Zongde Fang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zongde Fang has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Chao Jia
Fuzhou University
4 shared publications - Fang Guo
School of Construction Machinery, Chang’an University, Xi’an 710064, China
4 shared publications - Xijin Zhang
School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, Shaanxi, China
4 shared publications - Yabin Guan
School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an, China
3 shared publications Guoding Chen
School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an, China
2 shared publicationsHaitao Jia
No. 703 Research Institute of China Shipbuilding Industry Corporation, Harbin, China
2 shared publications
Latest Publications
- 12 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (9) , 3261-3276
The overall transmission error and profile modification optimization of planetary gear trains considering phase difference between the gear pairs
The overall transmission error and phase difference between the internal and external gear meshing pairs in planetary gear trains (PGTs) play crucial roles in vibration reduction design. However, these factors have received limited attention in existing studies concerning the dynamics and tooth profile modification of PGTs. In this paper, a shifted spur planetary gear system is employed as a case study. The formulation for calculating the phase difference of both internal and external meshing pairs is derived. Furthermore, a new time-varying meshing stiffness model incorporating the phase difference is proposed based on Tooth Contact Analysis (TCA) and Loaded Tooth Contact Analysis (LTCA). The calculation method for the overall transmission error considering the phase difference is provided. An optimization method for tooth profile modification is developed to minimize the fluctuation amplitude of the overall transmission error, and applied to a shifted spur planetary gear system. Utilizing the time-varying meshing stiffness and phase differences of both internal and external meshing pairs, a dynamic model of the planetary transmission system is established. Dynamic simulations based on this model confirm the effectiveness of the proposed profile modification strategy, demonstrating a significant reduction in the vibration acceleration of the sun gear. In summary, optimizing the tooth profile to suppress fluctuations in overall transmission error enhances the vibration reduction performance of planetary transmission systems.
- 12 February 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 240 (9) , 3261-3276
The overall transmission error and profile modification optimization of planetary gear trains considering phase difference between the gear pairs
The overall transmission error and phase difference between the internal and external gear meshing pairs in planetary gear trains (PGTs) play crucial roles in vibration reduction design. However, these factors have received limited attention in existing studies concerning the dynamics and tooth profile modification of PGTs. In this paper, a shifted spur planetary gear system is employed as a case study. The formulation for calculating the phase difference of both internal and external meshing pairs is derived. Furthermore, a new time-varying meshing stiffness model incorporating the phase difference is proposed based on Tooth Contact Analysis (TCA) and Loaded Tooth Contact Analysis (LTCA). The calculation method for the overall transmission error considering the phase difference is provided. An optimization method for tooth profile modification is developed to minimize the fluctuation amplitude of the overall transmission error, and applied to a shifted spur planetary gear system. Utilizing the time-varying meshing stiffness and phase differences of both internal and external meshing pairs, a dynamic model of the planetary transmission system is established. Dynamic simulations based on this model confirm the effectiveness of the proposed profile modification strategy, demonstrating a significant reduction in the vibration acceleration of the sun gear. In summary, optimizing the tooth profile to suppress fluctuations in overall transmission error enhances the vibration reduction performance of planetary transmission systems.
- 17 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 240 (5) , 771-789
Dynamic characteristic analysis of S-type profile herringbone gear system considering time-varying friction under mixed elastohydrodynamic lubrication
This study systematically investigates the influence of the time-varying friction under mixed elastohydrodynamic lubrication (EHL) on the dynamic response of S-type profile herringbone gears through theoretical modeling and numerical simulation. A high-precision 3D mesh model is constructed based on the tooth profile and meshing line equations. The time-varying meshing stiffness (TVMS) is obtained through finite element analysis and the relative sliding and coiling velocities are determined. Considering nonlinear factors such as TVMS, tooth side backlash and comprehensive meshing errors, an ordinary dynamic model is established to calculate the initial dynamic meshing force (DMF). The friction under mixed EHL is then introduced, and a dynamic model incorporating friction is coupled with the mixed EHL model for iterative solving of the time-varying friction. Through numerical simulation, the variations of the friction coefficient under different operating conditions and its influence on the dynamic response of the gear system are explored. The results indicate that the S-type profile herringbone gear exhibits lower vibration amplitudes compared to the conventional involute gear under identical conditions. Furthermore, friction significantly affects not only the vibration amplitude but also the frequency-domain characteristics and dynamic stability of the S-type herringbone gear system. Notably, within high-frequency ranges, the presence of friction causes the system to enter chaos earlier, while simultaneously suppressing chaotic motion.
