Nguyen Lu Phuong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Nguyen Lu Phuong has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Kazuhide Ito
Faculty of Engineering Sciences, Kyushu University, Fukuoka 816-8580, Japan
8 shared publications - Nguyen Dang Khoa
Faculty of Engineering Sciences, Kyushu University, Fukuoka, Japan
6 shared publications Ji-Woong Kim
Korea Institute of Civil Engineering and Building Technology, Republic of Korea
2 shared publications- Kiao Inthavong
School of Engineering, RMIT University, Melbourne, Australia
2 shared publications Nguyen Dang Khoa
Department of Environmental Management, Faculty of Environment, University of Natural Resources and Environment, Ho Chi Minh City, Vietnam
2 shared publicationsTran Van Quang
University of Texas at San Antonio, Texas, United States of America
2 shared publications
Latest Publications
- Open Access
- 17 August 2026
- Published by Pensoft Publishers in ARPHA Preprints
- Vol. 7, e212051
Indoor Air Quality and PM2.5 Exposure in Schools Located in High-Density Residential and Traffic-Influenced Areas of Ho Chi Minh City
Air pollution in classrooms can pose significant health risks to children, as students spend a substantial portion of their day in these environments. This study aims to evaluate indoor air quality (IAQ) in primary and secondary schools in Ho Chi Minh City, Vietnam, with a focus on PM 2.5 exposure and its associated health impacts. Indoor PM 2.5 concentrations were continuously monitored using real-time air quality monitoring systems during both the dry and wet seasons. The results indicate that PM 2.5 concentrations frequently exceeded the World Health Organization (WHO) recommended thresholds, particularly in schools located in high-traffic areas. A respiratory deposition model was applied to estimate the inhaled dose of PM 2.5 among students, revealing increased exposure risks, especially during peak pollution periods in the dry season. Gender-related differences in PM 2.5 deposition were observed, with male students exhibiting higher exposure levels due to physiological factors. This study highlights spatial and temporal variations in classroom air quality and quantifies potential health risks to students. The findings contribute to a better understanding of IAQ disparities in educational environments and provide empirical evidence to support future research on effective mitigation strategies.
- 17 August 2026
- Published by Pensoft Publishers in ARPHA Preprints
- Vol. 7, e212051
Open AccessIndoor Air Quality and PM2.5 Exposure in Schools Located in High-Density Residential and Traffic-Influenced Areas of Ho Chi Minh City
Air pollution in classrooms can pose significant health risks to children, as students spend a substantial portion of their day in these environments. This study aims to evaluate indoor air quality (IAQ) in primary and secondary schools in Ho Chi Minh City, Vietnam, with a focus on PM 2.5 exposure and its associated health impacts. Indoor PM 2.5 concentrations were continuously monitored using real-time air quality monitoring systems during both the dry and wet seasons. The results indicate that PM 2.5 concentrations frequently exceeded the World Health Organization (WHO) recommended thresholds, particularly in schools located in high-traffic areas. A respiratory deposition model was applied to estimate the inhaled dose of PM 2.5 among students, revealing increased exposure risks, especially during peak pollution periods in the dry season. Gender-related differences in PM 2.5 deposition were observed, with male students exhibiting higher exposure levels due to physiological factors. This study highlights spatial and temporal variations in classroom air quality and quantifies potential health risks to students. The findings contribute to a better understanding of IAQ disparities in educational environments and provide empirical evidence to support future research on effective mitigation strategies.
