Dave R. Stegman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Dave R. Stegman has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Louis Moresi
Research School of Earth Sciences, Australian National University, Canberra, ACT 2601, Australia
8 shared publications J. Freeman
School of Mathematical Sciences, Monash University, Melbourne, Victoria 3800, Australia
7 shared publications- Wouter Pieter Schellart
Department of Earth Sciences Vrije Universiteit Amsterdam Amsterdam The Netherlands
7 shared publications - David A. May
Institute of Geophysics and Planetary Physics Scripps Institution of Oceanography University of California San Diego La Jolla CA USA
5 shared publications - Rebecca Farrington
AuScope, School of Geography, Earth & Atmospheric Sciences, University of Melbourne, Parkville, VIC, Australia
5 shared publications - Fabio Antonio Capitanio
School of Earth, Atmosphere and Environment, Monash University, Clayton, Australia
4 shared publications
Latest Publications
- Open Access
- 29 October 2026
- Published by California Digital Library (CDL) in EarthArXiv
Constraining Lithospheric Delamination on Venus with Flexural Topography and Trench Geometry
Rollback-style lithospheric recycling has been proposed for a subset of Venusian coronae and other tectonic features based on the presence of trench-outer-rise systems, but the mechanism and conditions required to initiate recycling remain poorly understood. Peel-back delamination (PBD) is a proposed mechanism in which dense lithospheric mantle decouples and peels away from a thin layer of overlying crust, resulting in slab rollback. PBD has only been modeled in 2D, and therefore its 3D surface expression is unknown. Here, we present the first three-dimensional models of peel-back delamination on Venus and compare their predicted trench geometry and flexural topography with observations from Artemis Corona, Atahensik Corona, and Derceto Plateau. PBD initiation is facilitated by increasing lithosphere thickness which enhances the negative buoyancy of the lithospheric mantle and drives decoupling from the weak, buoyant crust. Once initiated, rift geometry, lithosphere structure around the rift, and maximum yield strength control the evolution of trench geometry throughout PBD. Elastic thickness (Te) provides an independent constraint on lithospheric thickness, increasing with thermal lithospheric thickness. Comparisons with observations indicate that models of Artemis and Atahensik Corona best satisfy both trench geometry and flexural topography constraints, whereas the Derceto Plateau model reproduces trench geometry but not flexural topography. At Artemis Corona, along-trench variation in Te may reflect differences in subsurface slab morphology and plate bending. Te estimates from the southeastern trench at Artemis Corona favor a thermal lithospheric thickness of approximately 200-250 km for a 1700 K mantle.
- 29 October 2026
- Published by California Digital Library (CDL) in EarthArXiv
Open AccessConstraining Lithospheric Delamination on Venus with Flexural Topography and Trench Geometry
Rollback-style lithospheric recycling has been proposed for a subset of Venusian coronae and other tectonic features based on the presence of trench-outer-rise systems, but the mechanism and conditions required to initiate recycling remain poorly understood. Peel-back delamination (PBD) is a proposed mechanism in which dense lithospheric mantle decouples and peels away from a thin layer of overlying crust, resulting in slab rollback. PBD has only been modeled in 2D, and therefore its 3D surface expression is unknown. Here, we present the first three-dimensional models of peel-back delamination on Venus and compare their predicted trench geometry and flexural topography with observations from Artemis Corona, Atahensik Corona, and Derceto Plateau. PBD initiation is facilitated by increasing lithosphere thickness which enhances the negative buoyancy of the lithospheric mantle and drives decoupling from the weak, buoyant crust. Once initiated, rift geometry, lithosphere structure around the rift, and maximum yield strength control the evolution of trench geometry throughout PBD. Elastic thickness (Te) provides an independent constraint on lithospheric thickness, increasing with thermal lithospheric thickness. Comparisons with observations indicate that models of Artemis and Atahensik Corona best satisfy both trench geometry and flexural topography constraints, whereas the Derceto Plateau model reproduces trench geometry but not flexural topography. At Artemis Corona, along-trench variation in Te may reflect differences in subsurface slab morphology and plate bending. Te estimates from the southeastern trench at Artemis Corona favor a thermal lithospheric thickness of approximately 200-250 km for a 1700 K mantle.
