GPGiuseppina Pace

Giuseppina Pace

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Giuseppina Pace has a total of 157 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Self‐Powered Neuromorphic Touch Sensors Based on Triboelectric Devices: Current Approaches and Open Challenges

    by Fabrizio Torricelli, Giuseppina Pace

    Advanced neuromorphic systems mimicking the human sensory and nervous system will enable artificial perception for intelligent robotics and human machine interfaces. Among sensing modalities, tactile perception is crucial for replicating human somatosensory and motor functions, with significant potential to restore impaired tactile capabilities. Artificial neuromorphic sensors can directly sense, store and process various stimuli information and implement computation functions such as perception, learning, and memory. However, computational energy efficiency must be achieved with novel neuromorphic systems capable of environmental energy harvesting enabling self‐powered sensing, and real‐time edge data processing. Here, we focus on the integration of tactile self‐powered sensors based on triboelectric nanogenerators (TENGs) with neuromorphic devices. We systematically discuss current approaches for coupling TENGs with artificial synapses and neurons, covering the main integration architectures (ex situ, discrete circuit, direct gating, monolithic), the primary operational modes (displacement‐driven, pulse‐driven), and neuromorphic functions as short‐ and long‐term plasticity, memory, and logic‐in‐memory computing. We also highlight the mechanisms of signal generation and transduction, and the strategies used to enhance performance and energy efficiency. The review concludes with a discussion on key challenges and future directions for developing sustainable, low‐power, and multifunctional neuromorphic tactile systems, paving the way toward fully integrated self‐powered artificial somatosensory platforms.


  • Open Access

    Triboelectric technologies for adaptive and self-powered neuromorphic tactile sensing

    by Giuseppina Pace, Chiara Bartolozzi

    Tactile perception is fundamental to how humans interact with the world, underpinning both physical manipulation and emotional experiences. This complex sensory system relies on highly specialized mechanoreceptors embedded in the skin, which detect and relay signals through afferent neuronal fibers to the brain. Mechanoreceptors and afferent neurons perform local signal preprocessing, enabling transduction, filtering, adaptation, and sensory encoding before transmission to the central nervous system. While artificial tactile sensors inspired on the sophisticated functionalities of biological systems have been proposed, doing so in an energy efficient manner requires the integration of mechanical energy harvesters as transducers. Triboelectric nanogenerators have demonstrated significant potential as artificial mechanoreceptors, offering fully self-powered tactile sensing capabilities while simultaneously being able to supply energy to nearby low-power electronic components involved in perceptual processing. To bring significant progress in this technology, novel devices should emulate not only the different response of the various skin mechanoreceptors but also the first layer of tactile encoding processing accomplished at the skin level, while also minimizing energy consumption and environmental impact. Only few triboelectric (TE) effect driven tactile sensors have achieved the emulation of sophisticated adaptation features, such as slow and fast adaptation, typical of human tactile afferent neurons. Two approaches have been followed so far, which comprise the development of multifunctional TE-transducers capable of replicating more than one biological mechanoreceptor adaptive behavior, and fully integrated sensors embedding the TE-transducer and neuromorphic devices. Both approaches are still at their infancy, both in materials and device design, and still lack the high degree of integration, reproducibility and scalability that is required for their interface with standard electronics. Addressing such a pivotal challenge will improve neuroprosthesis integration, tactile robotics, human–machine interfaces, and the field of neuromorphic engineering for extreme edge processing.


  • Open Access

    Unleashing the Impact of Topological Surface States on the Thermoelectric Properties of Granular Sb2Te3 Thin Films Deposited on Flexible Substrates

    by Lorenzo Locatelli, Pietro Rossi, Arun Kumar, Claudia Wiemer, Alessio Lamperti, Roberto Mantovan, Grazia Raciti, Kai Xu, Juan Sebastián Reparaz, Mario Caironi, et al.

