Satyajit Shukla
Research Subjects
Research Interests
Satyajit Shukla has a total of 122 co-authors. Here are the top co-authors by number of shared publications:
- Sudipta Seal
Advanced Materials Processing and Analysis Center, Nanoscience Technology Center, University of Central Florida, Orlando, FL 32826, USA
22 shared publications K. G. K. Warrier
11 shared publications- Baiju Kizhakkekilikoodayil Vijayan
Department of Chemistry/Nanoscience, Kannur University, Swami Ananda Theertha Campus, Payyannur, Kerala-670327, India
9 shared publications S. Seal
Surface Engineering and Nanotechnology Facility (SNF), Advanced Materials Processing and Analysis Center (AMPAC), Engineering 381, University of Central Florida (UCF), Orlando, Florida 32816
9 shared publicationsHyoung J. Cho
Advanced Materials Processing and Analysis Center (AMPAC), Mechanical Materials Aerospace Engineering (MMAE) Department Engineering # 381, 4000 Central Florida Blvd. University of Central Florida (UCF), Orlando, FL 32826, USA
8 shared publicationsLawrence Ludwig
Kennedy Space Center (KSC), National Aeronautics and Space Administration (NASA), FL 32899, USA
7 shared publications
Latest Publications
- 23 November 2023
- Published by Elsevier in Chemosphere
- Vol. 349, 140766
Integrated Fenton-like and ozonation based advanced oxidation processes for treatment of real-time textile effluent containing azo reactive dyes
- 23 November 2023
- Published by Elsevier in Chemosphere
- Vol. 349, 140766
Integrated Fenton-like and ozonation based advanced oxidation processes for treatment of real-time textile effluent containing azo reactive dyes
- 14 October 2023
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 234 (10) , 1-20
Regeneration and Recycling of Hydrogen Titanate Nanotubes as Methylene Blue Adsorbent via Ozonation-Based Advanced Oxidation Process
- 14 October 2023
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 234 (10) , 1-20
Regeneration and Recycling of Hydrogen Titanate Nanotubes as Methylene Blue Adsorbent via Ozonation-Based Advanced Oxidation Process
- 21 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (11) , 29258-29280
Removal of methylene blue and azo reactive dyes from aqueous solution and textile effluent via modified pulsed low-frequency ultrasound cavitation process
Organic dyes in the aqueous solutions and textile effluents cause severe environmental pollution due to their carcinogenic and mutagenic nature. Ultrasound (US) cavitation is one of the promising advanced oxidation processes (AOP) to remove the organic dyes from the aqueous solutions and textile effluents. Nevertheless, the conventional low-frequency US cavitation process exhibits very low efficiency in the dye removal process and demands effective modification to improve its performance. In this investigation, a conventional pulsed low-frequency (22 ± 2 kHz) US cavitation process has been modified by varying the US power (50–150 W), initial solution pH (2–10), and O2 flow rate (1–4 L min−1) to enhance the decomposition of cationic methylene blue (MB) dye in an aqueous solution. The operation of the classic Haber–Weiss reaction, both in the forward and backward directions, and the ozone effect have been observed, for the first time, under the modified US cavitation process, as confirmed via the radical trapping experiments. Moreover, the hydrothermally synthesized hydrogen titanate (H2Ti3O7) nanotubes (HTN) have been utilized as sonocatalyst, for the first time, for 100% dye removal, with effective regeneration obtained via an in-situ thermal activation of persulfate (PS, S2O82−). The most optimum values of US power, initial solution pH, O2 flow rate, HTN, and PS concentrations for 100% MB decomposition are observed to be 150 W, 2, 2 L min−1, 0.3 g L−1, and 10 mM, respectively. The decomposition of industrial azo reactive dyes in an aqueous solution as well as in a textile effluent has also been demonstrated using a modified pulsed low-frequency US cavitation process involving the thermal activation of PS without the use of HTN, which justifies its suitability for a commercial application.
