BGBibek Gautam

Bibek Gautam

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bibek Gautam has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The benefit of Ca in improving pinning of BaZrO3-Y2O3doubly-doped YBa2Cu3O7-x/Ca0.3Y0.7Ba2Cu3O7-xmultilayer nanocomposite films

    by Mohan Panth, Victor Ogunjimi, Mary Ann Sebastian, Bibek Gautam, Timothy J Haugan, Judy Z Wu

    This work examines the pinning enhancement in BaZrO3(BZO) +Y2O3doubly-doped (DD) YBa2Cu3O7(YBCO) nanocomposite multilayer (DD-ML) films. The film consists of two 10 nm thin Ca0.3Y0.7Ba2Cu3O7-x(CaY-123) spacers stacking alternatively with three BZO + Y2O3/YBCO layers of 50 nm each in thickness that contain 3 vol% of Y2O3and BZO doping in the range of 2–6 vol%. Enhanced magnetic vortex pinning and improved pinning isotropy with respect to the orientation of magnetic field (B) have been achieved in the DD-ML samples at lower BZO doping as compared to that in the single-layer counterparts (DD-SL) without the CaY-123 spacers. For example, the pinning force density (Fp) of ∼58 GNm−3in 2 vol.% of DD-ML film is ∼110% higher than in 2 vol% of DD-SL at 65 K andB//c-axis, which is attributed to the improved pinning efficiency byc-axis aligned BZO nanorods through diffusion of Calcium (Ca) along the tensile-strained channels at BZO nanorods/YBCO interface for improvement of the interface microstructure and hence pinning efficiency of BZO nanorods. An additional benefit is in the considerably improvedJc(θ) and reducedJcanisotropy in the former over the entire range of the B orientations. However, at higher BZO doping, the BZO nanorods become segmented and misoriented, which may change the Ca diffusion pathways and reduce the benefit of Ca in improving the pinning efficiency of BZO nanorods.


  • Impact of Calcium Doping of YBa2Cu3O7-δ Multilayer Thin Films on the Flux Pinning Landscape at 65–5 K, 0–9 T for Various Applications

    by Mary Ann Sebastian, Charles Ebbing, Di Zhang, Jie Jian, Jijie Huang, Yifan Zhang, Haiyan Wang, Victor Ogunjimi, Mohan Panth, Bibek Gautam, et al.

    An important research goal in the applications of high temperature superconductor YBa 2 Cu 3 O 7-δ (YBCO) thin films is increasing both the critical current density and also the isotropic nature of the film. YBCO is inherently anisotropic due to its layered perovskite structure. The critical current density of YBCO thin films is enhanced by increasing the flux pinning sites in the film by the addition of insulating nano-phase materials, such as BaZrO 3 (BZO) nanorods, which are also anisotropic in nature. Using a multilayer pulsed laser deposition technique has been shown to produce films with inclusions that are more isotropic in nature. However, the defective BZO nanorod interface, resulting from its lattice mismatch with YBCO, prevents obtaining optimum pinning force. This research explores the effect of Ca doped YBCO space layers in the multilayer composite film, on the BZO nanorod/YBCO interface, over a wide range of conditions of 65–5 K and 0– 9T that are suitable for various applications. The interplay of combining these three variables: BaZrO 3 addition to YBCO, multilayer film growth resulting from varying pulsed laser deposition conditions, and employing calcium doped YBCO space layers, and the resulting impact on film microstructures and superconducting properties, will be presented.


  • Enabling coherent BaZrO3 nanorods/YBa2Cu3O7−x interface through dynamic lattice enlargement in vertical epitaxy of BaZrO3/YBa2Cu3O7−x nanocomposites

    by Judy Z Wu, Victor Ogunjimi, Mary Ann Sebastian, Di Zhang, Jie Jian, Jijie Huang, Yifan Zhang, Bibek Gautam, Timothy Haugan, Haiyan Wang

