Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Feng-Xue Liu has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Textile Pattern-Reconfigurable Antennas for 2.45 GHz Off-Body and On-Body Communications

    by Jie Cui, Jian-Peng Chen, Yu-Xuan Qi, Feng-Xue Liu, Le Zhang, Hong-Fei Liu, Lei Zhao

    Electrical radiation pattern reconfiguration for textile antennas using diode-based bias circuits is challenging, as most textile materials cannot withstand high soldering temperatures. Metallic snap buttons, widely used in garment manufacturing, can be readily integrated into textile antennas as mechanical pattern-reconfiguration switches. Accordingly, four sets of copper snap buttons are loaded on a square microstrip patch antenna (MPA). The antenna operates in fundamental patch and monopole modes under OFF and ON states, respectively, which yields distinct resonant frequencies for the two reconfigurable modes. Analysis of the simulated currents on the patch inspires two strategies to align both the patch-mode and monopole-mode resonant frequencies at 2.45 GHz. The first employs two parallel slots between the feeding probe and snap buttons to extend the monopole-mode current path while maintaining the patch-mode current path unchanged. The second increases the patch width to achieve similar current-path tuning. Two textile antennas are designed and fabricated following the two strategies. Simulations and prototype measurements validate the 2.45 GHz pattern reconfiguration of the two designs and further verify their robustness against human-body loading and bending deformation.

  • Open Access

    Textile Bandwidth-Enhanced Half-Mode Substrate-Integrated Cavity Antenna Based on Embroidered Shorting Vias

    by Feng-Xue Liu, Fan-Yu Meng, Yu-Jia Chen, Zhou-Hao Gao, Jie Cui, Le Zhang

    A textile bandwidth-enhanced half-mode substrate-integrated cavity (HMSIC) antenna based on embroidered shorting vias is designed. Based on the simulated results of the basic HMSIC antenna, two embroidered hollow posts with square cross-sections are added as shorting vias at the intersections of the zero-E traces of the TM210HM and TM020HM modes to shift the TM010HM-mode band to merge with the bands of the higher-order modes for bandwidth enhancement. A prototype is practically fabricated based on computerized embroidery techniques. Measurement results show that the prototype is of an expanded −10 dB impedance band of 4.87~6.17 GHz (23.5% fractional bandwidth), which fully covers the 5 GHz wireless local area network (WLAN) band. The simulated radiation efficiency and maximum gain of the proposed antenna are above 97% and 7.6 dBi, respectively. Furthermore, simulations and measurements prove its robust frequency response characteristic in the proximity of the human tissues or in bending conditions, and the simulations of the specific absorption rate (SAR) prove its electromagnetic safety on the human body.


  • Open Access

    Ultra-Compact Low-Pass Spoof Surface Plasmon Polariton Filter Based on Interdigital Structure

    by Zhou-Hao Gao, Xin-Shuo Li, Man Mao, Chen Sun, Feng-Xue Liu, Le Zhang, Lei Zhao

    An ultra-compact low-pass spoof surface plasmon polariton (SSPP) filter based on an interdigital structure (IS) is designed. Simulated dispersion curves show that adding the interdigital structure in an SSPP unit effectively reduces its asymptotic frequency compared with traditional and T-shaped SSPP geometries, and the unit dimensions can be conversely reduced. Based on that, three IS-based SSPP units are, respectively, designed with different maximum intrinsic frequencies and similar asymptotic frequencies to constitute the matching and waveguide sections of the proposed filter, and the unit number in the waveguide section is adjusted to improve the out-of-band suppression. Simulation results illustrate the efficient transmission in the 0~5.66 GHz passband, excellent out-of-band suppression (over 24 dB) in the 5.95~12 GHz stopband and ultra-shape roll-off at 5.74 GHz of the proposed filter. Measurement results on a fabricated prototype validate the design, with a measured cut-off frequency of 5.53 GHz and an ultra-compact geometry of 0.5 × 0.16 λ02.


