Jigisha Kamal Parikh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jigisha Kamal Parikh has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Meghal A. Desai
Department of Chemical Engineering Sardar Vallabhbhai National Institute of Technology Surat India
11 shared publications Sanjay Srivastava
Department of Chemical Engineering , Government Engineering College , Valsad - 396001 , Gujarat , India
6 shared publications- Kalpana C. Maheria
Department of Chemistry, Sardar Vallabhbhai National Institute of Technology, Ichchhanath, Surat, India
5 shared publications - Vijay Patel
Department of Chemistry, Navyug Science College, Rander Road, Surat-395009, Gujarat, India
4 shared publications Darshak R. Bhatt
Applied Chemistry Department, Sardar Vallabhbhai National Institute of Technology, Surat 395007, Gujarat, India
3 shared publicationsG. C. Jadeja
Department of Chemical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, India
3 shared publications
Latest Publications
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28  (24) , 14872-14890
Role of unsaturation in governing synergistic micellization and interaction energetics in ionic liquid–fatty acid systems
Self-assembly of C 10 C 10 mim Cl with sodium oleate and sodium linoleate forms stable mixed micelles with enhanced hydrophobic domains, leading to improved micellization behavior and efficient ibuprofen solubilization in aqueous medium.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28  (24) , 14872-14890
Role of unsaturation in governing synergistic micellization and interaction energetics in ionic liquid–fatty acid systems
Self-assembly of C 10 C 10 mim Cl with sodium oleate and sodium linoleate forms stable mixed micelles with enhanced hydrophobic domains, leading to improved micellization behavior and efficient ibuprofen solubilization in aqueous medium.
- 18 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130  (13) , 3776-3795
Additive-Driven Micellar Growth and Morphological Transitions in Tetronic Block Copolymers: Insights from Experimental and Computational Study
The self-assembly of Tetronics® block copolymers is strongly influenced by additives that modify hydration and interfacial packing within micellar structures. Here, we investigate how octanoic acid (OA) and perfluorooctanoic acid (PFOA) alter the solution behavior of Tetronics® T1304 and T1307 using a combination of cloud point (CP), relative viscosity (ηrel) small-angle neutron scattering (SANS), dynamic light scattering (DLS), transmission electron microscopy (TEM), pyrene fluorescence, and density functional theory (DFT) calculations. In the presence of OA, T1304 exhibits pronounced micellar growth, progressing from spherical to ellipsoidal aggregates and, at higher concentrations, to vesicular structures. These changes arise from OA-induced dehydration of the PEO corona and enhanced packing of PPO domains, as confirmed by increases in aggregation number, low-Q scattering intensity, and a marked decrease in the pyrene I1/I3 ratio. In contrast, PFOA produces only modest changes in micellar size while preserving spherical topology over the same concentration range. Although DFT analysis indicates stronger electronic stabilization for Tetronics®–PFOA complexes than for OA, the rigid and lipophobic nature of the fluorocarbon chain limits its ability to penetrate the PPO core and drive curvature changes. The combined experimental and computational results show that additive-induced dehydration and steric compatibility, rather than electronic affinity alone, determine the structural evolution of Tetronics® micelles.
- 18 March 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130  (13) , 3776-3795
Additive-Driven Micellar Growth and Morphological Transitions in Tetronic Block Copolymers: Insights from Experimental and Computational Study
The self-assembly of Tetronics® block copolymers is strongly influenced by additives that modify hydration and interfacial packing within micellar structures. Here, we investigate how octanoic acid (OA) and perfluorooctanoic acid (PFOA) alter the solution behavior of Tetronics® T1304 and T1307 using a combination of cloud point (CP), relative viscosity (ηrel) small-angle neutron scattering (SANS), dynamic light scattering (DLS), transmission electron microscopy (TEM), pyrene fluorescence, and density functional theory (DFT) calculations. In the presence of OA, T1304 exhibits pronounced micellar growth, progressing from spherical to ellipsoidal aggregates and, at higher concentrations, to vesicular structures. These changes arise from OA-induced dehydration of the PEO corona and enhanced packing of PPO domains, as confirmed by increases in aggregation number, low-Q scattering intensity, and a marked decrease in the pyrene I1/I3 ratio. In contrast, PFOA produces only modest changes in micellar size while preserving spherical topology over the same concentration range. Although DFT analysis indicates stronger electronic stabilization for Tetronics®–PFOA complexes than for OA, the rigid and lipophobic nature of the fluorocarbon chain limits its ability to penetrate the PPO core and drive curvature changes. The combined experimental and computational results show that additive-induced dehydration and steric compatibility, rather than electronic affinity alone, determine the structural evolution of Tetronics® micelles.