    One-dimensional c-axis-aligned BaZrO3 (BZO) nanorods are regarded as strong one-dimensional artificial pinning centers (1D-APCs) in BZO-doped YaBa2Cu3O7−x (BZO/YBCO) nanocomposite films. However, a microstructure analysis has revealed a defective, oxygen-deficient YBCO column around the BZO 1D-APCs due to the large lattice mismatch of ∼7.7% between the BZO (3a = 1.26 nm) and YBCO (c = 1.17 nm), which has been blamed for the reduced pinning efficiency of BZO 1D-APCs. Herein, we report a dynamic lattice enlargement approach on the tensile strained YBCO lattice during the BZO 1D-APCs growth to induce c-axis elongation of the YBCO lattice up to 1.26 nm near the BZO 1D-APC/YBCO interface via Ca/Cu substitution on single Cu-O planes of YBCO, which prevents the interfacial defect formation by reducing the BZO/YBCO lattice mismatch to ∼1.4%. Specifically, this is achieved by inserting thin Ca0.3Y0.7Ba2Cu3O7−x (CaY-123) spacers as the Ca reservoir in 2–6 vol.% BZO/YBCO nanocomposite multilayer (ML) films. A defect-free, coherent BZO 1D-APC/YBCO interface is confirmed in transmission electron microscopy and elemental distribution analyses. Excitingly, up to five-fold enhancement of J c (B) at magnetic field B= 9.0 T//c-axis and 65 K–77 K was obtained in the ML samples as compared to their BZO/YBCO single-layer (SL) counterpart’s. This has led to a record high pinning force density F p together with significantly enhanced B max at which F p reaches its maximum value F p,max for BZO 1D-APCs at B//c-axis. At 65 K, the F p,max ∼158 GN m−3 and B max ∼ 8.0 T for the 6% BZO/YBCO ML samples represent a significant enhancement over F p,max ∼ 36.1 GN m−3 and B max ∼ 5.0 T for the 6% BZO/YBCO SL counterparts. This result not only illustrates the critical importance of a coherent BZO 1D-APC/YBCO interface in the pinning efficiency, but also provides a facile scheme to achieve such an interface to restore the pristine pinning efficiency of the BZO 1D-APCs.


  • Open Access

    Enhancing magnetic pinning by BaZrO3nanorods forming coherent interface by strain-directed Ca-doping in YBa2Cu3O7−xnanocomposite films

    by Victor Ogunjimi, Mary Ann Sebastian, Di Zhang, Bibek Gautam, Jie Jian, Jijie Huang, Yifan Zhang, Timothy Haugan, Haiyan Wang, Judy Wu

    BaZrO3(BZO) one-dimensional artificial pinning centers (1D-APCs) aligned along thec-axis of the YBa2Cu3O7(YBCO) have been adopted to enhance the magnetic vortex pinning in BZO/YBCO nanocomposite films. However, the pinning force densityFpof the BZO 1D-APCs remains moderate at temperatures near 77 K. A hypothesis of the major limiting factor is the defective BZO 1D-APCs/YBCO interface as a direct consequence of the large interfacial strain originated from the BZO/YBCO lattice mismatch of ∼7.7%. Herein, we explore enlarging thec-axis of the YBCO dynamically to reduce the lattice mismatch and hence to prevent formation of the defective BZO 1D-APCs/YBCO interface. Specifically, thec-axis enlargement was achieved by partial replacement of Cu with Ca on the YBCO lattice using strain-directed Ca diffusion into YBCO from two Ca0.3Y0.7Ba2Cu3O7−x(CaY-123) spacers of only 10 nm in thickness inserted into the 2 vol% BZO 1D-APC/YBCO nanocomposite thin films of ∼150 nm in total thickness. The achieved elongatedc-axis is attributed to the formation of stacking faults induced by Ca-replacement of Cu on YBCO lattice. The reduced BZO/YBCO lattice mismatch allows formation of a coherent BZO 1D-APC/YBCO interface with negligible defects. This leads to an enhancedFpvalue up to 98 GN m−3at 65 K, which is 70% higher than that of the reference 2 vol% BZO 1D-APC/YBCO sample. Furthermore, the benefit of the enhanced pinning of the BZO 1D-APCs with a coherent interface with YBCO can be extended to a large angular range of the magnetic field orientation. This study reveals the significant effect of the BZO/YBCO interface on the pinning efficiency of BZO 1D-APCs and provides a promising approach to achieve a coherent interface in BZO/YBCO nanocomposite films.


  • Ramifications of Pulsed Laser Deposition Growth Temperature on BaHfO3 and Y2O3 Doped Y-Ba-Cu-O Thin Films’ Microstructure and Performance

    by Mary Ann Sebastian, Charles R. Ebbing, Han Wang, Haiyan Wang, Bibek Gautam, Judy Z. Wu, Timothy J. Haugan

    Deposition temperature is an important parameter to control in pulsed laser deposition of thin films, as it affects the ad-atom mobility and diffusion in regards to film growth. Increased growth temperature can also result in increased stacking fault densities in YBa 2 Cu 3 O 7-δ (YBCO) films. This research investigates the influence of deposition temperature on the critical current density and the microstructure of YBCO thin films double doped with BaHfO 3 and Y 2 O 3 . A KrF excimer laser was used to produce thin films of YBCO doped with 4 vol. % BaHfO 3 and 3 vol. % Y 2 O 3 on LaAlO 3 (LAO) substrates at various deposition temperatures from 790–825 °C. The growth temperature influence on the flux pinning landscape and Jc (H,T,θ) properties ( T = 5–77 K, H = 0–9 T, θ = 0–180°) of these films will be presented.


