Xuemei Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xuemei Wang has a total of 139 co-authors. Here are the top co-authors by number of shared publications:
Xiaoquan Lu
48 shared publicationsXinzhen Du
41 shared publications- Xinzhen Du
Key Laboratory of Water Security and Water Environment Protection in Plateau Intersection Ministry of Education College of Chemistry and Chemical Engineering Northwest Normal University Lanzhou People's Republic of China
20 shared publications Zhen Zhang
15 shared publicationsPengfei Huang
College of Judicial Police, Gansu University of Political Science and Law, Lanzhou, 730070, China
14 shared publicationsJie Zhang
12 shared publications
Latest Publications
- 23 October 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
Synergy of the Structure and Interface in Mesoporous UiO-66-F4 3D Chitosan Aerogels for Precise and Selective Identification of Per- and Polyfluoroalkyl Substances
Understanding the role of pore architecture and interfacial interactions in Per- and polyfluoroalkyl substances (PFAS) separation and analysis is essential for the rational design of high-performance fluorinated porous adsorbents. In this study, three fluorinated metal−organic framework materials (meso-UiO-66-F4) with tunable mesopore volume were synthesized and incorporated into three-dimensional chitosan aerogels (meso-UiO-66-F4/chitosan aerogel) to construct recyclable adsorbents of monolithic solid-phase extraction (MSPE) for direct immersion solid-phase extraction (DI-SPE), which was applied to selectively enrich 12 PFAS. The adsorption behavior exhibited a clear dependence on the relationship between mesoporous structure and PFAS chain length. The adsorption mechanisms of representative short-chain PFHxA and long-chain PFOA were further investigated by density functional theory (DFT) calculations. The optimized meso-UiO-66-F4/chitosan aerogel exhibited efficient extraction capability toward twelve PFAS with excellent recyclability; it combined liquid chromatography-tandem mass spectrometry (LC-MS/MS) to achieve excellent precision, wide linear ranges of 0.09−200,000 ng L−1, high linearity (R2 = 0.9925−0.9999), and low detection limits of 0.03−1.02 ng L−1. This study provided new insights into the relationship between pore accessibility, molecular confinement, and interfacial affinity, offering a rational strategy for designing reusable fluorinated porous adsorbents for enrichment and determination of trace PFAS from various environmental samples.
- 23 October 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
Synergy of the Structure and Interface in Mesoporous UiO-66-F4 3D Chitosan Aerogels for Precise and Selective Identification of Per- and Polyfluoroalkyl Substances
Understanding the role of pore architecture and interfacial interactions in Per- and polyfluoroalkyl substances (PFAS) separation and analysis is essential for the rational design of high-performance fluorinated porous adsorbents. In this study, three fluorinated metal−organic framework materials (meso-UiO-66-F4) with tunable mesopore volume were synthesized and incorporated into three-dimensional chitosan aerogels (meso-UiO-66-F4/chitosan aerogel) to construct recyclable adsorbents of monolithic solid-phase extraction (MSPE) for direct immersion solid-phase extraction (DI-SPE), which was applied to selectively enrich 12 PFAS. The adsorption behavior exhibited a clear dependence on the relationship between mesoporous structure and PFAS chain length. The adsorption mechanisms of representative short-chain PFHxA and long-chain PFOA were further investigated by density functional theory (DFT) calculations. The optimized meso-UiO-66-F4/chitosan aerogel exhibited efficient extraction capability toward twelve PFAS with excellent recyclability; it combined liquid chromatography-tandem mass spectrometry (LC-MS/MS) to achieve excellent precision, wide linear ranges of 0.09−200,000 ng L−1, high linearity (R2 = 0.9925−0.9999), and low detection limits of 0.03−1.02 ng L−1. This study provided new insights into the relationship between pore accessibility, molecular confinement, and interfacial affinity, offering a rational strategy for designing reusable fluorinated porous adsorbents for enrichment and determination of trace PFAS from various environmental samples.
