Yilei Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yilei Wu has a total of 386 co-authors. Here are the top co-authors by number of shared publications:
- Michael R. Wasielewski
Northwestern University 2145 Sheridan Road
26 shared publications - James Fraser Stoddart
Stoddart Institute of Molecular Science, Department of Chemistry, Zhejiang University, Hangzhou, China
20 shared publications - Zhenan Bao
Department of Chemical Engineering, Stanford University, Stanford, CA, USA
16 shared publications - Ryan Michael Young
Northwestern University
13 shared publications - Marco Frasconi
Department of Chemical Sciences University of Padova Padova Italy
11 shared publications - Zhichang Liu
Key Laboratory of Precise Synthesis of Functional Molecules of Zhejiang Province, Department of Chemistry, School of Science and Research Center for Industries of the Future, Westlake University, and Westlake Institute for Advanced Study, Hangzhou, China
10 shared publications
Latest Publications
- 5 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (29) , 12997-13006
Stereoisomeric mixture of a multigram-synthesized helicene assembles swiftly into hierarchical ribbons via supramolecular sheets
A new helicene, with a structure inspired by perylene-diimide, is synthesized on a ten-gram scale. Although obtained as a mixture of six stereoisomers, it self-assembles rapidly into long hierarchical ribbons via single-molecule-thick sheets.
- 5 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (29) , 12997-13006
Stereoisomeric mixture of a multigram-synthesized helicene assembles swiftly into hierarchical ribbons via supramolecular sheets
A new helicene, with a structure inspired by perylene-diimide, is synthesized on a ten-gram scale. Although obtained as a mixture of six stereoisomers, it self-assembles rapidly into long hierarchical ribbons via single-molecule-thick sheets.
- Open Access
- 5 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (23) , eaec2641
Biofunctionalized polymer semiconductors toward soft and stretchable transistor-based biosensors
Organic materials with tunable chemical and mechanical properties are ideal for interfacing with skin and tissue in biomedical applications. While polymer semiconductors (PSCs) have advanced toward skin-like mechanical performance, the limited capacity for biofunctionalization has restricted their biosensing applications. In this study, we introduce a direct biofunctionalization strategy for PSCs based on thiol-ene chemistry. We selectively grafted thiolated biomolecules (e.g., aptamers) onto elastomeric domains within an interconnected semiconductor/elastomer network. This approach enables high-resolution patterning down to 10 micrometers while preserving the electronic performance of PSCs. Leveraging this platform, we designed and fabricated skin-like electrolyte-gated organic field-effect transistors with biofunctionalized channels. These soft and stretchable devices exhibit stable operation in physiological buffers for more than 50 days and maintain performance under up to 50% strain. When functionalized with cortisol-binding aptamers, the sensors achieved sensitive detection across physiologically relevant concentrations, down to the picomolar range. This work establishes a foundation for integrating stretchable and biofunctional PSCs into skin-like wearable devices.
- 5 June 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (23) , eaec2641
Open AccessBiofunctionalized polymer semiconductors toward soft and stretchable transistor-based biosensors
Organic materials with tunable chemical and mechanical properties are ideal for interfacing with skin and tissue in biomedical applications. While polymer semiconductors (PSCs) have advanced toward skin-like mechanical performance, the limited capacity for biofunctionalization has restricted their biosensing applications. In this study, we introduce a direct biofunctionalization strategy for PSCs based on thiol-ene chemistry. We selectively grafted thiolated biomolecules (e.g., aptamers) onto elastomeric domains within an interconnected semiconductor/elastomer network. This approach enables high-resolution patterning down to 10 micrometers while preserving the electronic performance of PSCs. Leveraging this platform, we designed and fabricated skin-like electrolyte-gated organic field-effect transistors with biofunctionalized channels. These soft and stretchable devices exhibit stable operation in physiological buffers for more than 50 days and maintain performance under up to 50% strain. When functionalized with cortisol-binding aptamers, the sensors achieved sensitive detection across physiologically relevant concentrations, down to the picomolar range. This work establishes a foundation for integrating stretchable and biofunctional PSCs into skin-like wearable devices.
