MYMin Yang

Min Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Min Yang has a total of 77 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Pectin/chitosan oligosaccharide complexation with heat rearranges partially β-casein-released micellar casein for Pickering foam stabilization

    by Deqian Ke, Min Yang, Jian He, Juan Wu, Hui Du, Rui Yang, Jun Xu, Caiyun Wang

    Micellar casein with partially released β-casein (MCR) is an underutilized low-value dairy by-product. Herein, MCR–polysaccharide complexes were prepared via pectin (P)/chitosan oligosaccharide (CO) complexation combined with thermal treatment (60 °C, 30 min) to enhance foaming performance and reveal the interfacial stabilization mechanism. Synergistic P complexation and heating reduced MCR particle size from 176.25 ± 1.42 nm to 159.88 ± 1.55 nm, while CO modification increased it to 201.51 ± 2.36 nm. MCR-P displayed uniform spherical particles, whereas CO triggered mild aggregation. The combined modification improved MCR solubility and lowered surface tension. MCR-P-60 possessed optimal foaming capacity (66.11 ± 3.46%) and foam stability (61.66 ± 4.41%), rising by 111.76% and 2822.27%, respectively. MCR-CO-60 also exhibited much better foaming properties (62.22 ± 1.92% and 55.00 ± 1.67%) than native MCR (31.22 ± 2.58% and 2.11 ± 0.51%). The synergistic treatment facilitated MCR interfacial adsorption and thickened the interfacial film.

  • Micellar Casein‐Based Emulsion Gels: Characteristics and Property Regulation by Pectin/Chitosan Oligosaccharide

    by Wei Ji, Min Yang, Deqian Ke

    Emulsion gels are widely used in the food industry, yet precise control of their gelation and structural characteristics remains challenging. Micellar casein (MC) forms emulsion gels via shear‐induced jamming transition, whereas its critical gelation rules and intermolecular mechanisms are unclear. This work established jamming gelation criteria for MC‐based emulsion gels. Emulsion gels were fabricated by one‐step homogenization at oil fractions of 0.65–0.75 with 1%–8% MC; stronger shear was needed at lower oil fractions. Gel‐like structures formed across various MC concentrations, yet long‐term stability strongly depended on concentration, and 5%–6% MC yielded uniform jammed droplet networks with optimal storage stability. Subsequently, negatively charged pectin (P) and positively charged chitosan oligosaccharide (CO) were utilized to tailor gel properties through opposite electrostatic interactions. Two preparation routes for emulsion gels were adopted: one‐step homogenization after premixing P/CO with MC, and two‐step homogenization where P/CO was incorporated into pre‐formed MC‐based gels. Both polysaccharides greatly enhanced the storage, pH and thermal stability of 4% MC gels, extending shelf life beyond 240 days. P–MC systems relied mainly on electrostatic repulsion and synergistic hydrogen bonding, whereas CO–MC gels were dominated by electrostatic attraction to thicken interfacial films and raise viscoelasticity. The one‐step method suited MC‐only and P–MC emulsion gels, whereas two‐step preparation optimized CO–MC gel's microstructure and rheology. This study elucidates MC jamming gelation thresholds and two oppositely charged polysaccharides modulation mechanisms, offering references for designing high‐performance food‐grade emulsion gels. Practical Applications: The established jamming gelation criteria and electrostatic modulation by pectin or chitosan oligosaccharide can guide scalable production of micellar casein emulsion gels in food manufacturing. Selective use of the two polysaccharides together with matched preparation procedures enables tailored gel microstructure, rheology and environmental stability. This research provides feasible technical strategies for the development of high‐stability and performance‐tunable emulsion gels.

  • Open Access

    EGCG co-pigmentation combined with maltodextrin loading for betalain stabilization: characteristics, stability and application

    by Wenjuan Zhang, Min Yang, Wei Ji, Ting Wang

    Betalains (BT) are desirable natural edible pigments, but poor stability seriously limits their application in food industry. In this study, maltodextrin (MD) encapsulation combined with EGCG co-pigmentation was employed to enhance BT stability, and differences in protective effects between single MD encapsulation and synergistic dual modification were investigated. The results demonstrated that EGCG bound with BT mainly through hydrogen bonding, effectively reducing BT aggregation. The optimal BT2-E-MD1 sample exhibited significantly improved thermal performance, with its BT retention rate increasing from (11.06 ± 0.21)% of free BT to (52.43 ± 1.73)% after 75 °C treatment and its degradation half-life extended to 4.31-fold of that of free BT. Moreover, the synergistic MD–EGCG system greatly improved BT stability under variable pH conditions, metal ion (Mg2+ and Cu2+) interference and oxidative stress, and presented outstanding color retention ability in gummy candies, which provides a feasible strategy for expanding the practical application of BT.