- Open Access
- 14 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79051
Adaptive Interfacial Recognition Through Proton‐Coupled Force Reconfiguration in MOF@COF Composites
Achieving dynamic, in situ switchable molecular recognition in porous composites remains challenging due to the difficulty of precisely modulating interfacial noncovalent interactions at the atomic level. Here, we demonstrated that proton‐coupled interfacial force reconstruction served as a general and efficient regulatory strategy to control adsorption‐desorption behaviors in a metal‐organic framework (MOFs)‐based covalent organic framework (COF) composite, NH 2 ‐UiO‐66@COF‐TpDBA (NU@FC). Reversible protonation‐deprotonation at carboxyl sites induced precise redistribution of the interfacial noncovalent force field, thereby endowing switchable molecular capture and markedly improving the utilization efficiency of interfacial active sites, constructing a stimuli‐responsive adsorption platform featuring molecular capture and release. This atomic‐scale regulation, coupled with solvent‐ triggered microenvironment modulation, allowed adaptive recognition of polychlorinated biphenyls (PCBs) under diverse environments. Combined with the mechanically reinforced sheath‐tube‐protected solid‐phase microextraction device (STP‐SPME), this proton‐responsive interfacial regulation strategy was extended to an in situ, low‐cost, anti‐interference sample pretreatment system, achieving reliable identification and efficient extraction of trace organic pollutants from complex environmental matrices. Beyond device‐level performance, this study established proton‐coupled force reconstruction as a general design principle for constructing intelligently responsive MOF‐COF composites, bridging atomic‐scale interfacial modulation with expansive environmental analysis.
- 14 October 2026
- Published by Wiley in Advanced Functional Materials
- p. e79051
Open AccessAdaptive Interfacial Recognition Through Proton‐Coupled Force Reconfiguration in MOF@COF Composites
Achieving dynamic, in situ switchable molecular recognition in porous composites remains challenging due to the difficulty of precisely modulating interfacial noncovalent interactions at the atomic level. Here, we demonstrated that proton‐coupled interfacial force reconstruction served as a general and efficient regulatory strategy to control adsorption‐desorption behaviors in a metal‐organic framework (MOFs)‐based covalent organic framework (COF) composite, NH 2 ‐UiO‐66@COF‐TpDBA (NU@FC). Reversible protonation‐deprotonation at carboxyl sites induced precise redistribution of the interfacial noncovalent force field, thereby endowing switchable molecular capture and markedly improving the utilization efficiency of interfacial active sites, constructing a stimuli‐responsive adsorption platform featuring molecular capture and release. This atomic‐scale regulation, coupled with solvent‐ triggered microenvironment modulation, allowed adaptive recognition of polychlorinated biphenyls (PCBs) under diverse environments. Combined with the mechanically reinforced sheath‐tube‐protected solid‐phase microextraction device (STP‐SPME), this proton‐responsive interfacial regulation strategy was extended to an in situ, low‐cost, anti‐interference sample pretreatment system, achieving reliable identification and efficient extraction of trace organic pollutants from complex environmental matrices. Beyond device‐level performance, this study established proton‐coupled force reconstruction as a general design principle for constructing intelligently responsive MOF‐COF composites, bridging atomic‐scale interfacial modulation with expansive environmental analysis.
- Open Access
- 1 June 2026
- Published by Elsevier in SSRN Electronic Journal
Rapid and robust in-situ integration of an imine-linked covalent organic framework coating with titanium oxide nanoflakes grown on superelastic nickel-titanium alloy substrate as a selective solid-phase microextraction fiber for highly sensitive detection of bisphenols in water
Bisphenols (BPs) are widely distributed in aquatic environment at ultra-trace levels and pose a potential risk to human health. Herein, solid-phase microextraction (SPME) was employed for efficient preconcentration of ultra-trace BPs in water prior to their quantification. In order to enhance the stability of the fiber coating and the adsorption capability of BPs, titanium oxide nanoflakes (TiONFs) were in situ grown on the superelastic nickel-titanium alloy (NiTi) fiber substrate via a facile hydrothermal method followed by covalent bonding of an imine-based covalent organic framework coating via an ultrasound-assisted approach using 2,5-divinyl-1,4-benzobis(aldehyde) (DVA) and tetra-(4-aminophenyl)-ethylene (TAPE) as building units. By introducing the COFDVA-TAPE coating into the structure of TiONFs, the constructed fiber exhibited selective adsorption and sensitive detection of five typical BPs in water combined with high-performance liquid chromatography with ultraviolet detection (HPLC–UV). The adsorption mechanism was discussed through the combination of density functional theory calculations of molecular dimensions and surface electrostatic potentials. After optimizing the adsorption conditions, the established method presented linear ranges from 0.02 μg·L-1 to 200 μg·L-1 along with limits of detection from 0.007 μg·L-1 to 0.046 μg·L-1. Relative standard deviations (RSDs) for the intra-day and inter-day analyses of the established method were 1.47%–2.54% and 2.02%–4.09%, respectively. Moreover, the constructed fiber demonstrated high stability during the adsorption-desorption process. Finally, the established method was successfully employed for efficient preconcentration and sensitive detection of target BPs in water. The relative recoveries of 86.70%–116.0% were obtained along with RSDs of 2.23%–6.58%.