  • Open Access

    The angular range of effective pinning by one-dimensional artificial pinning centers in BaZrO3/YBa2Cu3O7-x nanocomposite films

    by Victor Ogunjimi, Bibek Gautam, Mary Ann Sebastian, Timothy Haugan, Judy Wu

    Nanoscale c-axis-aligned one dimensional artificial pinning centers (1D-APC) in superconducting YBa2Cu3O7-x (YBCO) films have been shown to provide strong correlated pining to magnetic vortices at magnetic field H//c-axis. A question arises on how the pinning effectiveness is sustained as the H-orientation (θ) deviates from the c-axis and how such an angular range is correlated to the pinning efficiency of an individual 1D-APC. To shed lights on this question, this work investigates the angular range of pinning effectiveness of the BaZrO3 (BZO) 1D-APCs in BZO/YBa2Cu3O7-x nanocomposites as the strain field overlap is systematically varied by increasing the BZO doping level in the range of 2-6 vol.% and by the introduction of the secondary Y2O3 nanoparticles (3D APCs). By evaluating the maximum pinning force density (Fp, max), its location Hmax, and the α values of the nanocomposites normalized to that of the reference YBa2Cu3O7-x film as functions of θ at temperatures of 65–77 K, a quantitative correlation between the pinning efficiency of the BZO 1D-APCs and their effective angular range was obtained. In most samples, the 1D-APCs can provide enhanced Hmax in the range of θ ∼0°-60°. However, the Fp, max values only in nanocomposites with high pinning efficiency 1D-APCs exceed that of the YBa2Cu3O7-x over a smaller range up to θ ∼ 37°. Finally, the introduction of 3D APCs results in reduction of the α values over nearly the entire angular range. This study reveals the importance in improving individual 1D-APC’s pinning efficiency and hence extending its angular range of effective pinning.


  • Comparison Study of the Flux Pinning Enhancement of YBa2Cu3O7−δ Thin Films With BaHfO3 + Y2O3 Single- and Mixed-Phase Additions

    by Mary Ann Sebastian, Bibek Gautam, Charles R. Ebbing, George Y. Panasyuk, Michael A. Susner, Jijie Huang, Wenrui Zhang, Haiyan Wang, Judy Z. Wu, Timothy J. Haugan

    Incorporating nano-scale insulating phases to YBa $_{2}$ Cu $_{3}$ O $_{7-\delta}$ (YBCO) superconductor thin films enhances flux pinning by combining different pinning mechanisms, which in turn increases current density. This research explores the effects of addition of the non-reactive phases of barium hafnate (BHO) and yttrium oxide Y $_{2}$ O $_{3}$ . Pulsed laser deposition (PLD) produces thin films on SrTiO $_{3}$ (STO) substrates at various deposition temperatures ranging from 790 °C to 840 °C. PLD target compositions vary the volume percent of BHO from 2-6 vol. %, while maintaining 3 vol. % Y $_{2}$ O $_{3}$ , and the remaining vol. % YBCO. Examining the microstructure through SEM, TEM, and XRD analysis provides insight into the impact of the additions of BHO and Y $_{2}$ O $_{3}$ on the YBCO thin films' magnetic and transport current densities measured with an applied field parallel to the c and ab directions, and on the films' critical temperature measurements. The Y $_{2}$ O $_{3}$ additions decrease the variability in the current density between the c and ab directions, which is an important aspect to consider in applications, such as for HTS wires for motors.


  • Probing the effect of interface on vortex pinning efficiency of one-dimensional BaZrO3 and BaHfO3 artificial pinning centers in YBa2Cu3O7-x thin films

    by Bibek Gautam, Mary Ann Sebastian, Shihong Chen, Shikhar Misra, Jijie Huang, F. Javier Baca, Rose Emergo, Timothy Haugan, Zhongwen Xing, Haiyan Wang, et al.

    C-axis-aligned one-dimensional artificial pinning centers (1D-APCs) provide strong correlated pinning of magnetic vortices and enhance critical current density Jc in superconducting YBa2Cu3O7-x (YBCO) films and coated conductors. A fundamental question arises on what determines the pinning efficiency of different 1D-APCs. To shed light on this question, this work investigates the correlation between the 1D-APC/YBCO interface and the pinning efficiency of 1D-APCs of BaHfO3 (BHO) and BaZrO3 (BZO) of comparable diameters of 5–6 nm. Intriguingly, a highly coherent BHO 1D-APC/YBCO interface is revealed even at a high BHO doping level of 6 vol. %, in contrast to a semi-coherent BZO 1D-APC/YBCO interface with a large number of dislocations. This leads to a profound effect on the pinning efficiency of these 1D-APCs. Specifically, a record high pinning force density peak Fp,max ∼ 182.0 GN m−3 at Hmax > 9.0 T and 65 K is obtained in the former, which is 2.5 times of the best reported in the latter. Moreover, a ratio of Hmax to accommodation field H* determined from the 1D-APC areal concentration is found up to 3.5 in the former in contrast to 0.7 in the latter, demonstrating the critical impact of the APC/YBCO interface on the pinning efficiency of 1D-APCs.


