OBOleksii Basmanov

Oleksii Basmanov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Oleksii Basmanov has a total of 78 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Building a model of early fire detection using machine learning methods and satellite imagery

    by Oleksii Basmanov, Serhii Ohurtsov, Roman Ponomarenko, Andrii Khyzhniak, Oleksandr Lysenko, Yevhen Ryzhkov, Dmytro Chalyy, Iryna Chala, Anastasiia Hryshchenko

    This work investigates the process of early fire detection by anomalous sources of thermal radiation registered by satellite remote sensing systems of the Earth. The subject of this study is anomalous sources of thermal radiation and their affiliation to an actual fire. The need for research is due to the fact that not every thermal anomaly recorded by a satellite corresponds to a real fire. Data on thermal anomalies were combined with the results of their ground verification in the Poltava oblast (Ukraine) in the period from 09/22/2020 to 04/23/2025. As a result of the combination, carried out on the basis of spatial and temporal proximity of points, 5096 clusters were established. At the same time, the share of clusters with confirmed fires was 13.0%. Each cluster was characterized by a set of 31 features, including spatial and temporal dimensions of the cluster, type of land cover, thermal radiation indicators, and meteorological indicators. A model has been built that determines the probability of a fire in a cluster for a given set of features. Using the method of recursive feature exclusion and a genetic algorithm, a set of 16 features was assembled, optimal according to the criterion of maximization of the PR AUC (Precision-Recall Area Under the Curve) metric. A binary classifier has been built to identify fires among thermal anomalies. A feature of the model is its training on the results from ground verification of such anomalies. The model captures 85% of actual fires at a false detection rate of 54%. In practice, this opens up opportunities for early detection of fire sites by ranking the detected sources of anomalous thermal radiation according to the criterion of fire probability. This makes it possible to improve the efficiency of using available forces and resources

  • Theoretical Aspects of the Application of Compressed Air Foam Generated from a Sodium Polyacrylate-Based Fire Extinguishing Agent for High-Rise Firefighting

    by Igor Stylyk, Maksym Osadchuk, Oleksii Basmanov, Sergii Zhartovskyi

    This article investigates the features of the generation and application of compressed air foam, obtained from an aqueous sodium polyacrylate-based fire extinguishing agent, for firefighting operations, particularly concerning the delivery of extinguishing agents to elevated heights. The relevance of this study is driven by the need to improve the efficiency of firefighting in high-rise buildings. The paper examines an experimental setup for producing compressed air foam, which ensures the formation of a foam stream using compressed air and an aqueous solution of a gelling agent. Experimental studies of the physical characteristics of the generated foam were conducted; specifically, its density, expansion ratio, stability, and formation parameters were determined depending on the concentration of the polymer component. It was established that introducing sodium polyacrylate into the fire extinguishing agent increases the solution's viscosity, promotes the formation of a more stable foam structure, and enhances its water retention capacity. Based on the obtained experimental data, the parameters for the vertical delivery of the generated compressed air foam were calculated. It is demonstrated that using the developed setup in combination with the modified aqueous fire extinguishing agent allows for the formation of stable compressed air foam with improved performance characteristics, thereby expanding its application capabilities for high-rise firefighting purposes

  • Open Access

    Construction of a model of the impact interaction between a water jet and a vertical wall

    by Oleksii Basmanov, Volodymyr Oliinyk, Oleksandr Telelym, Dmytro Chalyy, Iryna Chala, Vasyl Maliarchuk, Anastasiia Hryshchenko, Artem Huz

    This work investigates the process of interaction between the droplet phase of a two-phase flow "droplet-air" and a vertical wall; the subject of this study is the trajectory of motion and characteristics of water droplets in a two-phase flow when they collide with a vertical surface. The task addressed is to reduce water losses when it is supplied by a fire hose to a vertical wall while splashing upon impact. The droplet motion was modeled within the framework of the Lagrangian approach, in which the dynamics of each droplet were described by the equations of motion in three-dimensional space taking into account the forces of aerodynamic resistance and gravity. To take into account the stochastic nature of droplet sizes and transverse velocity components, 105 trajectories with diameter distribution according to the Rosin-Ramler law were simulated. It was established that the density distribution of a water particle reaching the vertical wall has a unimodal character. With increasing water supply pressure, the fraction of water reaching the wall increases significantly, and the maximum of the distribution density becomes more pronounced. In particular, when water is supplied by a fire hose with a nozzle diameter of 19 mm at an angle of 35° from a distance of 25 m, the fraction of water that does not reach the wall decreases from 49% at a pressure of 40 m to 8% at a pressure of 70 m. It is shown that the interaction of droplets with the wall occurs mainly under the spreading and splashing modes, while the deposition and reflection modes account for less than 1%. With increasing pressure, the fraction of spreading droplets decreases, and the fraction of splashing droplets increases. Under the splashing mode, on average, about 50% of the drop mass is lost. As a result of taking splashing into account, the water distribution density along the vertical wall changes from unimodal to bimodal, where the second maximum corresponds to the zone of predominant droplet spreading