- Open Access
- 20 January 2026
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 14  (1) , 229-236
Experimental Investigation on The Gasification of High-Ash Indian Coal and Biomass in a Bubbling Fluidized Bed using Air and Steam
India produces significant amounts of biomass waste, including sugarcane bagasse and sawdust, as well as low-grade, high-ash coal – resources that are not fully tapped into despite their considerable energy potential. Gasification provides a clean and efficient technique for transforming these raw materials into valuable energy sources. This research outlines the design and development of a bubbling fluidized bed gasifier capable of handling high-ash coal (46% ash) and biomass, utilizing air and steam as gasifying agents. Experiments were performed to assess the effects of equivalence ratio (ER), temperature, and steam-to biomass (S/B) ratio on syngas composition. Raising the temperature from 500°C to 700°C significantly enhanced H2 and CO production across all feedstocks, indicating improved gasification efficiency at high temperatures. H2 concentrations increased from 6.7% to 9.1% for sawdust, 10.3–17.5% for bagasse, and 11.4–15.2% for high-ash coal. The optimal ER values for enhancing syngas quality were determined to be 0.35 for biomass and 0.43 for coal. Increasing the S/B ratio from 0.5 to 0.7 significantly increased H2 content, achieving 25.1% for sawdust and 23.3% for bagasse, attributed to the water-gas shift reaction. The energy balance analysis indicated energy outputs of 12.13 MJ/kg for sawdust, 16.79 MJ/kg for bagasse, and 17.72 MJ/kg for high-ash coal. These results validate the technical feasibility and operational versatility of the gasifier for various feedstocks. The research provides essential insights for optimizing gasification parameters, aiding in cleaner energy production and more efficient use of biomass and coal resources in India .
- 20 January 2026
- Published by Koya University in ARO-THE SCIENTIFIC JOURNAL OF KOYA UNIVERSITY
- Vol. 14  (1) , 229-236
Open AccessExperimental Investigation on The Gasification of High-Ash Indian Coal and Biomass in a Bubbling Fluidized Bed using Air and Steam
India produces significant amounts of biomass waste, including sugarcane bagasse and sawdust, as well as low-grade, high-ash coal – resources that are not fully tapped into despite their considerable energy potential. Gasification provides a clean and efficient technique for transforming these raw materials into valuable energy sources. This research outlines the design and development of a bubbling fluidized bed gasifier capable of handling high-ash coal (46% ash) and biomass, utilizing air and steam as gasifying agents. Experiments were performed to assess the effects of equivalence ratio (ER), temperature, and steam-to biomass (S/B) ratio on syngas composition. Raising the temperature from 500°C to 700°C significantly enhanced H2 and CO production across all feedstocks, indicating improved gasification efficiency at high temperatures. H2 concentrations increased from 6.7% to 9.1% for sawdust, 10.3–17.5% for bagasse, and 11.4–15.2% for high-ash coal. The optimal ER values for enhancing syngas quality were determined to be 0.35 for biomass and 0.43 for coal. Increasing the S/B ratio from 0.5 to 0.7 significantly increased H2 content, achieving 25.1% for sawdust and 23.3% for bagasse, attributed to the water-gas shift reaction. The energy balance analysis indicated energy outputs of 12.13 MJ/kg for sawdust, 16.79 MJ/kg for bagasse, and 17.72 MJ/kg for high-ash coal. These results validate the technical feasibility and operational versatility of the gasifier for various feedstocks. The research provides essential insights for optimizing gasification parameters, aiding in cleaner energy production and more efficient use of biomass and coal resources in India .
