JLJung Ah Lim

Jung Ah Lim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jung Ah Lim has a total of 303 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sequential-Photocuring-Assisted Transformation of Planar Multilayer Structures into Curved Geometries

    by Daihyun Hwang, Jeonghyo Lee, Yeonseo Lee, Yougyoung Lee, Sungjun Han, Hosun Lim, Jung Ah Lim, Heesuk Kim, Wonbin Hong, Min Sang Kwon

    The integration of functional electronic structures into curved geometries remains challenging, as conventional approaches rely on post-shaping or adhesive-assisted assembly that separate structure formation from shape definition. Here, we present a sequential-photocuring-assisted fabrication strategy that transforms planar multilayer structures into curved forms within a single material system. A wavelength-selective acrylate–epoxy resin is designed to create a deformable intermediate state under visible light, followed by a fixation-enabled final state through UV-triggered curing. A gradient-like curing strategy, involving time-dependent evolution of conversion during sequential irradiation, allows controlled partial epoxy conversion and provides both processability and subsequent reactivity. The second curing step induces simultaneous interfacial bonding and structural stiffening, enabling adhesive-free integration and fixation of the mold-imposed geometry. A multilayer patch antenna operating at 28 GHz is fabricated and transformed from planar to curved geometry while maintaining its performance. This approach provides a material-based framework for integrating planar-fabricated structures into three-dimensional form factors without thermoforming or adhesives.

  • Open Access

    Near-Infrared Plasmonic Nanogap Organic Photodetectors for On-Chip Photonic Integration

    by Danbi Kim, Hanna Lee, Changsoon Choi, Jung Pyo Hong, Do Kyung Hwang, Wassie M. Takele, Terefe G. Habteyes, Jeong Ho Cho, In−Ho Lee, Jae-Hoon Han, et al.

    Near-infrared (NIR) photonic integrated circuits (PICs) are emerging as key platforms for on-chip optical communication and sensing, driven by their compatibility with silicon photonics and low-loss operation in telecom wavelength bands. However, conventional photodetectors based on Si, Ge, and III–V semiconductors require high-temperature processing and are difficult to integrate with polymeric or low-index photonic systems. Organic photodetectors (OPDs) offer a promising alternative, enabling efficient NIR light–matter interaction and photodetection while remaining compatible with low-temperature, solution-processed fabrication. Here, we demonstrate a plasmonic nanogap OPD architecture that enables efficient photodetection within an extremely confined nanoscale channel and direct integration with few-micron-width waveguides. Au/Al nanogap electrodes generate strongly localized plasmonic fields and facilitate efficient carrier extraction. With a photomultiplication-type bulk heterojunction, the device achieves high responsivity and quantum efficiency, along with ultralow dark current and a fast temporal response. The waveguide-integrated device detects guided optical signals at multimode interference outputs with consistent modulation response.

  • Open Access

    Wireless, skin-attachable patch with 3D liquid metal electrodes for vagus nerve stimulation in depression

    by Wonjung Park, Enji Kim, Doo-Ho Kang, Sumin Kim, Yeon-Mi Hong, Dayeon Kim, Jakyoung Lee, Hayoung Song, Hyun Ho Jung, Dahl-Young Khang, et al.

    Current nonsurgical vagus nerve stimulation (VNS) approaches often suffer from broad current spread, high electrode-skin impedance, and unintended stimulation of surrounding tissues, which can reduce efficacy and cause side effects. Here, we present a wirelessly operable, skin-attachable VNS patch with three-dimensional liquid-metal electrodes that mimic the low modulus of biological tissues, developed as a minimally invasive platform for investigating the biological mechanisms underlying VNS in a mouse model of depression. The soft, low-modulus three-dimensional liquid metal electrodes gently penetrate the skin, bypass the stratum corneum, and improve electrode–tissue coupling while minimizing tissue damage compared with conventional planar or rigid electrodes. To comprehensively assess therapeutic effects, we conducted behavioral tests, neural probe-based brain signal analysis, dendritic spine density measurements, and blood and inguinal lymph node profiling in depression model mice. VNS increased plasma serotonin levels and increased dendritic spine density, indicating improved neuroplasticity. Corticosterone-induced depressive mice exhibited elevated CD4+ and B220+ cells, which normalized with VNS. These results establish an animal-level proof-of-concept that minimally invasive VNS can engage key neural and immunological pathways relevant to depression, providing a foundation for future neuromodulation strategies.

