Jisheng Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jisheng Zhou has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Huaihe Song
Beijing University of Chemical Technology
15 shared publications Peng Liu
State Key Laboratory of Chemical Resource Engineering Beijing Key Laboratory of Electrochemical Process and Technology for Materials Technology National Engineering Research Center for Fuel Cell and Hydrogen Source Beijing University of Chemical Technology Beijing P. R. China
10 shared publicationsXiaohong Chen
State Key Laboratory of Chemical Resource Engineering, Beijing Key Laboratory of Electrochemical Process and Technology for Materials , Beijing University of Chemical Technology , Beijing 100029 , P. R. China
9 shared publicationsSitong Liu
8 shared publicationsDan Li
6 shared publications- Bin Luo
The University of Queensland
4 shared publications
Latest Publications
- Open Access
- 13 November 2026
- Published by Wiley in Advanced Materials
Molecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage
Closed pores are critical structural motifs that enable low‐voltage plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries, yet their controllable construction through precursor molecular design remains challenging. Herein, we demonstrate molecular bridging flexibility as an effective design principle for regulating closed‐pore formation in HCs. The flexibility/rigidity of polymer precursors is tailored by distinct bridging configurations, namely Ar─CH 2 ─Ar and Ar─O─C bridges, where oxygen‐containing bridges enhance segmental flexibility. During early‐stage pyrolysis, flexible precursor segments provide higher conformational freedom, inducing curved carbon skeletons and promoting the formation of semi‐open sub‐1 nm pores. Driven by high surface energy, these semi‐open pores undergo pore‐mouth closure during high‐temperature pyrolysis, generating abundant closed pores. The resulting HC exhibits a closed porosity of 0.12 cm 3 g −1 and a pore size 1.13 nm, which enhances plateau capacity and sodium‐ion diffusion kinetics. Consequently, the flexible‐precursor‐derived HC delivers a high reversible capacity of 356.1 mAh g −1 and a plateau capacity of 242.7 mAh g −1 . Moreover, a practical 1.2 Ah pouch cell achieves 217.2 Wh kg −1 and retains 81.2% of its initial capacity after 100 cycles at 0.5 C. This work establishes a molecular‐level strategy for closed‐pore engineering in HC anodes for high‐performance sodium‐ion batteries.
- 13 November 2026
- Published by Wiley in Advanced Materials
Open AccessMolecular Bridging Flexibility Enables Closed‐Pore Engineering in Hard Carbon for Enhanced Plateau Sodium Storage
Closed pores are critical structural motifs that enable low‐voltage plateau capacity in hard carbon (HC) anodes for sodium‐ion batteries, yet their controllable construction through precursor molecular design remains challenging. Herein, we demonstrate molecular bridging flexibility as an effective design principle for regulating closed‐pore formation in HCs. The flexibility/rigidity of polymer precursors is tailored by distinct bridging configurations, namely Ar─CH 2 ─Ar and Ar─O─C bridges, where oxygen‐containing bridges enhance segmental flexibility. During early‐stage pyrolysis, flexible precursor segments provide higher conformational freedom, inducing curved carbon skeletons and promoting the formation of semi‐open sub‐1 nm pores. Driven by high surface energy, these semi‐open pores undergo pore‐mouth closure during high‐temperature pyrolysis, generating abundant closed pores. The resulting HC exhibits a closed porosity of 0.12 cm 3 g −1 and a pore size 1.13 nm, which enhances plateau capacity and sodium‐ion diffusion kinetics. Consequently, the flexible‐precursor‐derived HC delivers a high reversible capacity of 356.1 mAh g −1 and a plateau capacity of 242.7 mAh g −1 . Moreover, a practical 1.2 Ah pouch cell achieves 217.2 Wh kg −1 and retains 81.2% of its initial capacity after 100 cycles at 0.5 C. This work establishes a molecular‐level strategy for closed‐pore engineering in HC anodes for high‐performance sodium‐ion batteries.
- Open Access
- 29 May 2026
- Published by Elsevier in SSRN Electronic Journal
Morphology and Dispersibility of Hollow Silica Nanoparticles Synthesized via Dihydric alcohol-Induced Destabilization of Poly(acrylic acid)-Ammonia Emulsion Droplet Templates
Highly-dispersible hollow silica nanoparticles (HSNPs) were synthesized using nanodroplets composed of polyacrylic acid (PAA) and aqueous ammonia as templates. The effects of various synthetic factors on the morphology and dispersibility of the HSNPs were investigated using a dihydric alcohol-ethanol mixed solvent, PAA with different molecular weights, and aqueous ammonia with different concentrations. The droplet morphology affected both the morphology and the dispersibility of the HSNPs synthesized using the templates. As the emulsion's stability decreased, the surface became non-uniform due to partial dissolution of the droplet surface, resulting in a reduced particle size. The HSNP shells reflected the droplet surface morphology and exhibited structural roughening. The rough shell structure captured more PAA from the template, thereby improving the HSNP dispersibility. HSNPs synthesized under unstable emulsion conditions maintained a zeta potential of -35mV over a wide pH range and were dispersed as 100nm particles without aggregation.