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Giant Molecule Acceptors Based on A-D-A-Type Small Molecule Acceptor Subunits for Medium-Bandgap Organic Solar Cells
Medium-bandgap organic solar cells (OSCs) have attracted significant attention for indoor applications and ternary devices as the second acceptor. Here, we designed and synthesized a new medium-bandgap giant molecule acceptor (GMA) DF-4TC based on A-D-A type small molecule acceptor (SMA) subunits. To the best of our knowledge, DF-4TC is the first GMA constructed from A-D-A type SMA building blocks, where the reported GMAs are all based on A-DA'D-A type SMA subunits. The OSCs based on PM6:DF-4TC possess a high open-circuit voltage (Voc) of 1.037 V, among the highest Voc reported for GMA-based OSCs. But the weak aggregation of DF-4TC constrains the molecular packing and device performance. To strengthen molecular aggregation, another GMA DF-4IC was synthesized by replacing the end groups. Benefiting from the strengthened molecular aggregation of DF-4IC, the PM6:DF-4IC-based OSCs show higher exciton dissociation efficiency, better charge transport, and less recombination behaviors and achieve a higher power conversion efficiency (PCE) of 12.44%. Incorporating DF-4IC as the secondary acceptor into the PM6:BTP-eC9 system, the PM6:BTP-eC9:DF-4IC-based ternary OSCs exhibit increased Voc, contributing to a higher PCE of 19.71%. This work explored medium-bandgap GMAs, opening new opportunities for the rational design of high-performance OSCs.
- 31 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
Giant Molecule Acceptors Based on A-D-A-Type Small Molecule Acceptor Subunits for Medium-Bandgap Organic Solar Cells
Medium-bandgap organic solar cells (OSCs) have attracted significant attention for indoor applications and ternary devices as the second acceptor. Here, we designed and synthesized a new medium-bandgap giant molecule acceptor (GMA) DF-4TC based on A-D-A type small molecule acceptor (SMA) subunits. To the best of our knowledge, DF-4TC is the first GMA constructed from A-D-A type SMA building blocks, where the reported GMAs are all based on A-DA'D-A type SMA subunits. The OSCs based on PM6:DF-4TC possess a high open-circuit voltage (Voc) of 1.037 V, among the highest Voc reported for GMA-based OSCs. But the weak aggregation of DF-4TC constrains the molecular packing and device performance. To strengthen molecular aggregation, another GMA DF-4IC was synthesized by replacing the end groups. Benefiting from the strengthened molecular aggregation of DF-4IC, the PM6:DF-4IC-based OSCs show higher exciton dissociation efficiency, better charge transport, and less recombination behaviors and achieve a higher power conversion efficiency (PCE) of 12.44%. Incorporating DF-4IC as the secondary acceptor into the PM6:BTP-eC9 system, the PM6:BTP-eC9:DF-4IC-based ternary OSCs exhibit increased Voc, contributing to a higher PCE of 19.71%. This work explored medium-bandgap GMAs, opening new opportunities for the rational design of high-performance OSCs.
- Open Access
- 24 October 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Stereoisomeric Mixture of a Multigram-Synthesized Helicene Assembles Swiftly into Hierarchical Ribbons via Supramolecular Sheets
Hierarchical supramolecular assembly is a hallmark of biological systems but remains difficult to emulate with synthetic tectons. The challenge increases with chiral tectons, particularly when they are not optically enriched. It follows that the most demanding scenario for hierarchical self-assembly arises from racemic mixtures of multiple diastereomers. Here, we report the rapid self-assembly of a mixture of six stereoisomers of a new helicene into hierarchical centimeters-long supramolecular ribbons. A structural analog of perylene-diimide, this helicene is accessible on a multigram scale (>10 g per batch). Microscopic, spectroscopic, and X-ray analyses suggest the helicene spontaneously forms homo-handed, single-molecule-thick sheets that associate into filaments. These filaments bundle into fibers, which entangle to form macroscopic ribbons—visible from the growth solution within seconds. This new helicene may be leveraged for the preparation of other hierarchical supramolecular assemblies, including those with stereochemically complex constituents.
