Ankur Pandya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ankur Pandya has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Prafulla K. Jha
8 shared publications- Prafulla Kumar Jha
The Maharaja Sayajirao University of Baroda
7 shared publications Keyur Sangani
4 shared publicationsNikunj Joshi
Institute of Science, Nirma University, Ahmedabad, India
3 shared publications- Satyam Shinde
Department of Physics, School of Energy Technology, Pandit Deendayal Energy University, Raysan, India
3 shared publications - Asha Adhiya
Institute for Plasma Research, Gandhinagar, India
2 shared publications
Latest Publications
- 29 October 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 745
Magnetic field controlled optical properties of armchair germanene nanoribbon
- 29 October 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 745
Magnetic field controlled optical properties of armchair germanene nanoribbon
- 13 October 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (10) , e70341
Realizing Piezoelectricity in Janus Nanowire by Green’s Function Approach
Researchers have recognized piezoelectricity as an electromechanical coupling between the pressure or stress applied to the active part of an electromechanical system (EMS) and the electric polarization it produces for more than three decades. Such a concept is effectively utilized in nanoelectromechanical systems (NEMS), the miniaturized counterpart of existing EMS, which exhibit novel characteristics and applications. In the present work, the novel Green’s function approach is demonstrated to investigate the induced piezoelectricity in one of the Janus materials, MoSSe 2 nanowire, by calculating the carrier transmission function of the system. Considering the shear modulus of MoSSe 2 , the variation in density is investigated as a function of both compressive and elongated impulsive pressure. The results and the methodology adopted in the present work will pave the way to analyze the working and behavior of NEMS at the nanoscale level. Proposed Green’s function‐based mathematical modeling provides a deeper understanding of the relation between the impulse to the MoSSe 2 nanowire and the transmission function with different deflections at different positions. These calculations are able to provide further help in understanding the mechanical vibrational properties of nanoresonators made of intercalated Janus materials.
- 13 October 2026
- Published by Wiley in Physica Status Solidi (b)
- Vol. 263 (10) , e70341
Realizing Piezoelectricity in Janus Nanowire by Green’s Function Approach
Researchers have recognized piezoelectricity as an electromechanical coupling between the pressure or stress applied to the active part of an electromechanical system (EMS) and the electric polarization it produces for more than three decades. Such a concept is effectively utilized in nanoelectromechanical systems (NEMS), the miniaturized counterpart of existing EMS, which exhibit novel characteristics and applications. In the present work, the novel Green’s function approach is demonstrated to investigate the induced piezoelectricity in one of the Janus materials, MoSSe 2 nanowire, by calculating the carrier transmission function of the system. Considering the shear modulus of MoSSe 2 , the variation in density is investigated as a function of both compressive and elongated impulsive pressure. The results and the methodology adopted in the present work will pave the way to analyze the working and behavior of NEMS at the nanoscale level. Proposed Green’s function‐based mathematical modeling provides a deeper understanding of the relation between the impulse to the MoSSe 2 nanowire and the transmission function with different deflections at different positions. These calculations are able to provide further help in understanding the mechanical vibrational properties of nanoresonators made of intercalated Janus materials.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-6
A Simple Device for Simultaneous Measurement of Stokes Polarization Parameters
This paper presents a simple Polarization Measuring Device (PMD) developed indigenously for the simultaneous measurement of Stokes polarization parameters. Most of standard Stokes parameters measuring techniques, particularly the one which uses wave retarder and linear polarizer, require at least half a rotation of either of polarization elements. Therefore, they cannot provide simultaneous measurement of Stokes parameters. Consequently, the time resolution of measurement is limited by rotation period of polarization optics and the functionality of measuring setup is limited to beams with constant polarization state. In this work, a new device has been presented which is capable of providing simultaneous measurement of beam intensities for both the constant as well as the time varying State of Polarization (SOP). It enables the estimation of first three Stokes parameters through four intensity measurements I (0°), I (90°), I (45°) and I (-45°). The functionality of PMD has been verified on a test bench by using various known polarization states and comparing the results with measurements made using a rotating linear polarizer/analyzer (RA). For each case, the parameters of polarization ellipse are deduced from the measured Stokes parameters. In addition to that, the corresponding polarization ellipses are constructed from the retrieved ellipse parameters. The ellipse parameters measured by PMD are compared with that measured using RA and the ellipses drawn from the PMD measurements are overlapped with that obtained using RA. The measurements made by RA are the reference measurements for finding the efficiency of PMD. The measurement accuracy of PMD is found to be ≤0.01 for values of axes a and b and it is ≤0.5° for orientation angle Ψ of polarization ellipse. As the accuracy of measurement is comparable to other polarization measuring instruments/setups, any optical arrangement for which measurement is polarization sensitive can use PMD for finding SOP. The main advantage of the PMD is it can measure all requisite parameters of polarization ellipse, which is the most useful presentation of any polarization state, and is capable of dealing with both the constant and time varying SOP.