- 1 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessRapid and robust in-situ integration of an imine-linked covalent organic framework coating with titanium oxide nanoflakes grown on superelastic nickel-titanium alloy substrate as a selective solid-phase microextraction fiber for highly sensitive detection of bisphenols in water
Bisphenols (BPs) are widely distributed in aquatic environment at ultra-trace levels and pose a potential risk to human health. Herein, solid-phase microextraction (SPME) was employed for efficient preconcentration of ultra-trace BPs in water prior to their quantification. In order to enhance the stability of the fiber coating and the adsorption capability of BPs, titanium oxide nanoflakes (TiONFs) were in situ grown on the superelastic nickel-titanium alloy (NiTi) fiber substrate via a facile hydrothermal method followed by covalent bonding of an imine-based covalent organic framework coating via an ultrasound-assisted approach using 2,5-divinyl-1,4-benzobis(aldehyde) (DVA) and tetra-(4-aminophenyl)-ethylene (TAPE) as building units. By introducing the COFDVA-TAPE coating into the structure of TiONFs, the constructed fiber exhibited selective adsorption and sensitive detection of five typical BPs in water combined with high-performance liquid chromatography with ultraviolet detection (HPLC–UV). The adsorption mechanism was discussed through the combination of density functional theory calculations of molecular dimensions and surface electrostatic potentials. After optimizing the adsorption conditions, the established method presented linear ranges from 0.02 μg·L-1 to 200 μg·L-1 along with limits of detection from 0.007 μg·L-1 to 0.046 μg·L-1. Relative standard deviations (RSDs) for the intra-day and inter-day analyses of the established method were 1.47%–2.54% and 2.02%–4.09%, respectively. Moreover, the constructed fiber demonstrated high stability during the adsorption-desorption process. Finally, the established method was successfully employed for efficient preconcentration and sensitive detection of target BPs in water. The relative recoveries of 86.70%–116.0% were obtained along with RSDs of 2.23%–6.58%.
- Open Access
- 1 June 2026
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 44 (6) , 713-720
Case-based teaching with both positive and negative examples in undergraduate analytical chemistry laboratory: determination of six nitrogen-containing pesticides in environmental samples by solid-phase microextraction-high performance liquid chromatography
In analytical chemistry, separation and enrichment steps serve not only as critical stages in the analytical workflow, but also as core technologies that determine the accuracy, reliability, and applicability of analytical methods. However, in conventional experimental instruction, this step is frequently overlooked owing to time constraints and an overemphasis on instrumental techniques, leading to fragmented knowledge structures and hindering the development of integrated analytical thinking that connects theory with practice. To address this issue, this study, based on the “knowledge-ability-practice” three-dimensional integrated teaching objective, innovatively establishes a “positive-negative case-based teaching” model, using the solid-phase microextraction (SPME) of six nitrogen-containing pesticides from environmental water samples as the instructional case. By comparing fibers coated with non-polar polydimethylsiloxane (PDMS) and strongly polar polyacrylate (PA), and employing high performance liquid chromatography with ultraviolet detection (HPLC-UV), this study systematically investigates the matching relationship between analyte polarity and coating properties. In the positive case, the PDMS coating demonstrates superior extraction performance for weakly polar pesticides based on the “like dissolves like” principle, with a linear coefficient of determination R2≥0.993 7 and detection limits ranging from 0.019 to 0.17 μg/L. In contrast, in the negative case, the PA coating shows weaker extraction efficiency due to differences in the extraction mechanism, yielding detection limits between 0.066 to 1.069 μg/L. Based on spiked recovery tests conducted on actual river water samples from Lanzhou (recoveries: 81.5% to 117%), a multi-dimensional evaluation system of “knowledge internalization, competency enhancement, and practical literacy” is established accordingly. Teaching feedback demonstrates that the students show a marked improvement in their understanding of the core principles, and their innovative thinking and problem-solving skills are effectively cultivated. The “contrasting-case-based” pedagogical approach effectively bridges theory and experiment while stimulating students’ investigative thinking. The study provides a replicable and scalable practical model for the reform of analytical chemistry experimental teaching, which holds significant value in cultivating high-caliber talents with rational method selection and problem-solving abilities.
