Dena Z. Khater
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dena Z. Khater has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Kamel M. El-Khatib
Chemical Engineering Department, Engineering Research and Renewable Energy Institute, National Research Centre, 33 El Buhouth St., Dokki, Cairo 12622, Egypt
7 shared publications - Rabeay Y. A. Hassan
Biosensors Research Lab, Zewail City of Science and Technology, 6th October City, Giza 12578, Egypt
3 shared publications - Helmy Mohamed Hassan
Microbial Chemistry Department, National Research Centre, Cairo, Egypt
2 shared publications - Ahmed H. El-Attar
Biotechnology and Biomolecular Chemistry Department, Faculty of Science, Cairo University, Giza, Egypt
1 shared publication - Amro Hassanein
Yokogawa Corporation of America, Sugar Land, TX 77478, USA
1 shared publication - Esraa M. Abdelhalim
Biotechnology Department, Faculty of Science, Cairo University, Giza, Egypt
1 shared publication
Latest Publications
- Open Access
- 13 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 25197
Activated biochar derived from agricultural and aquatic waste biomass supported on stainless steel mesh for sustainable hydrogen evolution reaction in neutral media
This work demonstrates a sustainable, scalable, and metal-free approach for converting agricultural waste and aquatic waste biomass (e.g., orange peel (OP), banana peel (BP), rice straw (RS), corn cob (CC), and water hyacinth (WH) into activated biochar while emphasizing the inherent kinetic limitations of hydrogen evolution (HER) in neutral electrolytes. A key challenge in HER under neutral conditions is the sluggish reaction kinetics caused by limited proton availability and slow water dissociation. Comprehensive characterization using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and transmission electron microscopy (TEM) confirmed the formation of activated biochar with a layered carbon structure. Among the investigated materials, RS-, WH-, and CC-derived activated biochar exhibited improved HER performance, requiring overpotentials of 432–436 mV to achieve a current density of 10 mA cm⁻². Electrochemical analysis revealed reduced charge-transfer resistance and increased electrochemically active surface area, contributing to enhanced HER performance. Their corresponding Tafel slopes (323.2–352.4 mV dec⁻¹) are significantly lower than those of OP/SSM (533.5 mV dec⁻¹), BP/SSM (398.2 mV dec⁻¹), and commercial activated carbon as a control (651.67mV dec⁻¹). The enhanced performance is attributed to increased porosity, layered carbon morphology, the presence of intrinsic heteroatoms and mineral phases, improved electrochemically active surface area, and reduced charge-transfer resistance. This work demonstrates a sustainable and metal-free strategy for producing carbon-based electrocatalysts, while highlighting the limitations and challenges associated with HER in neutral electrolytes.
- 13 August 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 25197
Open AccessActivated biochar derived from agricultural and aquatic waste biomass supported on stainless steel mesh for sustainable hydrogen evolution reaction in neutral media
This work demonstrates a sustainable, scalable, and metal-free approach for converting agricultural waste and aquatic waste biomass (e.g., orange peel (OP), banana peel (BP), rice straw (RS), corn cob (CC), and water hyacinth (WH) into activated biochar while emphasizing the inherent kinetic limitations of hydrogen evolution (HER) in neutral electrolytes. A key challenge in HER under neutral conditions is the sluggish reaction kinetics caused by limited proton availability and slow water dissociation. Comprehensive characterization using X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and transmission electron microscopy (TEM) confirmed the formation of activated biochar with a layered carbon structure. Among the investigated materials, RS-, WH-, and CC-derived activated biochar exhibited improved HER performance, requiring overpotentials of 432–436 mV to achieve a current density of 10 mA cm⁻². Electrochemical analysis revealed reduced charge-transfer resistance and increased electrochemically active surface area, contributing to enhanced HER performance. Their corresponding Tafel slopes (323.2–352.4 mV dec⁻¹) are significantly lower than those of OP/SSM (533.5 mV dec⁻¹), BP/SSM (398.2 mV dec⁻¹), and commercial activated carbon as a control (651.67mV dec⁻¹). The enhanced performance is attributed to increased porosity, layered carbon morphology, the presence of intrinsic heteroatoms and mineral phases, improved electrochemically active surface area, and reduced charge-transfer resistance. This work demonstrates a sustainable and metal-free strategy for producing carbon-based electrocatalysts, while highlighting the limitations and challenges associated with HER in neutral electrolytes.
