Nobuhiro Hata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Nobuhiro Hata has a total of 207 co-authors. Here are the top co-authors by number of shared publications:
Takamaro Kikkawa
Research Institute for Nanodevice and Bio Systems, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8527, Japan
27 shared publicationsAkihisa Matsuda
21 shared publicationsT. Kikkawa
Research Institute for Nanodevice and Bio Systems, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8527, Japan
14 shared publicationsH. Tanaka
MIRAI , Association of Super-Advanced Electronics Technology, 16-1 Onogawa, Tsukuba, Ibaraki 305-8569, Japan
11 shared publicationsKazuhiro Yamada
10 shared publicationsTakenobu Yoshino
National Institute of Advanced Industrial Science and Technology
10 shared publications
Latest Publications
- 1 January 2016
- Published by Japan Stroke Society in Japanese Journal of Stroke
- Vol. 38 (2) , 116-119
A case of transient acute hydrocephalus due to intraventricular hemorrhage
症例は76 歳男性.心房細動に対してワルファリン内服中であった.右視床出血,脳室穿破の診断で緊急入院となり,保存的治療の方針とした.経過観察のCT では急速な脳室内血腫のwashout を認めていたが,発症2 日後に突然意識レベルが低下した.CT で急性水頭症が出現しており,原因は中脳水道に陥頓した血腫によるものと判断した.脳室外ドレナージを施行したものの,術中に意識レベルの急速な改善を認めた.術後CT では,水頭症の改善と陥頓血腫の消失を認めた.通常,脳室内血腫に伴う水頭症は発症時から速やかに進行するものが大半だが,本症例では遅発性に急性発症の水頭症を経験した.経過中に脳室内血腫が急速にwash out しており,ワルファリンによる凝固不全状態が,脆弱な血腫形成に関与し,遊離血腫による陥頓を来した可能性が示唆された.
- 1 January 2016
- Published by Japan Stroke Society in Japanese Journal of Stroke
- Vol. 38 (2) , 116-119
A case of transient acute hydrocephalus due to intraventricular hemorrhage
症例は76 歳男性.心房細動に対してワルファリン内服中であった.右視床出血,脳室穿破の診断で緊急入院となり,保存的治療の方針とした.経過観察のCT では急速な脳室内血腫のwashout を認めていたが,発症2 日後に突然意識レベルが低下した.CT で急性水頭症が出現しており,原因は中脳水道に陥頓した血腫によるものと判断した.脳室外ドレナージを施行したものの,術中に意識レベルの急速な改善を認めた.術後CT では,水頭症の改善と陥頓血腫の消失を認めた.通常,脳室内血腫に伴う水頭症は発症時から速やかに進行するものが大半だが,本症例では遅発性に急性発症の水頭症を経験した.経過中に脳室内血腫が急速にwash out しており,ワルファリンによる凝固不全状態が,脆弱な血腫形成に関与し,遊離血腫による陥頓を来した可能性が示唆された.
- 19 March 2015
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 54 (4S) , 04DD10
Impact of inserted Ta ultrathin layer and postdeposition annealing on the forming voltage of Ir/Ti/Ta/HfO2/TiN/Ti/SiO2/Si resistive switching devices
We fabricated resistive switching (RS) devices that possess the Ir/Ti/Ta/HfO2/TiN/Ti/SiO2/Si structure with different Ta and Ti layer thicknesses by a magnetron sputtering method. The lowering of forming voltage was observed when the combination of Ti and Ta layer thicknesses was Ti (45 nm)/Ta (5 nm) and the device was annealed after the deposition of the top electrode. In this sample, the migration of oxygen ions from the HfO2 layer to the Ti layer through the Ta layer upon thermal annealing was confirmed by secondary ion mass spectroscopy measurements. On the basis of the dependence of the forming voltage on the combination of the top electrode thicknesses and the presence or absence of postdeposition annealing, we discuss a method of reducing the oxide layer more effectively without changing the material combination of the metal electrode and the oxide layer.