- Open Access
- 2 February 2026
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
Mô phỏng sự lan truyền chất ô nhiễm từ việc đốt nhang trong không gian kín
Ô nhiễm không khí trong nhà là một trong những vấn đề môi trường và sức khỏe cộng đồng nghiêm trọng, do con người hiện đại dành khoảng 80-90% thời gian sinh hoạt trong không gian kín. Bên cạnh các nguồn phát thải phổ biến, hành vi đốt nhang – một tập quán văn hóa quen thuộc là nguồn phát sinh chất ô nhiễm đáng kể, đặc biệt là formaldehyde nhưng vẫn chưa được quan tâm đúng mức. Nghiên cứu này tập trung đánh giá sự phát thải và lan truyền formaldehyde từ khói của một số loại nhang phổ biến trên thị trường Việt Nam trong các điều kiện thông gió cơ học khác nhau. Thí nghiệm được thực hiện trong mô hình kín có thể tích 1 m3, kết hợp mô phỏng số bằng phương pháp thể tích hữu hạn sử dụng phần mềm Ansys Fluent để kiểm chứng và phân tích sự phát tán chất ô nhiễm. Kết quả thực nghiệm cho thấy, trong điều kiện không thông gió, nồng độ formaldehyde trung bình đạt 4,163 mg.m-3, cao gấp 4 lần giới hạn tiếp xúc ngắn hạn cho phép theo QCVN 03:2019/BYT. Kết quả mô phỏng sử dụng mô hình rối k-ɛ Reynolds thấp phù hợp với số liệu thực nghiệm, sai lệch khoảng 5%. Nghiên cứu chứng minh hiệu quả của thông gió và tính ứng dụng của mô phỏng CFD trong đánh giá ô nhiễm không khí trong nhà.
- 2 February 2026
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
Open AccessMô phỏng sự lan truyền chất ô nhiễm từ việc đốt nhang trong không gian kín
Ô nhiễm không khí trong nhà là một trong những vấn đề môi trường và sức khỏe cộng đồng nghiêm trọng, do con người hiện đại dành khoảng 80-90% thời gian sinh hoạt trong không gian kín. Bên cạnh các nguồn phát thải phổ biến, hành vi đốt nhang – một tập quán văn hóa quen thuộc là nguồn phát sinh chất ô nhiễm đáng kể, đặc biệt là formaldehyde nhưng vẫn chưa được quan tâm đúng mức. Nghiên cứu này tập trung đánh giá sự phát thải và lan truyền formaldehyde từ khói của một số loại nhang phổ biến trên thị trường Việt Nam trong các điều kiện thông gió cơ học khác nhau. Thí nghiệm được thực hiện trong mô hình kín có thể tích 1 m3, kết hợp mô phỏng số bằng phương pháp thể tích hữu hạn sử dụng phần mềm Ansys Fluent để kiểm chứng và phân tích sự phát tán chất ô nhiễm. Kết quả thực nghiệm cho thấy, trong điều kiện không thông gió, nồng độ formaldehyde trung bình đạt 4,163 mg.m-3, cao gấp 4 lần giới hạn tiếp xúc ngắn hạn cho phép theo QCVN 03:2019/BYT. Kết quả mô phỏng sử dụng mô hình rối k-ɛ Reynolds thấp phù hợp với số liệu thực nghiệm, sai lệch khoảng 5%. Nghiên cứu chứng minh hiệu quả của thông gió và tính ứng dụng của mô phỏng CFD trong đánh giá ô nhiễm không khí trong nhà.
- 12 November 2025
- Published by Springer Nature in International Journal of Energy and Water Resources
- Vol. 10 (1) , 1-16
Urban energy transition indicators: framework development and case study in Ho Chi Minh City
- 12 November 2025
- Published by Springer Nature in International Journal of Energy and Water Resources
- Vol. 10 (1) , 1-16
Urban energy transition indicators: framework development and case study in Ho Chi Minh City
- Open Access
- 27 October 2025
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
Biomass and Carbon Storage Estimation of Melaleuca Forests in Thanh Hoa District, Long An Province
Forests play an important role in living on Earth by absorbing and storing carbon dioxide (CO2), emitting oxygen for the atmosphere, and human life. Forests can digest about 1/12 of the CO2 in the atmosphere and storage of about 72% of the total carbon in global sinks. Forest carbon credits are considered an important tool in reducing carbon emissions and global warming potential. This study aims to estimate the biomass and carbon storage of Melaleuca plantations in Thanh Hoa district, Long An province, Vietnam. The findings contribute to developing sustainable forest management mechanisms and carbon credit markets. Nine standard plots (10x10m) were established to collect data on number of tree, diameter at breast height, and select trees. The results showed that carbon storage (CO2) was 689.13 kg/standard plot for 2-year-old Melaleuca forests and 2423.5 kg/standard plot for 6-year-old Melaleuca forests. The study provides valuable information for forest managers and policymakers in promoting sustainable Melaleuca forest management and carbon credit trading.