- 24 October 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessStereoisomeric Mixture of a Multigram-Synthesized Helicene Assembles Swiftly into Hierarchical Ribbons via Supramolecular Sheets
Hierarchical supramolecular assembly is a hallmark of biological systems but remains difficult to emulate with synthetic tectons. The challenge increases with chiral tectons, particularly when they are not optically enriched. It follows that the most demanding scenario for hierarchical self-assembly arises from racemic mixtures of multiple diastereomers. Here, we report the rapid self-assembly of a mixture of six stereoisomers of a new helicene into hierarchical centimeters-long supramolecular ribbons. A structural analog of perylene-diimide, this helicene is accessible on a multigram scale (>10 g per batch). Microscopic, spectroscopic, and X-ray analyses suggest the helicene spontaneously forms homo-handed, single-molecule-thick sheets that associate into filaments. These filaments bundle into fibers, which entangle to form macroscopic ribbons—visible from the growth solution within seconds. This new helicene may be leveraged for the preparation of other hierarchical supramolecular assemblies, including those with stereochemically complex constituents.
- 15 November 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (1) , 386-396
Suppressed non-radiative loss and efficient hole transfer at a small highest occupied molecular orbital offset endows binary organic solar cells with 19.73% efficiency and a small efficiency-cost gap
Suppressing energy/voltage loss and realizing efficient charge transfer at small frontier molecular orbital offsets between the donor and acceptor is viable to simultaneously improve the open-circuit voltage (Voc) and short-circuit current (Jsc), and thus the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, two A–DA′D–A type acceptors, PEH-F and TEH-F, are designed and synthesized with different conjugated outer side chains, to pursue high-efficiency and cost-effective OSCs for industrialization. In comparison with TEH-F (thienyl outer side chain), PEH-F with phenyl outer side chains delivers up-shifted frontier energy levels, a wider optical bandgap, and a higher absorption coefficient. By adopting low-cost polymer PTQ11 as a donor, the PEH-F-based device realizes a low energy loss of 0.511 eV with a suppressed non-radiative loss of only 0.182 eV and exhibits efficient exciton dissociation and hole transfer even at an extremely small highest occupied molecular orbital offset of 0.06 eV. Eventually, the PTQ11:PEH-F-based binary device demonstrates a superior PCE of 19.73% with high Voc and Jsc simultaneously, which is the highest PCE to date for OSCs based on low-cost polymer donors. More importantly, this device shows a small efficiency-cost gap for industrialization with the estimated minimum sustainable price (MSP) of 0.35 $ per Wp, which is dramatically lower than those of other reported high-performance OSCs.
- 15 November 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (1) , 386-396
Suppressed non-radiative loss and efficient hole transfer at a small highest occupied molecular orbital offset endows binary organic solar cells with 19.73% efficiency and a small efficiency-cost gap
Suppressing energy/voltage loss and realizing efficient charge transfer at small frontier molecular orbital offsets between the donor and acceptor is viable to simultaneously improve the open-circuit voltage (Voc) and short-circuit current (Jsc), and thus the power conversion efficiency (PCE) of organic solar cells (OSCs). Here, two A–DA′D–A type acceptors, PEH-F and TEH-F, are designed and synthesized with different conjugated outer side chains, to pursue high-efficiency and cost-effective OSCs for industrialization. In comparison with TEH-F (thienyl outer side chain), PEH-F with phenyl outer side chains delivers up-shifted frontier energy levels, a wider optical bandgap, and a higher absorption coefficient. By adopting low-cost polymer PTQ11 as a donor, the PEH-F-based device realizes a low energy loss of 0.511 eV with a suppressed non-radiative loss of only 0.182 eV and exhibits efficient exciton dissociation and hole transfer even at an extremely small highest occupied molecular orbital offset of 0.06 eV. Eventually, the PTQ11:PEH-F-based binary device demonstrates a superior PCE of 19.73% with high Voc and Jsc simultaneously, which is the highest PCE to date for OSCs based on low-cost polymer donors. More importantly, this device shows a small efficiency-cost gap for industrialization with the estimated minimum sustainable price (MSP) of 0.35 $ per Wp, which is dramatically lower than those of other reported high-performance OSCs.