  • Open Access

    Textile Bandwidth-Enhanced Polarization-Reconfigurable Half-Mode Substrate-Integrated Cavity Antenna

    by Feng-Xue Liu, Jie Cui, Fan-Yu Meng, Tian-Yu Jiang, Shao-Fei Yan, Shuai Chao, Lei Zhao

    A textile bandwidth-enhanced polarization-reconfigurable half-mode substrate-integrated cavity antenna was designed for wearable applications. A slot was cut out from the patch of a basic textile HMSIC antenna to excite two close resonances to form a wide −10 dB impedance band. The simulated axial ratio curve indicates the linear and circular polarization of the antenna radiation at different frequencies. Based on that, two sets of snap buttons were added at the radiation aperture to shift the −10 dB band. Therefore, a larger frequency range can be flexibly covered, and the polarization can be reconfigured at a fixed frequency by switching the state of snap buttons. According to the measured results on a fabricated prototype, the −10 dB impedance band of the proposed antenna can be reconfigured to cover 2.29~2.63 GHz (13.9% fractional bandwidth), and the circular/linear polarization radiation can be observed at 2.42 GHz with buttons OFF/ON. Additionally, simulations and measurements were carried out to validate the design and to study the effects of human body and bending conditions on the antenna performance.


  • Textile Bandwidth-Enhanced Half-Mode Substrate-Integrated Cavity Antenna With V-Slot for WLAN Communications

    by Feng-Xue Liu, Jie Cui, Jun Wang, Lei Zhao

    A textile bandwidth-enhanced half-mode substrate-integrated cavity (HMSIC) antenna is designed for the wireless local area network (WLAN) communications. Through simulations over the vector surface current on the top layer of a basic HMSIC antenna, a simple strategy of adding a slot on the top layer to shift the resonance frequency of the rotated TM $\mathrm{TM}_{2,2,0}^{HM}$ mode towards the counterpart of the fundamental TM $\mathrm{TM}_{2,2,0}^{HM}$ mode is presented. Based on that, the parameters of the slot are optimized to merge the two corresponding bands into one with an enhanced bandwidth. A prototype with a $0.35{\times }0.7\ {\lambda _{\varepsilon }^{2}}$ cavity is fabricated and measured to verify the design. The measured -10 dB impedance band is 5.04-5.90 GHz with a 15.7% factional bandwidth covering the 5 GHz WLAN band, and the radiation efficiency is above 94% in free space and 80% on the human body. Besides, the proposed antenna shows a high robustness against the human body and cylindrical bending conditions, and the simulated specific absorption rate (SAR) proves its safety on the human body.


  • Open Access

    Textile Bandwidth-Enhanced Coupled-Mode Substrate-Integrated Cavity Antenna with Slot

    by Jie Cui, Feng-Xue Liu, Xiaopeng Shen, Lei Zhao, Hongsheng Yin

    A textile bandwidth-enhanced coupled-mode substrate-integrated cavity antenna with a slot is presented. The original coupled-mode substrate-integrated cavity antenna is of two close resonances for the odd and even coupled modes, and a rectangular slot is added on the top layer to introduce a third resonance. Parameters are optimized to merge the bands of the three resonances to realize a widened −10 dB impedance band to cover the Medical Body Area Network band, 2.45 GHz Industrial Scientific Medical band and Long-Term Evolution Band7. The proposed antenna can operate in a −10 dB impedance band of 2.32–2.69 GHz with a 14.9% fractional bandwidth according to the measurements on a fabricated prototype. Simulation and measurement results illustrate the robustness of the proposed textile antenna in the vicinity of the human body and cylindrical bending conditions. In addition, the simulated specific absorption rate of the antenna radiation in the human body is lower than the IEEE and EN limits.


