Federico Pirzio
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Federico Pirzio has a total of 314 co-authors. Here are the top co-authors by number of shared publications:
Antonio Agnesi
Università di Pavia
41 shared publicationsGiancarlo Reali
33 shared publications- Antonio Agnesi
Universita degli Studi di Pavia, Pavia, 27100, ITALY
29 shared publications - Valentin Petrov
Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy
24 shared publications A. Agnesi
University of Pavia, Dipartimento di Ingegneria Industriale e dell Informazione, Pavia, Italy
23 shared publicationsG. Reali
16 shared publications
Latest Publications
- Open Access
- 27 January 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 197
Few-cycle THz pulse generation in DSTMS driven by an 8.3-MHz amplified Mamyshev oscillator
- 27 January 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 197
Open AccessFew-cycle THz pulse generation in DSTMS driven by an 8.3-MHz amplified Mamyshev oscillator
- Open Access
- 4 July 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 192
Efficient energy extraction and improved pulse quality of a Mamyshev ultrafast fiber laser with a Fabry-Perot output coupler
- 4 July 2025
- Published by Elsevier in Optics & Laser Technology
- Vol. 192
Open AccessEfficient energy extraction and improved pulse quality of a Mamyshev ultrafast fiber laser with a Fabry-Perot output coupler
- Open Access
- 27 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (3) , 3759-3767
Generation of CW mid-infrared radiation in the mW power range and tuneable over 400 nm
Miniaturization of mid-infrared (MIR) spectroscopy sources has progressed significantly during the past two decades, but a solution able to provide full integration, high optical power and wide tuneability in the so-called atmospheric window (2.5 - 5 µm) is still missing. In this context, we investigated a broadband frequency-tuneable source relying on difference frequency generation (DFG) in a periodically poled lithium niobate (PPLN) ridge waveguide. By employing tuneable lasers for the pump and signal wavelengths emitting at around 1 µm and 1.55 µm, respectively, we were able to fully cover the ≈ 3 - 3.5 µm spectrum, thus translating the technological maturity of data communication photonic sources to the MIR wavelength band. Moreover, the use of a relatively large cross-section for the here-proposed PPLN ridge waveguide compared to commonly employed thin-film lithium niobate (TFLN) waveguides has allowed us to achieve low propagation and coupling losses together with high damage threshold, thereby allowing us to reach mW-level power in the MIR wavelength band.
- 27 January 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (3) , 3759-3767
Open AccessGeneration of CW mid-infrared radiation in the mW power range and tuneable over 400 nm
Miniaturization of mid-infrared (MIR) spectroscopy sources has progressed significantly during the past two decades, but a solution able to provide full integration, high optical power and wide tuneability in the so-called atmospheric window (2.5 - 5 µm) is still missing. In this context, we investigated a broadband frequency-tuneable source relying on difference frequency generation (DFG) in a periodically poled lithium niobate (PPLN) ridge waveguide. By employing tuneable lasers for the pump and signal wavelengths emitting at around 1 µm and 1.55 µm, respectively, we were able to fully cover the ≈ 3 - 3.5 µm spectrum, thus translating the technological maturity of data communication photonic sources to the MIR wavelength band. Moreover, the use of a relatively large cross-section for the here-proposed PPLN ridge waveguide compared to commonly employed thin-film lithium niobate (TFLN) waveguides has allowed us to achieve low propagation and coupling losses together with high damage threshold, thereby allowing us to reach mW-level power in the MIR wavelength band.
- 15 November 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (24) , 43635-43642
Femtosecond Mamyshev fiber oscillator started by ultra-low power microchip laser seeder at two different wavelengths: a comparison
A 1-W average output power, sub-60-fs femtosecond Mamyshev fiber oscillator was reliably started by a passively Q-switched sub-ns microchip laser generating four-wave-mixing signals in a polarization-maintaining passive fiber, at either 1064 nm or at 1033 nm. We show experimentally that seeding at 1033 nm provides much higher quality pulses with a duration as short as 41 fs and minimal satellites. The evolution toward the gain-managed nonlinear amplification regime clearly takes place when seeding the oscillator closer to the peak gain of the Yb-doped fiber.
- 15 November 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (24) , 43635-43642
Femtosecond Mamyshev fiber oscillator started by ultra-low power microchip laser seeder at two different wavelengths: a comparison
A 1-W average output power, sub-60-fs femtosecond Mamyshev fiber oscillator was reliably started by a passively Q-switched sub-ns microchip laser generating four-wave-mixing signals in a polarization-maintaining passive fiber, at either 1064 nm or at 1033 nm. We show experimentally that seeding at 1033 nm provides much higher quality pulses with a duration as short as 41 fs and minimal satellites. The evolution toward the gain-managed nonlinear amplification regime clearly takes place when seeding the oscillator closer to the peak gain of the Yb-doped fiber.