- Open Access
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (38) , 25837-25849
Mesomeric control of the optoelectronic properties of polymerized small molecule acceptors
Via mesomeric control, the optoelectronic properties of regioregular polymerized small molecule acceptors can be finely tuned to improve the efficiency of the related all-polymer solar cells.
- 16 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (38) , 25837-25849
Open AccessMesomeric control of the optoelectronic properties of polymerized small molecule acceptors
Via mesomeric control, the optoelectronic properties of regioregular polymerized small molecule acceptors can be finely tuned to improve the efficiency of the related all-polymer solar cells.
- Open Access
- 3 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Mesomeric control of the optoelectronic properties of polymerized small molecule acceptors
Regioregular polymerized non-fullerene small molecule acceptors (PSMAs) are currently the most promising candidates to achieve highly efficient all-polymer solar cells. Previous studies showed a systematic correlation between polymerization sites and the properties of the PSMA, where one of the regioisomers (γ) displays more favorable optoelectronic and photovoltaic properties compared to the other (δ). However, these systematic observations have not been rationalized yet. Here, using first principles calculations, we reveal that the substituents on the cross-conjugated terminal unit of the SMA core are responsible for improving the optoelectronic properties of γ-PSMAs, by extending the conjugation length and enhancing favorable mesomeric effects. Importantly, we demonstrate that these effects may be exploited as a universal molecular design principle. We predict that functionalizing PSMAs in selected positions with electron-withdrawing groups could further improve their optoelectronic properties. Our study provides a quantitative framework for understanding and rationalizing the relationship between polymerization sites and optoelectronic properties in regioregular PSMAs; in addition, our results pave the way for a rational design principle to further improve the properties of these conjugated polymers and, in turn, the efficiency of all-polymer solar cells.
- 3 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMesomeric control of the optoelectronic properties of polymerized small molecule acceptors
Regioregular polymerized non-fullerene small molecule acceptors (PSMAs) are currently the most promising candidates to achieve highly efficient all-polymer solar cells. Previous studies showed a systematic correlation between polymerization sites and the properties of the PSMA, where one of the regioisomers (γ) displays more favorable optoelectronic and photovoltaic properties compared to the other (δ). However, these systematic observations have not been rationalized yet. Here, using first principles calculations, we reveal that the substituents on the cross-conjugated terminal unit of the SMA core are responsible for improving the optoelectronic properties of γ-PSMAs, by extending the conjugation length and enhancing favorable mesomeric effects. Importantly, we demonstrate that these effects may be exploited as a universal molecular design principle. We predict that functionalizing PSMAs in selected positions with electron-withdrawing groups could further improve their optoelectronic properties. Our study provides a quantitative framework for understanding and rationalizing the relationship between polymerization sites and optoelectronic properties in regioregular PSMAs; in addition, our results pave the way for a rational design principle to further improve the properties of these conjugated polymers and, in turn, the efficiency of all-polymer solar cells.
