Alechine Emmanuel Ameh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alechine Emmanuel Ameh has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Leslie Felicia Petrik
Environmental and Nano Science Group, Department of Chemistry, University of the Western Cape, Cape Town 7535, South Africa
4 shared publications Leslie F. Petrik
Environmental and Nano Science Research Group, Department of Chemistry, University of the Western Cape, Bellville, South Africa
2 shared publications- Mero-Lee Ursula Cornelius
Department of Chemistry, University of the Western Cape, Bellville, Cape Town 7535, South Africa
2 shared publications - Olanrewaju Ojo. Fatoba
University of the Western Cape
2 shared publications - Oluwaseun O. Oyekola
Department of Chemical Engineering, Cape Peninsula University of Technology, Cape Town, South Africa
2 shared publications Aminat Oluwatoyin Salaudeen
Department of Biochemistry, Federal University of Technology, Minna, Nigeria
1 shared publication
Latest Publications
- Open Access
- 31 July 2026
- Published by MDPI AG in Environments
- Vol. 13 (8) , 430
Accumulation of Metals and Metalloids in Marine Invertebrates and Macroalgae in False Bay (Cape Town, South Africa)
The concentrations of 18 metal(loid)s were measured in five marine invertebrate species (Oxystele tigrine and sinensis, Marthasterias glacialis, Cymbula oculus and granatina, Parechinus angulosus, and Mytilus galloprovincialis) and five macroalgae/seaweed species (Aeodes orbitosa, Gelidium pristoides, Caulerpa filiformis, Ulva sp., and Bifurcaria brassicac formis) collected from eight sites within the marine environment of False Bay, Cape Town, South Africa. To assess the potential human health hazards associated with consumption, samples were acid digestion and analysed using inductively coupled plasma optical emission spectrometry (ICP-OES). The analysed elements included trace metals (Fe, Mn, Zn) toxic metals (Pb, Cd, As), transition metals (Ta, Ti), alkali metals (Li), and metalloid (Se, As). Metal concentration varied widely among species and locations, with values ranging from Zn: not detected (nd)—3836.04 mg/kg dry weight (dw); As: nd—77.98 mg/kg dw; Pb: nd—301.15 mg/kg dw; Li: nd—97.28 mg/kg dw, indicating diverse metal accumulation patterns. Human health risk was evaluated using the target hazard quotient (THQ) and hazard index (HI). Arsenic consistently exceeded the THQ threshold of one across all sites, and all the HI values were greater than one for all edible species, suggesting potential non-carcinogenic health risks associated with the consumption, except for M. glacialis, which is not commonly consumed. The HI metrics demonstrate the adverse impacts of metal concentration in marine biota. The observed spatial and biological variability in metal accumulation highlights the limitations of relying solely on metal concentrations for assessing health risks, food safety or anthropogenic contamination, and therefore more frequent and comprehensive monitoring is recommended.
- 31 July 2026
- Published by MDPI AG in Environments
- Vol. 13 (8) , 430
Open AccessAccumulation of Metals and Metalloids in Marine Invertebrates and Macroalgae in False Bay (Cape Town, South Africa)
The concentrations of 18 metal(loid)s were measured in five marine invertebrate species (Oxystele tigrine and sinensis, Marthasterias glacialis, Cymbula oculus and granatina, Parechinus angulosus, and Mytilus galloprovincialis) and five macroalgae/seaweed species (Aeodes orbitosa, Gelidium pristoides, Caulerpa filiformis, Ulva sp., and Bifurcaria brassicac formis) collected from eight sites within the marine environment of False Bay, Cape Town, South Africa. To assess the potential human health hazards associated with consumption, samples were acid digestion and analysed using inductively coupled plasma optical emission spectrometry (ICP-OES). The analysed elements included trace metals (Fe, Mn, Zn) toxic metals (Pb, Cd, As), transition metals (Ta, Ti), alkali metals (Li), and metalloid (Se, As). Metal concentration varied widely among species and locations, with values ranging from Zn: not detected (nd)—3836.04 mg/kg dry weight (dw); As: nd—77.98 mg/kg dw; Pb: nd—301.15 mg/kg dw; Li: nd—97.28 mg/kg dw, indicating diverse metal accumulation patterns. Human health risk was evaluated using the target hazard quotient (THQ) and hazard index (HI). Arsenic consistently exceeded the THQ threshold of one across all sites, and all the HI values were greater than one for all edible species, suggesting potential non-carcinogenic health risks associated with the consumption, except for M. glacialis, which is not commonly consumed. The HI metrics demonstrate the adverse impacts of metal concentration in marine biota. The observed spatial and biological variability in metal accumulation highlights the limitations of relying solely on metal concentrations for assessing health risks, food safety or anthropogenic contamination, and therefore more frequent and comprehensive monitoring is recommended.