- Open Access
- 6 January 2026
- Published by California Digital Library (CDL) in Geodynamica
- Vol. 1 (1)
Heat flow scaling relationships for the glass-ceiling convective regime and implications for Venus
Most rocky planets operate in a stagnant lid convective regime. They are characterized by the strongly temperature-dependent viscosity that locks the cold mantle silicates near the surface into a stiff layer, or lid, which does not participate in mantle convection. Stagnant lid planets have lower surface heat flows than mobile lid planets like Earth; however, Earth-like heat flows have been inferred from elastic lithosphere thickness estimates for Venus leading researchers to wonder how these higher heat fluxes occur. Mineral phase transitions in the upper mantle can inhibit or enhance mass exchange through the mantle transition region at pressures and temperatures relevant for larger terrestrial mantles such as Earth’s or Venus’s. For a multiphase composition of anhydrous pyrolite, small cold plume instabilities originating at the base of the stagnant lid sink to a depth of about 600 km. When a critical amount of material accumulates, the drips avalanche into the lower mantle as a large coherent downwelling, generating warm return flow into the upper mantle. Previous work using 2D numerical models of mantle convection with an assumed anhydrous pyrolite composition showed wadsleyite transforms into majorite plus ferropericlase for temperatures warmer than 1950 K. This study explores how the endothermic WMF transition demonstrates weaker upper-lower mantle layering for increasingly higher Rayleigh numbers and higher mantle temperatures. This counterintuitive weakening induces more numerous and continuous flushing events (mantle avalanches) between the upper and lower mantle, inducing a state of sustained, higher-efficiency heat flow throughout the mantle, manifesting as a “jump” or upwards shift in the Rayleigh-Nusselt scaling compared to colder models that also exhibit the effects of mantle layering. This higher efficiency state of continuously- layered-and-flushed stagnant lid convection may be relevant for Venus which lacks apparent plate tectonics yet has regions which show evidence of Earth-like (high) surface heat fluxes.
- 6 January 2026
- Published by California Digital Library (CDL) in Geodynamica
- Vol. 1 (1)
Open AccessHeat flow scaling relationships for the glass-ceiling convective regime and implications for Venus
Most rocky planets operate in a stagnant lid convective regime. They are characterized by the strongly temperature-dependent viscosity that locks the cold mantle silicates near the surface into a stiff layer, or lid, which does not participate in mantle convection. Stagnant lid planets have lower surface heat flows than mobile lid planets like Earth; however, Earth-like heat flows have been inferred from elastic lithosphere thickness estimates for Venus leading researchers to wonder how these higher heat fluxes occur. Mineral phase transitions in the upper mantle can inhibit or enhance mass exchange through the mantle transition region at pressures and temperatures relevant for larger terrestrial mantles such as Earth’s or Venus’s. For a multiphase composition of anhydrous pyrolite, small cold plume instabilities originating at the base of the stagnant lid sink to a depth of about 600 km. When a critical amount of material accumulates, the drips avalanche into the lower mantle as a large coherent downwelling, generating warm return flow into the upper mantle. Previous work using 2D numerical models of mantle convection with an assumed anhydrous pyrolite composition showed wadsleyite transforms into majorite plus ferropericlase for temperatures warmer than 1950 K. This study explores how the endothermic WMF transition demonstrates weaker upper-lower mantle layering for increasingly higher Rayleigh numbers and higher mantle temperatures. This counterintuitive weakening induces more numerous and continuous flushing events (mantle avalanches) between the upper and lower mantle, inducing a state of sustained, higher-efficiency heat flow throughout the mantle, manifesting as a “jump” or upwards shift in the Rayleigh-Nusselt scaling compared to colder models that also exhibit the effects of mantle layering. This higher efficiency state of continuously- layered-and-flushed stagnant lid convection may be relevant for Venus which lacks apparent plate tectonics yet has regions which show evidence of Earth-like (high) surface heat fluxes.