- 29 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMorphology and Dispersibility of Hollow Silica Nanoparticles Synthesized via Dihydric alcohol-Induced Destabilization of Poly(acrylic acid)-Ammonia Emulsion Droplet Templates
Highly-dispersible hollow silica nanoparticles (HSNPs) were synthesized using nanodroplets composed of polyacrylic acid (PAA) and aqueous ammonia as templates. The effects of various synthetic factors on the morphology and dispersibility of the HSNPs were investigated using a dihydric alcohol-ethanol mixed solvent, PAA with different molecular weights, and aqueous ammonia with different concentrations. The droplet morphology affected both the morphology and the dispersibility of the HSNPs synthesized using the templates. As the emulsion's stability decreased, the surface became non-uniform due to partial dissolution of the droplet surface, resulting in a reduced particle size. The HSNP shells reflected the droplet surface morphology and exhibited structural roughening. The rough shell structure captured more PAA from the template, thereby improving the HSNP dispersibility. HSNPs synthesized under unstable emulsion conditions maintained a zeta potential of -35mV over a wide pH range and were dispersed as 100nm particles without aggregation.
- Open Access
- 20 October 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Single atom activated multi-stage active sites for thoroughgoing sodium utilization
Atomically dispersed metals offer advantages in guiding sodium deposition, yet the effects of single atoms on their surrounding structures and the precise tuning of coordination-governed single-atom activity remain underexplored. Herein, carbon nanofiber films with tin single atoms anchored via a dynamic coordination mode (shifting from coordination with three nitrogen atoms and one oxygen atom to coordination with one nitrogen atom and three oxygen atoms) are developed to address these challenges. The tin atoms not only enhance the sodium-ion adsorption activity of their directly coordinated nitrogen and oxygen atoms but also activate remote carbon atoms. The activation capability is strongly dependent on coordination environment, with tin atoms coordinated to more nitrogen atoms exhibiting higher activity. As a result, the optimized tin–carbon host enables uniform sodium deposition and complete stripping, allowing symmetric cells to cycle stably for 1200 h at 100 mA cm−2 and 100 mAh cm−2 with 100% depth of discharge. Anode-free full cells pairing the tin-carbon host with a sodium vanadate phosphate cathode achieve 94% capacity retention after 700 cycles at 10 C (6 min).
- 20 October 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-13
Open AccessSingle atom activated multi-stage active sites for thoroughgoing sodium utilization
Atomically dispersed metals offer advantages in guiding sodium deposition, yet the effects of single atoms on their surrounding structures and the precise tuning of coordination-governed single-atom activity remain underexplored. Herein, carbon nanofiber films with tin single atoms anchored via a dynamic coordination mode (shifting from coordination with three nitrogen atoms and one oxygen atom to coordination with one nitrogen atom and three oxygen atoms) are developed to address these challenges. The tin atoms not only enhance the sodium-ion adsorption activity of their directly coordinated nitrogen and oxygen atoms but also activate remote carbon atoms. The activation capability is strongly dependent on coordination environment, with tin atoms coordinated to more nitrogen atoms exhibiting higher activity. As a result, the optimized tin–carbon host enables uniform sodium deposition and complete stripping, allowing symmetric cells to cycle stably for 1200 h at 100 mA cm−2 and 100 mAh cm−2 with 100% depth of discharge. Anode-free full cells pairing the tin-carbon host with a sodium vanadate phosphate cathode achieve 94% capacity retention after 700 cycles at 10 C (6 min).