- 19 March 2015
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 54 (4S) , 04DD10
Impact of inserted Ta ultrathin layer and postdeposition annealing on the forming voltage of Ir/Ti/Ta/HfO2/TiN/Ti/SiO2/Si resistive switching devices
We fabricated resistive switching (RS) devices that possess the Ir/Ti/Ta/HfO2/TiN/Ti/SiO2/Si structure with different Ta and Ti layer thicknesses by a magnetron sputtering method. The lowering of forming voltage was observed when the combination of Ti and Ta layer thicknesses was Ti (45 nm)/Ta (5 nm) and the device was annealed after the deposition of the top electrode. In this sample, the migration of oxygen ions from the HfO2 layer to the Ti layer through the Ta layer upon thermal annealing was confirmed by secondary ion mass spectroscopy measurements. On the basis of the dependence of the forming voltage on the combination of the top electrode thicknesses and the presence or absence of postdeposition annealing, we discuss a method of reducing the oxide layer more effectively without changing the material combination of the metal electrode and the oxide layer.
- 1 May 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (5S) , 05EC05
Characterization and Control of Nanostructure Size Variation
Results from the characterization of the size variation of nanostructures in a series of thin films prepared by varying a component fraction in the precursor solution are reported and discussed in terms of the physics and chemistry behind the variation. Changes in the refractive index and thickness upon vapor adsorption were used to calculate the adsorbed volume as a function of vapor pressure and then analyzed to obtain size, size variation, and total volume of nanostructures in the films. With an increasing amount of dimethyldiethoxysilane (DMDEOS) in precursor solution, the condensation polymerization reaction proceeded to decrease the silanol group concentration, increasing the ≡Si–O–Si≡ network connectivity number (m) and Young's modulus (E) of the resultant film. With further increase of the DMDEOS concentration, the methyl group concentration in film was increased with decreasing m and E. It was demonstrated that the experimentally observed dependence of the nanostructure size variation reflects the physics and chemistry behind the preparation processes, and provides a good insight into a strategy for minimizing the variability.
- 1 May 2012
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 51 (5S) , 05EC05
Characterization and Control of Nanostructure Size Variation
Results from the characterization of the size variation of nanostructures in a series of thin films prepared by varying a component fraction in the precursor solution are reported and discussed in terms of the physics and chemistry behind the variation. Changes in the refractive index and thickness upon vapor adsorption were used to calculate the adsorbed volume as a function of vapor pressure and then analyzed to obtain size, size variation, and total volume of nanostructures in the films. With an increasing amount of dimethyldiethoxysilane (DMDEOS) in precursor solution, the condensation polymerization reaction proceeded to decrease the silanol group concentration, increasing the ≡Si–O–Si≡ network connectivity number (m) and Young's modulus (E) of the resultant film. With further increase of the DMDEOS concentration, the methyl group concentration in film was increased with decreasing m and E. It was demonstrated that the experimentally observed dependence of the nanostructure size variation reflects the physics and chemistry behind the preparation processes, and provides a good insight into a strategy for minimizing the variability.
- 11 April 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (6) , H659-H665
Influence of Synthesis Process on Mechanical and Electrical Characteristics of Mesoporous Pure Silica-Zeolite
The dielectric constant, elastic modulus and reliability of the pure silica-zeolite composite film which was formed by self-assembly of porous silica having hydrothermally crystallized zeolite nanoparticles. Fourier-transform-infrared spectroscopy indicated that Si-OH and O-H bonds decreased by zeolite formation, resulting in the decrease of the dielectric constant. Silylation hardening by 1,3,5,7-tetramethylcyclotetrasiloxane (TMCTS) vapor treatment could decrease the dielectric constant due to the decrease of Si-OH and O-H bonds. The elastic modulus of 7.03 GPa and the dielectric constant of 1.94 were achieved for the meso-porous silica-zeolite film by silylation hardening. Furthermore, mean-time-to-failure (MTF) lifetime of time-dependent dielectric breakdown (TDDB) is longer than ten years at 125°C under the electric field of 3.4 MV/cm.