- 1 June 2026
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 44 (6) , 713-720
Open AccessCase-based teaching with both positive and negative examples in undergraduate analytical chemistry laboratory: determination of six nitrogen-containing pesticides in environmental samples by solid-phase microextraction-high performance liquid chromatography
In analytical chemistry, separation and enrichment steps serve not only as critical stages in the analytical workflow, but also as core technologies that determine the accuracy, reliability, and applicability of analytical methods. However, in conventional experimental instruction, this step is frequently overlooked owing to time constraints and an overemphasis on instrumental techniques, leading to fragmented knowledge structures and hindering the development of integrated analytical thinking that connects theory with practice. To address this issue, this study, based on the “knowledge-ability-practice” three-dimensional integrated teaching objective, innovatively establishes a “positive-negative case-based teaching” model, using the solid-phase microextraction (SPME) of six nitrogen-containing pesticides from environmental water samples as the instructional case. By comparing fibers coated with non-polar polydimethylsiloxane (PDMS) and strongly polar polyacrylate (PA), and employing high performance liquid chromatography with ultraviolet detection (HPLC-UV), this study systematically investigates the matching relationship between analyte polarity and coating properties. In the positive case, the PDMS coating demonstrates superior extraction performance for weakly polar pesticides based on the “like dissolves like” principle, with a linear coefficient of determination R2≥0.993 7 and detection limits ranging from 0.019 to 0.17 μg/L. In contrast, in the negative case, the PA coating shows weaker extraction efficiency due to differences in the extraction mechanism, yielding detection limits between 0.066 to 1.069 μg/L. Based on spiked recovery tests conducted on actual river water samples from Lanzhou (recoveries: 81.5% to 117%), a multi-dimensional evaluation system of “knowledge internalization, competency enhancement, and practical literacy” is established accordingly. Teaching feedback demonstrates that the students show a marked improvement in their understanding of the core principles, and their innovative thinking and problem-solving skills are effectively cultivated. The “contrasting-case-based” pedagogical approach effectively bridges theory and experiment while stimulating students’ investigative thinking. The study provides a replicable and scalable practical model for the reform of analytical chemistry experimental teaching, which holds significant value in cultivating high-caliber talents with rational method selection and problem-solving abilities.
- Open Access
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Assemblage of spring-assisted pipette tip-solid-phase extraction based on hierarchical porous Copper-defect MOF-808 composite nanofiber membrane for efficient adsorption of endocrine disrupting chemicals
Endocrine disrupting chemicals (EDCs) are exogenous substances capable of interfering with the synthesis, secretion, transport, binding of endogenous hormones, thereby adversely affecting endocrine function, and posing substantial risks to human and ecological health. In order to accurately determine the concentration of EDCs and provide a basis for human and ecological health assessment. In this study, a nanofiber membrane (NFMs) was prepared using polyvinylpyrrolidone (PVP) as the sacrificial template and polyacrylonitrile (PAN) as the membrane substrate, at the same time, a copper-defect MOFs (MOF-808/Cu) was synthesized by doping copper to constructing mix-metal cluster. These two materials were then fabricated into a hierarchical porous copper-defect MOFs composite NFMs (H-MOF-808/Cu/PAN) via blend electrospinning. The prepared NFMs was employed as the stationary phase for spring-assisted pipette-tip-solid-phase extraction (SA-PT-SPE) and coupled with high performance liquid chromatography (HPLC) for the enrichment and detection of eight EDCs in real samples. Adsorption between the NFMs and the target analytes primarily proceeded through synergistic multiple interactions. Under optimized extraction conditions, the established method had rapid extraction speed (24 min), a wide linear range (0.799-1000 µg·L−1), recoveries ranging from 82.47% to 119.0% and RSDs below 3.847%. This experiment provided a mild strategy for preparing NFMs with multiple open adsorption sites, and improves the PT-SPE device by proposing a SA-PT-SPE device. By combining these two, a new method for detecting EDCs had been developed.