  • Open Access

    Emerging diverse 3D neural electrode architectures for bioelectronics

    by Joonho Paek, Wonjung Park, Hayoung Song, Inhea Jeong, Myoungjae Oh, Eunmin Kim, Dayeon Kim, Seung Hyun An, Younghoo Kim, Won Gi Chung, et al.

    This review highlights recent advances in 3D neural electrodes, focusing on engineering methodologies that address the limitations of conventional neural interfaces by improving stability and enabling access to deeper biological regions.


  • Top Cited Papers

    Broadband Circularly Polarized Light Detection via Spin‐Selective Charge Transport in Quantum Dot Photodiodes

    by Minseo Kim, Shi Li, Kyunghoon Lee, Eonhyoung Ahn, Soyeon Lee, Kiwook Kim, Hang Kim, Wookyung Yu, Changsoon Choi, Jung Ah Lim, et al.

    Circularly polarized light (CPL) detection provides polarization‐resolved information, enabling advanced applications in quantum technologies, bioimaging, secure communications, and multi‐level optical data processing. However, conventional CPL photodetectors typically rely on intrinsically chiral absorbers, restricting operation to the UV–vis range and hindering extension into the near‐infrared (NIR) and shortwave infrared (SWIR), which are critical for deep tissue imaging and low‐visibility sensing. Here, we demonstrate broadband CPL detection with quantum dot (QD) photodiodes that exploit the chiral‐induced spin selectivity effect in chiral‐ZnO charge transport layers. Chiral ligand‐functionalized ZnO electron transport layers selectively transmit spin‐polarized charge carriers from QDs, enabling CPL‐specific photocurrent generation even in spectral regions without intrinsic chiral absorption. Heavy‐metal‐free Cu–In–Se QD‐photodiodes exhibit outstanding specific detectivity ( D * ) of 1.28 × 10 12 Jones without external bias and broadband CPL detection ( g Iph : ∼0.17 at 260 nm and ∼0.13 at 780 nm), while PbS QD‐devices extend CPL detection across 250–1700 nm (UV–Vis–NIR–SWIR) with superior performance ( D * : 1.45 × 10 12 Jones). The chiral‐transport‐driven strategy offers fundamental insights into CPL photodetection and establishes a scalable and optically passive platform for broadband polarization‐resolved optoelectronics.


  • Enhancing Structural Stability of Bio-inspired Alumina Coatings on CFRP for Improved Stab Resistance Using Lacquer and Adhesive

    by Han Bi Lee, Jei Gyeong Jeon, Hanna Lee, Jung Ah Lim, Minwook Lee

    Recently, there have been various threats using sharp tools such as knives, and anti-stab clothing and shields have been used to counter these threats. This study created a stab-resistant panel using a carbon fiber-reinforced plastic (CFRP) composite with lightweight and high-strength properties. Specifically, the panel was coated with a high-hardness layer using lacquer and plate-shaped alumina (Al2O3) particles for a bioinspired structure of abalone shells. The hardness allows for fewer layers of carbon fabric to reduce the weight of the panel. The coating layer was successfully bonded to the CFRP panels with epoxy to maintain a stable structure during the penetration of sharp tools. The stab-proof performance was evaluated using the National Institute of Justice standards' single-edged knife blade (P1). The P1 blade penetrated the panel 13.46 mm, but the high-hardness layer significantly reduced the penetration depth by 70.2% to 4.01 mm.