- 28 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (52)
Achieving Superconformal Sodium Deposition on Carbon Nanofiber Film by Constructing Axial Oxygen Coordinated Copper Atomic Sites
Achieving superconformal deposition of metallic sodium on 3D matrices is a critical challenge for sodium metal batteries (SMBs). Herein, flexible 3D carbon nanofiber films anchored with axial O‐coordinated CuN 4 O 2 single‐atom sites (CuN 4 O 2 ‐CNF) by a ZnCl 2 ‐mediated thermal activation strategy is designed. Unlike conventional planar CuN 3 configurations obtained without ZnCl 2 , the axial O in CuN 4 O 2 sites exhibits a high density of states near the Fermi level, modulating the electronic structure of neighboring Cu and N. This lowers Na + adsorption energy, accelerates charge transfer and enhances electrolyte permeability, enabling superconformal sodium deposition. As a result, the CuN 4 O 2 ‐CNF achieves an ultra‐low nucleation overpotential of 10 mV, a coulombic efficiency of 99.92% over 8,000 h, and exceptional cycling stability exceeding 10,000 h in symmetric cells. The full coin cells paired with a Na 3 V 2 (PO 4 ) 3 cathode retain 89.5 mA h g −1 after 1,000 cycles at 1 A g −1 and deliver 80.3 mA h g −1 at 5 A g −1 , demonstrating superior rate capability. The pouch cells also maintain a stable capacity of 75.8 mA h g −1 after 150 cycles at 58.5 mA g −1 . These results highlight the transformative potential of axial‐coordination for designing high‐performance metal batteries, offering insights into interfacial dynamics and host architectures for next‐generation energy‐storage systems.
- 28 July 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (52)
Achieving Superconformal Sodium Deposition on Carbon Nanofiber Film by Constructing Axial Oxygen Coordinated Copper Atomic Sites
Achieving superconformal deposition of metallic sodium on 3D matrices is a critical challenge for sodium metal batteries (SMBs). Herein, flexible 3D carbon nanofiber films anchored with axial O‐coordinated CuN 4 O 2 single‐atom sites (CuN 4 O 2 ‐CNF) by a ZnCl 2 ‐mediated thermal activation strategy is designed. Unlike conventional planar CuN 3 configurations obtained without ZnCl 2 , the axial O in CuN 4 O 2 sites exhibits a high density of states near the Fermi level, modulating the electronic structure of neighboring Cu and N. This lowers Na + adsorption energy, accelerates charge transfer and enhances electrolyte permeability, enabling superconformal sodium deposition. As a result, the CuN 4 O 2 ‐CNF achieves an ultra‐low nucleation overpotential of 10 mV, a coulombic efficiency of 99.92% over 8,000 h, and exceptional cycling stability exceeding 10,000 h in symmetric cells. The full coin cells paired with a Na 3 V 2 (PO 4 ) 3 cathode retain 89.5 mA h g −1 after 1,000 cycles at 1 A g −1 and deliver 80.3 mA h g −1 at 5 A g −1 , demonstrating superior rate capability. The pouch cells also maintain a stable capacity of 75.8 mA h g −1 after 150 cycles at 58.5 mA g −1 . These results highlight the transformative potential of axial‐coordination for designing high‐performance metal batteries, offering insights into interfacial dynamics and host architectures for next‐generation energy‐storage systems.
- Open Access
- 23 July 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (40) , e2506756
Anchoring Unimolecular Metal Chloride as a Sterically Active Site for Conformal Zinc Electrodeposition
Aqueous zinc ion batteries are promising candidates for next‐generation energy storage systems. However, the practical application of zinc metal anodes is hindered by the challenge of uncontrollable zinc‐dendrite growth. Herein, axial‐coordinated manganese single atoms, anchored by N, Cl co‐coordinating on self‐standing carbon nanofibers, are designed to guide uniform Zn deposition. The MnCl 2 N 4 octahedral sites act as effective nucleation centers, significantly reducing the Zn adsorption energy of the carbon matrix, achieving a nucleation overpotential of 17 mV. The strong interaction between Zn and MnCl 2 N 4 sites stabilizes the initially adsorbed Zn 2+ through John‐Teller distortions, which in turn promotes subsequent zinc adsorption. In symmetric cells, the Mn‐modified carbon nanofiber electrodes exhibit excellent cycling stability with a lifespan of 200 h under a high current density of 20 mA cm −2 . Moreover, a full cell coupling a MnO 2 cathode with a Mn‐doped carbon nanofiber anode delivers outstanding cycling performance over 1400 cycles at 1 A g −1 . This work highlights the potential of axially coordinated single‐atom metals in regulating zinc deposition, offering a pathway toward durable and high‐performance ZIBs.