- 11 April 2011
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (6) , H659-H665
Influence of Synthesis Process on Mechanical and Electrical Characteristics of Mesoporous Pure Silica-Zeolite
The dielectric constant, elastic modulus and reliability of the pure silica-zeolite composite film which was formed by self-assembly of porous silica having hydrothermally crystallized zeolite nanoparticles. Fourier-transform-infrared spectroscopy indicated that Si-OH and O-H bonds decreased by zeolite formation, resulting in the decrease of the dielectric constant. Silylation hardening by 1,3,5,7-tetramethylcyclotetrasiloxane (TMCTS) vapor treatment could decrease the dielectric constant due to the decrease of Si-OH and O-H bonds. The elastic modulus of 7.03 GPa and the dielectric constant of 1.94 were achieved for the meso-porous silica-zeolite film by silylation hardening. Furthermore, mean-time-to-failure (MTF) lifetime of time-dependent dielectric breakdown (TDDB) is longer than ten years at 125°C under the electric field of 3.4 MV/cm.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (5) , H519-H525
Ultralow-k/Cu Damascene Multilevel Interconnects Using High Porosity and High Modulus Self-Assembled Porous Silica
We introduced a high porosity ultralow- kk film into a Cu damascene interconnect without increasing the dielectric constant (k)(k) of a low- kk film after interconnect formation. A high elastic modulus (9 GPa) with ultralow- kk value (<2.1)(kk value and dielectric properties. A sidewall protection process carried out before metalization protects the low- kk film against process-induced damage. The time-dependent-dielectric breakdown lifetime is 10 years at a high electric field of 2.3 MV/cm.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (5) , H519-H525
Ultralow-k/Cu Damascene Multilevel Interconnects Using High Porosity and High Modulus Self-Assembled Porous Silica
We introduced a high porosity ultralow- kk film into a Cu damascene interconnect without increasing the dielectric constant (k)(k) of a low- kk film after interconnect formation. A high elastic modulus (9 GPa) with ultralow- kk value (<2.1)(kk value and dielectric properties. A sidewall protection process carried out before metalization protects the low- kk film against process-induced damage. The time-dependent-dielectric breakdown lifetime is 10 years at a high electric field of 2.3 MV/cm.
- 24 September 2009
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 48 (9)
Integration of Self-Assembled Porous Silica in Low-k/Cu Damascene Interconnects
- 24 September 2009
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 48 (9)
Integration of Self-Assembled Porous Silica in Low-k/Cu Damascene Interconnects
- 1 January 2009
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 156 (2) , H98-H105
Effect of Silylation Hardening on the Electrical Characteristics of Mesoporous Pure Silica Zeolite Film
A pure silica zeolite film was formed by use of hydrothermally crystallized zeolite nanoparticles in a porous silica precursor. The effects of silylation hardening by tetramethylcyclotetrasiloxane (TMCTS) vapor treatment on the electrical characteristics of pure silica zeolite films were investigated. The results from Fourier-transform-IR spectroscopy indicated that the O–H bond decreased by zeolite formation, resulting in the decrease of the leakage current by 1∕101∕10 . Silylation hardening by TMCTS vapor treatment could reduce the leakage current by 4 orders of magnitude due to the reduction of Si–OH and O–H bonds. The elastic modulus of 5.18GPa5.18GPa and the dielectric constant of 1.96 were achieved simultaneously by silylation hardening. Consequently, the electrical and mechanical characteristics of the pure silica zeolite film as well as the time dependent dielectric breakdown lifetime were improved.
- 1 January 2009
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 156 (2) , H98-H105
Effect of Silylation Hardening on the Electrical Characteristics of Mesoporous Pure Silica Zeolite Film
A pure silica zeolite film was formed by use of hydrothermally crystallized zeolite nanoparticles in a porous silica precursor. The effects of silylation hardening by tetramethylcyclotetrasiloxane (TMCTS) vapor treatment on the electrical characteristics of pure silica zeolite films were investigated. The results from Fourier-transform-IR spectroscopy indicated that the O–H bond decreased by zeolite formation, resulting in the decrease of the leakage current by 1∕101∕10 . Silylation hardening by TMCTS vapor treatment could reduce the leakage current by 4 orders of magnitude due to the reduction of Si–OH and O–H bonds. The elastic modulus of 5.18GPa5.18GPa and the dielectric constant of 1.96 were achieved simultaneously by silylation hardening. Consequently, the electrical and mechanical characteristics of the pure silica zeolite film as well as the time dependent dielectric breakdown lifetime were improved.
- 24 December 2008
- Published by Elsevier in Microelectronic Engineering
- Vol. 86 (4-6) , 1009-1012
Thermal conductivity of low-k films of varying porosity and direct measurements on silicon substrate
- 24 December 2008
- Published by Elsevier in Microelectronic Engineering
- Vol. 86 (4-6) , 1009-1012
Thermal conductivity of low-k films of varying porosity and direct measurements on silicon substrate