  • Open Access

    Synergistic modification of micellar casein with partial β‐casein release using physical treatments combined with glycerol/β‐cyclodextrin for improved emulsion fabrication

    by Wei Ji, Min Yang, Jiali Tuo, Jian He, Hui Du, Juan Wu, Rui Yang, Jun Xu, Caiyun Wang

    Micellar casein with partial release of β-casein (MC) was used as the model protein to explore the synergistic effects of combined physical treatments (pH-shifting, ultrasonic treatment, and heat treatment) and small-molecule modifiers (glycerol, Gly; β-cyclodextrin, CD) on its structural conformation and interfacial behavior. The results showed that combined physical treatment synergized with CD significantly decreased the particle size of MC from 333.20 ± 4.55 nm to 233.38 ± 1.05 nm. The synergistic modification of physical treatments with Gly and CD reduced the relative content of α-helix structure and increased the proportion of random coil structure in MC. In addition, physical modification combined with Gly and/or CD significantly lowered the interfacial tension and improved the surface hydrophobicity of MC. The droplet size of emulsions stabilized by physically Gly/CD-co-modified MC was significantly smaller than that of native MC emulsions. The emulsions stabilized by C-Gly→CD-MC and C-CD-MC possessed favorable stability.

  • Open Access

    Micellar casein-based emulsion gels: characteristics and property regulation by pectin or chitosan oligosaccharide

    by Wei Ji, Min Yang, Deqian Ke

    Emulsion gels are widely used in the food industry, yet their targeted regulation remains difficult. Micellar casein (MC) forms emulsion gels through shear-induced jamming transition, whose critical gelation conditions and regulatory mechanisms were systematically investigated herein. Stable gels were obtained via one-step homogenization at oil fractions of 0.65–0.70 and MC contents of 1%–8%. A moderate MC concentration (4%–6%) produced uniform gel networks, while higher MC content refined droplets and enhanced viscoelasticity. Negatively charged pectin and positively charged chitosan oligosaccharide improved gel stability via distinct electrostatic interactions: repulsion optimized microstructure and water retention, whereas attraction strengthened interfacial layers and viscoelasticity. This work clarifies MC gelation criteria and dual electrostatic modulation mechanisms, offering theoretical guidance for designing high-performance food emulsion gels.

  • Open Access

    Characteristics of high internal phase emulsion gel stabilized by micellar casein-pectin/chitosan oligosaccharide

    by Deqian Ke, Min Yang, Wei Ji

    Emulsion gels prepared from single proteins or polysaccharides generally suffer from poor stability, while conventional emulsion gels also exhibit deficiencies such as complicated preparation processes and high production costs. In this study, using micellar casein (MC) as the matrix and anionic polysaccharide pectin (P) or cationic polysaccharide chitosan oligosaccharide (CO) as fillers, an O/W high internal phase emulsion gel with a 75% oil phase volume fraction were prepared via a simple one-step homogenization method. The results demonstrated that the storage stability of MC-based emulsion gels was significantly enhanced with addition of P/CO. The average oil droplet size decreased from (42.77 ± 16.15) μm in MC-based emulsion gel to (22.68 ± 4.31) μm of MC-P emulsion gel at 6:4 and (27.04 ± 8.07) μm for the MC-CO gel at 9:1. The hydration capacity of MC-based emulsion gel was improved with P/CO addition, as well as thermal stabilities. Furthermore, CO addition exerted a more pronounced enhancement on the pH stability of emulsion gels than P, particularly under acidic conditions. The incorporation of P or CO increased the viscosity and viscoelasticity of the MC-based emulsion gels. Meanwhile, the hydrogen bonds were the main interactions maintain the strength of MC-P based emulsion gels, while electrostatic interactions in MC-CO gels. The findings of this study not only provide a reference for the preparation and application of emulsion gels stabilized by MC-P/CO, but also offer new insights into the mechanisms by which intermolecular interactions regulate the stability and rheological properties of MC-based emulsion gels.

  • Open Access

    Broiler Ascites Syndrome as a Potential Spontaneous Animal Model for Human Pulmonary Arterial Hypertension: A Narrative Review

    by Jie Zhang, Feihu Guan, Ye Tian, Yafen Song, Min Zhang, Xiaoyue Yang, Bing Zhang, Sifan Guo, Peng Ji, Chenghuai Yang, et al.