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAssemblage of spring-assisted pipette tip-solid-phase extraction based on hierarchical porous Copper-defect MOF-808 composite nanofiber membrane for efficient adsorption of endocrine disrupting chemicals
Endocrine disrupting chemicals (EDCs) are exogenous substances capable of interfering with the synthesis, secretion, transport, binding of endogenous hormones, thereby adversely affecting endocrine function, and posing substantial risks to human and ecological health. In order to accurately determine the concentration of EDCs and provide a basis for human and ecological health assessment. In this study, a nanofiber membrane (NFMs) was prepared using polyvinylpyrrolidone (PVP) as the sacrificial template and polyacrylonitrile (PAN) as the membrane substrate, at the same time, a copper-defect MOFs (MOF-808/Cu) was synthesized by doping copper to constructing mix-metal cluster. These two materials were then fabricated into a hierarchical porous copper-defect MOFs composite NFMs (H-MOF-808/Cu/PAN) via blend electrospinning. The prepared NFMs was employed as the stationary phase for spring-assisted pipette-tip-solid-phase extraction (SA-PT-SPE) and coupled with high performance liquid chromatography (HPLC) for the enrichment and detection of eight EDCs in real samples. Adsorption between the NFMs and the target analytes primarily proceeded through synergistic multiple interactions. Under optimized extraction conditions, the established method had rapid extraction speed (24 min), a wide linear range (0.799-1000 µg·L−1), recoveries ranging from 82.47% to 119.0% and RSDs below 3.847%. This experiment provided a mild strategy for preparing NFMs with multiple open adsorption sites, and improves the PT-SPE device by proposing a SA-PT-SPE device. By combining these two, a new method for detecting EDCs had been developed.
- Open Access
- 19 September 2025
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 43 (10) , 1145-1153
Simultaneous detection of 34 pesticide and metabolite residues in vegetables and fruits using improved QuEChERS-gas chromatography-tandem mass spectrometry with carboxylated multi-walled carbon nanotubes
With the rapid advancement of industrialization, agricultural intensification, and urbanization, issues pertaining to environmental pollution and food safety have become increasingly prominent. The use of pesticides plays a vital role in augmenting agricultural yield and quality, thereby serving as a foundational element of modern agriculture. However, improper or excessive application can lead to pesticide residues, which pose a significant threat to ecological systems and human health. Therefore, it is essential to enhance the surveillance of pesticide residue levels and to pioneer novel, efficient analytical methodologies. Sample pretreatment constitutes a crucial stage in the detection pipeline. Consequently, the development of rapid, green, and efficient sample pretreatment techniques has advanced significantly and gained widespread application in recent years. To effectively monitor pesticide residues in fruits and vegetables while reducing matrix interference, we established a high-throughput method for detecting 34 pesticides and their metabolites. This method utilizes a modified QuEChERS approach with carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) as a clean-up sorbent, followed by analysis with gas chromatography-tandem mass spectrometry (GC-MS/MS). The detection conditions for 34 pesticide and metabolite residues in fruits and vegetables were established through the optimization of the pretreatment process, chromatographic conditions, and mass spectrometry parameters. Specifically, fruit and vegetable samples were homogenized and extracted using a commercial QuEChERS EN extraction kit. Following shaking and centrifugation, the supernatant was transferred to a purification tube containing 10 mg of MWCNTs-COOH. Subsequently, this supernatant was evaporated to near-dryness under a gentle stream of nitrogen, reconstituted in ethyl acetate containing an internal standard, and filtered through a 0.22 μm nylon membrane filter. The target substances were separated on a HP-5MS UI quartz capillary column (30 m×0.25 mm×0.25 μm) with a programmed temperature gradient, detected by GC-MS/MS in multiple reaction monitoring (MRM) mode, and quantified using a matrix-matched internal standard calibration method. A full scan was performed across an m/z range of 45-500. Retention times and characteristic fragment ions were identified using the NIST mass spectral library. The most intense fragment ion was selected as the precursor ion. Parameters including dwell time and collision energy were then optimized to select the optimal product