- Open Access
- 15 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6125
From Olive Waste to Bioelectricity: Integrated Substrate Recovery and Biochar Cathode Engineering for Advanced Microbial Fuel Cells
The increasing demand for sustainable energy and efficient wastewater treatment has driven interest in single-chamber microbial fuel cells (SCMFCs) as integrated systems for bioelectricity generation and waste remediation. This study evaluates untreated agro-industrial byproduct olive mill wastewater (OMW) as a substrate in SCMFCs. It investigates the performance of activated biochar derived from olive pomace coated on stainless-steel mesh (ACB/SSM) as a low-cost cathode material. A synthetic media was used as a control. Electrochemical performance was assessed using voltage profiles, polarization analysis, power density, chemical oxygen demand (COD%) removal, and coulombic efficiency (CE%). The synthetic media achieved higher peak voltage (0.647 ± 0.026 V) and power density (46.05 mW m−2), whereas OMW showed more stable voltage output and lower internal resistance. OMW exhibited superior initial COD removal (74%) and a gradual increase in CE% up to 63% over successive cycles. In contrast, synthetic media exhibited a consistent COD% of 64%; its CE% removal improved to 61%. These results demonstrate that, despite lower peak power, OMW provides a more stable and sustainable substrate for long-term SCMFC operation. The use of waste-derived biochar cathodes further enhances system feasibility by reducing cost and supporting circular economy principles. This study highlights the potential of OMW-based SCMFCs as a practical approach for simultaneous wastewater treatment and renewable energy recovery.
- 15 June 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (12) , 6125
Open AccessFrom Olive Waste to Bioelectricity: Integrated Substrate Recovery and Biochar Cathode Engineering for Advanced Microbial Fuel Cells
The increasing demand for sustainable energy and efficient wastewater treatment has driven interest in single-chamber microbial fuel cells (SCMFCs) as integrated systems for bioelectricity generation and waste remediation. This study evaluates untreated agro-industrial byproduct olive mill wastewater (OMW) as a substrate in SCMFCs. It investigates the performance of activated biochar derived from olive pomace coated on stainless-steel mesh (ACB/SSM) as a low-cost cathode material. A synthetic media was used as a control. Electrochemical performance was assessed using voltage profiles, polarization analysis, power density, chemical oxygen demand (COD%) removal, and coulombic efficiency (CE%). The synthetic media achieved higher peak voltage (0.647 ± 0.026 V) and power density (46.05 mW m−2), whereas OMW showed more stable voltage output and lower internal resistance. OMW exhibited superior initial COD removal (74%) and a gradual increase in CE% up to 63% over successive cycles. In contrast, synthetic media exhibited a consistent COD% of 64%; its CE% removal improved to 61%. These results demonstrate that, despite lower peak power, OMW provides a more stable and sustainable substrate for long-term SCMFC operation. The use of waste-derived biochar cathodes further enhances system feasibility by reducing cost and supporting circular economy principles. This study highlights the potential of OMW-based SCMFCs as a practical approach for simultaneous wastewater treatment and renewable energy recovery.