- 17 August 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 240 (5) , 771-789
Dynamic characteristic analysis of S-type profile herringbone gear system considering time-varying friction under mixed elastohydrodynamic lubrication
This study systematically investigates the influence of the time-varying friction under mixed elastohydrodynamic lubrication (EHL) on the dynamic response of S-type profile herringbone gears through theoretical modeling and numerical simulation. A high-precision 3D mesh model is constructed based on the tooth profile and meshing line equations. The time-varying meshing stiffness (TVMS) is obtained through finite element analysis and the relative sliding and coiling velocities are determined. Considering nonlinear factors such as TVMS, tooth side backlash and comprehensive meshing errors, an ordinary dynamic model is established to calculate the initial dynamic meshing force (DMF). The friction under mixed EHL is then introduced, and a dynamic model incorporating friction is coupled with the mixed EHL model for iterative solving of the time-varying friction. Through numerical simulation, the variations of the friction coefficient under different operating conditions and its influence on the dynamic response of the gear system are explored. The results indicate that the S-type profile herringbone gear exhibits lower vibration amplitudes compared to the conventional involute gear under identical conditions. Furthermore, friction significantly affects not only the vibration amplitude but also the frequency-domain characteristics and dynamic stability of the S-type herringbone gear system. Notably, within high-frequency ranges, the presence of friction causes the system to enter chaos earlier, while simultaneously suppressing chaotic motion.
- 28 February 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 239 (11) , 1458-1477
Geometry design, tooth wear evaluation and pressure angle influence analysis of asymmetric face gear considering load sharing of multi-pair contact
In response to the new requirements for face gear transmissions in the latest heavy-load helicopters, this paper investigates the impact of pressure angle variations on the geometric contact and performance of asymmetric face gears. Firstly, using meshing theory, the tooth surface equations for asymmetric rack cutter, shaper, and face gear are derived, and the parameterized 3D models are created. Secondly, the line of action (LOA), contact ratio, contact point curvature, and load sharing ratio considering multi-pair contact (MPC) under different pressure angles are analyzed. Then, a wear calculation model based on the Archard wear equation is developed, detailing the tooth surface wear depth calculation. Finally, a case study calculates the contact stress and wear depth under different pressure angles is presented. The results indicate that appropriately increasing the pressure angle effectively lower the contact stress and wear depth on tooth surface, although further increases degrade meshing performance. The gear pair with a pressure angle of 30° in the case study exhibits optimal performance. This study provides a reference for optimizing asymmetric face gear meshing performance under various pressure angles.
- 28 February 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 239 (11) , 1458-1477
Geometry design, tooth wear evaluation and pressure angle influence analysis of asymmetric face gear considering load sharing of multi-pair contact
In response to the new requirements for face gear transmissions in the latest heavy-load helicopters, this paper investigates the impact of pressure angle variations on the geometric contact and performance of asymmetric face gears. Firstly, using meshing theory, the tooth surface equations for asymmetric rack cutter, shaper, and face gear are derived, and the parameterized 3D models are created. Secondly, the line of action (LOA), contact ratio, contact point curvature, and load sharing ratio considering multi-pair contact (MPC) under different pressure angles are analyzed. Then, a wear calculation model based on the Archard wear equation is developed, detailing the tooth surface wear depth calculation. Finally, a case study calculates the contact stress and wear depth under different pressure angles is presented. The results indicate that appropriately increasing the pressure angle effectively lower the contact stress and wear depth on tooth surface, although further increases degrade meshing performance. The gear pair with a pressure angle of 30° in the case study exhibits optimal performance. This study provides a reference for optimizing asymmetric face gear meshing performance under various pressure angles.