ion for each transition. Acetonitrile was selected as the optimal extraction solvent, and 10 mg was determined to be the optimal dosage of MWCNTs-COOH for purification. Under the optimized conditions, all 34 pesticides and metabolites demonstrated good linearities within their respective concentration ranges, with correlation coefficients (R²) greater than 0.997 4. The method demonstrated low limits of detection (LODs) and quantification (LOQs), ranging from 0.023 to 0.817 μg/kg and 0.077 to 2.696 μg/kg, respectively. At three spiked concentration levels (low, medium, and high), the recoveries for the 34 pesticides and metabolites ranged from 78.9% to 104.5%, with relative standard deviations (RSDs) of 1.0% to 7.8%. Additionally, matrix effects were evaluated for six types of fruits and vegetables at a spiked mass concentration of 0.2 μg/mL. The results indicated significant differences in matrix effects among the sample matrices. Chives exhibited the strongest matrix effect, followed by chili peppers and celery. Bananas, grapes, and peaches were the least affected. Overall, strong matrix effects were observed in over 20% of the analyte-matrix combinations, with vegetables generally exhibiting a stronger influence than fruits. The evaluation confirmed significant differences in matrix effects for the target pesticides and metabolites across the various sample matrices. Consequently, a matrix-matched calibration method was employed for accurate quantification to correct for these effects. The developed method demonstrates high purification efficiency, accuracy, and reproducibility, rendering it highly suitable for the simultaneous determination of multiple pesticide and metabolite residues in fruits and vegetables.
- 19 September 2025
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 43 (10) , 1145-1153
Open AccessSimultaneous detection of 34 pesticide and metabolite residues in vegetables and fruits using improved QuEChERS-gas chromatography-tandem mass spectrometry with carboxylated multi-walled carbon nanotubes
With the rapid advancement of industrialization, agricultural intensification, and urbanization, issues pertaining to environmental pollution and food safety have become increasingly prominent. The use of pesticides plays a vital role in augmenting agricultural yield and quality, thereby serving as a foundational element of modern agriculture. However, improper or excessive application can lead to pesticide residues, which pose a significant threat to ecological systems and human health. Therefore, it is essential to enhance the surveillance of pesticide residue levels and to pioneer novel, efficient analytical methodologies. Sample pretreatment constitutes a crucial stage in the detection pipeline. Consequently, the development of rapid, green, and efficient sample pretreatment techniques has advanced significantly and gained widespread application in recent years. To effectively monitor pesticide residues in fruits and vegetables while reducing matrix interference, we established a high-throughput method for detecting 34 pesticides and their metabolites. This method utilizes a modified QuEChERS approach with carboxylated multi-walled carbon nanotubes (MWCNTs-COOH) as a clean-up sorbent, followed by analysis with gas chromatography-tandem mass spectrometry (GC-MS/MS). The detection conditions for 34 pesticide and metabolite residues in fruits and vegetables were established through the optimization of the pretreatment process, chromatographic conditions, and mass spectrometry parameters. Specifically, fruit and vegetable samples were homogenized and extracted using a commercial QuEChERS EN extraction kit. Following shaking and centrifugation, the supernatant was transferred to a purification tube containing 10 mg of MWCNTs-COOH. Subsequently, this supernatant was evaporated to near-dryness under a gentle stream of nitrogen, reconstituted in ethyl acetate containing an internal standard, and filtered through a 0.22 μm nylon membrane filter. The target substances were separated on a HP-5MS UI quartz capillary column (30 m×0.25 mm×0.25 μm) with a programmed temperature gradient, detected by GC-MS/MS in multiple reaction monitoring (MRM) mode, and quantified using a matrix-matched internal standard calibration method. A full scan was performed across an m/z range of 45-500. Retention times and characteristic fragment ions were identified using the NIST mass spectral library. The most intense fragment ion was selected as the precursor ion. Parameters including dwell time and collision energy were then optimized to select the optimal product ion for each transition. Acetonitrile was selected as the optimal extraction solvent, and 10 mg was determined to be the optimal dosage of MWCNTs-COOH