AKAlireza Karimi

Alireza Karimi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Alireza Karimi has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Frequency Response Data-Driven Disturbance Observer Design for Flexible Joint Robots

    by Deokjin Lee, Junho Song, Alireza Karimi, Sehoon Oh

    Motion control of flexible joint robots (FJR) is challenged by inherent flexibility and configuration-dependent variations in system dynamics. While disturbance observers (DOB) can enhance system robustness, their performance is often limited by the elasticity of the joints and the variations in system parameters, which leads to a conservative design of the DOB. This article presents a novel frequency response function (FRF)-based optimization method aimed at improving DOB performance, even in the presence of flexibility and system variability. The proposed method maximizes control bandwidth and effectively suppresses vibrations, thus enhancing overall system performance. Closed-loop stability is rigorously proven using the Nyquist stability criterion. Experimental validation on a FJR demonstrates that the proposed approach significantly improves robustness and motion performance, even under conditions of joint flexibility and system variation.

  • Open Access

    Compensating nonlinearities in high-speed atomic force microscopy using data-driven feedforward controller design

    by Navid Asmari, Veronika Cencen, Mustafa Kangül, Santiago Harald Andany, Cem Tekin, Maartje Martina Cornelia Bastings, Alireza Karimi, Georg Ernest Fantner

    Piezoelectric actuators are widely used in nano-positioning stage of atomic force microscopes (AFM). The nonlinear dynamics of these actuators adversely affect the AFM image quality unless they are compensated with a controller. We propose a feedforward controller design method which adjusts the scan waveforms with the aim of minimizing the hysteresis distortions in the lateral direction of motion. The data-driven design approach requires a pair of forward and backward stripes of images of the sample to detect the hysteresis mappings through solving a nonlinear optimization problem with a genetic algorithm. The parameters of the optimization are then used to shape the scan waveforms to compensate for the effects of hysteresis. The quick and straightforward design makes the proposed feedforward controller a good solution for lateral scanners in high-speed AFM where implementation of feedback control is often hindered by the physical constraints and latency of the system. We show that the design procedure can be successfully applied on AFM instruments regardless of the imaging mode, scan speed, or the sample under study.


  • Open Access

    Frequency Response Data-Driven Disturbance Observer Design for Flexible Joint Robots

    by Deokjin Lee, Junho Song, Alireza Karimi, Sehoon Oh

    Motion control of flexible joint robots (FJR) is challenged by inherent flexibility and configuration-dependent variations in system dynamics. While disturbance observers (DOB) can enhance system robustness, their performance is often limited by the elasticity of the joints and the variations in system parameters, which leads to a conservative design of the DOB. This paper presents a novel frequency response function (FRF)-based optimization method aimed at improving DOB performance, even in the presence of flexibility and system variability. The proposed method maximizes control bandwidth and effectively suppresses vibrations, thus enhancing overall system performance. Closed-loop stability is rigorously proven using the Nyquist stability criterion. Experimental validation on a FJR demonstrates that the proposed approach significantly improves robustness and motion performance, even under conditions of joint flexibility and system variation.

  • Data-Driven LPV Control for Harmonic Disturbance Rejection in a Hybrid Isolation Platform

    by Elias Klauser, Alireza Karimi

    A novel approach for linear parameter-varying (LPV) controller synthesis for adaptive rejection of frequency-varying sinusoidal disturbances is proposed. Only the frequency response data of a linear time-invariant (LTI) multiple-input-multiple-output (MIMO) system are used to design the LPV controller that stabilizes the system for arbitrarily fast variation of the disturbance frequencies. Global stability is achieved thanks to the specific structure of the LPV controller and the use of integral quadratic constraints (IQCs) to represent the frequency variations. The LPV controller is designed by convex optimization in the frequency domain. A hybrid microvibration damping platform (MIVIDA) for space applications is considered for experimental validation of the proposed method. An LPV controller for rejection of unknown frequency-varying sinusoidal disturbances is designed and implemented on the real system. Experimental results demonstrate the effectiveness of the proposed approach in asymptotically rejecting disturbances and ensuring closed-loop stability against arbitrarily fast variations in disturbance frequencies.