  • Open Access

    Determining a priori estimate of error in the thermal protection of gas generator in a hydrogen storage and supply system

    by Yuriy Abramov, Oleksii Basmanov, Valentina Krivtsova, Andriy Mikhayluk, Oleg Bogatov, Vitalii Sobyna, Ihor Neklonskyі, Roman Chernysh

    This study investigates a gas generator for a hydrogen storage and supply system with a heat-shielding coating. The subject is the properties of the heat-shielding coating of the gas generator for a hydrogen storage and supply system under fire conditions. The properties of such a heat-shielding coating are taken into account by the thermal protection error of the thermodynamic system, which includes the heat-shielding coating and the gas generator wall. To describe the dynamic properties of the thermodynamic system in the frequency domain, amplitude-phase frequency characteristics and their components – amplitude-phase and phase-frequency characteristics – are used. The frequency characteristics of the thermodynamic system have been mathematically described in general form. It is shown that for the characteristic values of parameters for the thermodynamic system, its properties are fully reflected using frequency characteristics in the frequency range (0÷1.0) s-1 at a bandwidth of 0.02 s-1. The thermal effect of fire on the thermal state of the cavity of the gas generator of the hydrogen storage and supply system is taken into account using exponential-type correlation functions. Thermal interference is "white noise". Under these conditions and using the amplitude-frequency characteristics of the thermodynamic system, mathematical models of the components of the error of the thermal protection of the gas generator were built in general form. As an indicator characterizing the error of the thermal protection of the gas generator, its root mean square value was used. It is shown that for real fire conditions and operation of hydrogen storage and supply systems, the root mean square error of the thermal protection of the gas generator is 5.14°C. In practice, the existence of such an error estimate opens up the possibility for improving the reliability in determining the thermal protection for a gas generator.

  • Open Access

    Modeling the heating of an oil product tank under fire exposure from adjacent tanks in a tank group

    by Олексій Басманов, Дарина Карпова, Вадим Бенедюк, Олександр Зазимко, Володимир Забаровський, Vadym Benediuk, Volodymyr Zabarovskiy

    The object of this study is the thermal processes occurring in a vertical steel tank containing petroleum products under the thermal influence of fires in several neighboring tanks within a tank group. To determine the temperature distribution over the tank surface and to calculate the time required for the wall or roof to reach the autoignition temperature of the stored liquid, the heat balance equations for the tank wall and roof were applied. The model accounts for radiative heat transfer from the fire, as well as radiative and convective heat exchange with the environment and the internal space of the tank. The radiating flame surface is modeled as a conical surface whose base expands leeward, and whose axis tilts when the wind speed exceeds a certain threshold. Fire scenarios involving a tank group of four identical tanks are considered. Using the example of RVS-10000 gasoline tanks, it is shown that a moderate wind speed – insufficient to tilt the flame axis – increases the heat flux to the tank and reduces the time required to reach hazardous temperature levels, even when the wind direction does not coincide with the direction from the fire to the target tank. In particular, at a wind speed of 2 m/s, the time to reach the autoignition temperature of gasoline vapors decreases by approximately 1.5 times compared to the calm conditions. At wind speeds sufficient to tilt the flame axis, the time to reach hazardous temperatures is significantly reduced if the wind tilts the flame toward the heated tank. At wind speeds above 4 m/s, this time decreases by 2–3 times. It is shown that when two tanks in a group are burning, the scenario in which the two burning tanks are located diagonally is more dangerous. The thermal impact of fires in three tanks is similar to that of two diagonally burning tanks, but the time for the remaining tank to reach critical temperatures is on average 20% shorter. The developed model can be used to identify the parts of the tank wall and roof that require cooling and to determine the maximum allowable time before initiating water cooling.