- Open Access
- 2 June 2026
- Published by Springer Nature in Materials for Renewable and Sustainable Energy
- Vol. 15 (2)
Microbial electrolysis cell (MEC) as a promising renewable clean technology for green hydrogen and value-added compounds production: towards achieving sustainable development goals
Microbial electrolysis cells (MECs) represent a promising strategy for simultaneously treating wastewater, generating green hydrogen, and producing various biobased products, while minimizing environmental impact in alignment with the Sustainable Development Goals (SDGs). These systems have been extensively integrated with bioelectrochemical processes and renewable energy sources, such as solar and wind power, offering a viable pathway for sustainable development. This review provides a comprehensive summary and analysis of MEC's technology, tracing its evolution from its first discovery in 2004 to the present day. The data analyzed were collected from approximately 2000 papers published since 2004, with a particular focus on studies related to the production of green hydrogen, methane, and high-value-added products. Additionally, the review addresses the various challenges associated with MECs, highlighting innovations in design, operational strategies, and anticipated integration with other renewable energy systems. In conclusion, this work outlines a roadmap for future advancements, providing insights into the potential of MECs for hydrogen production, renewable biochemicals, and environmental applications. This framework aims to facilitate the transition from laboratory-scale experiments to industrial-scale implementation.
- 2 June 2026
- Published by Springer Nature in Materials for Renewable and Sustainable Energy
- Vol. 15 (2)
Open AccessMicrobial electrolysis cell (MEC) as a promising renewable clean technology for green hydrogen and value-added compounds production: towards achieving sustainable development goals
Microbial electrolysis cells (MECs) represent a promising strategy for simultaneously treating wastewater, generating green hydrogen, and producing various biobased products, while minimizing environmental impact in alignment with the Sustainable Development Goals (SDGs). These systems have been extensively integrated with bioelectrochemical processes and renewable energy sources, such as solar and wind power, offering a viable pathway for sustainable development. This review provides a comprehensive summary and analysis of MEC's technology, tracing its evolution from its first discovery in 2004 to the present day. The data analyzed were collected from approximately 2000 papers published since 2004, with a particular focus on studies related to the production of green hydrogen, methane, and high-value-added products. Additionally, the review addresses the various challenges associated with MECs, highlighting innovations in design, operational strategies, and anticipated integration with other renewable energy systems. In conclusion, this work outlines a roadmap for future advancements, providing insights into the potential of MECs for hydrogen production, renewable biochemicals, and environmental applications. This framework aims to facilitate the transition from laboratory-scale experiments to industrial-scale implementation.
- Open Access
- 24 January 2022
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 20 (1) , 12-16
The enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst
- 24 January 2022
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 20 (1) , 12-16
Open AccessThe enhancement of microbial fuel cell performance by anodic bacterial community adaptation and cathodic mixed nickel–copper oxides on a graphene electrocatalyst
- Open Access
- 1 December 2018
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 16 (2) , 369-373
Effect of vitamins and cell constructions on the activity of microbial fuel cell battery
- 1 December 2018
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 16 (2) , 369-373
Open AccessEffect of vitamins and cell constructions on the activity of microbial fuel cell battery
- 17 June 2017
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 184 (1) , 92-101
Exploring the Bioelectrochemical Characteristics of Activated Sludge Using Cyclic Voltammetry
Due to the potential interest, bioelectrochemical responses of activated sludge using the three-electrode system are tested. From the cyclic voltammograms, the oxidation current output is increasing due to incubation time increase, whereas 5, 25 and 39.33 μA are obtained after 3, 72 and 96 h, respectively. Changing the working electrode from glassy carbon to carbon paste led to the increase in the electrochemical signal from 0.3 to be 3.72 μA. On the other hand, the use of the lipophilic redox mediator (2,6-dichlorophenolindophenol (DCIP)) amplified the oxidation current to reach 19.9 μA instead of 2.1 μA. Based on these findings, the mixed microbial community of the activated sludge is exploited as a catalyst for the bio-oxidation of the degradable organic substrates, while DCIP is used as a mobile electron carrier from the intracellular matrix of the metabolically active cells to the carbon paste electrode which served as the final electron acceptor. Therefore, the extracellular electron transfer from the formed active biofilm at the electrode surface is assisted by the existence of DCIP.
