotherms of carbon dioxide (CO 2 ) on the silica were investigated using a static volumetric method at various temperatures. The response surface methodology (RSM) was applied to the influence of different variables and their interaction on the response (CO 2 adsorption capacity) in order to obtain the optimal conditions. According to the analysis of variance, the pressure and the temperature parameters are the variables that influence the CO 2 adsorption capacity. Freundlich, Langmuir, and Langmuir–Freundlich (L‐F) models were used to depict the isothermal data, and the L‐F model exhibited the best correlation with the experimental isotherm. In addition, the temperature‐dependent L‐F model was applied to adjust the CO 2 adsorption data on the adsorbent, and the isosteric heat of CO 2 was calculated. Additionally, compared with other samples, the mesoporous silica demonstrated superior regenerability and thermal stability.


  • Open Access

    Investigation of the CO2 adsorption isotherms on activated carbon by statistical physics treatment

    by Souhail Mohammed Bouzgarrou, Hedi Jedli, Rym Hassani, Ehab Sabi, Afzal Husain Khan, Khalifa Slimi

    The aim of this paper was to study CO2 adsorption on the activated carbon (AC) prepared from olive waste. The AC was characterized via X-ray diffraction, Scanning Electron Microscopy (SEM) and N2 adsorption-desorption. The adsorption isotherms were measured at various temperatures, namely, 298 K, 308 K, and 318 K. Based on the experimental result, a new model was generated and evaluated by means of a multilayer model with saturation. The physicochemical properties that characterize the CO2 adsorption mechanism have been established using a physical statistical approach. The parameters which characterize the CO2 adsorption isotherm, such as the number of carbon dioxide molecules per site (n), the receptor site densities \(\:\left({D}_{m}\right)\:\), and the energetic parameters (ΔE1, ΔE2) were studied. In addition, thermodynamic functions such as internal energy (Eint) and Gibbs free energy (G), were established using a physics model. Thus, the obtained results indicated that the CO2 adsorption on the AC was exothermic and physisorption in nature. Furthermore, the results achieved with this model can be used to design and optimize an adsorption unit for CO2 capture.


  • Experimental Studies and Equilibrium Modeling on the Adsorption of CO 2 by ZSM‐5 Zeolite and Activated Carbon

    by Hedi Jedli, Souhail Mohammed Bouzgarrou, Rym Hassani, Ehab Sabi, Khalifa Slimi

    The objective of our paper is to compare the CO 2 adsorption and the kinetic studies of ZSM‐5 zeolite and activated carbon (AC). Both adsorbents were described with N 2 adsorption–desorption isotherm, scanning electron microscopy (SEM), and X‐ray diffraction (XRD). The CO 2 adsorption isotherms were collected at different temperatures over a wide range of pressures and modeled with the Langmuir and Freundlich models. The characterization results showed that AC exhibited larger total pore volume, higher BET surface area, and higher crystallinity in comparison with the ZSM‐5 zeolite. The results showed that the quantities of CO 2 adsorbed on the AC were greater than on ZSM‐5, since AC exhibits more important textural parameters than zeolite. Furthermore, the Langmuir model provides the perfect adjustment to the experiments, with a correlation coefficient ( R 2 ) of 0.99. The CO 2 adsorption kinetics can be depicted by the linear driving force (LDF) model. With rising temperature, the mass transfer constants of CO 2 adsorption on the two adsorbents rise. With increasing pressure, the adsorption activation energy Ea for CO 2 on both adsorbents is reduced. Moreover, the of AC was higher than that of zeolite ZSM‐5 at low pressure. The findings can be integrated into the adsorption system for removing CO 2 from the gases.

  • Open Access

    Adsorption of CO2, CH4 and H2 onto zeolite 13 X: Kinetic and equilibrium studies

    by Hedi Jedli, Souhail Mohammed Bouzgarrou, Rym Hassani, Ehab Sabi, Khalifa Slimi


  • Open Access

    Activated Carbon as an Adsorbent for CO2 Capture: Adsorption, Kinetics, and RSM Modeling

    by Hedi Jedli, Maha Almonnef, Raja Rabhi, Mohamed Mbarek, Jbara Abdessalem, Khalifa Slimi

    The main objective of this research is to investigate the adsorption isotherms and the optimization of the carbon dioxide (CO2) adsorption process on activated carbon (AC). The AC has been characterized by X-ray diffraction, scanning electron microscopy, and nitrogen (N2) adsorption-desorption. The CO2 isotherms measured under three adsorption temperatures (318, 308, and 298 K) were investigated by the Langmuir and linear driving force model. It is found that the Langmuir model could well predict the adsorption behavior of AC with a correlation factor of about 0.99. The kinetic model shows that the amount of CO2 increases at higher pressures. The response surface methodology (RSM) was applied to investigate the effects of process variables and their interaction on the response to reach the optimal conditions. Based on the analysis of variance, pressure and temperature are the main factors influencing the CO2 adsorption capacity. The effective parameters obtained through this model are found to have a value of p < 0.05. In addition, a semiempirical correlation was developed under the optimal operating conditions which are 25 °C and 9 bar. The results indicated that RSM models provide an effective method for evaluating CO2 adsorption. These results point that AC is a potential adsorbent for CO2 capture.