- 23 July 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (40) , e2506756
Open AccessAnchoring Unimolecular Metal Chloride as a Sterically Active Site for Conformal Zinc Electrodeposition
Aqueous zinc ion batteries are promising candidates for next‐generation energy storage systems. However, the practical application of zinc metal anodes is hindered by the challenge of uncontrollable zinc‐dendrite growth. Herein, axial‐coordinated manganese single atoms, anchored by N, Cl co‐coordinating on self‐standing carbon nanofibers, are designed to guide uniform Zn deposition. The MnCl 2 N 4 octahedral sites act as effective nucleation centers, significantly reducing the Zn adsorption energy of the carbon matrix, achieving a nucleation overpotential of 17 mV. The strong interaction between Zn and MnCl 2 N 4 sites stabilizes the initially adsorbed Zn 2+ through John‐Teller distortions, which in turn promotes subsequent zinc adsorption. In symmetric cells, the Mn‐modified carbon nanofiber electrodes exhibit excellent cycling stability with a lifespan of 200 h under a high current density of 20 mA cm −2 . Moreover, a full cell coupling a MnO 2 cathode with a Mn‐doped carbon nanofiber anode delivers outstanding cycling performance over 1400 cycles at 1 A g −1 . This work highlights the potential of axially coordinated single‐atom metals in regulating zinc deposition, offering a pathway toward durable and high‐performance ZIBs.
- 29 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (23) , 33783-33795
Boosting High-Temperature Durability of Industrial-Scale LiMn0.6Fe0.4PO4 Cathode through Niobium Doping
Renewable energy's growth of renewable energy drives the need for advanced lithium-ion batteries (LIBs). LiMn0.6Fe0.4PO4 (LMFP) cathode materials show promise but face challenges like the Jahn-Teller effect and metal dissolution, undermining structural stability and cycling performance, especially under elevated temperatures. This study pioneers the strategic doping of high-valence niobium (Nb5+) into LMFP to address these limitations. The Nb-doped LMFP cathodes were synthesized at an industrial scale using industrially viable coprecipitation and spray-drying methods. Nb is doped into the Li site with controllable atomic content from 0 to 3%. The introduction of Nb reduces antisite defects, accelerates lithium-ion diffusion, and effectively suppresses both the Jahn-Teller effect and manganese dissolution. Notably, the optimized Li1-xMn0.6Fe0.4Nbx@C cathode with 2% Nb exhibits remarkable high-temperature performance, retaining 95.07% of its capacity over 150 cycles at 60 °C and delivering a discharge capacity of 148.4 mAh g-1. These results underscore the transformative potential of Nb doping in overcoming thermal degradation, offering a compelling pathway for the development of robust, long-life LIB cathodes.
- 29 May 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (23) , 33783-33795
Boosting High-Temperature Durability of Industrial-Scale LiMn0.6Fe0.4PO4 Cathode through Niobium Doping
Renewable energy's growth of renewable energy drives the need for advanced lithium-ion batteries (LIBs). LiMn0.6Fe0.4PO4 (LMFP) cathode materials show promise but face challenges like the Jahn-Teller effect and metal dissolution, undermining structural stability and cycling performance, especially under elevated temperatures. This study pioneers the strategic doping of high-valence niobium (Nb5+) into LMFP to address these limitations. The Nb-doped LMFP cathodes were synthesized at an industrial scale using industrially viable coprecipitation and spray-drying methods. Nb is doped into the Li site with controllable atomic content from 0 to 3%. The introduction of Nb reduces antisite defects, accelerates lithium-ion diffusion, and effectively suppresses both the Jahn-Teller effect and manganese dissolution. Notably, the optimized Li1-xMn0.6Fe0.4Nbx@C cathode with 2% Nb exhibits remarkable high-temperature performance, retaining 95.07% of its capacity over 150 cycles at 60 °C and delivering a discharge capacity of 148.4 mAh g-1. These results underscore the transformative potential of Nb doping in overcoming thermal degradation, offering a compelling pathway for the development of robust, long-life LIB cathodes.
- Open Access
- 22 March 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (21) , e202501664
Biomimetic Localized Gel Electrolyte for Practical Zinc Anode
Incompatible electrode/electrolyte interface often leads to dendrite growth, parasitic reactions, and corrosion, posing significant challenges to the application of Zn anodes. Herein, we introduce a biomimetic antifreeze protein localized gel electrolyte (ALGE) with multifunctional capabilities to address these issues by combining electrolyte modification with interface optimization. ALGE modifies the Zn2+ solvation structure and the hydrogen‐bond network adjacent to the zinc anode, effectively suppressing hydrogen evolution. Additionally, ALGE promotes (002)Zn crystal plane‐dominated deposition by protein‐zinc surface interactions, enabling a long‐range dendrite‐free deposition. The absence of by‐products and inhibited corrosion further highlights the practical potential of ALGE. Symmetric cells with ALGE‐modified zinc demonstrate an impressive lifespan of 610 h under a current density of 10 mA cm−2 and a capacity of 10 mAh cm−2. The pouch cell integrating a manganese dioxide cathode and ALGE‐modified Zn anode retains 75.8% of its capacity after 200 cycles at 1 A g−1. This localized gel electrolyte strategy offers a practical and scalable approach to stabilizing Zn anodes for next‐generation energy storage systems.
