PCPaolo Cardelli

Paolo Cardelli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Paolo Cardelli has a total of 11 co-authors. Here are the top co-authors by number of shared publications:

  • Carlo Monaco

    Department of Biomedical Sciences and Neuromotor, Division of Prosthodontics, Alma Mater Studiorum University of Bologna, Bologna, Italy

    2 shared publications
  • Giovanna Murmura

    Aggregate Professor, Department of Medical, Oral and Biotechnological Sciences, Dental School, 'G. D'Annunzio' University of Chieti-Pescara, Chieti-Pescara, Italy

    2 shared publications
  • Mutlu Özcan

    Center for Dental Medicine, Clinic of Masticatory Disorders and Dental Biomaterials, University of Zurich, Zurich, Switzerland

    2 shared publications
  • Roberto Scotti

    2 shared publications
  • Bruna Sinjari

    Unit of Prosthodontics, Department of Innovative Technologies in Medicine and Dentistry, University “G. d’Annunzio” of Chieti-Pescara, 66100 Chieti, Italy

    1 shared publication
  • Carlo Monaco

    Division of Prosthodontics, Department of Oral Science, Alma Mater Studiorum, University of Bologna, Italy

    1 shared publication

Latest Publications

  • Immediate postextraction implant with simultaneous buccal plate augmentation, restored with lithium disilicate abutment and veneer: A clinical report

    by Paolo Cardelli, Milko Belletti, Giovanna Murmura

    To describe the successful use of biphasic calcium sulfate for improving the buccal plate thickness in an immediate postextraction implant, and its fi nal restoration with custom lithium disilicate abutment and veneer. A hopeless lateral incisor was replaced with an immediate postextraction implant in conjunction with a buccal plate augmentation based on biphasic calcium sulfate. Satisfactory soft tissue height and quality were maintained following healing. The fi nal restoration managed the severely reduced prosthetic space due to deep bite, and allowed an adhesive luting procedure.

    • 1 January 2012
      • Vol. 7  (1) , 48-60

    Inlay-retained zirconia fixed dental prosthesis: clinical and laboratory procedures.

    by Carlo Monaco, Paolo Cardelli, Michele Bolognesi, Roberto Scotti, Mutlu Ozcan

    Many treatment options are currently available for single tooth replacement, such as metal-ceramic, all-ceramic, direct or indirect fiber-reinforced composite fixed dental prostheses (FDPs) or implants. Inlay-retained FDPs could be indicated especially when adjacent teeth have preexisting restorations and where implant placement is not possible or not indicated. In such cases, indication of both metal-ceramic and fiber-reinforced composite FDPs has certain disadvantages. This paper describes the use of all-ceramic inlay-retained FDPs with zirconia frameworks, veneered with a press-on technique. The retainer margins were made of pressed ceramic to make adhesive luting possible. In deep cavities, a full contour press-on ceramic all around the retainers increased the available surface area for the adhesive approach.


  • Pilot Evaluation of Four Experimental Conditioning Treatments to Improve the Bond Strength between Resin Cement and Y-TZP Ceramic

    by Carlo Monaco, Paolo Cardelli, Roberto Scotti, Luiz Felipe Valandro

    This study evaluated the bond strength between resin cement and Y-TZP ceramic (Yttrium-stabilized Tetragonal Zirconia Polycrystalline) submitted to different surface conditionings. Fifty Y-TZP ceramic discs (Ø= 10 mm) were allocated into five groups: Gr1 (control)-no conditioning; Gr2-tribochemical silica coating (30-μm SiO(2)) before sintering; Gr3-air abrasion with 50-μm Al(2)O(3) before sintering; Gr4-air abrasion with 110-μ Al(2)O(3) before sintering; Gr5 - air abrasion with 50-μm Al(2)O(3) after sintering. After specimen preparation, cylinders of composite resin were prepared and immediately cemented onto the ceramic. A shear test was performed. One-way ANOVA indicated a statistically significant difference among the groups (p= 0.0019). The mean shear bond strengths (MPa) were: Gr1 = 4.7 ± 0.8,(b) Gr2 = 4.6 ± 0.9,(b) Gr3 = 6.4 ± 1.0,(a) Gr4 = 6.5 ± 1.8,(a) Gr5 = 6 ± 1.3(ab) (same superscript letter indicates statistical similarity). Adhesive fracture between the ceramic and resin cement was the most common failure. No complete cohesive fracture at the ceramic or composite cylinders was noted. Within the limitations of this study, additional surface treatment with air abrasion before and after sintering provided a significant increase in bond strength. Tribochemical silica coating before sintering was not effective as a surface treatment.


    • 1 January 2011
      • Vol. 77, b86

    Inlay-retained zirconia fixed dental prostheses: modified designs for a completely adhesive approach.

    by Carlo Monaco, Paolo Cardelli, Mutlu Ozcan

    Currently, there are many options for single-tooth replacement: metal-ceramic, all-ceramic, direct or indirect fibre-reinforced composite fixed dental prostheses (FDPs) or implants. Inlay-retained FDPs may especially be indicated when adjacent teeth have been previously restored and when implant placement is not possible or not indicated. In such cases, both metal-ceramic and fibre-reinforced composite FDPs have certain disadvantages. In this paper, we describe the use of all-ceramic inlay-retained FDPs with zirconia frameworks, veneered using a press-on technique.