- 27 October 2025
- Published by Ho Chi Minh City University of Technology and Engineering in Journal of Technical Education Science
Open AccessBiomass and Carbon Storage Estimation of Melaleuca Forests in Thanh Hoa District, Long An Province
Forests play an important role in living on Earth by absorbing and storing carbon dioxide (CO2), emitting oxygen for the atmosphere, and human life. Forests can digest about 1/12 of the CO2 in the atmosphere and storage of about 72% of the total carbon in global sinks. Forest carbon credits are considered an important tool in reducing carbon emissions and global warming potential. This study aims to estimate the biomass and carbon storage of Melaleuca plantations in Thanh Hoa district, Long An province, Vietnam. The findings contribute to developing sustainable forest management mechanisms and carbon credit markets. Nine standard plots (10x10m) were established to collect data on number of tree, diameter at breast height, and select trees. The results showed that carbon storage (CO2) was 689.13 kg/standard plot for 2-year-old Melaleuca forests and 2423.5 kg/standard plot for 6-year-old Melaleuca forests. The study provides valuable information for forest managers and policymakers in promoting sustainable Melaleuca forest management and carbon credit trading.
- Open Access
- 16 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 396, 01017
Investigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics
The behavior of airborne particles in the human respiratory system is closely related to local tissue dosimetry and its associated health risks. The inhalation of these particles is known to be the origin of lung diseases, such as lung cancer, chronic obstructive pulmonary disease, and cardiovascular disease. To compensate for the difficulty of experiments involving volunteers, in silico studies using numerical models have been adopted as promising alternatives. Therefore, this study applied the computational fluid and particle dynamics technique to investigate the deposition of ultrafine particles in the human respiratory tract from the nostrils to the ninth generation of bronchi. A computational model was created using computed tomography images. The airflow patterns were simulated under steady and incompressible conditions at breathing flow rates of 7.5 and 15 L/min, respectively. The discrete phase was simulated for ultrafine particles with aerodynamic diameters of 2–100 nm. Consequently, the validation work confirmed the simulation accuracy for particle sizes > 25 nm. In the lower respiratory system, the total deposition fraction decreased as the particle size increased. In addition, the eighth generation is a focal point of the deposited particles, elucidated by the local deposition fraction. The results of this study will benefit further studies involving health risk assessments and drug delivery.
- 16 June 2023
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 396, 01017
Open AccessInvestigation of Ultrafine Particle Deposition in Human Airway to the 9th Generation of Bronchial Tubes Using Computational Fluid and Particle Dynamics
The behavior of airborne particles in the human respiratory system is closely related to local tissue dosimetry and its associated health risks. The inhalation of these particles is known to be the origin of lung diseases, such as lung cancer, chronic obstructive pulmonary disease, and cardiovascular disease. To compensate for the difficulty of experiments involving volunteers, in silico studies using numerical models have been adopted as promising alternatives. Therefore, this study applied the computational fluid and particle dynamics technique to investigate the deposition of ultrafine particles in the human respiratory tract from the nostrils to the ninth generation of bronchi. A computational model was created using computed tomography images. The airflow patterns were simulated under steady and incompressible conditions at breathing flow rates of 7.5 and 15 L/min, respectively. The discrete phase was simulated for ultrafine particles with aerodynamic diameters of 2–100 nm. Consequently, the validation work confirmed the simulation accuracy for particle sizes > 25 nm. In the lower respiratory system, the total deposition fraction decreased as the particle size increased. In addition, the eighth generation is a focal point of the deposited particles, elucidated by the local deposition fraction. The results of this study will benefit further studies involving health risk assessments and drug delivery.