- Open Access
- 31 May 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 412
Synthesis of BEA zeolite from coal fly ash nano-silica extract: application in CO2 adsorption
- 31 May 2026
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 412
Open AccessSynthesis of BEA zeolite from coal fly ash nano-silica extract: application in CO2 adsorption
- Open Access
- 23 April 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (5) , 1-15
Green-synthesis of MgO and ZrO2 nanocomposites: physicochemical properties and antiplasmodial activity in a mouse model
- 23 April 2025
- Published by Springer Nature in Discover Applied Sciences
- Vol. 7 (5) , 1-15
Open AccessGreen-synthesis of MgO and ZrO2 nanocomposites: physicochemical properties and antiplasmodial activity in a mouse model
- 18 January 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 338
Column adsorption of Rhodamine 6G over Na–P/SOD zeolite synthesised from aluminosilicate secondary waste
- 18 January 2022
- Published by Elsevier in Journal of Cleaner Production
- Vol. 338
Column adsorption of Rhodamine 6G over Na–P/SOD zeolite synthesised from aluminosilicate secondary waste
- Open Access
The Behaviour of Rare Earth Elements from South African Coal Fly Ash during Enrichment Processes: Wet, Magnetic Separation and Zeolitisation
Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorisation to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South African CFA was subjected to wet, magnetic separation and subsequent zeolitisation of the nonmagnetic fraction (NMF); solid products were characterised by XRD, SEM, XRF and LA-ICP-MS. The wet, magnetic separation process resulted in the partitioning of a specific set of transition metals (such as Fe, Mn, Cr, V, Ni, Zn, Cu, Co and Mo) into the magnetic fraction (MF) of CFA, while REEs partitioned into the NMF with a total REE content of 530.2 ppm; thus, the matrix elements of CFA were extracted with ease. Zeolitisation resulted in a solid zeolite product (hydroxysodalite) with a total REE content of 537.6 ppm. The process of zeolitisation also resulted in the selective enrichment of Ce (259.1 ppm) into the solid zeolite product (hydroxysodalite), while other REEs were largely partitioned into the liquid phase. CFA valorisation by wet, magnetic separation and zeolitisation therefore allowed for the partitioning of REEs into various extraction products while recovering the matrix elements of CFA such as Fe, Si and Al. The findings of this study highlight the geopolitical importance of REEs in terms of the development of alternative processes for REE recovery from waste and alternative sources, which may potentially give countries that employ and develop the technology a key advantage in the production of REEs for the global market.
Open AccessThe Behaviour of Rare Earth Elements from South African Coal Fly Ash during Enrichment Processes: Wet, Magnetic Separation and Zeolitisation
Rare earth elements (REEs) are essential raw materials in a variety of industries including clean energy technologies such as electric vehicles and wind turbines. This places an ever-increasing demand on global rare earth element production. Coal fly ash (CFA) possesses appreciable levels of REEs. CFA, a waste by-product of coal combustion, is therefore a readily available source of REEs that does not require mining. CFA valorisation to zeolites has been achieved via various synthesis pathways. This study aimed to evaluate one such pathway by monitoring how REEs partition during CFA processing by the wet, magnetic separation process and zeolitisation. South African CFA was subjected to wet, magnetic separation and subsequent zeolitisation of the nonmagnetic fraction (NMF); solid products were characterised by XRD, SEM, XRF and LA-ICP-MS. The wet, magnetic separation process resulted in the partitioning of a specific set of transition metals (such as Fe, Mn, Cr, V, Ni, Zn, Cu, Co and Mo) into the magnetic fraction (MF) of CFA, while REEs partitioned into the NMF with a total REE content of 530.2 ppm; thus, the matrix elements of CFA were extracted with ease. Zeolitisation resulted in a solid zeolite product (hydroxysodalite) with a total REE content of 537.6 ppm. The process of zeolitisation also resulted in the selective enrichment of Ce (259.1 ppm) into the solid zeolite product (hydroxysodalite), while other REEs were largely partitioned into the liquid phase. CFA valorisation by wet, magnetic separation and zeolitisation therefore allowed for the partitioning of REEs into various extraction products while recovering the matrix elements of CFA such as Fe, Si and Al. The findings of this study highlight the geopolitical importance of REEs in terms of the development of alternative processes for REE recovery from waste and alternative sources, which may potentially give countries that employ and develop the technology a key advantage in the production of REEs for the global market.