    Pulmonary arterial hypertension (PAH), a major subtype of pulmonary hypertension (PH), is a significant human pulmonary disease whose pathogenic mechanisms remain incompletely understood. Conventional animal models for PAH induction often fail to fully replicate the entire disease progression, making it difficult to trace the initial causes, key pathogenic events, and early disease mechanisms. We propose an evidence-based hypothesis that Broiler Ascites Syndrome (BAS) exhibits high similarity to human pulmonary arterial hypertension in terms of pathogenic triggers and molecular pathology, suggesting its potential as a spontaneous animal model for PAH research. This review systematically summarizes the pathogenic mechanisms and disease-inducing factors of BAS, analyzing its pathobiological commonalities with PAH. We demonstrate shared features in pulmonary vascular remodeling mechanisms, including cellular dysfunction, tissue fibrosis, and immune dysregulation. Furthermore, consistent reactive mechanisms are observed across different types of PAH-related studies and corresponding poultry research. This collective evidence supports the feasibility of utilizing BAS as a spontaneous animal model for PAH investigation. By comparing the pathogenic mechanisms of BAS and PAH, this work provides novel insights for developing animal models in PAH research. If validated, this model could address limitations of existing models regarding hypoxia tolerance, and right heart remodeling.

  • Open Access

    Effects of an Astragalus membranaceus Stem and Leaf-Angelica sinensis Stem and Leaf Mixture on Serum Parameters, Gut Microbiota, and Metabolomic Profiles in Simmental Weaned Bull Calves

    by Hongya Li, Nianshou Zhao, Min Yang, Yongli Hua, Yanming Wei, Peng Ji

    This study evaluated the effects of an Astragalus membranaceus stem and leaf–Angelica sinensis stem and leaf mixture (AASL) as a medicinal feed supplement on immune function, antioxidant status, inflammatory responses, gut microbiota and the serum metabolome in weaned Simmental bull calves. Calves were fed diets containing different levels of AASL, and serum immunoglobulins, inflammatory cytokines, and antioxidant indices were determined. In addition, fecal short-chain fatty acid (SCFA) concentrations, gut microbiota composition, and serum metabolic profiles were analyzed, followed by correlation analyses among the microbiota, SCFAs and metabolites. The results showed that AASL was rich in crude protein, crude fat and trace elements. 4% AASL supplementation increased serum immunoglobulin (IgG and IgM) levels, decreased tumor necrosis factor-alpha (TNF-α), interleukin-6 (IL-6) and interleukin-1 beta (IL-1β) levels, and enhanced superoxide dismutase (SOD), glutathione (GSH) and total antioxidant capacity (T-AOC) activities (p < 0.01 or p < 0.001), indicating improved immune and antioxidant status and attenuated inflammatory responses. AASL also enriched beneficial bacterial genera, suppressed potentially harmful taxa, and increased SCFA concentrations. Differential metabolites were mainly enriched in tryptophan metabolism, lipid metabolism, neuroactive ligand-receptor interaction, sphingolipid signaling, and ATP-binding cassette (ABC) transporter pathways. Integrated microbiota metabolite analysis further suggested that AASL improved host metabolic status through the coordinated regulation of gut microbiota, SCFAs production and related metabolic pathways. Overall, AASL shows promise as a functional feed supplement for improving calf health.

  • Characteristics of Radish Seed Protein and Its In Vitro Digested Products After Ultrasound‐Heat Co‐Treatment

    by Wei Ji, Min Yang, Lang Li, Deqian Ke

    Radish seed, a traditional Chinese herbal medicine rich in oil, generates a significant byproduct called radish seed meal after oil extraction, which contains high levels of protein. To develop novel plant‐based proteins, this study investigated the effects of heat treatment (37–95°C, 30 min) with or without ultrasonication (20 kHz, 40% amplitude, 10 min) on the characteristics of radish seed protein (RSP) extracted from radish seed meal. Results showed that RSP particle size decreased after heating at 37–65°C (with or without sonication) but increased at 75–95°C. The combination of heat treatment and ultrasonication yielded the highest RSP solubility (93.35% ± 0.33%). Heating at 65°C improved RSP emulsifying capacity (from 10.90 ± 0.28 to 20.15 ± 0.12 m 2 /g), which was further enhanced by sonication (22.33 ± 0.10 m 2 /g). Similarly, emulsion stability, foaming capacity, and digestibility were significantly improved by sonication combined with 65°C heating. Notably, the antioxidant activity of digested RSP was boosted by sonication and 65°C heating, with peak ABTS radical scavenging and lipid peroxidation inhibition observed at 8 h of digestion, while other activities (reducing power, Fe 2+ ‐chelation, and DPPH/·OH scavenging) peaked at 10 h. Additionally, 8‐h‐digested RSP treated with sonication and 65°C heating exhibited the highest α‐amylase (61.70% ± 1.10% at 1 mg/mL) and α‐glucosidase (55.35% ± 0.53% at 1 mg/mL) inhibitory activities. These findings demonstrate that ultrasonication combined with mild heating effectively enhances RSP functionality and bioactivity, providing a foundation for its application as a source of bioactive peptides in functional foods. Practical Applications: Ultrasonication combined with mild heating could be used to enhance RSP's functionality. The digested RSP under simulated intestinal condition at 8 h may serve as a source of bioactive peptides to help control blood glucose levels.