    Between thermoelectric materials, topological insulators (TIs) such as Sb2Te3 can effectively decouple phonon and electronic transport. Recent works mostly focused on TI composites or superlattices, where the contribution of the topological surface states (TSS) to the thermoelectric properties is overshadowed by other mechanisms such as energy filtering or electronic band reorganization. Here, we investigate efficient thermoelectric Sb2Te3 polycrystalline thin films deposited on plastic foil. Magneto-transport studies show that the presence of TSS in more granular films is responsible for the 2-orders of magnitude higher electronic conductivity compared to thick films owing to larger crystalline domains (> 100 nm). The prevalence of the bulk states in thick films reduces both their thermal and electronic conductivity; however, they are responsible for an increase in the Seebeck coefficient. Overall, we show that to achieve higher thermoelectric performance of single-component TI films, it is necessary to tune the relative contribution of topological and bulk states. This will potentially allow for the development of cost-effective thermoelectric generators, reducing the complexity of competitive systems based on multicomponent heterostructures.


  • Open Access

    Sustainable polymer materials for triboelectric and hybrid energy harvesting

    by T. Rodrigues-Marinho, R. Brito-Pereira, G. Pace, C. R. Tubio, S. Lanceros-Méndez, P. Costa

    The generation of sustainable electrical energy from wasted environmental mechanical stimuli is a necessary step for supplying low-power devices in this digitalization era. Sustainable polymers are an attractive class of materials for energy harvesting applications due to their abundance, low ecological impact, and simple and low-cost processing for polymer-based devices. Thus, solvent-processed hydroxypropyl cellulose (HPC), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), poly-l-lactic acid, and silk fibroin were evaluated as active materials in triboelectric nanogenerators with the aim of replacing non-sustainable synthetic materials. Harvesting devices incorporating sustainable polymers demonstrate superior performance compared to some established materials in the triboelectric series. Notably, HPC and PHBV outperform aluminum, emerging as novel, flexible, and solvent processable sustainable materials that can be included in the triboelectric series as positive tribomaterials. Furthermore, when combined with piezoelectric polyvinylidene fluoride (PVDF), these polymers exhibit enhanced performance as hybrid piezoelectric–triboelectric nanogenerators. The output voltage of the HPC–PVDF pair reaches voltages up to 100 V. This combination demonstrates the feasibility of using sustainable materials to achieve improved energy-harvesting capabilities while supporting eco-friendly devices with a variety of designs based on solvent based processability, compatible with additive manufacturing.


  • Open Access

    Boosting Contact Electrification by Amorphous Polyvinyl Alcohol Endowing Improved Contact Adhesion and Electrochemical Capacitance

    by Lisa Serairi, Chiara Santillo, Philippe Basset, Marino Lavorgna, Giuseppina Pace

    Ion conductive hydrogels are relevant components in wearable, biocompatible, and biodegradable electronics. Polyvinyl‐alcohol (PVA) homopolymer is often the favored choice for integration into supercapacitors and energy harvesters as in sustainable triboelectric nanogenerators (TENGs). However, to further improve hydrogel‐based TENGs, a deeper understanding of the impact of their composition and structure on devices performance is necessary. Here, it is shown how ionic hydrogels based on an amorphous‐PVA (a‐PVA) allow to fabricate TENGs that outperform the one based on the homopolymer. When used as tribomaterial, the Li‐doped a‐PVA allows to achieve a twofold higher pressure sensitivity compared to PVA, and to develop a conformable e‐skin. When used as an ionic conductor encased in an elastomeric tribomaterial, 100 mW cm−2 average power is obtained, providing 25% power increase compared to PVA. At the origin of such enhancement is the increased softness, stronger adhesive contact, higher ionic mobility (> 3,5‐fold increase), and long‐term stability achieved with Li‐doped a‐PVA. These improvements are attributed to the high density of hydroxyl groups and amorphous structure present in the a‐PVA, enabling a strong binding to water molecules. This work discloses novel insights on those parameters allowing to develop easy‐processable, stable, and highly conductive hydrogels for integration in conformable, soft, and biocompatible TENGs.