- 17 June 2017
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 184 (1) , 92-101
Exploring the Bioelectrochemical Characteristics of Activated Sludge Using Cyclic Voltammetry
Due to the potential interest, bioelectrochemical responses of activated sludge using the three-electrode system are tested. From the cyclic voltammograms, the oxidation current output is increasing due to incubation time increase, whereas 5, 25 and 39.33 μA are obtained after 3, 72 and 96 h, respectively. Changing the working electrode from glassy carbon to carbon paste led to the increase in the electrochemical signal from 0.3 to be 3.72 μA. On the other hand, the use of the lipophilic redox mediator (2,6-dichlorophenolindophenol (DCIP)) amplified the oxidation current to reach 19.9 μA instead of 2.1 μA. Based on these findings, the mixed microbial community of the activated sludge is exploited as a catalyst for the bio-oxidation of the degradable organic substrates, while DCIP is used as a mobile electron carrier from the intracellular matrix of the metabolically active cells to the carbon paste electrode which served as the final electron acceptor. Therefore, the extracellular electron transfer from the formed active biofilm at the electrode surface is assisted by the existence of DCIP.
- Open Access
- 1 June 2017
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 15 (1) , 127-137
Microbial diversity structure in acetate single chamber microbial fuel cell for electricity generation
- 1 June 2017
- Published by Elsevier in Journal of Genetic Engineering and Biotechnology
- Vol. 15 (1) , 127-137
Open AccessMicrobial diversity structure in acetate single chamber microbial fuel cell for electricity generation
- 31 January 2015
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 175 (7) , 3519-3530
Development of Bioelectrochemical System for Monitoring the Biodegradation Performance of Activated Sludge
In the microbial electrochemical system (MES), the microbial-electrode interactions are often regulated by the metabolic pathway and respiratory activities. To improve the efficiency of MES, there is a need to introduce a microbial community that provides a continuous oxidation of organic substrates with a sustainable current output. Thus, activated sludge was suggested and the rapid evaluation of its biodegradation activity, using cyclic voltammetry, was performed. Stimulation of the metabolic pathway led to the appearance of an oxidation peak current (22 μA/cm2, at about 750 mV), whereas the electrochemical signals were originated only from the metabolically active microbes. Cell viability, cultivation time, type, and concentration of the degradable organic substrates have been identified as major regulators for the electrocatalytic performance. From two different microbial communities, the generated electrochemical signal of the aerobic activated sludge was more than twofold higher in converting the degradable organic substrates (glucose, acetate, and succinate at 10 g/L) into oxidation current. On the other hand, the secretion of electroactive metabolite(s) in the extracellular matrix was determined as a source of electrochemical signal. Moreover, the mechanism(s) of the microbe-electrode interactions were demonstrated. Therefore, the current bioelectrochemical system could be used as a platform for monitoring the rate of substrate degradation as well as measuring the metabolic pathway activity.
- 31 January 2015
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 175 (7) , 3519-3530
Development of Bioelectrochemical System for Monitoring the Biodegradation Performance of Activated Sludge
In the microbial electrochemical system (MES), the microbial-electrode interactions are often regulated by the metabolic pathway and respiratory activities. To improve the efficiency of MES, there is a need to introduce a microbial community that provides a continuous oxidation of organic substrates with a sustainable current output. Thus, activated sludge was suggested and the rapid evaluation of its biodegradation activity, using cyclic voltammetry, was performed. Stimulation of the metabolic pathway led to the appearance of an oxidation peak current (22 μA/cm2, at about 750 mV), whereas the electrochemical signals were originated only from the metabolically active microbes. Cell viability, cultivation time, type, and concentration of the degradable organic substrates have been identified as major regulators for the electrocatalytic performance. From two different microbial communities, the generated electrochemical signal of the aerobic activated sludge was more than twofold higher in converting the degradable organic substrates (glucose, acetate, and succinate at 10 g/L) into oxidation current. On the other hand, the secretion of electroactive metabolite(s) in the extracellular matrix was determined as a source of electrochemical signal. Moreover, the mechanism(s) of the microbe-electrode interactions were demonstrated. Therefore, the current bioelectrochemical system could be used as a platform for monitoring the rate of substrate degradation as well as measuring the metabolic pathway activity.