  • Microscopic adaptation of BaHfO3and Y2O3artificial pinning centers for strong and isotropic pinning landscape in YBa2Cu3O7–xthin films

    by Bibek Gautam, Mary Ann Sebastian, Shihong Chen, Timothy J Haugan, Wenrui Zhang, Jijie Huang, Haiyan Wang, Judy Z Wu

    A study of 3 vol% Y 2 O 3 + 2–6 vol% BaHfO 3 double-doped YBa 2 Cu 3 O 7– x (BHO DD) epitaxial thin films was carried out to explore the morphology adaption of c -axis aligned one-dimensional BHO artificial pinning centers (1D APCs) to secondary Y 2 O 3 nanoparticles (3D APCs). BHO 1D APCs have been predicted to have the least rigidity in an elastic strain energy model in APC/YBa 2 Cu 3 O 7– x nanocomposite films. Consequently, they could be best ‘tuned’ away from the c -axis alignment by local strains generated by the Y 2 O 3 3D APCs. This provides an opportunity to generate mixed-morphology APCs, especially at high BHO concentrations. Motivated by this, we have carried out a systematic study of the transport critical current density J c ( H , T , θ ) on the BHO DD samples in magnetic fields ( H ) up to 90 kOe at different H orientations from H // c -axis ( θ = 0), to θ = 45°, and to H // ab -plane ( θ = 90°). Enhanced pinning at all three orientations was observed as illustrated in the comparable low alpha ( α ) values in the range of 0.13–0.25 at 65 K, which is consistent with the mixed 1D (in c -axis) + 2D (in ab -plane) + 3D APCs observed in transmission electron microscopy (TEM). Upon increasing BHO concentration from 2 to 4 vol%, a monotonic increase of the accommodation field H * at θ = 0°, 45° and 90° was observed, indicative of the APC concentration increase of the mixed morphologies. At 6 vol% BHO, the H * continues the increase to 85 kOe at H // c -axis ( θ = 0), and >90 kOe H // ab -plane ( θ = 90°), while it decreases from 80 to 85 kOe at 2–4 vol% to 60 kOe at 6 vol% at θ = 45°, which is consistent with the TEM observation of the connection of 3D APCs, appeared at lower BHO concentration into 2D ones in ab -plane at the higher BHO concentrations. These results shed light on the quantitative adaptation of APCs of mixed morphologies with increasing BHO doping in the BHO DD thin films and are important for controlling the APC pinning landscape towards minimal angular dependence.


  • Open Access

    Towards Isotropic Vortex Pinning in YBCO Films with Double-doping BHO-Y2O3and BZO-Y2O3Artificial Pining Centers

    by Bibek Gautam, Mary Ann Sebastian, Shihong Chen, Timothy Haugan, Yanbin Chen, Zhongwen Xing, Joseph Prestigiacomo, Mike Osofsky, Judy Wu

    Strong and isotropic vortex pinning landscape is demanded for high field applications of YaBa2Cu3O7-x (YBCO) epitaxial thin films. Double-doping (DD) of artificial pinning centers (APCs) of mixed morphologies has been identified as a viable approach for this purpose. This work presents a comparative study on the transport critical current density J c (H, θ) of 3.0 vol.%Y2O3+2.0 (or 6.0) vol.% BaZrO3 (BZO DD) and 3.0 vol.%Y2O3+ 2.0 (or 6.0) vol.% BaHfO3 (BHO DD) films. Based on the elastic strain model, BaHfO3 (BHO) nanorods have lower rigidity than their BaZrO3 (BZO) counterparts, which means their c-axis alignment is more susceptible to the local strain generated by the secondary dopant of Y2O3. Considering the increasing strain field with higher BZO (or BHO doping), the higher susceptibility may result in a large portion of the BHO APCs moving away from perfect c-axis alignment and enhancing isotropic pinning with respect to the H orientation. This is confirmed since the BHO DD films illustrate a less pronounced J c peak at H//c-axis and hence more isotropic J c(θ) than their BZO DD counterparts. At 9.0 T, the variation of the J c across the entire θ range (0-90 degree) is less than 18% for the BHO DD film, in contrast to about 100% for the 2.0 vol.% BZO DD counterpart. At the higher BHO concentration of 6.0 vol.%, this higher tunability of the Y2O3 leads to increased ab-plane aligned BHO APCs and hence enhanced J c at H//ab-plane.