  • Побудова моделі нагріву стінки резервуара з нафтопродуктом, що горить

    by Oleksii Basmanov, Daryna Karpova, Vadim Benediuk, Oleksandr Zazymko, Maryna Volodchenko

    Побудовано математичну модель нагріву стінки вертикального сталевого резервуара з на-фтопродуктом, що горить. В основі моделі лежать рівняння теплового балансу для стінки резер-вуара та рівняння балансу тепла і маси нафтопродукту. Для частини стінки вище рівня нафтоп-родукту враховано теплообмін випромінюванням з полум’ям, поверхнею рідини і навколишнім середовищем, а також конвекційний теплообмін з парами нафтопродукту в газовому просторі резервуара і повітрям ззовні резервуара. Частина стінки нижче рівня нафтопродукту приймає участь в конвекційному теплообміні з рідиною і навколишнім повітрям. Зниження рівня нафтоп-родукту в резервуарі призводить до зменшення питомої масової швидкості вигорання внаслідок зменшення коефіцієнта взаємного опромінення між точками на поверхні рідини і полум’ям. Чи-сельне розв’язання системи диференціальних рівнянь дозволяє визначити розподіл температури по стінці резервуара в довільний момент часу. Показано, що найбільше нагрівається верхній край стінки. Зокрема, при горінні бензину, її температура досягає майже 800 ºC. При цьому най-більшу небезпеку становить нагрів верхнього краю стінки з підвітряного боку внаслідок додат-кового теплового потоку на зовнішню поверхню стінки від основи полум’я, що розширилася за межі резервуара внаслідок деформації полум’я вітром. Наприклад, при горінні бензину в верти-кальному сталевому резервуарі ємністю 5000 м3 і швидкості вітру 2 м/с температура вказаної частини стінки перевищує 950 ºC. Показано, що зменшення рівня нафтопродукту призводить до зменшення довжини полум’я. Відносне відхилення між розрахованою довжиною полум’я і зафі-ксованою в спостереженнях не перевищує 9 %. Отримані результати можуть бути використані для оцінювання теплового стану резервуарів, прогнозування можливості виникнення прогресу-ючого руйнування, а також для розроблення заходів протипожежного захисту в резервуарних парках.

  • Open Access

    Building a model of water jet motion exiting a fire hose

    by Oleksii Basmanov, Volodymyr Oliinyk, Oleh Zemlianskyi, Olexander Derevyanko, Daryna Karpova

    This study investigates the process of water jet motion in the air; the subject is the trajectory of motion and the velocity vector of water droplets in a two-phase "droplets-air" flow. The task addressed is to construct a model of water jet motion in the air, which would take into account its destruction and transformation into a stream of droplets. A model of water jet motion in the field of gravity after exiting the fire hydrant in the area of the jet core has been built. The jet expansion coefficient was experimentally determined to be 0.016. Estimates of the jet radius, water droplet velocity, and effective radius of the jet of trapped air at the boundary of the core zone and the droplet zone were constructed. The values obtained are the initial conditions for the model of the motion of the droplet and gas phases of the jet in the droplet zone. The droplet motion was modeled by using the Lagrangian approach, within which the dynamics of the motion of individual drops were considered, described by the equations of motion in three-dimensional space taking into account the forces of aerodynamic resistance and gravity. It was assumed that the distribution of the droplet diameter obeys the Rosin-Ramler law. A model of the motion of the gas phase of the jet was constructed, based on the equations of mass and momentum balance; it also takes into account the curvature of the jet axis due to the capture of air by drops moving under the action of gravity. The model is based on the assumption of the axisymmetric nature of the jet and the Gaussian velocity distribution in its cross section. A feature of the model is the mutual influence of the droplet and gas phases of the jet on the motion of each other: drops, losing momentum due to aerodynamic resistance, give it to the air. It is shown that drops of smaller diameter have a shorter range compared to drops of larger diameter. As a result, the water falls to the ground not at a specific point but in a certain range. In particular, for a fire hose with a diameter of 19 mm, a delivery angle of 35° to the horizon and a water pressure of (40÷70) m, the width of the range into which 90% of the water falls was (8.7÷11.0) m


