Peyman Saidi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peyman Saidi has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Mark R. Daymond
Department of Mechanical and Materials Engineering Queen's University, Kingston Ontario Canada
12 shared publications - Zhongwen Yao
Department of Mechanical and Materials Engineering Queen's University Kingston Ontario Canada
8 shared publications - Laurent Karim Béland
Queen's University
7 shared publications - Cong Dai
Canadian Nuclear Laboratories, Chalk River, Ontario K0J 1J0, Canada
3 shared publications - Brian Langelier
Canadian Center for Electron Microscopy, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada
2 shared publications - Isaac Tamblyn
University of Ottawa
2 shared publications
Latest Publications
- Open Access
- 21 July 2026
- Published by Elsevier in SSRN Electronic Journal
Migration Parameters Estimation in Irradiated Multi-Components System Conventional Optimization Techniques vs Physics-Informed Neural Networks
Radiation-induced segregation (RIS) is the redistribution of alloying elements near defect sinks under irradiation. It is commonly modeled using rate theory (RT) to describe the spatial and temporal evolution of solute concentrations. The accuracy of RT predictions strongly depends on the reliability of the constants and parameters used in the model. However, inconsistencies in reported parameter values across the literature, stemming from differences in calculation methods, approximations, and the complexity of the studied systems, limit the generalizability of RT models. In this work, we employ atom probe tomography to measure solute distributions at grain boundaries in 304L stainless steel irradiated with 2 MeV protons to a dose of 1.5 displacements per atom (dpa) at 100$^{\circ}$C and 360$^{\circ}$C. These measurements are complemented by additional RIS data from the literature, encompassing a range of temperatures, irradiation types, doses, and alloy chemistries. Two conventional optimization techniques, a gradient-based constrained nonlinear optimizer and a Genetic Algorithm, which is a population-based approach, along with physics-informed neural network (PINN) were employed in this work. Using these methods we extract the migration energies of Fe, Cr, Ni, and Si via vacancy and interstitial mechanisms in irradiated austenitic stainless steels. Our results show that, for a single dataset, PINNs and constrained gradient-based optimization converge to similar migration energy values. Notably, PINNs achieve this convergence approximately 25 times faster. In contrast, genetic algorithms are two orders of magnitude slower and yield less reliable migration energy estimates, with notable discrepancies observed.
- 21 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMigration Parameters Estimation in Irradiated Multi-Components System Conventional Optimization Techniques vs Physics-Informed Neural Networks
Radiation-induced segregation (RIS) is the redistribution of alloying elements near defect sinks under irradiation. It is commonly modeled using rate theory (RT) to describe the spatial and temporal evolution of solute concentrations. The accuracy of RT predictions strongly depends on the reliability of the constants and parameters used in the model. However, inconsistencies in reported parameter values across the literature, stemming from differences in calculation methods, approximations, and the complexity of the studied systems, limit the generalizability of RT models. In this work, we employ atom probe tomography to measure solute distributions at grain boundaries in 304L stainless steel irradiated with 2 MeV protons to a dose of 1.5 displacements per atom (dpa) at 100$^{\circ}$C and 360$^{\circ}$C. These measurements are complemented by additional RIS data from the literature, encompassing a range of temperatures, irradiation types, doses, and alloy chemistries. Two conventional optimization techniques, a gradient-based constrained nonlinear optimizer and a Genetic Algorithm, which is a population-based approach, along with physics-informed neural network (PINN) were employed in this work. Using these methods we extract the migration energies of Fe, Cr, Ni, and Si via vacancy and interstitial mechanisms in irradiated austenitic stainless steels. Our results show that, for a single dataset, PINNs and constrained gradient-based optimization converge to similar migration energy values. Notably, PINNs achieve this convergence approximately 25 times faster. In contrast, genetic algorithms are two orders of magnitude slower and yield less reliable migration energy estimates, with notable discrepancies observed.
- Open Access
- 1 April 2024
- Published by Elsevier in Acta Materialia
- Vol. 271
A hybrid rate theory model of radiation-induced growth
- 1 April 2024
- Published by Elsevier in Acta Materialia
- Vol. 271
Open AccessA hybrid rate theory model of radiation-induced growth
- 20 September 2023
- Published by Elsevier in Scripta Materialia
- Vol. 238
Anisotropic diffusion of radiation-induced self-interstitial clusters in HCP zirconium: A molecular dynamics and rate-theory assessment
- 20 September 2023
- Published by Elsevier in Scripta Materialia
- Vol. 238
Anisotropic diffusion of radiation-induced self-interstitial clusters in HCP zirconium: A molecular dynamics and rate-theory assessment
- 20 May 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (5) , 053606
Radiation-induced segregation on dislocation loops in austenitic Fe-Cr-Ni alloys
Radiation-induced segregation of alloying elements to crystallographic defects is commonly observed in irradiated austenitic stainless steels. The interaction between solutes and radiation-induced defects changes the physical distribution of solutes and thus affects the formation and growth of defects. The change of the microstructure consequently affects the mechanical properties of the material. A qualitative and quantitative understanding of the interaction between solutes and defects is desirable to better predict the service lifetime of nuclear materials. We used atom probe tomography to measure the distribution of solutes at dislocation loops in 304L stainless steel, irradiated with 2 MeV protons up to 1.5 displacements per atom at 373 and 633 K. No segregation at dislocation loops was found in samples irradiated at 373 K, whereas Ni and Si enrichment and Cr depletion were detected at dislocation loops irradiated at 633 K. The experimentally observed perfect and faulted dislocation loops in vacancy and interstitial types were reproduced by molecular dynamics (MD). A hybrid MD/Monte Carlo method was used to predict the redistribution of alloying atoms at all possible types of dislocation loops in face-centered cubic Fe-Cr-Ni alloys at the same irradiated temperatures (373 and 633 K). The simulations show that, at both temperatures, Cr clusters were formed and distributed randomly, and Ni atoms enriched or depleted at interstitial or vacancy dislocation loops, respectively. The change of solute concentration reaches the highest at the edge of the loop. Ni profiles exhibit characteristic behavior in terms of the stress field of the loops: tension inside of vacancy loops showing depletion of Ni atoms compared with compression inside of interstitial loops showing enrichment of Ni atoms. In addition, the stress field is reduced after solute redistribution. The absence of alloying segregation observed in experiments at a lower temperature (373 K) is explained by a rate theory model: Low-temperature irradiation requires significantly longer irradiation time to see the same amount of segregation as at high temperatures because of the extremely low diffusion of vacancies at low temperatures.