- 9 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-6
A Simple Device for Simultaneous Measurement of Stokes Polarization Parameters
This paper presents a simple Polarization Measuring Device (PMD) developed indigenously for the simultaneous measurement of Stokes polarization parameters. Most of standard Stokes parameters measuring techniques, particularly the one which uses wave retarder and linear polarizer, require at least half a rotation of either of polarization elements. Therefore, they cannot provide simultaneous measurement of Stokes parameters. Consequently, the time resolution of measurement is limited by rotation period of polarization optics and the functionality of measuring setup is limited to beams with constant polarization state. In this work, a new device has been presented which is capable of providing simultaneous measurement of beam intensities for both the constant as well as the time varying State of Polarization (SOP). It enables the estimation of first three Stokes parameters through four intensity measurements I (0°), I (90°), I (45°) and I (-45°). The functionality of PMD has been verified on a test bench by using various known polarization states and comparing the results with measurements made using a rotating linear polarizer/analyzer (RA). For each case, the parameters of polarization ellipse are deduced from the measured Stokes parameters. In addition to that, the corresponding polarization ellipses are constructed from the retrieved ellipse parameters. The ellipse parameters measured by PMD are compared with that measured using RA and the ellipses drawn from the PMD measurements are overlapped with that obtained using RA. The measurements made by RA are the reference measurements for finding the efficiency of PMD. The measurement accuracy of PMD is found to be ≤0.01 for values of axes a and b and it is ≤0.5° for orientation angle Ψ of polarization ellipse. As the accuracy of measurement is comparable to other polarization measuring instruments/setups, any optical arrangement for which measurement is polarization sensitive can use PMD for finding SOP. The main advantage of the PMD is it can measure all requisite parameters of polarization ellipse, which is the most useful presentation of any polarization state, and is capable of dealing with both the constant and time varying SOP.
- 5 December 2022
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 147
Theoretical modelling of graphene system for nano-electromechanical resonator and force sensor
- 5 December 2022
- Published by Elsevier in Physica E: Low-dimensional Systems and Nanostructures
- Vol. 147
Theoretical modelling of graphene system for nano-electromechanical resonator and force sensor
- 10 November 2022
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 52 (2) , 1113-1120
Magnetic Field-Controlled Bandgap of a Phosphorene-Based PN-Device for Sensing Application
- 10 November 2022
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 52 (2) , 1113-1120
Magnetic Field-Controlled Bandgap of a Phosphorene-Based PN-Device for Sensing Application
- 16 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-7
Determination of Mueller Matrix for Metal Substrates by Stokes Polarimetry
This article focuses on a polarization measurement method based on Mueller calculus for determining the polarization properties of metal substrates. As the Mueller matrix of a medium provides all its polarization-altering properties, the presented method enables to predict the effect of any optically absorbing media on the polarization state of light beam. For the measurement, a polarized beam of light is reflected off the substrate under study and the change in state of polarization is measured in terms of Stokes parameters. Simple formulae have been derived to deduce the values of matrix elements from the measured Stokes parameters. The presented method facilitates determination of the optical properties of any absorbing medium even though the optical constants are unidentified. It has been validated by the estimation of Mueller matrix elements of a few metal reflectors (Cu, Al and SS304) using Fresnel’s equations and comparing the theoretical values with the experimentally determined values. It has been verified further by measuring the complex refractive index of a sample (brass: Cu–Zn alloy) using the principle angle method and comparing the results with that obtained by newly developed method. For the materials under study, the average absolute error in the measurement of matrix elements is found to be <0.01 and the standard deviation is <0.02. The main advantage of the method is that the polarization properties of any optically absorbing medium can be determined using a simple optical setup at any desired wavelength.
- 16 July 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-7
Determination of Mueller Matrix for Metal Substrates by Stokes Polarimetry
This article focuses on a polarization measurement method based on Mueller calculus for determining the polarization properties of metal substrates. As the Mueller matrix of a medium provides all its polarization-altering properties, the presented method enables to predict the effect of any optically absorbing media on the polarization state of light beam. For the measurement, a polarized beam of light is reflected off the substrate under study and the change in state of polarization is measured in terms of Stokes parameters. Simple formulae have been derived to deduce the values of matrix elements from the measured Stokes parameters. The presented method facilitates determination of the optical properties of any absorbing medium even though the optical constants are unidentified. It has been validated by the estimation of Mueller matrix elements of a few metal reflectors (Cu, Al and SS304) using Fresnel’s equations and comparing the theoretical values with the experimentally determined values. It has been verified further by measuring the complex refractive index of a sample (brass: Cu–Zn alloy) using the principle angle method and comparing the results with that obtained by newly developed method. For the materials under study, the average absolute error in the measurement of matrix elements is found to be <0.01 and the standard deviation is <0.02. The main advantage of the method is that the polarization properties of any optically absorbing medium can be determined using a simple optical setup at any desired wavelength.
- 14 June 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (9) , 5244-5249
Theoretical Insights on Bandgap Engineering for Nanoribbons of the 2D Materials Family with Co-Adatoms
- 14 June 2021
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 50 (9) , 5244-5249
Theoretical Insights on Bandgap Engineering for Nanoribbons of the 2D Materials Family with Co-Adatoms
- 17 April 2021
- Published by Springer Nature
- p. 207-217
Vibrational Characterization of Graphene Nano-ribbon Resonator
- 17 April 2021
- Published by Springer Nature
- p. 207-217
Vibrational Characterization of Graphene Nano-ribbon Resonator
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 567-570
Exploring structural, electronic, and optical properties of the bismuth based palladium chalcopyrite
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 47, 567-570
Exploring structural, electronic, and optical properties of the bismuth based palladium chalcopyrite