- 8 October 2024
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 41 (12) , E45-E51
Performance studies on group-velocity-matched femtosecond optical parametric generation
We present a comparative study and detailed characterization of high-power femtosecond optical parametric generation (OPG) at 10 MHz repetition rate in the near and mid-infrared by exploiting near-zero group-velocity-mismatch (GVM) in the nonlinear crystals of PPLN and MgO:PPLN. Using a microchip-started amplified Mamyshev fiber oscillator delivering 198 fs pulses at 1064 nm as the pump source and deploying 19-mm-long PPLN and 42-mm-long MgO:PPLN as gain media, we study in detail the influence of crystal length and pump pulse duration on femtosecond group-velocity-matched interaction in the OPG process. The OPG source is tunable across 1445–1577 nm in the signal and 3318–4412 nm in the idler, and can provide average output powers of up to 439 mW in the signal at 1530 nm and 197 mW in the idler at 3550 nm, at slope efficiencies of ∼50% and ∼20%, respectively. Signal pulses as short as 275 fs are obtained using the shorter crystal, while longer signal pulses with similar output powers are generated with the longer crystal. Experimental results are supported by theoretical simulations, providing good agreement. The OPG source exhibits excellent power stability with high spatial quality of M2<1.5 in the signal and idler beams.
- 8 October 2024
- Published by Optica Publishing Group in Journal of the Optical Society of America B
- Vol. 41 (12) , E45-E51
Performance studies on group-velocity-matched femtosecond optical parametric generation
We present a comparative study and detailed characterization of high-power femtosecond optical parametric generation (OPG) at 10 MHz repetition rate in the near and mid-infrared by exploiting near-zero group-velocity-mismatch (GVM) in the nonlinear crystals of PPLN and MgO:PPLN. Using a microchip-started amplified Mamyshev fiber oscillator delivering 198 fs pulses at 1064 nm as the pump source and deploying 19-mm-long PPLN and 42-mm-long MgO:PPLN as gain media, we study in detail the influence of crystal length and pump pulse duration on femtosecond group-velocity-matched interaction in the OPG process. The OPG source is tunable across 1445–1577 nm in the signal and 3318–4412 nm in the idler, and can provide average output powers of up to 439 mW in the signal at 1530 nm and 197 mW in the idler at 3550 nm, at slope efficiencies of ∼50% and ∼20%, respectively. Signal pulses as short as 275 fs are obtained using the shorter crystal, while longer signal pulses with similar output powers are generated with the longer crystal. Experimental results are supported by theoretical simulations, providing good agreement. The OPG source exhibits excellent power stability with high spatial quality of M2<1.5 in the signal and idler beams.
- 10 November 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (22) , 6008-6011
Efficient femtosecond optical parametric generation in group-velocity-matched MgO:PPLN at 10 MHz
We report on efficient single-pass optical parametric generation (OPG) of broadband femtosecond pulses in the mid-infrared at 10 MHz by exploiting group-velocity-matched interaction in a 42-mm-long MgO:PPLN crystal. Using a microchip-started femtosecond amplified Mamyshev oscillator at 1064 nm as the pump, the OPG source can provide tunable femtosecond pulses across 1516–1566 nm in the signal and 3318–3568 nm in the idler, with slope efficiencies of ∼93% and ∼41%, respectively. For 650 mW of average input pump power, signal powers of up to 283 mW at 1524 nm are generated, with more than 200 mW over the entire tuning range. Idler average powers of up to 104 mW at 3450 nm, with more than 80 mW across the full range, are also obtained. For input pump pulses of ∼182 fs, the generated signal pulses have a duration of ∼460 fs at 1516 nm. The idler pulses have a typical bandwidth of ≥100 nm over the entire tuning range, and as wide as 181 nm at 3457 nm. The OPG source exhibits excellent passive power stability, better than 0.5% rms in the signal and 0.6% rms in the idler, over 1 h, both in Gaussian TEM00 spatial profile with M2 < 1.5.
- 10 November 2023
- Published by Optica Publishing Group in Optics Letters
- Vol. 48 (22) , 6008-6011
Efficient femtosecond optical parametric generation in group-velocity-matched MgO:PPLN at 10 MHz
We report on efficient single-pass optical parametric generation (OPG) of broadband femtosecond pulses in the mid-infrared at 10 MHz by exploiting group-velocity-matched interaction in a 42-mm-long MgO:PPLN crystal. Using a microchip-started femtosecond amplified Mamyshev oscillator at 1064 nm as the pump, the OPG source can provide tunable femtosecond pulses across 1516–1566 nm in the signal and 3318–3568 nm in the idler, with slope efficiencies of ∼93% and ∼41%, respectively. For 650 mW of average input pump power, signal powers of up to 283 mW at 1524 nm are generated, with more than 200 mW over the entire tuning range. Idler average powers of up to 104 mW at 3450 nm, with more than 80 mW across the full range, are also obtained. For input pump pulses of ∼182 fs, the generated signal pulses have a duration of ∼460 fs at 1516 nm. The idler pulses have a typical bandwidth of ≥100 nm over the entire tuning range, and as wide as 181 nm at 3457 nm. The OPG source exhibits excellent passive power stability, better than 0.5% rms in the signal and 0.6% rms in the idler, over 1 h, both in Gaussian TEM00 spatial profile with M2 < 1.5.