- Open Access
- 23 September 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (9)
Modeling Subduction With Extremely Fast Trench Retreat
The Tonga‐Kermadec subduction zone exhibits the fastest observed trench retreat and convergence near its northern end. However, a paradox exists: despite the rapid trench retreat, the Tonga slab maintains a relatively steep dip angle above 400 km depth. The slab turns flat around 400 km, then steepening again until encountering a stagnant segment near 670 km. Despite its significance for understanding slab dynamics, no existing numerical model has successfully demonstrated how such a distinct slab morphology can be generated under the fast convergence. Here we run subduction models that successfully reproduce the slab geometries while incorporating the observed subduction rate. We use a hybrid velocity boundary condition, imposing velocities on the arc and subducting plate while allowing the overriding plate to respond freely. This approach is crucial for achieving a good match between the modeled and observed Tonga slab. The results explain how the detailed slab structure is highly sensitive to physical parameters including the seafloor age and the mantle viscosity. Notably, a nonlinear rheology, where dislocation creep reduces upper mantle viscosity under strong mantle flow, is essential. The weakened upper mantle allows for a faster slab sinking rate, which explains the large dip angle. Our findings highlight the utilizing rheological parameters that lead to extreme viscosity variations within numerical models to achieve an accurate representation of complex subduction systems like the Tonga‐Kermadec zone. Our study opens new avenues for further study of ocean‐ocean subduction systems, advancing our understanding of their role in shaping regional and global tectonics.
- 23 September 2024
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 129 (9)
Open AccessModeling Subduction With Extremely Fast Trench Retreat
The Tonga‐Kermadec subduction zone exhibits the fastest observed trench retreat and convergence near its northern end. However, a paradox exists: despite the rapid trench retreat, the Tonga slab maintains a relatively steep dip angle above 400 km depth. The slab turns flat around 400 km, then steepening again until encountering a stagnant segment near 670 km. Despite its significance for understanding slab dynamics, no existing numerical model has successfully demonstrated how such a distinct slab morphology can be generated under the fast convergence. Here we run subduction models that successfully reproduce the slab geometries while incorporating the observed subduction rate. We use a hybrid velocity boundary condition, imposing velocities on the arc and subducting plate while allowing the overriding plate to respond freely. This approach is crucial for achieving a good match between the modeled and observed Tonga slab. The results explain how the detailed slab structure is highly sensitive to physical parameters including the seafloor age and the mantle viscosity. Notably, a nonlinear rheology, where dislocation creep reduces upper mantle viscosity under strong mantle flow, is essential. The weakened upper mantle allows for a faster slab sinking rate, which explains the large dip angle. Our findings highlight the utilizing rheological parameters that lead to extreme viscosity variations within numerical models to achieve an accurate representation of complex subduction systems like the Tonga‐Kermadec zone. Our study opens new avenues for further study of ocean‐ocean subduction systems, advancing our understanding of their role in shaping regional and global tectonics.
- Open Access
- 3 August 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (15)
Geodynamic Evolution of the Lau Basin
The formation of Lau Basin records an extreme event of plate tectonics, with the associated Tonga trench exhibiting the fastest retreat in the world (16 cm/yr). Yet paleogeographic reconstructions suggest that seafloor spreading in the Lau Basin only initiated around 6 Ma. This kinematics is difficult to reconcile with our present understanding of how subduction drives plate motions. Using numerical models, we propose that eastward migration of the Lau Ridge concurrent with trench retreat explains both the narrow width and thickened crust of the Lau Basin. To match the slab geometry and basin width along the Tonga‐Kermadec trench, our models suggest that fast trench retreat rate of 16 cm/yr might start ~15 Ma. Tonga slab rollback induced vigorous mantle flow underneath the South Fiji Basin which is driving the extension and thinning of the basin and contributing to its observed deeper bathymetry compared to neighboring basins.