- 21 November 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (11) , 29258-29280
Removal of methylene blue and azo reactive dyes from aqueous solution and textile effluent via modified pulsed low-frequency ultrasound cavitation process
Organic dyes in the aqueous solutions and textile effluents cause severe environmental pollution due to their carcinogenic and mutagenic nature. Ultrasound (US) cavitation is one of the promising advanced oxidation processes (AOP) to remove the organic dyes from the aqueous solutions and textile effluents. Nevertheless, the conventional low-frequency US cavitation process exhibits very low efficiency in the dye removal process and demands effective modification to improve its performance. In this investigation, a conventional pulsed low-frequency (22 ± 2 kHz) US cavitation process has been modified by varying the US power (50–150 W), initial solution pH (2–10), and O2 flow rate (1–4 L min−1) to enhance the decomposition of cationic methylene blue (MB) dye in an aqueous solution. The operation of the classic Haber–Weiss reaction, both in the forward and backward directions, and the ozone effect have been observed, for the first time, under the modified US cavitation process, as confirmed via the radical trapping experiments. Moreover, the hydrothermally synthesized hydrogen titanate (H2Ti3O7) nanotubes (HTN) have been utilized as sonocatalyst, for the first time, for 100% dye removal, with effective regeneration obtained via an in-situ thermal activation of persulfate (PS, S2O82−). The most optimum values of US power, initial solution pH, O2 flow rate, HTN, and PS concentrations for 100% MB decomposition are observed to be 150 W, 2, 2 L min−1, 0.3 g L−1, and 10 mM, respectively. The decomposition of industrial azo reactive dyes in an aqueous solution as well as in a textile effluent has also been demonstrated using a modified pulsed low-frequency US cavitation process involving the thermal activation of PS without the use of HTN, which justifies its suitability for a commercial application.
- 22 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (42) , 63304-63320
Autoclave and pulsed ultrasound cavitation based thermal activation of persulfate for regeneration of hydrogen titanate nanotubes as recyclable dye adsorbent
In the dye removal application, regeneration of hydrogen titanate nanotubes (HTN, H2Ti3O7) has been achieved via thermal activation of persulfate anion (PS, S2O82−) by using the conventional hot plate technique which has limitations from the commercial perspective since it does not provide any precise control over the thermal generation process typically during the scale-up operation. To overcome this drawback, HTN have been synthesized via hydrothermal process which exhibit the methylene blue (MB) adsorption of 93% at the initial dye concentration and solution pH of 90 µM and 10 respectively. HTN have been regenerated via the thermal activation of PS by varying its initial concentration and regeneration temperature, within the range of 0.27–1 wt% and 40–80 °C, under the thermal conditions set by the autoclave and pulsed ultrasound (US) cavitation process. The results of recycling experiments suggest that the optimum values of initial PS concentration and temperature, for the regeneration of HTN under the autoclave conditions, are 1 wt% and 70 °C with the maximum MB adsorption of 92%, while, the corresponding values for the pulsed US cavitation process are 1 wt%, 80 °C, and 91% respectively. Thus, the regeneration and recycling of HTN have been successfully demonstrated by using the autoclave and pulsed US cavitation process. Under the optimum conditions, MB degradation involves the generation and attack of SO4•− for both the thermal generation techniques. The regeneration techniques developed here may be utilized in future during the scale-up operation and also for the regeneration of adsorbents besides HTN.
- 22 April 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (42) , 63304-63320
Autoclave and pulsed ultrasound cavitation based thermal activation of persulfate for regeneration of hydrogen titanate nanotubes as recyclable dye adsorbent
In the dye removal application, regeneration of hydrogen titanate nanotubes (HTN, H2Ti3O7) has been achieved via thermal activation of persulfate anion (PS, S2O82−) by using the conventional hot plate technique which has limitations from the commercial perspective since it does not provide any precise control over the thermal generation process typically during the scale-up operation. To overcome this drawback, HTN have been synthesized via hydrothermal process which exhibit the methylene blue (MB) adsorption of 93% at the initial dye concentration and solution pH of 90 µM and 10 respectively. HTN have been regenerated via the thermal activation of PS by varying its initial concentration and regeneration temperature, within the range of 0.27–1 wt% and 40–80 °C, under the thermal conditions set by the autoclave and pulsed ultrasound (US) cavitation process. The results of recycling experiments suggest that the optimum values of initial PS concentration and temperature, for the regeneration of HTN under the autoclave conditions, are 1 wt% and 70 °C with the maximum MB adsorption of 92%, while, the corresponding values for the pulsed US cavitation process are 1 wt%, 80 °C, and 91% respectively. Thus, the regeneration and recycling of HTN have been successfully demonstrated by using the autoclave and pulsed US cavitation process. Under the optimum conditions, MB degradation involves the generation and attack of SO4•− for both the thermal generation techniques. The regeneration techniques developed here may be utilized in future during the scale-up operation and also for the regeneration of adsorbents besides HTN.