- Open Access
- 8 May 2023
- Published by Elsevier in Optics Communications
- Vol. 542
Compact all-solid-state femtosecond Yb amplifier using a high-brightness multi-watt tapered laser diode
- 8 May 2023
- Published by Elsevier in Optics Communications
- Vol. 542
Open AccessCompact all-solid-state femtosecond Yb amplifier using a high-brightness multi-watt tapered laser diode
- 29 March 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (8) , 12289-12298
Versatile OSCAT time-domain THz spectrometer
We report on a compact and versatile time-domain spectrometer operating in the THz spectral region from 0.2 to 2.5 THz based on ultrafast Yb:CALGO laser and photo-conductive antennas. The spectrometer operates with the optical sampling by cavity tuning (OSCAT) method based on laser repetition rate tuning, which allows at the same time the implementation of a delay-time modulation scheme. The whole characterization of the instrument is presented and compared to the classical THz time-domain spectroscopy implementation. THz spectroscopic measurements on a 520-mu m thick GaAs wafer substrate together with water vapor absorption measurements are also reported to further validate the instrument capabilities.
- 29 March 2023
- Published by Optica Publishing Group in Optics Express
- Vol. 31 (8) , 12289-12298
Versatile OSCAT time-domain THz spectrometer
We report on a compact and versatile time-domain spectrometer operating in the THz spectral region from 0.2 to 2.5 THz based on ultrafast Yb:CALGO laser and photo-conductive antennas. The spectrometer operates with the optical sampling by cavity tuning (OSCAT) method based on laser repetition rate tuning, which allows at the same time the implementation of a delay-time modulation scheme. The whole characterization of the instrument is presented and compared to the classical THz time-domain spectroscopy implementation. THz spectroscopic measurements on a 520-mu m thick GaAs wafer substrate together with water vapor absorption measurements are also reported to further validate the instrument capabilities.
- Open Access
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-7
Self-Mixing Displacement Measured by a Two-Color Laser in 66-nm Steps
We demonstrate a new self-mixing interferometer (SMI) simultaneously working on two wavelengths, the fundamental at 1064 nm and the second harmonic at 532 nm delivered in the same beam. The beam is sent to the remote target in the usual way, and in the return path two photodiodes detect the two self-mixing signals without crosstalk. As the source, we were able to use a diode-pumped Nd:YVO 4 with KTP two-color laser of a commercial pointer. With simple processing of the two self-mixing signals we are able to obtain the interferometric signals cos(2 ks ) and sin(2 ks ) at 532 nm, from which the unambiguous measurement of arbitrary target displacement follows with counts in units of λ/8 of the second harmonic wavelength or 66 nm.
- 8 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-7
Open AccessSelf-Mixing Displacement Measured by a Two-Color Laser in 66-nm Steps
We demonstrate a new self-mixing interferometer (SMI) simultaneously working on two wavelengths, the fundamental at 1064 nm and the second harmonic at 532 nm delivered in the same beam. The beam is sent to the remote target in the usual way, and in the return path two photodiodes detect the two self-mixing signals without crosstalk. As the source, we were able to use a diode-pumped Nd:YVO 4 with KTP two-color laser of a commercial pointer. With simple processing of the two self-mixing signals we are able to obtain the interferometric signals cos(2 ks ) and sin(2 ks ) at 532 nm, from which the unambiguous measurement of arbitrary target displacement follows with counts in units of λ/8 of the second harmonic wavelength or 66 nm.
- 7 April 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (8) , 1960-1963
Femtosecond Mamyshev fiber oscillator started by a passively Q-switched microchip laser
A femtosecond Mamyshev fiber oscillator in normal dispersion mode at 1 µm was started reliably and safely by an inexpensive diode-pumped passively Q-switched monolithic microchip laser emitting 300-ps pulses. Four-wave mixing spectral broadening is shown to play a pivotal role in starting the Mamyshev oscillator, owing to the random short and intense temporal fluctuations allowed by its ∼10-nm bandwidth. Systematic studies of the starting dynamics show that a success rate of 100% of the attempts is achieved with modest seed energy, as low as ∼30 nJ from the sub-nanosecond laser, corresponding to ∼100 pJ for the total four-wave mixing signal required to start the oscillation.
- 7 April 2022
- Published by Optica Publishing Group in Optics Letters
- Vol. 47 (8) , 1960-1963
Femtosecond Mamyshev fiber oscillator started by a passively Q-switched microchip laser
A femtosecond Mamyshev fiber oscillator in normal dispersion mode at 1 µm was started reliably and safely by an inexpensive diode-pumped passively Q-switched monolithic microchip laser emitting 300-ps pulses. Four-wave mixing spectral broadening is shown to play a pivotal role in starting the Mamyshev oscillator, owing to the random short and intense temporal fluctuations allowed by its ∼10-nm bandwidth. Systematic studies of the starting dynamics show that a success rate of 100% of the attempts is achieved with modest seed energy, as low as ∼30 nJ from the sub-nanosecond laser, corresponding to ∼100 pJ for the total four-wave mixing signal required to start the oscillation.