Yuan Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yuan Chen has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Gaiyun Li
6 shared publicationsDongbin Fan
4 shared publications- Dongbin Fan
Research Institute of Wood Industry
4 shared publications - Feng Jiang
University of British Columbia
2 shared publications - Gaiyun Li
Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing, China
2 shared publications - Shaoyi Lyu
Research Institute of Wood Industry, Chinese Academy of Forestry, Beijing 100091, China
2 shared publications
Latest Publications
- Open Access
- 19 December 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 239
Accelerated oxidation enhances aroma quality in fresh Chi-Nan agarwood oil by sesquiterpene modulation
- 19 December 2025
- Published by Elsevier in Industrial Crops and Products
- Vol. 239
Open AccessAccelerated oxidation enhances aroma quality in fresh Chi-Nan agarwood oil by sesquiterpene modulation
- 11 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (50) , 21568-21578
Citric Acid-Mediated Lignocellulosic Fiber Bonding for Sustainable Materials: Multiscale Insights into Molecular Cross-Linking and Physical Interlocking
- 11 December 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (50) , 21568-21578
Citric Acid-Mediated Lignocellulosic Fiber Bonding for Sustainable Materials: Multiscale Insights into Molecular Cross-Linking and Physical Interlocking
- 11 November 2022
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 10 (47) , 15538-15549
High-Performance Lignocellulosic Self-Bonding Composites via Dialdehyde Modification and Water-Involved Low-Temperature Hot Pressing
- 11 November 2022
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 10 (47) , 15538-15549
High-Performance Lignocellulosic Self-Bonding Composites via Dialdehyde Modification and Water-Involved Low-Temperature Hot Pressing
- 14 April 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (34) , 50859
Preparation and structural control of polyphenylene sulfide porous fibers via thermally induced phase separation method
The porous fibers are expected to be widely used in liquid filtration, environmental protection, and catalyst carrier field. Polyphenylene sulfide (PPS) porous fiber was prepared using polyethersulfone (PES) as pore‐forming agent by a thermally induced phase separation method. The rheological behaviors, crystallization, compatibility of the PPS/PES blending resins and fibers were characterized by the tests of high pressure capillary rheology, differential scanning calorimetry, and dynamic thermodynamic analysis, and so on; meanwhile, the structure and properties of PPS porous fibers were studied through the tests of continuity, scanning electron microscope, mercury injection, and mechanical properties. The results shown that the pore structure of porous PPS fibers can be regulated by controlling the PES content. In the spinning process, the higher winding speed (R = 300 ~ 400) and the larger PES content (60%) are more conducive to the formation of an interpenetrating structure of PES in the blend system. After the extraction of PES, PPS fibers with PES contents of 30% and 40% formed pore structure with uniform shape and size. Nevertheless, a high PES fraction of 60% leads to the collapse of the pore structure, resulting in serious structural damage. The porous fiber with controllable pore dimension is obtained by selecting proper ratio of polymers and appropriate spinning conditions.
- 14 April 2021
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (34) , 50859
Preparation and structural control of polyphenylene sulfide porous fibers via thermally induced phase separation method
The porous fibers are expected to be widely used in liquid filtration, environmental protection, and catalyst carrier field. Polyphenylene sulfide (PPS) porous fiber was prepared using polyethersulfone (PES) as pore‐forming agent by a thermally induced phase separation method. The rheological behaviors, crystallization, compatibility of the PPS/PES blending resins and fibers were characterized by the tests of high pressure capillary rheology, differential scanning calorimetry, and dynamic thermodynamic analysis, and so on; meanwhile, the structure and properties of PPS porous fibers were studied through the tests of continuity, scanning electron microscope, mercury injection, and mechanical properties. The results shown that the pore structure of porous PPS fibers can be regulated by controlling the PES content. In the spinning process, the higher winding speed (R = 300 ~ 400) and the larger PES content (60%) are more conducive to the formation of an interpenetrating structure of PES in the blend system. After the extraction of PES, PPS fibers with PES contents of 30% and 40% formed pore structure with uniform shape and size. Nevertheless, a high PES fraction of 60% leads to the collapse of the pore structure, resulting in serious structural damage. The porous fiber with controllable pore dimension is obtained by selecting proper ratio of polymers and appropriate spinning conditions.
- Open Access
- 23 March 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (19) , 11724-11731
Renewable bio-based adhesive fabricated from a novel biopolymer and soy protein
The crosslinking reaction process of SPI/EHL-ESO adhesives.
- 23 March 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (19) , 11724-11731
Open AccessRenewable bio-based adhesive fabricated from a novel biopolymer and soy protein
The crosslinking reaction process of SPI/EHL-ESO adhesives.
- 15 January 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (1) , 1869-1879
Superelastic, Hygroscopic, and Ionic Conducting Cellulose Nanofibril Monoliths by 3D Printing
Compressible and superelastic 3D printed monoliths have shown great promise in various applications including energy storage, soft electronics, and sensors. Although such elastic monoliths have been constructed using some limited materials, most notably graphene, it has not yet been achieved in nature’s most abundant material, cellulose, partly due to the strong hydrogen-bonding network within cellulose. Here, we report a 3D-printed cellulose nanofibril monolith that demonstrates superb elasticity (over 91% strain recovery after 500 cycles of compressive test), compressibility (up to 90% compressive strain), and pressure sensitivity (0.337 kPa–1) at 43% relative humidity. Such a high-performance CNF monolith is achieved through both hierarchical architecture design by 3D printing and freeze-drying and incorporation of hygroscopic salt for water absorption. The facile and efficient design strategy for a highly flexible CNF monolith is expected to expand to materials beyond cellulose and can realize much broader applications in flexible sensors, thermal insulation, and many other fields.