- 22 March 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (21) , e202501664
Open AccessBiomimetic Localized Gel Electrolyte for Practical Zinc Anode
Incompatible electrode/electrolyte interface often leads to dendrite growth, parasitic reactions, and corrosion, posing significant challenges to the application of Zn anodes. Herein, we introduce a biomimetic antifreeze protein localized gel electrolyte (ALGE) with multifunctional capabilities to address these issues by combining electrolyte modification with interface optimization. ALGE modifies the Zn2+ solvation structure and the hydrogen‐bond network adjacent to the zinc anode, effectively suppressing hydrogen evolution. Additionally, ALGE promotes (002)Zn crystal plane‐dominated deposition by protein‐zinc surface interactions, enabling a long‐range dendrite‐free deposition. The absence of by‐products and inhibited corrosion further highlights the practical potential of ALGE. Symmetric cells with ALGE‐modified zinc demonstrate an impressive lifespan of 610 h under a current density of 10 mA cm−2 and a capacity of 10 mAh cm−2. The pouch cell integrating a manganese dioxide cathode and ALGE‐modified Zn anode retains 75.8% of its capacity after 200 cycles at 1 A g−1. This localized gel electrolyte strategy offers a practical and scalable approach to stabilizing Zn anodes for next‐generation energy storage systems.
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1577-1587
Utilizing MOFs Melt-Foaming to Design Functionalized Carbon Foams for 100% Deep-Discharge and Ultrahigh Capacity Sodium Metal Anodes
Meltable metal-organic frameworks (MOFs) offer significant accessibility to chemistry and moldability for developing carbon-based materials. However, the scarcity of low melting point MOFs poses challenges for related design. Here, we propose a MOFs melt-foaming strategy toward Ni single atoms/quantum dots-functionalized carbon foams (NiSA/QD@CFs). Melt-foaming highly depends on two factors: flexible metal-phosphorus bonds with cage-like ligands bridged in a zipper configuration via hydrogen bonds, facilitating MOFs conformational melting below 200 °C, and high annealing rates that lead to MOFs foaming by reducing the energy barrier and enhancing the pyrolysis enthalpy. When used as hosts for sodium metal anodes, foam structure regulates metallic Na to preferentially deposit inside the pores, while Ni SA and QD synergistically enhance Na absorption. Consequently, NiSA/QD@CF electrodes exhibit stable cyclic performance for 1000 h in symmetrical cells, with a low hysteresis voltage of 98 mV at 100 mA/cm2, 100 mAh/cm2, and 100% depth of discharge. Moreover, both full cells and anode-free ones exhibit excellent rate and cyclic performances. This strategy enriches the liquid MOFs family and their applications in mild-processing CFs for electrochemical energy storage.
- 23 December 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1577-1587
Utilizing MOFs Melt-Foaming to Design Functionalized Carbon Foams for 100% Deep-Discharge and Ultrahigh Capacity Sodium Metal Anodes
Meltable metal-organic frameworks (MOFs) offer significant accessibility to chemistry and moldability for developing carbon-based materials. However, the scarcity of low melting point MOFs poses challenges for related design. Here, we propose a MOFs melt-foaming strategy toward Ni single atoms/quantum dots-functionalized carbon foams (NiSA/QD@CFs). Melt-foaming highly depends on two factors: flexible metal-phosphorus bonds with cage-like ligands bridged in a zipper configuration via hydrogen bonds, facilitating MOFs conformational melting below 200 °C, and high annealing rates that lead to MOFs foaming by reducing the energy barrier and enhancing the pyrolysis enthalpy. When used as hosts for sodium metal anodes, foam structure regulates metallic Na to preferentially deposit inside the pores, while Ni SA and QD synergistically enhance Na absorption. Consequently, NiSA/QD@CF electrodes exhibit stable cyclic performance for 1000 h in symmetrical cells, with a low hysteresis voltage of 98 mV at 100 mA/cm2, 100 mAh/cm2, and 100% depth of discharge. Moreover, both full cells and anode-free ones exhibit excellent rate and cyclic performances. This strategy enriches the liquid MOFs family and their applications in mild-processing CFs for electrochemical energy storage.
- 4 April 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 666, 118-130
Surfactant-assisted molecular-level tunning of phenol-formaldehyde-based hard carbon microspheres for high-performance sodium-ion batteries
- 4 April 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 666, 118-130
Surfactant-assisted molecular-level tunning of phenol-formaldehyde-based hard carbon microspheres for high-performance sodium-ion batteries