- 13 November 2022
- Published by Elsevier in Computer Methods and Programs in Biomedicine
- Vol. 228, 107243
In-silico decongested trial effects on the impaired breathing function of a bulldog suffering from severe brachycephalic obstructive airway syndrome
- 13 November 2022
- Published by Elsevier in Computer Methods and Programs in Biomedicine
- Vol. 228, 107243
In-silico decongested trial effects on the impaired breathing function of a bulldog suffering from severe brachycephalic obstructive airway syndrome
- Open Access
- 4 August 2022
- Published by Wiley in JAPAN ARCHITECTURAL REVIEW
- Vol. 5 (4) , 592-608
Transport and deposition of inhaled man‐made vitreous and asbestos fibers in realistic human respiratory tract models: An in silico study
Particles longer than 5 μm and with a length/diameter ratio >3 are defined as fibers. Asbestos or other fibers are still identified in residential environments due to the emission from asbestos‐used building materials. The respiratory system is the primary route of asbestos exposure; under a longer residence time, asbestos‐related adverse health effects are inevitable. Currently, asbestos fibers have been replaced with man‐made vitreous fibers (MMVFs); however, studies have revealed some similar biological effects of MMVFs with asbestos. Therefore, MMVFs‐induced diseases need to be determined by analyzing their deposition characteristics and foci in human respiratory tracts. In this study, we used computational fluid dynamics method to investigate fibers' airflow and deposition patterns in two realistic human respiratory models. Two drag models were used to predict the deposition of uniform 1 μm (asbestos) and 3.66 μm (carbon fiber‐CF) diameter, 15–300 μm long fibers. Two drag models provided comparable results with the experimental data. Comparatively, asbestos deposition was independent of fiber length, while CF deposition increased proportionally to fiber length. The highest level of local deposition was detected in the anterior nasal cavity. The results obtained from this study can extend current knowledge of human vitreous fiber exposure‐related lung diseases.
- 4 August 2022
- Published by Wiley in JAPAN ARCHITECTURAL REVIEW
- Vol. 5 (4) , 592-608
Open AccessTransport and deposition of inhaled man‐made vitreous and asbestos fibers in realistic human respiratory tract models: An in silico study
Particles longer than 5 μm and with a length/diameter ratio >3 are defined as fibers. Asbestos or other fibers are still identified in residential environments due to the emission from asbestos‐used building materials. The respiratory system is the primary route of asbestos exposure; under a longer residence time, asbestos‐related adverse health effects are inevitable. Currently, asbestos fibers have been replaced with man‐made vitreous fibers (MMVFs); however, studies have revealed some similar biological effects of MMVFs with asbestos. Therefore, MMVFs‐induced diseases need to be determined by analyzing their deposition characteristics and foci in human respiratory tracts. In this study, we used computational fluid dynamics method to investigate fibers' airflow and deposition patterns in two realistic human respiratory models. Two drag models were used to predict the deposition of uniform 1 μm (asbestos) and 3.66 μm (carbon fiber‐CF) diameter, 15–300 μm long fibers. Two drag models provided comparable results with the experimental data. Comparatively, asbestos deposition was independent of fiber length, while CF deposition increased proportionally to fiber length. The highest level of local deposition was detected in the anterior nasal cavity. The results obtained from this study can extend current knowledge of human vitreous fiber exposure‐related lung diseases.