- 10 October 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64  (42) , 20122-20136
Synergistic Micellization and Vesicle Formation in Bile Salts and Dihexadecyldimethylammonium Bromide Mixed Systems
- 10 October 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64  (42) , 20122-20136
Synergistic Micellization and Vesicle Formation in Bile Salts and Dihexadecyldimethylammonium Bromide Mixed Systems
- 5 May 2025
- Published by Springer Nature in Chemical Papers
- Vol. 79  (7) , 4229-4246
Hydrogenation of xylose to xylitol: interactive parametric, optimization and kinetic study
- 5 May 2025
- Published by Springer Nature in Chemical Papers
- Vol. 79  (7) , 4229-4246
Hydrogenation of xylose to xylitol: interactive parametric, optimization and kinetic study
- 25 May 2024
- Published by Springer Nature
- p. 125-152
Food Waste Biorefinery
- 21 April 2024
- Published by Elsevier in Bioresource Technology Reports
- Vol. 26
Synthesis and characterization of composite films derived from lemongrass leaves: A valorization approach
- 21 April 2024
- Published by Elsevier in Bioresource Technology Reports
- Vol. 26
Synthesis and characterization of composite films derived from lemongrass leaves: A valorization approach
- 8 January 2024
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 22  (3) , 323-331
Optimization and kinetics study for the conversion of furfuryl alcohol towards ethyl levulinate using sulfonic acid functionalized catalyst
In the present work, furfuryl alcohol (FAL) alcoholysis towards ethyl levulinate (EL) was studied over a mesoporous SO 3 H-SBA-15 catalyst. The effect of various operating parameters i.e., temperature, catalyst dose, furfuryl alcohol amount, and time was studied and optimized via robust Response Surface Methodology through central composite rotatable designs (CCRD) method on the conversion of FAL to EL. According to Response Surface Methodology, under optimum reaction conditions viz. temperature 110 °C, catalyst dose 0.42 g, time 3 h, and FAL amount of 1.46 g, maximum EL yield (95 %) was recorded. Further, the effect of reaction parameters on the kinetics of the said reaction was also examined, suggesting the second-order kinetic concerning all operating parameters. Eventually, the reusability of the catalyst is evident in a decrease of almost 40 % yield towards EL in the fourth cycle.
- 8 January 2024
- Published by Walter de Gruyter GmbH in International Journal of Chemical Reactor Engineering
- Vol. 22  (3) , 323-331
Optimization and kinetics study for the conversion of furfuryl alcohol towards ethyl levulinate using sulfonic acid functionalized catalyst
In the present work, furfuryl alcohol (FAL) alcoholysis towards ethyl levulinate (EL) was studied over a mesoporous SO 3 H-SBA-15 catalyst. The effect of various operating parameters i.e., temperature, catalyst dose, furfuryl alcohol amount, and time was studied and optimized via robust Response Surface Methodology through central composite rotatable designs (CCRD) method on the conversion of FAL to EL. According to Response Surface Methodology, under optimum reaction conditions viz. temperature 110 °C, catalyst dose 0.42 g, time 3 h, and FAL amount of 1.46 g, maximum EL yield (95 %) was recorded. Further, the effect of reaction parameters on the kinetics of the said reaction was also examined, suggesting the second-order kinetic concerning all operating parameters. Eventually, the reusability of the catalyst is evident in a decrease of almost 40 % yield towards EL in the fourth cycle.
- 13 April 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 142, 105853
Perivascular patch using biodegradable polymers: Investigation of mechanical and drug elution characteristics
- 13 April 2023
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 142, 105853
Perivascular patch using biodegradable polymers: Investigation of mechanical and drug elution characteristics
- 6 February 2023
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 635, 122668
Advances and trends in encapsulation of essential oils
- 6 February 2023
- Published by Elsevier in International Journal of Pharmaceutics
- Vol. 635, 122668
Advances and trends in encapsulation of essential oils