- 9 October 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 237 (4) , 639-654
An effective modelling approach for multi-body dynamic analysis of epicyclic gear train of GTF considering both structural flexibility and mechanical interactions
In this paper, a new modelling approach is proposed for the dynamic investigation of epicyclic gear train, and the novelty of this work lies in consideration of both structural flexibility and mechanical interactions during the analysis procedure. The method is of capacity to directly present the dynamic results of the supporting structure for convenient practical engineering evaluation and reduce the dimension of the system reasonably with appropriate assumptions for better computational efficiency. Firstly, the mechanical interactions among components are discussed in detail, and the principle that the structural flexibility works is also explained at length. Secondly, taking the epicyclic gear train of the geared turbofan (GTF) engine; for example, the dynamic model of the system is then established based on the developed hybrid user-defined elements. For model validation, the governing equations of the system are also derived by the lumped mass method. Thirdly, with the same values of the parameters, the results of normal dynamic meshing force obtained by the proposed model are compared with the ones by the lumped mass model. It can be stated from the data that (1) the maximum relative error between the theoretical value and the average value calculated by the two models is 8.28%, (2) the gear mesh frequency obtained by the two models are sufficiently close to the theoretical value, and (3) the fluctuation trends of the dynamic force keep basically consistent with each other. In summary, the comparison presented clearly indicates that the proposed model is indeed reasonable, which provides a new way for dynamic investigation and structural redesign of a large epicyclic gear train. Finally, as a practical engineering application, the vibration result of the deformable supporting structure of the GTF gear train is also presented, which directly provides valuable reference for vibration monitoring, fault diagnosis and other engineering problems in practice.
- 9 October 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 237 (4) , 639-654
An effective modelling approach for multi-body dynamic analysis of epicyclic gear train of GTF considering both structural flexibility and mechanical interactions
In this paper, a new modelling approach is proposed for the dynamic investigation of epicyclic gear train, and the novelty of this work lies in consideration of both structural flexibility and mechanical interactions during the analysis procedure. The method is of capacity to directly present the dynamic results of the supporting structure for convenient practical engineering evaluation and reduce the dimension of the system reasonably with appropriate assumptions for better computational efficiency. Firstly, the mechanical interactions among components are discussed in detail, and the principle that the structural flexibility works is also explained at length. Secondly, taking the epicyclic gear train of the geared turbofan (GTF) engine; for example, the dynamic model of the system is then established based on the developed hybrid user-defined elements. For model validation, the governing equations of the system are also derived by the lumped mass method. Thirdly, with the same values of the parameters, the results of normal dynamic meshing force obtained by the proposed model are compared with the ones by the lumped mass model. It can be stated from the data that (1) the maximum relative error between the theoretical value and the average value calculated by the two models is 8.28%, (2) the gear mesh frequency obtained by the two models are sufficiently close to the theoretical value, and (3) the fluctuation trends of the dynamic force keep basically consistent with each other. In summary, the comparison presented clearly indicates that the proposed model is indeed reasonable, which provides a new way for dynamic investigation and structural redesign of a large epicyclic gear train. Finally, as a practical engineering application, the vibration result of the deformable supporting structure of the GTF gear train is also presented, which directly provides valuable reference for vibration monitoring, fault diagnosis and other engineering problems in practice.