- 25 April 2022
- Published by Vietnam Meteorological and Hydrological Administration in Journal of Hydro-meteorology
- Vol. EME4 (1)
Mô phỏng số trong không gian cabin xe ô tô hướng tới sự tiện nghi nhiệt
Mô phỏng số trong không gian cabin xe ô tô hướng tới sự tiện nghi nhiệt
- 25 April 2022
- Published by Vietnam Meteorological and Hydrological Administration in Journal of Hydro-meteorology
- Vol. EME4 (1)
Mô phỏng số trong không gian cabin xe ô tô hướng tới sự tiện nghi nhiệt
Mô phỏng số trong không gian cabin xe ô tô hướng tới sự tiện nghi nhiệt
- 6 June 2020
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 32 (7) , 311-325
Numerical modeling of nanoparticle deposition in realistic monkey airway and human airway models: a comparative study
One of the most promising approaches to understand inhalation toxicology and to assess the potential risks of inhaled particles is to examine the disposition of the hazardous airborne particles in ...
- 6 June 2020
- Published by Taylor & Francis in Inhalation Toxicology
- Vol. 32 (7) , 311-325
Numerical modeling of nanoparticle deposition in realistic monkey airway and human airway models: a comparative study
One of the most promising approaches to understand inhalation toxicology and to assess the potential risks of inhaled particles is to examine the disposition of the hazardous airborne particles in ...
- 8 January 2020
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 29 (6) , 793-809
Comparative numerical simulation of inhaled particle dispersion in upper human airway to analyse intersubject differences
This study predicted the total and regional deposition of particles in realistic upper human airways and demonstrated the effects of intersubject variations in deposition fraction. Two airway models were studied under flow rates ranging from 0.45 to 2.4 m 3 /h and particle aerodynamic diameters from 1 to 10 μm. The total deposition predictions were validated using in vivo and in vitro experimental data. The intricate airway structures generated heterogeneities of airflow distributions and corresponding particle dispersions and depositions in the models. Nevertheless, with modified inertial parameters, the total deposition fraction curves of the two human upper airway models, as functions of flow rates, converged to a single function. However, regional particle deposition fractions differed significantly among the two models. The surface pressure and wall-shear stress distribution were investigated to assess the relationship of surface pressure and wall-shear stress with hotspot locations in upper airways of both models. For one subject (model A), the central nasal passage regions were found to be sites of higher deposition over the range of particle sizes and flow rates targeted in this study. For the other subject (model B), higher deposition was mostly observed in the vestibule region, caused due to particle inertia as the airway consisted of curvatures. The accelerated flow regions acted as a natural filter to high inertial particles. The results indicated that both total and regional depositions exhibited significant intersubject differences.
- 8 January 2020
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 29 (6) , 793-809
Comparative numerical simulation of inhaled particle dispersion in upper human airway to analyse intersubject differences
This study predicted the total and regional deposition of particles in realistic upper human airways and demonstrated the effects of intersubject variations in deposition fraction. Two airway models were studied under flow rates ranging from 0.45 to 2.4 m 3 /h and particle aerodynamic diameters from 1 to 10 μm. The total deposition predictions were validated using in vivo and in vitro experimental data. The intricate airway structures generated heterogeneities of airflow distributions and corresponding particle dispersions and depositions in the models. Nevertheless, with modified inertial parameters, the total deposition fraction curves of the two human upper airway models, as functions of flow rates, converged to a single function. However, regional particle deposition fractions differed significantly among the two models. The surface pressure and wall-shear stress distribution were investigated to assess the relationship of surface pressure and wall-shear stress with hotspot locations in upper airways of both models. For one subject (model A), the central nasal passage regions were found to be sites of higher deposition over the range of particle sizes and flow rates targeted in this study. For the other subject (model B), higher deposition was mostly observed in the vestibule region, caused due to particle inertia as the airway consisted of curvatures. The accelerated flow regions acted as a natural filter to high inertial particles. The results indicated that both total and regional depositions exhibited significant intersubject differences.