Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Soo-Ho Chang has a total of 84 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Model Performance Improvement by Accumulated Application of Machine Data in Machine Learning Model for TBM Advance Rate Prediction

    by Soon-Wook Choi, Tae-Ho Kang, Soo-Ho Chang

    This study quantitatively verified the impact of applying accumulated data on the model’s prediction accuracy, overfitting, and adaptive learning ability by using a method that accumulates and retrains machine data of a TBM generated whenever excavation progresses at regular intervals. To achieve this, the performance of five machine learning algorithms was evaluated on two field datasets. The best-performing gradient boosting model was selected as the preliminary model. The performance results of the preliminary model and the cumulative model were then compared using another field dataset. The field data for the performance comparison were divided into 14 steps based on ground information, and the performance of the two models was compared sequentially at each step. The results showed that the preliminary and cumulative models exhibited similar predictive performance in the initial intervals. However, the cumulative model more closely matched actual measurements as new data was added than the preliminary model. Consequently, the preliminary model, based on past data, has clear limitations in adapting to the diverse variables encountered in real-world situations. On the other hand, cumulative models are essential for improving real-time prediction performance of processes with constantly changing environments, such as TBM, by continuously increasing relevant field data.


  • Open Access

    A Geometric Model for a Shield TBM Steering Simulator

    by Byungkwan Park, Soon-Wook Choi, Chulho Lee, Tae-Ho Kang, Seungchul Do, Woon-Yong Lee, Soo-Ho Chang

    This study aimed to simulate curved excavation using a tunnel boring machine (TBM) steering system based on the proposed mathematical methodology applied in a TBM simulator. We introduce the concept and mechanism of the TBM steering system and describe the mathematical formulae used for simulating curved excavation. Curved excavation in the top- right direction was simulated using a Python program to verify the mathematical formulae. In addition, Python simulations were undertaken to determine the effects of horizontal and vertical articulation angles on pitching and yawing angles. Finally, the proposed mathematical formulae were applied in the TBM operation simulator, and tested based on the mechanism of the TBM steering system.


  • Open Access

    Soil Classification by Machine Learning Using a Tunnel Boring Machine’s Operating Parameters

    by Tae-Ho Kang, Soon-Wook Choi, Chulho Lee, Soo-Ho Chang

    This study predicted soil classification using data gathered during the operation of an earth-pressure-balance-type tunnel boring machine (TBM). The prediction methodology used machine learning to find relationships between the TBM’s operating parameters which are monitored continuously during excavation, and the engineering characteristics of the ground which are only available from prior geotechnical investigation. Classification criteria were set using the No. 200 sieve pass rate and N-value and employed classification algorithms that used data for six operating parameters (penetration rate, thrust force, cutterhead torque, screw torque, screw revolution speed, and earth pressure). The results of the ensemble model (i.e., AdaBoost, gradient boosting, XG boosting, and Light GBM), decision tree, and SVM model were examined. As a result, the decision tree and AdaBoost models showed accuracy values of 0.759 to 0.879 in the first and second classification steps, but with poor precision and recall values of around 0.6. In contrast, the gradient boosting, XG boosting, Light GBM, and support vector models all showed excellent performance, with accuracy values over 0.90, and strong precision and recall values. Comparing the performance and the speed of learning using the same PC found Light GBM which showed both excellent learning performance and speed to be a suitable model for predicting soil classification using TBM operating data. The classification model developed here is expected to help guide excavation in sections of ground that lack prior geotechnical information.


  • Open Access

    An Operating Model for an EPB Shield TBM Simulator by the Correlation Analysis of Operational Actions and Mechanical Responses

    by Byungkwan Park, Soon-Wook Choi, Chulho Lee, Tae-Ho Kang, Seungchul Do, Woon-Yong Lee, Soo-Ho Chang

    This study reports on the development of an operating model for an EPB Shield TBM simulator by the correlation between operating parameters. First, four main operating parameters required for excavation are analyzed, then multiple regression analysis estimates their requirements depending on the ground conditions and the TBM’s specifications. Further multiple regression analysis then determines the interactions between six operational actions and ten mechanical responses. Operating procedures are established, and interlock and warning alarm systems are designed for use in the operating model. Lastly, several simulations were tested for the operating model of the TBM simulator under various conditions.