- 18 April 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 237 (2) , 279-289
Transform of parameter and teeth surface modification for non-standard planetary spur gear train with X-gears
In view of the lack of ready formulae for modification calculation of non-standard planetary spur gear trains, the paper is focused on new modification methods of non-standard planetary spur gear trains with X-gears. Firstly, a novelty transform method from the parameters on the pitch circle to the parameters on the reference circle for a non-standard planetary spur gear train with X-gears is proposed in order to study the modification method. Secondly, a scheme of teeth surface modification for non-standard planetary spur gear train with X-gears is put forward. Thirdly, the calculation method of loaded transmission error and flash temperature on the tooth surface under mixed elastohydrodynamic lubrication for external meshing spur gear pairs is proposed using tooth contact analysis as well as loaded tooth contact analysis. Then, a new modification optimization method for non-standard planetary spur gear train with X-gears is proposed, and formulae of the maximal modification length along the tooth height are derived. Finally, the effectiveness of the modification optimization method is confirmed by an example, and the transform formulae of the optimized modification parameters for sun gear are derived.
- 18 April 2023
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 237 (2) , 279-289
Transform of parameter and teeth surface modification for non-standard planetary spur gear train with X-gears
In view of the lack of ready formulae for modification calculation of non-standard planetary spur gear trains, the paper is focused on new modification methods of non-standard planetary spur gear trains with X-gears. Firstly, a novelty transform method from the parameters on the pitch circle to the parameters on the reference circle for a non-standard planetary spur gear train with X-gears is proposed in order to study the modification method. Secondly, a scheme of teeth surface modification for non-standard planetary spur gear train with X-gears is put forward. Thirdly, the calculation method of loaded transmission error and flash temperature on the tooth surface under mixed elastohydrodynamic lubrication for external meshing spur gear pairs is proposed using tooth contact analysis as well as loaded tooth contact analysis. Then, a new modification optimization method for non-standard planetary spur gear train with X-gears is proposed, and formulae of the maximal modification length along the tooth height are derived. Finally, the effectiveness of the modification optimization method is confirmed by an example, and the transform formulae of the optimized modification parameters for sun gear are derived.
- 22 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (19) , 10175-10184
Research on methods of tooth contact analysis and modification optimization for internal spur gear pair
Internal spur gear pair is widely used in industry. There is little current research on how to analyze and modify internal spur gear pairs that affect design and transmission performance. In this paper, a modeling method and an improved tooth contact analysis (TCA) method for internal spur gear pair are presented. The comparison between the improved TCA method and conventional TCA method is done, and the correctness and advantage of the improved TCA method are proved. The loaded tooth contact analysis (LTCA) method for spur gear pair is studied, and its feasibility is verified by Romax. Based on the method of penalty function, a modification optimization method of internal spur gear pair is proposed. Compared with the conventional particle swarm modification optimization, the proposed modification optimization method of internal spur gear pair is suitable for engineering application from the view of time-consuming and result. In order to facilitate modification, a modification parameter conversion method is proposed, and the conversion formulas from the modification length on tooth root of pinion to that on tooth tip of ring gear is derived. A dynamic model for internal spur gear pair is built, and dynamic simulation is carried out. The analysis results show that the optimization of the correction can significantly reduce the mean square value of the vibration acceleration. The research results supply a basis for the analysis and the modification optimization of internal spur gear pair.
- 22 May 2022
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (19) , 10175-10184
Research on methods of tooth contact analysis and modification optimization for internal spur gear pair
Internal spur gear pair is widely used in industry. There is little current research on how to analyze and modify internal spur gear pairs that affect design and transmission performance. In this paper, a modeling method and an improved tooth contact analysis (TCA) method for internal spur gear pair are presented. The comparison between the improved TCA method and conventional TCA method is done, and the correctness and advantage of the improved TCA method are proved. The loaded tooth contact analysis (LTCA) method for spur gear pair is studied, and its feasibility is verified by Romax. Based on the method of penalty function, a modification optimization method of internal spur gear pair is proposed. Compared with the conventional particle swarm modification optimization, the proposed modification optimization method of internal spur gear pair is suitable for engineering application from the view of time-consuming and result. In order to facilitate modification, a modification parameter conversion method is proposed, and the conversion formulas from the modification length on tooth root of pinion to that on tooth tip of ring gear is derived. A dynamic model for internal spur gear pair is built, and dynamic simulation is carried out. The analysis results show that the optimization of the correction can significantly reduce the mean square value of the vibration acceleration. The research results supply a basis for the analysis and the modification optimization of internal spur gear pair.
