Paula M. V. Fernandes

The integration of bacteriophages, a particular class of viruses that specifically infect bacteria and archaea, in biosensors for the monitoring of pathogens in foods and beverages is highly desirable. To this end, an increasing focus has been set on the exploration of covalent and physical methods for the immobilization of phages on solid surfaces. This work investigates the electrostatic assembly of tailed phages, specifically anti-Listeria monocytogenes P100 phages, on an ultrathin self-assembled monolayer (SAM) of 11-amino-1-undecanethiol (AUT). The cationic properties of AUT may allow for the electrostatic capture of P100 in a capsid-down fashion, thereby exposing the specific receptor-binding proteins on their tails to the corresponding pathogens in the analytical samples. The morphology and charge transfer behavior of the assembled films were studied with atomic force microscopy, scanning electron microscopy and electrochemical techniques. These methods provided valuable insights into the orientation of the phages and the relevant role of the pH. Biological plaque assays revealed that the immobilized phages remain active towards the target bacterium. Overall, this research portrays SAMs of amino-akylthiols as a valid platform for the oriented immobilization of bacteriophages on surfaces for electroanalytical purposes.

The integration of bacteriophages, a particular class of viruses that specifically infect bacteria and archaea, in biosensors for the monitoring of pathogens in foods and beverages is highly desirable. To this end, an increasing focus has been set on the exploration of covalent and physical methods for the immobilization of phages on solid surfaces. This work investigates the electrostatic assembly of tailed phages, specifically anti-Listeria monocytogenes P100 phages, on an ultrathin self-assembled monolayer (SAM) of 11-amino-1-undecanethiol (AUT). The cationic properties of AUT may allow for the electrostatic capture of P100 in a capsid-down fashion, thus, exposing the specific receptor-binding proteins on their tails to the corresponding pathogens in analytical samples. The physical properties of immobilized phages have been studied using AFM, SEM, and electrochemical techniques, providing insight into the orientation of the phages and revealing that the pH plays a remarkable role in the morphology and charge transfer behavior of the adsorbed films. Overall, this research portrays SAMs of amino-akylthiols as a valid platform for the oriented immobilization of bacteriophages on surfaces for electroanalytical purposes.

The possible fabrication of porous anodic oxide films on aluminium in ionic liquids based on choline dihydrogen citrate eutectic mixtures both with oxalic acid and isopropyl alcohol and ethylene glycol, has been investigated. The anodisation has been carried out in either potentiostatic or galvanostatic regime, at temperatures of 45–80°C, for different process durations. Quite compact, uniform anodic alumina layers have been obtained. Based on AFM and SEM investigations, pore diameters between 50 and 80 nm and interpore distances in the range of 160–200 nm have been estimated, with values influenced by the electrolyte type and anodisation conditions. The highest anodisation rate of about 0.4 µm min⁻¹ has been determined by applying operation temperatures of 60°C. The recorded EIS spectra showed a pure capacitive behaviour and high anodic oxide resistances of 10⁶–10⁷ Ω cm² order.

A hybrid conjugate of reduced graphene oxide/ferrous-ferric oxide nanoparticles (rGO-Fe₃O₄ NPs) is characterized and assembled with chitosan and laccase to form a layered functional superstructure. After its characterization by field-effect scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy, attenuated total reflectance Fourier transform infrared, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), the nanocomposite has been deposited on glassy carbon for the enzyme-mediated electrochemical determination of the endocrine disruptor bisphenol A (BPA). Proof-of-concept assays conducted by using CV, EIS, and square wave voltammetry reveal that the enzymatic biosensor provides linear response in a wide range of BPA concentrations (6–228 ppb), very high sensitivities, and excellent durability (over 1-month storage). Using amperometric detection, remarkable sensitivities (2080 μA μM⁻¹ cm⁻²) and detection limits (18 nM) are attained. Applications to real samples of bottled water proved feasible with recoveries in the range 107–124%. Reduced graphene oxide conjugated with magnetite nanoparticles (rGO-Fe₃O₄) was assembled with laccase (wine-colored dots) and chitosan for the electrochemical determination of bisphenol A. The enzymatic biosensor exhibited excellent linearity (6–228 ppb) and stability. Best sensitivity (2080 μA μM⁻¹ cm⁻², detection limit 18 nM) was obtained by amperometry.