- Open Access
- 18 June 2021
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 9
Acylation of Anisole With Benzoyl Chloride Over Rapidly Synthesized Fly Ash–Based HBEA Zeolite
Stable HBEA zeolite with high surface area and strong acid sites was synthesized from coal fly ash–based silica extract via indirect hydrothermal synthesis. The rapid HBEA hydrothermal crystallization times of 8, 10, and 12 h were achieved through a reduced molar water fraction in the synthesis composition. The HBEA zeolites prepared from fly ash silica extract exhibited well-defined spheroidal-shaped crystal morphology with uniform particle sizes of 192, 190, or 239 nm obtained after 8, 10, or 12 h of synthesis time, respectively. The high surface area and the microporous area of 702 and 722 m2/g were achieved as a function of shorter hydrothermal synthesis durations (10 and 24 h, respectively) compared to 48 or 72 h, which resulted in HBEA zeolites with lower surface areas of 538 and 670 m2/g. Likewise, temperature-programmed desorption measurements of fly ash–based HBEA zeolites revealed the presence of weak and strong acid sites in the zeolite. The submicron crystal sizes with a well-defined porosity of HBEA zeolites enhanced the diffusion of anisole and benzoyl chloride molecules toward the active acid sites and hence showed better conversion and selectivity in acylation products. High conversion of benzoyl chloride with anisole was achieved, reaching up to 83% with a 93–96% selectivity toward 4-methoxyacetophenone.
- 18 June 2021
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 9
Open AccessAcylation of Anisole With Benzoyl Chloride Over Rapidly Synthesized Fly Ash–Based HBEA Zeolite
Stable HBEA zeolite with high surface area and strong acid sites was synthesized from coal fly ash–based silica extract via indirect hydrothermal synthesis. The rapid HBEA hydrothermal crystallization times of 8, 10, and 12 h were achieved through a reduced molar water fraction in the synthesis composition. The HBEA zeolites prepared from fly ash silica extract exhibited well-defined spheroidal-shaped crystal morphology with uniform particle sizes of 192, 190, or 239 nm obtained after 8, 10, or 12 h of synthesis time, respectively. The high surface area and the microporous area of 702 and 722 m2/g were achieved as a function of shorter hydrothermal synthesis durations (10 and 24 h, respectively) compared to 48 or 72 h, which resulted in HBEA zeolites with lower surface areas of 538 and 670 m2/g. Likewise, temperature-programmed desorption measurements of fly ash–based HBEA zeolites revealed the presence of weak and strong acid sites in the zeolite. The submicron crystal sizes with a well-defined porosity of HBEA zeolites enhanced the diffusion of anisole and benzoyl chloride molecules toward the active acid sites and hence showed better conversion and selectivity in acylation products. High conversion of benzoyl chloride with anisole was achieved, reaching up to 83% with a 93–96% selectivity toward 4-methoxyacetophenone.
- 1 November 2020
- Published by Elsevier in Catalysis Today
- Vol. 357, 416-424
Stability of fly ash-based BEA-zeolite in hot liquid phase
- 1 November 2020
- Published by Elsevier in Catalysis Today
- Vol. 357, 416-424
Stability of fly ash-based BEA-zeolite in hot liquid phase