PLPeng Li

Peng Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peng Li has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Atomically thin heterojunction-based optoelectronic synaptic devices operable from −190 °C to 450 °C

    by Yixuan Zou, Jiawen Yan, Haojie Zhao, Guangwei Hu, Zhongxu Hu, Wenlong Lu, Guangming Tao, Zheng You, Peng Li

    Exploration and operation in extreme environments (e.g., planetary surfaces) require hardware capable of sensing, storing, and processing visual information in situ, enabling intelligent perception under conditions inaccessible to humans. Optoelectronic synaptic devices (OSDs) are a promising class of such hardware, but existing OSDs fail under extreme temperatures, making thermal survivability a key bottleneck for extreme environment intelligent vision. Here, via the interface design of 2D-material heterostructures, we develop a MoS2-based OSD operating across a 640 °C range (from −190 °C to 450 °C) with tunable neuromorphic functionality. At 450 °C, the device achieves visible detection, bridging the spectral gap of high-temperature optical sensors. It exhibits highly tunable synaptic plasticity, with a retention tunability ratio exceeding reported high-temperature OSDs by 1600×. Leveraging bio-inspired scotopic and photopic visual adaptation, the device facilitates in-sensor processing, enhancing low-light image recognition accuracy by more than 15% across multiple datasets. A conceptual robotic rover demonstration illustrates its potential applications. This work provides a route toward robust, intelligent vision perception for planetary exploration and other extreme-environmental applications.


  • A Multi-Ion Super-Nernstian Sensing Platform Based on MoS 2 Near-Sensor Amplifiers

    by Haojie Zhao, Jiawen Yan, Yixuan Zou, Bo Wang, Peng Li

    Measuring multiple ions in biofluids with high sensitivity and repeatability is crucial for human healthcare monitoring. Ion-sensitive field-effect transistors have gained widespread interest for their advantages of being label-free, low cost, fast response, and CMOS-compatible fabrication processes. However, they suffer from limited voltage sensitivity, known as the Nernst limit. Current strategies for breaking the Nernst limit face problems of low integration level or unstable responses. Herein, we propose an inverter-based near-sensor amplifier to address these restrictions and realize a multi-ion super-Nernstian sensing platform with an extended-gate configuration by coupling a molybdenum disulfide (MoS2) inverter array with a multi-ion sensor chip. The high gain and stability of the MoS2 inverter array are attributed to the excellent electrical properties of MoS2, the low contact barrier between graphene and MoS2, and the defect-free surface of h-BN. The platform demonstrates super-Nernstian detection of pH (469.1 mV/pH), Na+ (472.7 mV/dec), K+ (269.4 mV/dec), and Ca2+ (221.2 mV/dec) levels within the biofluid range and exhibits stable long-term responses. Its practicality is further confirmed by selectivity investigations and artificial sweat analysis. The proposed platform is anticipated to play an important role in future point-of-care diagnostics, while this in situ amplification configuration is also expected to stimulate further near-sensor computing applications.


  • Scalable Integration of Lateral van der Waals Heterostructure Arrays via a Self-Aligned Approach

    by Jiawen Yan, Huiyi Zhang, Yixuan Zou, Haojie Zhao, Wenlong Lu, Peng Li

    Two-dimensional (2D) material lateral van der Waals heterostructures (vdWHs) have emerged as promising platforms for high-performance nano devices and the exploration of novel physical phenomena. However, their fabrication remains highly challenging owing to the difficulty of achieving nanoscale precision in material transfer and alignment. Here, we report a self-aligned fabrication method compatible with semiconductor manufacturing for the large-scale fabrication of 2D material lateral vdWH arrays. Using this approach, we realize over 800 lateral MoS2/graphene vdWHs on a 1 cm × 1 cm Si/SiO2 substrate. Compared with the vertical MoS2/graphene vdWH device, the lateral device shows a six-order-of-magnitude reduction in dark current density and a three-order-of-magnitude enhancement in the normalized photocurrent-to-dark-current ratio. The fabricated photodetector array features minimal device-to-device variation, a yield close to unity with high uniformity, and excellent imaging performance. This scalable strategy can be readily extended to other 2D materials, offering new opportunities for next-generation functional device design.