- 15 January 2021
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 15 (1) , 1869-1879
Superelastic, Hygroscopic, and Ionic Conducting Cellulose Nanofibril Monoliths by 3D Printing
Compressible and superelastic 3D printed monoliths have shown great promise in various applications including energy storage, soft electronics, and sensors. Although such elastic monoliths have been constructed using some limited materials, most notably graphene, it has not yet been achieved in nature’s most abundant material, cellulose, partly due to the strong hydrogen-bonding network within cellulose. Here, we report a 3D-printed cellulose nanofibril monolith that demonstrates superb elasticity (over 91% strain recovery after 500 cycles of compressive test), compressibility (up to 90% compressive strain), and pressure sensitivity (0.337 kPa–1) at 43% relative humidity. Such a high-performance CNF monolith is achieved through both hierarchical architecture design by 3D printing and freeze-drying and incorporation of hygroscopic salt for water absorption. The facile and efficient design strategy for a highly flexible CNF monolith is expected to expand to materials beyond cellulose and can realize much broader applications in flexible sensors, thermal insulation, and many other fields.
- Open Access
- 30 October 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (60) , 35273-35279
Preparation and characterization of a soy protein based bio-adhesive crosslinked by waterborne epoxy resin and polyacrylamide
A simple and useful approach by using non-toxic and water-soluble raw material to improve the bonding properties of soy protein adhesive has attracted much attention recently. The objective of this research was to provide a simple and environmentally friendly approach for preparing a high adhesion performance soy protein adhesive in aqueous solution by using waterborne-epoxy resin, soy protein and water-soluble polyacrylamide (PAM). The chemical structure and curing characteristics, as well as the initial viscosity and adhesion performance of the resulted soy protein adhesive were characterized by 1H nuclear magnetic resonance (1H-NMR), differential scanning calorimetry (DSC), a rotary viscosity meter and a plywood panel test. The 1H-NMR analysis results confirmed that epoxy resin was successfully crosslinked with the –NH2 groups of the soy protein molecule to form a water-resistance network structure, and the resulting adhesive contains active epoxy groups. It was found that the addition of PAM can decrease the apparent viscosity, lower curing temperature, and enhancing the wet shear strength of soy protein adhesives effectively, which were capable of facilitating their application as wood adhesives. The resulting soy protein adhesive containing 4% epoxy resin and 0.05% PAM dosage had a reasonable viscosity and lower cure temperature, and showed good water resistance and wet shear strength, which met the requirement for interior use plywood of the Chinese Industrial Standard. These results suggested that waterborne-epoxy resin can be used to prepare high-performance environmentally friendly soy protein adhesives, which might provide a feasible methodology to prepare bio-adhesive adhesives for plywood industrial applications.
- 30 October 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (60) , 35273-35279
Open AccessPreparation and characterization of a soy protein based bio-adhesive crosslinked by waterborne epoxy resin and polyacrylamide
A simple and useful approach by using non-toxic and water-soluble raw material to improve the bonding properties of soy protein adhesive has attracted much attention recently. The objective of this research was to provide a simple and environmentally friendly approach for preparing a high adhesion performance soy protein adhesive in aqueous solution by using waterborne-epoxy resin, soy protein and water-soluble polyacrylamide (PAM). The chemical structure and curing characteristics, as well as the initial viscosity and adhesion performance of the resulted soy protein adhesive were characterized by 1H nuclear magnetic resonance (1H-NMR), differential scanning calorimetry (DSC), a rotary viscosity meter and a plywood panel test. The 1H-NMR analysis results confirmed that epoxy resin was successfully crosslinked with the –NH2 groups of the soy protein molecule to form a water-resistance network structure, and the resulting adhesive contains active epoxy groups. It was found that the addition of PAM can decrease the apparent viscosity, lower curing temperature, and enhancing the wet shear strength of soy protein adhesives effectively, which were capable of facilitating their application as wood adhesives. The resulting soy protein adhesive containing 4% epoxy resin and 0.05% PAM dosage had a reasonable viscosity and lower cure temperature, and showed good water resistance and wet shear strength, which met the requirement for interior use plywood of the Chinese Industrial Standard. These results suggested that waterborne-epoxy resin can be used to prepare high-performance environmentally friendly soy protein adhesives, which might provide a feasible methodology to prepare bio-adhesive adhesives for plywood industrial applications.
- 16 September 2019
- Published by Springer Nature in Applied Nanoscience
- Vol. 10 (2) , 411-419
Combination of water-soluble chemical grafting and gradient freezing to fabricate elasticity-enhanced and anisotropic nanocellulose aerogels
- 16 September 2019
- Published by Springer Nature in Applied Nanoscience
- Vol. 10 (2) , 411-419
Combination of water-soluble chemical grafting and gradient freezing to fabricate elasticity-enhanced and anisotropic nanocellulose aerogels