- Open Access
- 9 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-14
Tuning polymer-backbone coplanarity and conformational order to achieve high-performance printed all-polymer solar cells
All-polymer solar cells (all-PSCs) offer improved morphological and mechanical stability compared with those containing small-molecule-acceptors (SMAs). They can be processed with a broader range of conditions, making them desirable for printing techniques. In this study, we report a high-performance polymer acceptor design based on bithiazole linker (PY-BTz) that are on par with SMAs. We demonstrate that bithiazole induces a more coplanar and ordered conformation compared to bithiophene due to the synergistic effect of non-covalent backbone planarization and reduced steric encumbrances. As a result, PY-BTz shows a significantly higher efficiency of 16.4% in comparison to the polymer acceptors based on commonly used thiophene-based linkers (i.e., PY-2T, 9.8%). Detailed analyses reveal that this improvement is associated with enhanced conjugation along the backbone and closer interchain π-stacking, resulting in higher charge mobilities, suppressed charge recombination, and reduced energetic disorder. Remarkably, an efficiency of 14.7% is realized for all-PSCs that are solution-sheared in ambient conditions, which is among the highest for devices prepared under conditions relevant to scalable printing techniques. This work uncovers a strategy for promoting backbone conjugation and planarization in emerging polymer acceptors that can lead to superior all-PSCs.
- 9 March 2024
- Published by Springer Nature in Nature Communications
- Vol. 15 (1) , 1-14
Open AccessTuning polymer-backbone coplanarity and conformational order to achieve high-performance printed all-polymer solar cells
All-polymer solar cells (all-PSCs) offer improved morphological and mechanical stability compared with those containing small-molecule-acceptors (SMAs). They can be processed with a broader range of conditions, making them desirable for printing techniques. In this study, we report a high-performance polymer acceptor design based on bithiazole linker (PY-BTz) that are on par with SMAs. We demonstrate that bithiazole induces a more coplanar and ordered conformation compared to bithiophene due to the synergistic effect of non-covalent backbone planarization and reduced steric encumbrances. As a result, PY-BTz shows a significantly higher efficiency of 16.4% in comparison to the polymer acceptors based on commonly used thiophene-based linkers (i.e., PY-2T, 9.8%). Detailed analyses reveal that this improvement is associated with enhanced conjugation along the backbone and closer interchain π-stacking, resulting in higher charge mobilities, suppressed charge recombination, and reduced energetic disorder. Remarkably, an efficiency of 14.7% is realized for all-PSCs that are solution-sheared in ambient conditions, which is among the highest for devices prepared under conditions relevant to scalable printing techniques. This work uncovers a strategy for promoting backbone conjugation and planarization in emerging polymer acceptors that can lead to superior all-PSCs.
- 26 December 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (1) , 256-265
Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering
- 26 December 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 36 (1) , 256-265
Tuning the Mobility of Indacenodithiophene-Based Conjugated Polymers via Coplanar Backbone Engineering
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (22) , 22642-22655
Bulk Heterojunction Upconversion Thin Films Fabricated via One-Step Solution Deposition
Upconversion of near-infrared light into the visible has achieved limited success in applications due to the difficulty of creating solid-state films with high external quantum efficiency (EQE). Recent developments have expanded the range of relevant materials for solid-state triplet-triplet annihilation upconversion through the use of a charge-transfer state sensitization process. Here, we report the single-step solution-processed deposition of a bulk heterojunction upconversion film using organic semiconductors. The use of a bulk heterojunction thin film enables a high contact area between sensitizer and annihilator materials in this interface-triplet-generation mechanism and allows for a facile single-step deposition process. Demonstrations of multiple deposition and patterning methods on glass and flexible substrates show the promise of this materials system for solid-state upconversion applications.
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (22) , 22642-22655
Bulk Heterojunction Upconversion Thin Films Fabricated via One-Step Solution Deposition
Upconversion of near-infrared light into the visible has achieved limited success in applications due to the difficulty of creating solid-state films with high external quantum efficiency (EQE). Recent developments have expanded the range of relevant materials for solid-state triplet-triplet annihilation upconversion through the use of a charge-transfer state sensitization process. Here, we report the single-step solution-processed deposition of a bulk heterojunction upconversion film using organic semiconductors. The use of a bulk heterojunction thin film enables a high contact area between sensitizer and annihilator materials in this interface-triplet-generation mechanism and allows for a facile single-step deposition process. Demonstrations of multiple deposition and patterning methods on glass and flexible substrates show the promise of this materials system for solid-state upconversion applications.