This work reports the role of different dispersants, namely, polyethylene glycol (PEG 200 2%), ethylene glycol 5%, ethanol 2%, dimethyl sulfoxide (DMSO 5%), and polyvinyl alcohol (PVA 5%) in the toxicity profile of several commercial nanomaterials (NM), such as hydrophilic and hydrophobic TiO₂, hydrophilic SiO₂, SiO₂ in aqueous suspension (aq), and ZnO towards the bioluminescent bacterium Aliivibrio fischeri. The majority of NM showed tendency to form agglomerates in the different dispersants. Although some particle agglomeration could be detected, DMSO at 5% was the best dispersant for hydrophobic TiO₂ NM while PVA at 5% was the most effective dispersant for the other types of NM. Average size was not the most relevant aspect accounting for their toxicity. A remarkable reduction in average size was followed by a decrease in NM toxicity, as demonstrated for SiO₂ aq. in PVA 5%. Contrarily, despite of high particle agglomeration, ZnO NM showed a higher toxicity to bacteria when compared with other tested NM. Independently of the average particle size or surface charge, the dispersant either enhanced the toxicity to bacteria or acted as physical barrier decreasing the NM harmful effect to A. fischeri.

The present work reports the effect of polysaccharides (chitosan and sodium alginate) on silica nanoparticles (SiNP) for hydrophilic molecules delivery taking insulin as model drug. The influence of tetraethyl orthosilicate (TEOS) and homogenization speed on SiNP properties was assessed by a 2² factorial design achieving as optimal parameters: 0.43 mol/L of TEOS and homogenization speed of 5000 rpm. SiNP mean particle size (Z-Ave) was of 256.6 nm and polydispersity index (PI) of 0.218. SiNP coated with chitosan (SiNP-CH) or sodium alginate (SiNP-SA) increased insulin association efficacy; reaching 84.6% (SiNP-SA) and 90.8% (SiNP-CH). However, coated SiNP released 50–60% of the peptide during the first 45 min at acidic environment, while uncoated SiNP only released ~30%. Similar results were obtained at pH 6.8. The low Akaike’s (AIC) values indicated that drug release followed Peppas model for SiNP-SA and second order for uncoated SiNP and SiNP-CH (pH 2.0). At pH 6.8, the best fitting was Boltzmann for Ins-SiNP. However, SiNP-CH and SiNP-SA showed a first-order behavior. Cytotoxicity of nanoparticles, assessed in Caco-2 and HepG2 cells, showed that 100 to 500 µg/mL SiNP-CH and SiNP-SA slightly decreased cell viability, comparing with SiNP. In conclusion, coating SiNP with selected polysaccharides influenced the nanoparticles physicochemical properties, the insulin release, and the effect of these nanoparticles on cell viability.

Hybrid conjugates of graphene with metallic/semiconducting nanostructures can improve the sensitivity of electrochemical sensors due to their combination of well-balanced electrical/electrocatalytic properties and superior surface-to-volume ratio. In this study, the synthesis and physical characterization of a hybrid conjugate of reduced graphene oxide and nickel nanoparticles (rGO-Ni NPs) is presented. The conjugate was further deposited onto a glassy carbon electrode as a nanocomposite film of chitosan and glucose oxidase. The electrochemical response and morphology of the films were investigated using SEM, CV, and EIS, and their applications as a glucose biosensor explored for the first time in proof-of-concept tests. The low operating potential along with the good linearity and sensitivity (up to 129 μA cm⁻² mM⁻¹) found in the sub-millimolar range suggest potential applications in the self-management of hypoglycemia from blood samples or in the development of non-invasive assays for body fluids such as saliva, tears or breath.

Electropolymerization from deep eutectic solvents (DES), a green alternative to room temperature ionic liquids, could be a convenient route to the fabrication of organic semiconductors at lower economic and environmental cost which has been barely studied in the literature. This work explores the novel use of choline-based solvents in the electrosynthesis of Polyaniline (PANI), a model conducting polymer. Different mixtures of choline chloride with ethylene glycol (Ethaline), glycerol (Glyceline), and urea (Reline) were prepared for these purposes. PANI was grown and characterized in-situ by Cyclic Voltammetry. Ex situ Scanning Electron Microscopy (SEM) unveiled the formation of dense matrices in the nanoscale from Ethaline and Glyceline but just a bunch of clusters from Reline. The large amounts of ionic and H bond donor species in these formulations, led to conductivities ten times higher than those for aqueous PANI (σ≈63 S·cm⁻¹), great reversibility for the transitions between the different redox states of the polymer (indicating efficient charge transport and low amount of charge traps), and a limited stability toward continuous potential cycling in DES (associated to the increase in the water content). Nonetheless, the latter was significantly improved in aqueous media. More generally, the feasibility of electropolymerization processes using DES is demonstrated.