for purification. Under the optimized conditions, all 34 pesticides and metabolites demonstrated good linearities within their respective concentration ranges, with correlation coefficients (R²) greater than 0.997 4. The method demonstrated low limits of detection (LODs) and quantification (LOQs), ranging from 0.023 to 0.817 μg/kg and 0.077 to 2.696 μg/kg, respectively. At three spiked concentration levels (low, medium, and high), the recoveries for the 34 pesticides and metabolites ranged from 78.9% to 104.5%, with relative standard deviations (RSDs) of 1.0% to 7.8%. Additionally, matrix effects were evaluated for six types of fruits and vegetables at a spiked mass concentration of 0.2 μg/mL. The results indicated significant differences in matrix effects among the sample matrices. Chives exhibited the strongest matrix effect, followed by chili peppers and celery. Bananas, grapes, and peaches were the least affected. Overall, strong matrix effects were observed in over 20% of the analyte-matrix combinations, with vegetables generally exhibiting a stronger influence than fruits. The evaluation confirmed significant differences in matrix effects for the target pesticides and metabolites across the various sample matrices. Consequently, a matrix-matched calibration method was employed for accurate quantification to correct for these effects. The developed method demonstrates high purification efficiency, accuracy, and reproducibility, rendering it highly suitable for the simultaneous determination of multiple pesticide and metabolite residues in fruits and vegetables.
Catching Like an Octopus: Based on Structural Biomimetic Designed MOF‐on‐MOF Compatible Extracted Fiber for Sensitive Detection and Risk Assessment of Organophosphorus Pesticides
The detection and health risk assessment of organophosphorus pesticides (OPs) motivates the development of high‐throughput extraction technologies. Herein, metal‐organic framework (MOF‐on‐MOF) hybrids with octopus‐like structures (OL‐MNU) are prepared by a heteroepitaxial growth strategy inspired by structure biomimetic, the multi‐functionalized integration, open mass transfer pathways, and hierarchical porous structure of OL‐MNU are powerful guarantees for the efficient extraction of OPs. Hence, the OL‐MNU is used as solid‐phase microextraction (SPME) fiber coating and combined with gas chromatography tandem mass spectrometry (GC‐MS/MS) to compatible extraction and sensitive detection ten OPs. Trace OPs in nine different matrices are accurately detected, and the Hazard index (HI) is far less than 1 which indicated that the OPs residues in the test samples do not cause any significant effects on human health. Multiple characterizations are used to verify that the adsorption mechanism of the OL‐MNU is a combined effect of chemisorption forces such as hydrogen bonding, Zr‐O‐P bonding, LP‐π interactions, and π–π interactions, it agreed with the density functional theory (DFT) calculations. This study provided a reference for the future design of binary MOF composites with different structural features and provided a good idea for high‐throughput human health risk assessment of different pollutants.
Catching Like an Octopus: Based on Structural Biomimetic Designed MOF‐on‐MOF Compatible Extracted Fiber for Sensitive Detection and Risk Assessment of Organophosphorus Pesticides
The detection and health risk assessment of organophosphorus pesticides (OPs) motivates the development of high‐throughput extraction technologies. Herein, metal‐organic framework (MOF‐on‐MOF) hybrids with octopus‐like structures (OL‐MNU) are prepared by a heteroepitaxial growth strategy inspired by structure biomimetic, the multi‐functionalized integration, open mass transfer pathways, and hierarchical porous structure of OL‐MNU are powerful guarantees for the efficient extraction of OPs. Hence, the OL‐MNU is used as solid‐phase microextraction (SPME) fiber coating and combined with gas chromatography tandem mass spectrometry (GC‐MS/MS) to compatible extraction and sensitive detection ten OPs. Trace OPs in nine different matrices are accurately detected, and the Hazard index (HI) is far less than 1 which indicated that the OPs residues in the test samples do not cause any significant effects on human health. Multiple characterizations are used to verify that the adsorption mechanism of the OL‐MNU is a combined effect of chemisorption forces such as hydrogen bonding, Zr‐O‐P bonding, LP‐π interactions, and π–π interactions, it agreed with the density functional theory (DFT) calculations. This study provided a reference for the future design of binary MOF composites with different structural features and provided a good idea for high‐throughput human health risk assessment of different pollutants.