- Open Access
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Investigation of Load Sharing and Dynamic Load Characteristics of a Split Torque Transmission System with Double‐Helical Gear Modification
A new dynamic model for a two‐input two‐path split torque transmission system which considers meshing error, time‐varying meshing stiffness, and meshing‐in impact is proposed. Time‐varying meshing stiffness and meshing‐in impact of each gear pair are accurately calculated based on tooth contact analysis and loaded tooth contact analysis. Equivalent displacements of eccentricity error and installation error along the meshing line of second‐ and third‐stages gears are derived. The modified tooth surface of a third‐stage double‐helical gear is obtained by optimizing the amplitude of static loaded transmission error and meshing‐in impact via nondominated sorting genetic algorithm‐II (NSGA‐II). Influence of modification on load sharing and dynamic load characteristics of split torque transmission system is investigated. The results indicate that the system’s dynamic meshing force increases when meshing‐in impact is accounted for, which is unfavorable for the transmission. Following the modification of a double‐helical gear, the dynamic load characteristics of the split torque transmission system are significantly improved, while its load sharing characteristics are improved to a certain extent.
- 1 January 2021
- Published by Wiley in Shock and Vibration
- Vol. 2021 (1)
Open AccessInvestigation of Load Sharing and Dynamic Load Characteristics of a Split Torque Transmission System with Double‐Helical Gear Modification
A new dynamic model for a two‐input two‐path split torque transmission system which considers meshing error, time‐varying meshing stiffness, and meshing‐in impact is proposed. Time‐varying meshing stiffness and meshing‐in impact of each gear pair are accurately calculated based on tooth contact analysis and loaded tooth contact analysis. Equivalent displacements of eccentricity error and installation error along the meshing line of second‐ and third‐stages gears are derived. The modified tooth surface of a third‐stage double‐helical gear is obtained by optimizing the amplitude of static loaded transmission error and meshing‐in impact via nondominated sorting genetic algorithm‐II (NSGA‐II). Influence of modification on load sharing and dynamic load characteristics of split torque transmission system is investigated. The results indicate that the system’s dynamic meshing force increases when meshing‐in impact is accounted for, which is unfavorable for the transmission. Following the modification of a double‐helical gear, the dynamic load characteristics of the split torque transmission system are significantly improved, while its load sharing characteristics are improved to a certain extent.
- 9 December 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 235 (19) , 4475-4493
Tooth flank modification to reduce transmission error and mesh-in impact force in consideration of contact ratio for helical gears
In this paper, a new tooth modification method considering the contact ratio of gears and a new method for calculating the mesh-in impact force of modified helical gears are proposed. The new method for calculating the mesh-in impact force is based on tooth contact analysis and loaded tooth contact analysis. The mesh-in impact position can be calculated accurately via the new method. First, the procedures for creating the new tooth modification and the details of calculation method of the mesh-in impact force are exhibited. Second, the optimal modification of the tooth flank is achieved by solving the optimization problem. Third, a dynamic model of the gear system considering the loaded transmission error and the mesh-in impact force is used to study the dynamic characteristics. Ultimately, numerical examples are presented and the simulation results suggest that the amplitude of the loaded transmission error and the mesh-in impact force can be reduced more effectively based on the introduced new tooth modification method. And the mesh-in impact effects should not be neglected in gear dynamic analysis, regardless of whether the tooth modified or not, especially for high-speed gears.