  • Open Access

    2D Materials‐Based Electrochemical Triboelectric Nanogenerators

    by Giuseppina Pace, Antonio Esau del Rio Castillo, Alessio Lamperti, Simone Lauciello, Francesco Bonaccorso

    The integration of 2D materials in triboelectric nanogenerators (TENGs) is known to increase the mechanical‐to‐electrical power conversion efficiency. 2D materials are used in TENGs with multiple roles as triboelectric material, charge‐trapping fillers, or as electrodes. Here, novel TENGs based on few‐layers graphene (FLG) electrodes and stable gel electrolytes composed of liquid phase exfoliated 2D‐transition metal dichalcogenides and polyvinyl alcohol are developed. TENGs embedding FLG and gel composites show competitive open‐circuit voltage (≈ 300 V), instant peak power (530 mW m−2), and stability (> 11 months). These values correspond to a seven‐fold higher electrical output compared to TENGs embedding bare FLG electrodes. It is demonstrated that such a significant improvement depends on the high electrical double‐layer capacitance (EDLC) of FLG electrodes functionalized with the gel composites. The wet encapsulation of the TENGs is shown to be an effective strategy to increase their power output further highlighting the EDLC role. It is also shown that the EDLC is dependent upon the transition metal (W vs Mo) rather than the relative abundance of 1T or 2H phases. Overall, this work lays down the roots for novel sustainable electrochemical‐(e)‐TENGs developed exploiting strategies typically used in electrochemical capacitors.


  • Open Access

    Intrinsically distinct hole and electron transport in conjugated polymers controlled by intra and intermolecular interactions

    by Giuseppina Pace, Ilaria Bargigia, Yong-Young Noh, Carlos Silva, Mario Caironi

    It is still a matter of controversy whether the relative difference in hole and electron transport in solution-processed organic semiconductors is either due to intrinsic properties linked to chemical and solid-state structure or to extrinsic factors, as device architecture. We here isolate the intrinsic factors affecting either electron or hole transport within the same film microstructure of a model copolymer semiconductor. Relatively, holes predominantly bleach inter-chain interactions with H-type electronic coupling character, while electrons' relaxation more strongly involves intra-chain interactions with J-type character. Holes and electrons mobility correlates with the presence of a charge transfer state, while their ratio is a function of the relative content of intra- and inter-molecular interactions. Such fundamental observation, revealing the specific role of the ground-state intra- and inter-molecular coupling in selectively assisting charge transport, allows predicting a more favorable hole or electron transport already from screening the polymer film ground state optical properties.

  • Open Access

    Intrinsically distinct hole and electron transport in conjugated polymers controlled by intra and intermolecular interactions

    by Giuseppina Pace, Ilaria Bargigia, Yong-Young Noh, Carlos Silva, Mario Caironi

    It is still a matter of controversy whether the relative difference in hole and electron transport in solution-processed organic semiconductors is either due to intrinsic properties linked to chemical and solid-state structure or to extrinsic factors, as device architecture. We here isolate the intrinsic factors affecting either electron or hole transport within the same film microstructure of a model copolymer semiconductor. Relatively, holes predominantly bleach inter-chain interactions with H-type electronic coupling character, while electrons’ relaxation more strongly involves intra-chain interactions with J-type character. Holes and electrons mobility correlates with the presence of a charge transfer state, while their ratio is a function of the relative content of intra- and inter-molecular interactions. Such fundamental observation, revealing the specific role of the ground-state intra- and inter-molecular coupling in selectively assisting charge transport, allows predicting a more favorable hole or electron transport already from screening the polymer film ground state optical properties.


  • Inkjet printed organic detectors with flat responsivity up to the NIR and inherent UV optical filtering

    by Giuseppina Pace, Andrea Grimoldi, Zachary Rengert, Guillermo C. Bazan, Dario Natali, Mario Caironi