  • Open Access

    МОДЕЛЬ НАГРІВУ РЕЗЕРВУАРА З НАФТОПРОДУКТОМ ПІД ТЕПЛОВИМ ВПЛИВОМ ПОЖЕЖІ В СУСІДНЬОМУ РЕЗЕРВУАРІ

    by Олексій Басманов, Дарина Карпова, Сергій Гарбуз, Марина Володченко

    Об’єктом дослідження є теплові процеси, що мають місце в вертикальному сталевому резервуарі з нафтопродуктом в умовах теплового впливу пожежі в сусідньому резервуарі. Побудовано рівняння теплового балансу для стінки і покрівлі резервуара, які являють собою двовимірні рівняння теплопровідності, в яких враховано променевий і конвекційний теплообмін з пожежею, навколишнім середовищем, рідиною в резервуарі і пароповітряною сумішшю в його газовому просторі. Такий підхід є можливим внаслідок значно меншої товщини стінок резервуара порівняно з його лінійними розмірами. Розраховано коефіцієнти взаємного опромінення різних частин резервуара з полум’ям та між собою, що дозволило визначити променеві складові теплових потоків. Для визначення конвекційних складових було використано методи теорії подібності для побудови оцінок коефіцієнтів конвекційного теплообміну. Застосування методу скінчених різниць для чисельного розв’язання системи диференціальних рівнянь з відповідними крайовими і початковими умовами дозволяє визначити розподіл температури по стінці і покрівлі резервуара в довільний момент часу. Показано, що найбільшій небезпеці піддається верхній край стінки резервуара, обернений в бік пожежі. Це пов’язано як з більшим значенням коефіцієнта взаємного опромінення з полум’ям, так і з відсутністю контакту з рідиною в резервуарі. Зокрема, у випадку пожежі в одному з резервуарів резервуарної групи з чотирьох резервуарів РВС-10000 з дизельним пальним верхній край сусіднього резервуара, розташованого з підвітряного боку, досягає температури самоспалахуваня парів дизельного пального вже через 10 хв. після початку пожежі. При цьому температура стінки резервуара нижче рівня нафтопродукту не перевищує 70 ºC. Температура покрівлі резервуара за цей час також не досягає критичного значення, складаючи близько 200 ºC. Побудована модель може бути використана для визначення частин стінки і покрівлі резервуара, які підлягають охолодженню, а також визначення граничного часу початку подачі води на охолодження.

  • Open Access

    Determining the fireproof limit for the heat protective coating of the gas generator in a hydrogen storage and supply system

    by Yuriy Abramov, Oleksii Basmanov, Valentina Krivtsova, Andriy Mikhayluk, Yevhen Makarov, Volodymyr Abrakitov

    This work considers the task to prevent fires in hydrogen storage and operation systems. The subject of the study is the properties of the heat-protective coating of the gas generator in the hydrogen storage and supply system. The fire resistance limit is used as such a property. The set of heat-protective coating and the wall of the gas generator is considered as a thermodynamic system with two inputs. The signal at one input reflects the influence of thermal factors of the fire, and the signal at the second input corresponds to the thermal state of the gas generator cavity. A mathematical description of such a thermodynamic system has been constructed, which is represented in operator form using the integral Laplace transform. A feature of such a mathematical notation is that it includes hyperbolic functions of an irrational argument. An approximation of mathematical models of the thermodynamic system was carried out and it is shown that these models, which are transfer functions, belong to fractional-rational functions with third-order Hurwitz polynomials. The approximation accuracy is 3.8%. An expression for the reaction of a thermodynamic system has been derived, provided that the influence of thermal factors of a fire is described by an arbitrary function of time, and the thermal state of the gas generator cavity is described by the Heaviside function. To construct this expression, the Borel theorem and auxiliary functions are used, the parameters of which are the parameters of the roots of the algebraic Hurwitz equation. Examples of determining the fire resistance limit for the heat-protective coating of the gas generator in the hydrogen storage and supply system for the characteristic conditions of its operation are given. It is shown that the fire resistance limit of such a coating is 462.8 s at a critical temperature of 320°C under the condition that the influence of thermal factors of a fire is linear (the generalized temperature change rate is 2.0°C s-1). In this case, the thermal state of the gas generator cavity is stationary and is characterized by a temperature of 60°C

  • Determining the minimum water pressure for supplying it for cooling the tank

    by Oleksii Basmanov, Volodymyr Oliinik, Evgen Morshch, Yaroslav Kalchenko

    A model of the water jet motion after exiting the fire nozzle has been constructed. The model is based on a system of linear homogeneous and linear inhomogeneous 2nd-order differential equations with initial conditions that describe the motion of an elementary volume of water in a gravitational field and take into account air drag. Their solving with the initial conditions gives the trajectory of the water jet motion depending on the horizontal and vertical components of the initial jet velocity. The dependence of the water pressure on the horizontal component of the water jet velocity at the fire nozzle provided that the jet reaches a given point on the tank shell has been constructed. It is shown that the dependence is a downward convex function with a single minimum point. Only one trajectory of the jet motion corresponds to the minimum water pressure, which reaches a given point. An increase in the pressure leads to the appearance of two possible trajectories, one of which is grazing, and the other can be grazing or flat. It is shown that the condition for the trajectory to be flat is that the horizontal component of the velocity exceeds a certain limit value that is proportional to the distance to the tank. An algorithm for determining the minimum water pressure for supplying to a given point on the tank shell by a flat trajectory is constructed. The algorithm uses Newton’s method to numerically solve the conditional optimization problem. It is shown that for a distance to the tank (5÷30) m the water pressure should be (23÷58) m for tanks 12 m high and (37÷70) m for tanks 18 m high. The obtained results can be used to determine the locations of fire nozzles for supplying water to cool tanks while developing a plan for localizing and eliminating fires in a oil tank storage and to reduce water losses due to the splattering of the jet after hitting the tank.