  • Open Access

    Discrete-Element Analysis of the Excavation Performance of an EPB Shield TBM under Different Operating Conditions

    by Byungkwan Park, Chulho Lee, Soon-Wook Choi, Tae-Ho Kang, Soo-Ho Chang

    This study used a discrete-element analysis to predict the excavation performance of a 7.73 m-diameter earth pressure balance (EPB) shield tunnel boring machine (TBM). The simulation mainly predicted several excavation performance indicators for the machine, under different operating conditions. The number of particles in the chamber and the chamber pressure varied, as the operating conditions changed during the simulated TBM excavation. The results showed that the compressive force, torque, and driving power acting on the TBM cutterhead varied with its rotation speed, increasing as the cutterhead rotation speed rose. The overall compressive force acting on all of the disc cutters and their impact wear increased linearly as the cutterhead rotation accelerated. The position of a disc cutter on the cutterhead had a particularly strong influence, with higher compressive forces experienced by the cutters closer to the center. In contrast, the gauge disc cutters at the transition zone of the cutterhead showed more wear than those elsewhere. The muck discharge rate and the driving power of the screw conveyor rose with increasing screw conveyor and cutterhead rotation speeds. Finally, this study suggests optimal operation conditions, based on pressure balance and operational management of the TBM.


  • Open Access

    Numerical Simulation of EPB Shield Tunnelling with TBM Operational Condition Control Using Coupled DEM–FDM

    by Hyobum Lee, Hangseok Choi, Soon-Wook Choi, Soo-Ho Chang, Tae-Ho Kang, Chulho Lee

    This study demonstrates a three-dimensional numerical simulation of earth pressure balance (EPB) shield tunnelling using a coupled discrete element method (DEM) and a finite difference method (FDM). The analysis adopted the actual size of a spoke-type EPB shield tunnel boring machine (TBM) consisting of a cutter head with cutting tools, working chamber, screw conveyor, and shield. For the coupled model to reproduce the in situ ground condition, the ground formation was generated partially using the DEM (for the limited domain influenced by excavation), with the rest of the domain being composed of FDM grids. In the DEM domain, contact parameters of particles were calibrated via a series of large-scale triaxial test analyses. The model simulated tunnelling as the TBM operational conditions were controlled. The penetration rate and the rotational speed of the screw conveyor were automatically adjusted as the TBM advanced to prevent the generation of excessive or insufficient torque, thrust force, or chamber pressure. Accordingly, these parameters were maintained consistently around their set operational ranges during excavation. The simulation results show that the proposed numerical model based on DEM–FDM coupling could reasonably simulate EPB driving while considering the TBM operational conditions.


  • Open Access

    Numerical Analysis of the Contact Behavior of a Polymer-Based Waterproof Membrane for Tunnel Lining

    by Kicheol Lee, Dongwook Kim, Soon-Wook Choi, Soo-Ho Chang, Tae-Ho Kang, Chulho Lee

    Waterproof membranes have higher initial strength, faster construction, and better waterproofing than conventional sheet membranes. In addition, their polymer constituents have much higher interfacial adhesion and tensile strength than those of conventional materials. However, despite their advantages, waterproof membranes are not widely used in civil construction. This study evaluates the material properties and interface parameters of a waterproof membrane by considering the results of laboratory experiments and numerical analysis. Since the contact behavior of a membrane at its interface with shotcrete is important for understanding the mechanism of the support it offers known as a shotcrete tunnel lining, modeling should adopt appropriate contact conditions. The numerical analysis identifies the suitability and contact conditions of the waterproof membrane in various conditions.


  • Numerical analysis on performance of EPB shield TBM by discrete element method

    by B. Park, S.H. Chang, S.W. Choi, C. Lee, T.H. Kang

    The Discrete Element Method (DEM) has been widely used in civil engineering as well as various industrial fields to simulate granular materials. In this study, DEM was used to predict the performance of the earth pressure balance (EPB) shield TBM (Tunnel Boring Machine). For the analysis, EPB shield TBM with the diameter of 7.73 m was selected, having used previously for an excavation of the metro tunnel in Seoul. First, the ground modeling was conducted based on the result of the direct shear test simulation. Next, TBM 3D modeling composed of five parts (cutting tools, cutterhead, chamber, shield and screw auger) was carried out. Then, TBM excavation analysis will be performed. After that, the excavation performance indicators, such as cutter force at the cutterhead, thrust force, resistant torque will be estimated. Finally, we will compare the performance indicators obtained from numerical analysis with the maximum capacity of the real TBM design parameters selected for the numerical analysis.


  • Numerical modelling for design of composite concrete lining with sprayed waterproofing membrane in tunnel

    by C. Lee, S.H. Chang, S.W. Choi, K. Lee, D. Kim, B. Park

    A sprayed waterproofing membrane whose base material is a polymer has a higher initial strength and faster construction time than conventional sheet-type waterproofing materials. Because of its high physical properties, such as adhesion and tensile strength, the shotcrete or concrete reinforced with waterproofing membrane shows as composite materials. In this study, to consider an application to the conventional design method, the numerical method was used. In the numerical analysis, material and contact properties were adopt from previous studies. Because the contact properties between membrane and other supporting materials at the interface is important parameter to understand the supporting mechanism of the sprayed waterproofing membrane, contact properties were mainly considered at the interface. In addition, the conventional design method for the tunnel lining, was reviewed with numerical results.