- 3 August 2024
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 51 (15)
Open AccessGeodynamic Evolution of the Lau Basin
The formation of Lau Basin records an extreme event of plate tectonics, with the associated Tonga trench exhibiting the fastest retreat in the world (16 cm/yr). Yet paleogeographic reconstructions suggest that seafloor spreading in the Lau Basin only initiated around 6 Ma. This kinematics is difficult to reconcile with our present understanding of how subduction drives plate motions. Using numerical models, we propose that eastward migration of the Lau Ridge concurrent with trench retreat explains both the narrow width and thickened crust of the Lau Basin. To match the slab geometry and basin width along the Tonga‐Kermadec trench, our models suggest that fast trench retreat rate of 16 cm/yr might start ~15 Ma. Tonga slab rollback induced vigorous mantle flow underneath the South Fiji Basin which is driving the extension and thinning of the basin and contributing to its observed deeper bathymetry compared to neighboring basins.
- 2 August 2024
- Published by Springer Nature in Nature Geoscience
- Vol. 17 (8) , 740-746
Ishtar Terra highlands on Venus raised by craton-like formation mechanisms
- 2 August 2024
- Published by Springer Nature in Nature Geoscience
- Vol. 17 (8) , 740-746
Ishtar Terra highlands on Venus raised by craton-like formation mechanisms
- Open Access
- 30 June 2024
- Published by California Digital Library (CDL) in EarthArXiv
Mantle avalanches in a Venus-like stagnant lid planet
Stagnant lid planets are characterized by a globe-encircling, conducting lid that is thick and strong, which leads to reduced global surface heat flows. Consequently, the mantles of such planets can have warmer interiors than Earth, and interestingly, a pyrolitic mantle composition under warmer conditions is predicted to have a distinctly different mantle transition zone compared to the present-day Earth (Hirose, 2002; Stixrude and Lithgow-Bertelloni, 2011; Ichikawa et al., 2014; Dannberg et al., 2022). Instead of olivine primarily transforming into its higher-pressure polymorphs such as Wadsleyite and then Ringwoodite, at pressures corresponding to 410km and 520km depth in Earth, respectively, it instead transforms into a mineral assemblage of Wadsleyite, Majorite, and Ferropericlase (WMF), and then to Majorite + Ferropericlase (MF), before finally transforming into Bridgmanite at pressures corresponding to 660km depth in Earth (Stixrude and Lithgow-Bertelloni, 2011; Ichikawa et al., 2014). Convective motions in stagnant lid planets are dominated by small-scale instabilities (cold drips) forming within the mobile rheological sublayer under the rigid lid. Using ASPECT and a thermodynamic model of a pyrolitic mantle composition generated by HeFESTo, we show that under certain conditions, the small drips can pond atop the WMF-MF mineral phase transition. The barrier to convective flow arises from an exotic property of WMF assemblage having a negative thermal expansivity. In contrast to mobile lid planets that recycle their entire lithosphere via large-scale downwellings which pass through the WMF zone without difficulty (Dannberg et al., 2022; Li et al., 2024), the WMF zone in stagnant lid planets is capable of causing an ephemeral layering of the mantle. Our numerical models show that in stagnant lid planets with mantle potential temperatures that exceed 1900K, the smaller, cold drips from the lid continue to pile up until enough of them have coalesced that they collectively avalanche as a larger instability into the deeper interior.