- 14 February 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 25 (21) , 20304-20319
Hydrothermal synthesized magnetically separable mesostructured H2Ti3O7/γ-Fe2O3 nanocomposite for organic dye removal via adsorption and its regeneration/reuse through synergistic non-radiation driven H2O2 activation
Hydrogen titanate (H2Ti3O7) nanotubes/nanosheets (HTN) are emerging class of adsorbent material which possess unique property of activating hydrogen peroxide (H2O2) to generate the reactive oxygen species (ROS), such as superoxide radical ions (O2 .−) and hydroxyl radicals (·OH), effective in the decomposition of surface-adsorbed dye. However, HTN are non-magnetic which create hurdle in their effective separation from the treated aqueous solution. To overcome this issue, magnetic nanocomposites (HTNF) composed of HTN and maghemite (γ-Fe2O3) nanoparticles have been processed by subjecting the core–shell magnetic photocatalyst consisting of γ-Fe2O3/silica (SiO2)/titania (TiO2), having varying amounts of TiO2 in the shell to the hydrothermal conditions. HTNF-5 magnetic nanocomposite consisting of 31 wt% H2Ti3O7, typically having nanotube morphology with the highest specific surface area (133 m2 g−1) and pore-volume (0.22 cm3 g−1), exhibits the highest capacity (74 mg g−1) for the adsorption of cationic methylene blue (MB) dye from an aqueous solution involving the electrostatic attraction mechanism and pseudo-second-order kinetics. Very fast magnetic separation followed by regeneration of HTNF-5 magnetic nanocomposite has been demonstrated via non-radiation driven H2O2 activation. It has been ascertained for the first time that the underlying mechanism of dye decomposition involves the synergy effect between the constituents of HTNF magnetic nanocomposite.
- 14 February 2017
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 25 (21) , 20304-20319
Hydrothermal synthesized magnetically separable mesostructured H2Ti3O7/γ-Fe2O3 nanocomposite for organic dye removal via adsorption and its regeneration/reuse through synergistic non-radiation driven H2O2 activation
Hydrogen titanate (H2Ti3O7) nanotubes/nanosheets (HTN) are emerging class of adsorbent material which possess unique property of activating hydrogen peroxide (H2O2) to generate the reactive oxygen species (ROS), such as superoxide radical ions (O2 .−) and hydroxyl radicals (·OH), effective in the decomposition of surface-adsorbed dye. However, HTN are non-magnetic which create hurdle in their effective separation from the treated aqueous solution. To overcome this issue, magnetic nanocomposites (HTNF) composed of HTN and maghemite (γ-Fe2O3) nanoparticles have been processed by subjecting the core–shell magnetic photocatalyst consisting of γ-Fe2O3/silica (SiO2)/titania (TiO2), having varying amounts of TiO2 in the shell to the hydrothermal conditions. HTNF-5 magnetic nanocomposite consisting of 31 wt% H2Ti3O7, typically having nanotube morphology with the highest specific surface area (133 m2 g−1) and pore-volume (0.22 cm3 g−1), exhibits the highest capacity (74 mg g−1) for the adsorption of cationic methylene blue (MB) dye from an aqueous solution involving the electrostatic attraction mechanism and pseudo-second-order kinetics. Very fast magnetic separation followed by regeneration of HTNF-5 magnetic nanocomposite has been demonstrated via non-radiation driven H2O2 activation. It has been ascertained for the first time that the underlying mechanism of dye decomposition involves the synergy effect between the constituents of HTNF magnetic nanocomposite.
- 16 August 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (83) , 80133-80144
Ion-exchange bonded H2Ti3O7 nanosheets-based magnetic nanocomposite for dye removal via adsorption and its regeneration via synergistic activation of persulfate
Magnetic nanocomposite consisting of H2Ti3O7 nanosheets and γ-Fe2O3 nanoparticles has been synthesized via ion-exchange bond formation and utilized for dye-removal application involving its regeneration through synergistic persulfate activation.
- 16 August 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (83) , 80133-80144
Ion-exchange bonded H2Ti3O7 nanosheets-based magnetic nanocomposite for dye removal via adsorption and its regeneration via synergistic activation of persulfate
Magnetic nanocomposite consisting of H2Ti3O7 nanosheets and γ-Fe2O3 nanoparticles has been synthesized via ion-exchange bond formation and utilized for dye-removal application involving its regeneration through synergistic persulfate activation.