  • Open Access

    Magnetically actuated multimaterial fiberbot for precise minimally invasive knee laser surgery

    by Yuqi Zou, Yu Liu, Yang Li, Lvyun Yang, Yang Liu, Kaidong He, Yuanzhuo Xiang, Jingyu Ouyang, Pan Li, Jun Liang, et al.

    Conventional methods, such as open and arthroscopy-assisted surgery, still encounter challenges in terms of tool flexibility when addressing knee diseases in patients. Robotics has enhanced the precision and efficiency of numerous surgical procedures. However, there is still a lack of minimally invasive surgical tools capable of flexibly resecting knee lesions. Here, we present a flexible fiberbot that integrates steerable midinfrared laser ablation and active navigation functions. The fiberbot features an internal multicore structure for midinfrared laser delivery and an external magnetic elastomer, allowing precise control under an applied magnetic field. The fiberbot was demonstrated to perform precise navigation and steering in a constrained spherical model and an isolated pig knee joint. Moreover, the fiberbot was further demonstrated in steerable laser ablation for leg bones of rats in vivo. Given its compact design, safer actuation, and quicker manipulation, our fiberbot is expected to pave a promising avenue for future knee surgery.


  • A CIPS-based negative capacitance field-effect transistor biosensor with extended-gate structure

    by Caizhen Su, Haojie Zhao, Jiawen Yan, Yixuan Zou, Peng Li

    Biosensors based on field-effect transistor (FET) have advantages of label-free detection, rapid response, small size, and good compatibility with semiconductor manufacturing process. However, their sensitivities are limited by the Boltzmann distribution of electrons. Negative capacitance effect has the potential to address this challenge. Here, we realize two-dimensional (2D) van der Waals (vdW) heterojunction negative capacitance field-effect transistors (NCFETs) with MoS2 channel, CuInP2S6 ferroelectric layer, graphene contacts, hexagonal boron nitride dielectric layer, and graphene top gate. The devices exhibit excellent electrical performance with on–off ratio of 106 and subthreshold swing of 26 mV/dec. Due to the ultrasmall subthreshold swing value, the NCFET demonstrates a high pH detection sensitivity (675.8 pH−1), significantly outperforming the traditional 2D-material FET biosensors (445.5 pH−1). An extended-gate structure with TiN sensing membrane is connected with the MoS2 NCFET. This structure prevents leakage current between the solution and the gate dielectric, which can improve the stability of the biosensor. This work provides insights into the design of biochemical sensing platform. The observation of the negative capacitance effect in all-2D-material-based biosensor may stimulate further fundamental research and potential applications.


  • Open Access

    Zero-power infrared switch with two-phase microfluidic flow and a 2D material thermal isolation layer

    by Zekun Zhang, Peng Li, Yixuan Zou

    Wireless sensor nodes (WSNs) play an important role in many fields, including environmental monitoring. However, unattended WSNs face challenges in consuming power continuously even in the absence of useful information, which makes energy supply the bottleneck of WSNs. Here, we realized zero-power infrared switches, which consist of a metasurface and two-phase microfluidic flow. The metasurface can recognize the infrared signal from the target and convert it into heat, which triggers the two-phase microfluidic flow switch. As the target is not present, the switch is turned off. The graphene/MoS2/graphene 2D material heterostructure (thickness <2 nm) demonstrates an exceptionally high thermal resistance of 4.2 K/W due to strong phonon scattering and reduces the heat flow from the metasurface to the supporting substrate, significantly increasing the device sensitivity (the displacement of the two-phase microfluidic flow increases from ~1500 to ~3000 µm). The infrared switch with a pair of symmetric two-phase microfluidic flows can avoid spurious triggering resulting from environmental temperature changes. We realized WSNs with near-zero standby power consumption by integrating the infrared switch, sensors, and wireless communication module. When the target infrared signal appears, the WSNs are woken and show superb visual/auditory sensing performance. This work provides a novel approach for greatly lengthening the lifespan of unattended WSNs.