- 30 June 2024
- Published by California Digital Library (CDL) in EarthArXiv
Open AccessMantle avalanches in a Venus-like stagnant lid planet
Stagnant lid planets are characterized by a globe-encircling, conducting lid that is thick and strong, which leads to reduced global surface heat flows. Consequently, the mantles of such planets can have warmer interiors than Earth, and interestingly, a pyrolitic mantle composition under warmer conditions is predicted to have a distinctly different mantle transition zone compared to the present-day Earth (Hirose, 2002; Stixrude and Lithgow-Bertelloni, 2011; Ichikawa et al., 2014; Dannberg et al., 2022). Instead of olivine primarily transforming into its higher-pressure polymorphs such as Wadsleyite and then Ringwoodite, at pressures corresponding to 410km and 520km depth in Earth, respectively, it instead transforms into a mineral assemblage of Wadsleyite, Majorite, and Ferropericlase (WMF), and then to Majorite + Ferropericlase (MF), before finally transforming into Bridgmanite at pressures corresponding to 660km depth in Earth (Stixrude and Lithgow-Bertelloni, 2011; Ichikawa et al., 2014). Convective motions in stagnant lid planets are dominated by small-scale instabilities (cold drips) forming within the mobile rheological sublayer under the rigid lid. Using ASPECT and a thermodynamic model of a pyrolitic mantle composition generated by HeFESTo, we show that under certain conditions, the small drips can pond atop the WMF-MF mineral phase transition. The barrier to convective flow arises from an exotic property of WMF assemblage having a negative thermal expansivity. In contrast to mobile lid planets that recycle their entire lithosphere via large-scale downwellings which pass through the WMF zone without difficulty (Dannberg et al., 2022; Li et al., 2024), the WMF zone in stagnant lid planets is capable of causing an ephemeral layering of the mantle. Our numerical models show that in stagnant lid planets with mantle potential temperatures that exceed 1900K, the smaller, cold drips from the lid continue to pile up until enough of them have coalesced that they collectively avalanche as a larger instability into the deeper interior.
- Open Access
- 23 July 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (7) , 7387-7412
Formation and Stability of Same‐Dip Double Subduction Systems
A specific configuration of the global subduction system is the “same‐dip” double subduction, which occurs when two parallel subduction zones dip in the same direction. Double subduction convergence rates can be significantly faster than across single subduction systems because of pull by two slabs. However, questions regarding double subduction remain largely unexplored in terms of factors controlling its initiation, duration, and dynamics. In this study, we perform numerical simulations to investigate (i) subduction initiation of a secondary system in a mature single subduction system and (ii) the dynamics and stability of the newly formed system. We start from a single subduction setup, where subduction is already initiated and we stress the system by controlling the convergence rate. Two sets of models (Model A—upper mantle and Model B—deep mantle) are performed, and we compare our results to single and double subduction systems. We find that the forcing needs to overcome the right (front) subduction rate in order to obtain a self‐sustaining double subduction system. However, once initiation of double subduction is successful, the left (rear) subduction dominates the dynamics of the system until simulations reach a steady state with convergence speed‐ups of 2.5 relative to single subduction. Our model results are consistent with previous findings in that convergence rates across double subduction are higher than across single subduction, elevated dynamic pressures are accumulated in between the two slabs, or that the left trench advances while the right trench retreats. Finally, we find that upper mantle models create artificially high pressures in between slabs.
- 23 July 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (7) , 7387-7412
Open AccessFormation and Stability of Same‐Dip Double Subduction Systems
A specific configuration of the global subduction system is the “same‐dip” double subduction, which occurs when two parallel subduction zones dip in the same direction. Double subduction convergence rates can be significantly faster than across single subduction systems because of pull by two slabs. However, questions regarding double subduction remain largely unexplored in terms of factors controlling its initiation, duration, and dynamics. In this study, we perform numerical simulations to investigate (i) subduction initiation of a secondary system in a mature single subduction system and (ii) the dynamics and stability of the newly formed system. We start from a single subduction setup, where subduction is already initiated and we stress the system by controlling the convergence rate. Two sets of models (Model A—upper mantle and Model B—deep mantle) are performed, and we compare our results to single and double subduction systems. We find that the forcing needs to overcome the right (front) subduction rate in order to obtain a self‐sustaining double subduction system. However, once initiation of double subduction is successful, the left (rear) subduction dominates the dynamics of the system until simulations reach a steady state with convergence speed‐ups of 2.5 relative to single subduction. Our model results are consistent with previous findings in that convergence rates across double subduction are higher than across single subduction, elevated dynamic pressures are accumulated in between the two slabs, or that the left trench advances while the right trench retreats. Finally, we find that upper mantle models create artificially high pressures in between slabs.