  • Transient Stability Analysis of Power-Synchronized PLL-Less Grid-Following Inverters

    by Milad Zarif Mansour, Nabil Mohammed, Mohammad Hasan Ravanji, Alireza Karimi, Behrooz Bahrani

    In the realm of modern power systems, grid-connected inverters are essential for integrating renewable energy resources. While grid-following inverters (GFLIs) currently dominate the market, grid-forming inverters (GFMIs) are pivotal for technology future power systems. Furthermore, recent research emphasizes the advantages of power-synchronized GFLIs (PSGFLIs), which combine the reliable operation of conventional GFLIs in strong grids with the stability of GFMIs in weak grids. This paper presents a comprehensive analysis of transient angle stability for a specific variant of PSGFLI, referred to as the linear parameter-varying control PSGFLI (LPV-PSGFLI). First, a nonlinear dynamic model suitable for transient stability analysis is derived. Then, the necessary and sufficient stability condition is obtained using Lyapunov's linearization stability analysis method. A method for estimating the required system variables for stability assessment is proposed, along with the static stability condition to identify the presence of an equilibrium point. Additionally, a Lyapunov energy function is proposed to determine the domain of attraction for the system's equilibrium point. The accuracy of the stability condition and the calculated domain of attraction is evaluated across multiple scenarios via simulations in MATLAB/Simulink and experimental tests performed on a scaled-down inverter experimentation platform.


  • Achieving Optimal Performance With Data-Driven Frequency-Based Control Synthesis Methods

    by Philippe Schuchert, Alireza Karimi

    Frequency Response Function (FRF)-based control synthesis methods for Linear Time-Invariant (LTI) systems have been widely used in control theory and industry. Recently, there has been renewed interest in these methods, employing numerical optimization tools to enhance their performance. In this paper, we analyze the convergence properties of two data-driven frequency-based H and H∞ synthesis methods [1], [2] as the controller order increases. We demonstrate that, in the limit, an optimal controller can be designed using only the FRF, providing an estimate of the best achievable performance or enabling the design of an optimal high-order controller.


  • Data-Driven Robust Passivity-Based Controller Design for Grid-Connected Converters

    by Seyed Sohail Madani, Alireza Karimi

    Due to the integration of renewable-based distributed generation units (DGUs), energy storage systems (ESSs), and electric car charging stations, more and more power electronic converters are connected to the grid. In grids with a high penetration rate of these converters, high-current oscillation may happen, which can damage the grid equipment or cause a blackout. Passivity theory is used to design converter controllers in order to alleviate this problem in a decentralized fashion. However, the proposed methods are mostly model-based and are sensitive to parametric uncertainty. This article presents a robust data-driven frequency-domain grid-connected converter controller design with the possibility of defining robust passivity conditions on a performance channel. In addition to robust passivity, the controller design guarantees tracking and disturbance rejection performance. All performance and passivity conditions are written as constraints on closed-loop sensitivity functions and then changed to frequency-domain inequalities and convexified around an initial stabilizing controller. The controller design problem is converted to a convex optimization problem that can be solved efficiently using available solvers. The proposed method is validated by a power-hardware-in-the-loop (PHIL) experiment, including a switching inverter, real-time simulator, and $LCL$ filter.


  • Frequency-Domain Data-Driven Position-Dependent Controller Synthesis for Cartesian Robots

    by Philippe Schuchert, Alireza Karimi

    Cartesian robots have position-dependent dynamics that must be taken into account for high-performance applications. Traditional methods design linear time-invariant (LTI) controllers that are robustly stable with respect to position variations but result in reduced performance. Advanced methods require linear parameter varying (LPV) models and LPV controller design methods that are not well-established in the industry. On the other hand, the classical model-based gain-scheduled technique involves parametric identification, high-performance controller design for each position, interpolation of the controller parameters, and real-time controller validation, making it time-consuming and costly. Our approach uses frequency response at different operating points to design an LPV controller using a convex optimization algorithm based on second-order cone programming. The approach is applied to an industrial three-axis Cartesian robot, showing significant improvements over state-of-the-art control design strategies. Data acquisition and controller design can be performed automatically, reducing significantly the engineering costs for controller synthesis.