  • Open Access

    Optofluidic crystallithography for directed growth of single-crystalline halide perovskites

    by Xue-Guang Chen, Linhan Lin, Guan-Yao Huang, Xiao-Mei Chen, Xiao-Ze Li, Yun-Ke Zhou, Yixuan Zou, Tairan Fu, Peng Li, Zhengcao Li, et al.

    Crystallization is a fundamental phenomenon which describes how the atomic building blocks such as atoms and molecules are arranged into ordered or quasi-ordered structure and form solid-state materials. While numerous studies have focused on the nucleation behavior, the precise and spatiotemporal control of growth kinetics, which dictates the defect density, the micromorphology, as well as the properties of the grown materials, remains elusive so far. Herein, we propose an optical strategy, termed optofluidic crystallithography (OCL), to solve this fundamental problem. Taking halide perovskites as an example, we use a laser beam to manipulate the molecular motion in the native precursor environment and create inhomogeneous spatial distribution of the molecular species. Harnessing the coordinated effect of laser-controlled local supersaturation and interfacial energy, we precisely steer the ionic reaction at the growth interface and directly print arbitrary single crystals of halide perovskites of high surface quality, crystallinity, and uniformity at a high printing speed of 102 μm s−1. The OCL technique can be potentially extended to the fabrication of single-crystal structures beyond halide perovskites, once crystallization can be triggered under the laser-directed local supersaturation.


  • Flexible High-Temperature MoS2 Field-Effect Transistors and Logic Gates

    by Yixuan Zou, Peng Li, Caizhen Su, Jiawen Yan, Haojie Zhao, Zekun Zhang, Zheng You

    High-temperature-resistant integrated circuits with excellent flexibility, a high integration level (nanoscale transistors), and low power consumption are highly desired in many fields, including aerospace. Compared with conventional SiC high-temperature transistors, transistors based on two-dimensional (2D) MoS2 have advantages of superb flexibility, atomic scale, and ultralow power consumption. However, MoS2 cannot survive at high temperature and drastically degrades above 200 °C. Here, we report MoS2 field-effect transistors (FETs) with top/bottom hexagonal boron nitride (h-BN) encapsulation and graphene electrodes. With the protection of the h-BN/h-BN structure, the devices can survive at much higher temperature (≥500 °C in air) than those of the MoS2 devices ever reported, which provides us an opportunity to explore the electrical properties and working mechanism of MoS2 devices at high temperature. Unlike the relatively low-temperature situation, the on/off ratio and subthreshold swing of MoS2 FETs show drastic variation at elevated temperature due to the injection of thermal emission carriers. Compared with metal electrode, devices with a graphene electrode demonstrate superior performance at high temperature (∼1-order-larger current on/off ratio, 3-7 times smaller subthreshold swing, and 5-9 times smaller threshold voltage shift). We further realize that the flexible CMOS NOT gate based on the above technique, and demonstrate logic computing at 550 °C. This work may stimulate the fundamental research of properties of 2D materials at high temperature, and also creates conditions for next-generation flexible harsh-environment-resistant integrated circuits.


  • Open Access

    Near-zero-power infrared relay based on microfluidic switch and metamaterial absorber

    by Zekun Zhang, Jiawen Yan, Jiahao Zhao, Peng Li

    Internet of Things sensor nodes, which integrate information acquisition, processing, exchange, and execution modules, have widely been used for unattended industrial production, environmental monitoring, and other fields. However, limited battery power constrains the lifespan of the sensor nodes. In this paper, we propose a near-zero-power infrared relay consists of microfluidic switches and a metamaterial absorber (MA). When target appears, the MA absorbs the infrared energy emitted from the target and uses it to turn on the microfluidic switch. When valid information is not present, the microfluidic switch is in “off” state with a high resistance of over 109 Ω. The infrared relay with a pair of microfluidic switches shows common mode suppression capability against environmental temperature variation. We further demonstrate a sensor node consists of the infrared relay and a MoS2 photodetector. In a standby mode, the sensor node shows near-zero power consumption. As target infrared signal occurs, the photodetector is wakened by the infrared relay and illustrates excellent optical sensing performance. The simplicity of this approach provides a route for significantly extending the lifespan of sensor nodes powered by batteries, especially the sensor nodes for detecting infrequent but critical events.