- 9 December 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 235 (19) , 4475-4493
Tooth flank modification to reduce transmission error and mesh-in impact force in consideration of contact ratio for helical gears
In this paper, a new tooth modification method considering the contact ratio of gears and a new method for calculating the mesh-in impact force of modified helical gears are proposed. The new method for calculating the mesh-in impact force is based on tooth contact analysis and loaded tooth contact analysis. The mesh-in impact position can be calculated accurately via the new method. First, the procedures for creating the new tooth modification and the details of calculation method of the mesh-in impact force are exhibited. Second, the optimal modification of the tooth flank is achieved by solving the optimization problem. Third, a dynamic model of the gear system considering the loaded transmission error and the mesh-in impact force is used to study the dynamic characteristics. Ultimately, numerical examples are presented and the simulation results suggest that the amplitude of the loaded transmission error and the mesh-in impact force can be reduced more effectively based on the introduced new tooth modification method. And the mesh-in impact effects should not be neglected in gear dynamic analysis, regardless of whether the tooth modified or not, especially for high-speed gears.
- 4 January 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 106 (7-8) , 3229-3237
Tooth surface modification method of face-milling spiral bevel gears with high contact ratio based on cutter blade profile correction
- 4 January 2020
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 106 (7-8) , 3229-3237
Tooth surface modification method of face-milling spiral bevel gears with high contact ratio based on cutter blade profile correction
- Open Access
- 19 July 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 234 (1) , 3-18
The statistical analysis of the dynamic performance of a gear system considering random manufacturing errors under different levels of machining precision
Gear manufacturing error is one of the main sources of vibration and noise in gears; its influence on the dynamic transmission behaviour of gear systems is a research hotspot. In the current study on the effect of the manufacturing errors, the processing methods of the errors are mostly rough or hypothetical, so the analysis results cannot provide high reference value. This paper proposes a distinctive method to analyse the vibration response of helical gears in the presence of random manufacturing errors and modifications. The presented study performs tooth contact analysis (TCA) with the real tooth surface containing the random tooth profile error and the modification and performs loaded tooth contact analysis (LTCA) based on the superposition of the random pitch error and the initial gap between mating teeth obtained by TCA. Furthermore, the dynamic excitations, including time-varying mesh stiffness and meshing impact, are computed using the above-mentioned TCA and LTCA. The processing method for the manufacturing errors in this paper is reasonable and close to the actual situation of gear engagement. Using this proposed method, statistical analysis was carried out under machining accuracy grades 5, 6 and 7 to show the effect of the different distributions of random manufacturing errors on the gear vibration. The analysis results are of practical significance and provide references for the design and vibration control of gear drive systems.
- 19 July 2019
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 234 (1) , 3-18
Open AccessThe statistical analysis of the dynamic performance of a gear system considering random manufacturing errors under different levels of machining precision
Gear manufacturing error is one of the main sources of vibration and noise in gears; its influence on the dynamic transmission behaviour of gear systems is a research hotspot. In the current study on the effect of the manufacturing errors, the processing methods of the errors are mostly rough or hypothetical, so the analysis results cannot provide high reference value. This paper proposes a distinctive method to analyse the vibration response of helical gears in the presence of random manufacturing errors and modifications. The presented study performs tooth contact analysis (TCA) with the real tooth surface containing the random tooth profile error and the modification and performs loaded tooth contact analysis (LTCA) based on the superposition of the random pitch error and the initial gap between mating teeth obtained by TCA. Furthermore, the dynamic excitations, including time-varying mesh stiffness and meshing impact, are computed using the above-mentioned TCA and LTCA. The processing method for the manufacturing errors in this paper is reasonable and close to the actual situation of gear engagement. Using this proposed method, statistical analysis was carried out under machining accuracy grades 5, 6 and 7 to show the effect of the different distributions of random manufacturing errors on the gear vibration. The analysis results are of practical significance and provide references for the design and vibration control of gear drive systems.