- 20 May 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (5) , 053606
Radiation-induced segregation on dislocation loops in austenitic Fe-Cr-Ni alloys
Radiation-induced segregation of alloying elements to crystallographic defects is commonly observed in irradiated austenitic stainless steels. The interaction between solutes and radiation-induced defects changes the physical distribution of solutes and thus affects the formation and growth of defects. The change of the microstructure consequently affects the mechanical properties of the material. A qualitative and quantitative understanding of the interaction between solutes and defects is desirable to better predict the service lifetime of nuclear materials. We used atom probe tomography to measure the distribution of solutes at dislocation loops in 304L stainless steel, irradiated with 2 MeV protons up to 1.5 displacements per atom at 373 and 633 K. No segregation at dislocation loops was found in samples irradiated at 373 K, whereas Ni and Si enrichment and Cr depletion were detected at dislocation loops irradiated at 633 K. The experimentally observed perfect and faulted dislocation loops in vacancy and interstitial types were reproduced by molecular dynamics (MD). A hybrid MD/Monte Carlo method was used to predict the redistribution of alloying atoms at all possible types of dislocation loops in face-centered cubic Fe-Cr-Ni alloys at the same irradiated temperatures (373 and 633 K). The simulations show that, at both temperatures, Cr clusters were formed and distributed randomly, and Ni atoms enriched or depleted at interstitial or vacancy dislocation loops, respectively. The change of solute concentration reaches the highest at the edge of the loop. Ni profiles exhibit characteristic behavior in terms of the stress field of the loops: tension inside of vacancy loops showing depletion of Ni atoms compared with compression inside of interstitial loops showing enrichment of Ni atoms. In addition, the stress field is reduced after solute redistribution. The absence of alloying segregation observed in experiments at a lower temperature (373 K) is explained by a rate theory model: Low-temperature irradiation requires significantly longer irradiation time to see the same amount of segregation as at high temperatures because of the extremely low diffusion of vacancies at low temperatures.
- 1 September 2021
- Published by Elsevier in Materialia
- Vol. 19
Interstitialcy-based reordering kinetics of Ni 3 Al precipitates in irradiated Ni-based super alloys
- 1 September 2021
- Published by Elsevier in Materialia
- Vol. 19
Interstitialcy-based reordering kinetics of Ni 3 Al precipitates in irradiated Ni-based super alloys
- Open Access
Interstitialcy-based reordering kinetics of Ni$_3$Al precipitates in irradiated Ni-based super alloys
Neutron irradiation tends to promote disorder in ordered alloys through the action of the thermal spikes that it generates, while simultaneously introducing point defects and defect clusters. As they migrate, these point defects will promote reordering of the alloys, acting against irradiation-induced disordering. In this study, classical molecular dynamics and a highly parallel accelerated sampling method are used to study the reordering kinetics of Ni$_3$Al under the diffusion of self-interstitial atoms (SIA). By monitoring the order parameter and potential energy from atomistic simulations, we show that the SIA acts as a reordering agent in Ni$_3$Al. A mean-field rate theory model of the interstitialcy-based reordering kinetics is introduced, which reproduces simulation data and predicts reordering at temperatures as low as 500 K.
Open AccessInterstitialcy-based reordering kinetics of Ni$_3$Al precipitates in irradiated Ni-based super alloys
Neutron irradiation tends to promote disorder in ordered alloys through the action of the thermal spikes that it generates, while simultaneously introducing point defects and defect clusters. As they migrate, these point defects will promote reordering of the alloys, acting against irradiation-induced disordering. In this study, classical molecular dynamics and a highly parallel accelerated sampling method are used to study the reordering kinetics of Ni$_3$Al under the diffusion of self-interstitial atoms (SIA). By monitoring the order parameter and potential energy from atomistic simulations, we show that the SIA acts as a reordering agent in Ni$_3$Al. A mean-field rate theory model of the interstitialcy-based reordering kinetics is introduced, which reproduces simulation data and predicts reordering at temperatures as low as 500 K.
- 1 December 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (49) , 26864-26873
Graphene Oxide Membranes for Water Isotope Filtration: Insight at the Nano- and Microscale
- 1 December 2020
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 124 (49) , 26864-26873
Graphene Oxide Membranes for Water Isotope Filtration: Insight at the Nano- and Microscale
- 1 September 2020
- Published by Elsevier in Computational Materials Science
- Vol. 182
Molecular dynamics study of the thermodynamic and kinetic properties of the solid-liquid interface in FeMn
- 1 September 2020
- Published by Elsevier in Computational Materials Science
- Vol. 182
Molecular dynamics study of the thermodynamic and kinetic properties of the solid-liquid interface in FeMn