  • Textile Fixed-Frequency Pattern-Reconfigurable Coupled-Mode Substrate-Integrated Cavity Antenna

    by Jie Cui, Xue-Xue Liu, Lei Zhao, Wenbin Dou

    A textile fixed-frequency pattern-reconfigurable coupled-mode substrate-integrated cavity (CMSIC) antenna is designed for wearable applications. The H-plane beam directions of the basic CMSIC antenna in the odd and even modes are theoretically deduced. Metallic snap buttons are added at the radiation apertures as switches. Simulations indicate that changing the state of the buttons leads to the shift of the odd- and even-mode resonance frequencies, and thus leads to the mode/pattern reconfiguration at 2.45 GHz. A textile prototype is fabricated using the computerized embroidery and is measured to validate the design. The influences of human body and bending conditions are investigated through simulations and measurements.


  • Textile Via-Loaded Bandwidth-Enhanced Half-Mode Substrate-Integrated Cavity Antenna for WLAN Communications

    by Jie Cui, Feng-Xue Liu, Hongsheng Yin, Lei Zhao

    A textile via-loaded bandwidth-enhanced half-mode substrate-integrated cavity (HMSIC) antenna is presented in this article for wireless local area network (WLAN) communications. A strategy for adding shorting vias within the cavity is proposed based on the simulated ${E}$ -field distributions of different modes of the HMSIC antenna. More specifically, the number and positions of vias are studied for maximum shift of lower resonance ( $\rm TM_{1,1,0}^{HM}$ mode) so that it merges with higher resonance (rotated $\rm TM_{2,2,0}^{HM}$ mode) to achieve a wide 10 dB return loss impedance band. Two prototypes of the designed structure are realized using textile manufacture techniques. A first realization uses embroidered sidewalls to create the cavity and metallic rivets for the shorting vias, and a second prototype uses embroidered vias and a stripline feed. The proposed antenna can operate from 5.09 to 5.9 GHz with a fractional bandwidth of 14.7% according to measurements. The simulated radiation efficiency is above 95% in free space and 82% when worn on the human body in the 5 GHz WLAN band (5.15–5.825 GHz).


  • Textile Folded Half-Mode Substrate-Integrated Cavity Antenna

    by Feng-Xue Liu, Zhao Xu, Damith Chinthana Ranasinghe, Christophe Fumeaux

    The half-mode substrate-integrated cavity antenna is a promising candidate for wearable applications because of its planar structure and high isolation from environmental effects. However, for operation at 2.45-GHz ISM band, the cavity dimensions are relatively large. To reduce the antenna size in one of the dimensions, a folded half-mode substrate-integrated cavity antenna is proposed and designed. Furthermore, as an additional significant advantage for practical applications, the folded geometry allows a planar feeding structure using a shielded stripline. A prototype of the folded cavity antenna has been fabricated using textile materials and computerized embroidery. The measured reflection coefficient and radiation patterns of the prototype compare well with the simulation results and demonstrate the feasibility of the design.


  • Wearable Applications of Quarter-Wave Patch and Half-Mode Cavity Antennas

    by Feng-Xue Liu, Thomas Kaufmann, Zhao Xu, Christophe Fumeaux

    The quarter-wave patch and half-mode cavity antennas are two typical designs of half-size resonator antennas that are suitable for wearable applications. Despite their similar appearance, they have distinctively different properties. In this letter, the quarter-wave patch and rectangular half-mode cavity antennas are first theoretically analyzed with a cavity model to allow a direct comparison of size and internal field distribution. On that basis, wearable realizations of those two antennas using embroidered conductive shorting/side walls are investigated. It is demonstrated through full-wave simulations that the designs need to consider the resonance frequency stability against compression at seams, and that design optimization for both antennas will benefit from taking into account all expected bending conditions. With this procedure, the overall operational bandwidth over a range of bending conditions can be markedly improved, and a drift of the resonance frequency with bending can be mitigated. Realizations of the two antennas with conductive textiles and embroidered conductive threads for operation at 2.45 GHz validate the findings.