  • Chirality transfer from molecularly dispersed versus supramolecularly assembled chiral inducers to achiral conjugated polymer semiconductors

    by Hanna Lee, Hyun Min Kwon, Jun Ho Hwang, Ji Hyeon Lee, Minkyun Son, Junyeon Yoon, Eunji Lee, Sae Byeok Jo, Jung Ah Lim

    The aggregation state of a chiral inducer is critical for chirality transfer to an achiral conjugated polymer: intimate inducer–polymer contact appears key to efficient transfer, offering a processing-based design rule for chiroptical semiconductors.

  • Open Access

    Pixelation‐Free, Monolithic Iontronic Pressure Sensors Enabling Large‐Area Simultaneous Pressure and Position Recognition via Machine Learning

    by Juhui Kim, Junseo Lee, Kwang‐Hun Choi, Seongil Im, Jae Hong Kim, Changsoon Choi, Junghwan Byun, Changhwan Shin, Ho Won Jang, Hyunsu Ju, et al.

    Despite significant advances, flexible pressure sensors still face critical limitations, including pixelated architecture and extensive wiring, which hinder their scalability for large‐area applications. Here, we present a pixelation‐free, monolithic iontronic pressure sensor that simultaneously detects pressure and position over a large area with high sensitivity (4.16 kPa −1 ), a wide detection range (3300 s) without significant degradation, thereby overcoming key limitations of conventional piezoionic pressure sensors. Machine learning algorithms effectively decouple overlapping pressure–position signals from the multichannel outputs, achieving high accuracy in pressure prediction across different spatial positions. Real‐time demonstrations, including handwriting recognition with pressure‐dependent color variation and simultaneous multi‐point detection producing piano sounds of varying tones, highlight the versatility of the device for next‐generation large‐area and flexible human–machine interfaces.


  • Open Access

    Role of Amorphous Phases in Mixed Conduction of Conjugated Regioblock Copolymers for Organic Electrochemical Synaptic Transistors

    by Kwang‐Hun Choi, Seongil Im, Aaron Plant, Carlos Neri Soto, Hanna Lee, Changsoon Choi, Ho Won Jang, Jeong Ho Cho, Hyunsu Ju, Youngmin Lee, et al.

    Growing interest in organic electrochemical synaptic transistors (OECT‐STrs) based on conjugated polymer mixed ionic‐electronic conductors (CP‐MIECs) has intensified, leading to the need to establish clear design rules and fundamentally understand the distinct roles of crystalline and amorphous domains in the electrochemical doping behavior of CP‐MIEC films. Here, OECT‐STrs based on regioregular‐block‐regiorandom (regioblock) conjugated copolymers with precisely controlled crystallinity are demonstrated. The crystallinity of a poly(3‐hexylthiophene) regioblock copolymer is systematically tuned by varying the fraction of regiorandom blocks without altering the geometry or orientation of the crystalline phase. It is shown that incorporating an amorphous phase into the active channel of OECT‐STrs significantly enhances the neuromorphic learning efficiency by improving modulation uniformity. This improvement results from sequential polaron formation in the amorphous regions and bipolaron formation in the crystalline domains during potentiation. Additionally, crystalline phases provide better state retention at low potentiation states, while amorphous phases contribute to improved long‐term retention at high potentiation states by enhancing charge carrier localization through stronger Coulombic interactions. Neural network simulations based on actual device conductance demonstrate that OECT‐STrs with a high amorphous fraction consume only 18% of the power required by devices with a highly crystalline film, owing to the need for fewer repetitive learning cycles.


  • Wearable and implantable microfluidic technologies for future digital therapeutics

    by Sanghoon Lee, Won Gi Chung, Enji Kim, Eunmin Kim, Joonho Paek, Dayeon Kim, Seung Hyun An, Taekyeong Lee, Jung Ah Lim, Jang-Ung Park

    Recent advances in wearable and implantable microfluidics enable real-time sensing, drug delivery, and closed-loop therapy, with emerging trends in stretchability, multimodal integration, and AI-driven data processing.