- 7 April 2013
- Published by Springer Nature in Nature Geoscience
- Vol. 6 (5) , 395-399
Bifurcation of the Yellowstone plume driven by subduction-induced mantle flow
- 7 April 2013
- Published by Springer Nature in Nature Geoscience
- Vol. 6 (5) , 395-399
Bifurcation of the Yellowstone plume driven by subduction-induced mantle flow
- 15 February 2012
- Published by Springer Nature in Nature
- Vol. 482 (7385) , 386-389
Origin of Columbia River flood basalt controlled by propagating rupture of the Farallon slab
The origin of the Steens-Columbia River (SCR) flood basalts, which is presumed to be the onset of Yellowstone volcanism, has remained controversial, with the proposed conceptual models involving either a mantle plume or back-arc processes. Recent tomographic inversions based on the USArray data reveal unprecedented detail of upper-mantle structures of the western USA and tightly constrain geodynamic models simulating Farallon subduction, which has been proposed to influence the Yellowstone volcanism. Here we show that the best-fitting geodynamic model depicts an episode of slab tearing about 17[thinsp]million years ago under eastern Oregon, where an associated sub-slab asthenospheric upwelling thermally erodes the Farallon slab, leading to formation of a slab gap at shallow depth. Driven by a gradient of dynamic pressure, the tear ruptured quickly north and south and within about two million years covering a distance of around 900[thinsp]kilometres along all of eastern Oregon and northern Nevada. This tear would be consistent with the occurrence of major volcanic dikes during the SCR-Northern Nevada Rift flood basalt event both in space and time. The model predicts a petrogenetic sequence for the flood basalt with sources of melt starting from the base of the slab, at first remelting oceanic lithosphere and then evolving upwards, ending with remelting of oceanic crust. Such a progression helps to reconcile the existing controversies on the interpretation of SCR geochemistry and the involvement of the putative Yellowstone plume. Our study suggests a new mechanism for the formation of large igneous provinces.
- 15 February 2012
- Published by Springer Nature in Nature
- Vol. 482 (7385) , 386-389
Origin of Columbia River flood basalt controlled by propagating rupture of the Farallon slab
The origin of the Steens-Columbia River (SCR) flood basalts, which is presumed to be the onset of Yellowstone volcanism, has remained controversial, with the proposed conceptual models involving either a mantle plume or back-arc processes. Recent tomographic inversions based on the USArray data reveal unprecedented detail of upper-mantle structures of the western USA and tightly constrain geodynamic models simulating Farallon subduction, which has been proposed to influence the Yellowstone volcanism. Here we show that the best-fitting geodynamic model depicts an episode of slab tearing about 17[thinsp]million years ago under eastern Oregon, where an associated sub-slab asthenospheric upwelling thermally erodes the Farallon slab, leading to formation of a slab gap at shallow depth. Driven by a gradient of dynamic pressure, the tear ruptured quickly north and south and within about two million years covering a distance of around 900[thinsp]kilometres along all of eastern Oregon and northern Nevada. This tear would be consistent with the occurrence of major volcanic dikes during the SCR-Northern Nevada Rift flood basalt event both in space and time. The model predicts a petrogenetic sequence for the flood basalt with sources of melt starting from the base of the slab, at first remelting oceanic lithosphere and then evolving upwards, ending with remelting of oceanic crust. Such a progression helps to reconcile the existing controversies on the interpretation of SCR geochemistry and the involvement of the putative Yellowstone plume. Our study suggests a new mechanism for the formation of large igneous provinces.