HAHitoshi Asakawa

Hitoshi Asakawa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hitoshi Asakawa has a total of 233 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Helical Single Crystals of Porous Hydrogen‐Bonded Organic Frameworks as a Candidate for Morphologically Functional Organic Materials

    by Yuzuki Murata, Taito Hashimoto, Ryusei Oketani, Miki Naruoka, Yuuya Nagata, Ryosuke Tamura, Masayuki Morimoto, Mio Yamashita, Daisuke Sakamaki, Norimitsu Tohnai, et al.

    Modulation and control of the crystalline morphology of porous materials are important for their functionality yet remain underdeveloped. In this study, we report the first example of a porous hydrogen‐bonded organic framework (HOF) with helical crystalline morphology. The helical HOF was prepared using pyrene‐based tetracarboxylic acid. The formation of helical‐shaped and needle‐shaped crystals of the HOFs can be controlled by the solvent evaporation rate and temperature during heating. X‐ray diffraction analysis indicates that both crystals have the same layered porous structure. Based on these data and theoretical calculations, we propose the hypothesis that certain structural defects are locally generated, which induces nonuniform crystal growth and consequently results in the formation of the helical crystals. The obtained HOFs exhibit thermal stability and permanent porosity with Brunauer‐Emmett‐Teller (BET) surface area up to 1602 m 2  g −1 . Interestingly, the helical HOFs exhibited dynamic expansion and contraction through the desorption and adsorption of a guest solvent. Moreover, doping with a second component in the helical HOF enables the modulation of fluorescence properties and crystalline morphology into a double helix. These results highlight the potential of a new category of organic materials: helical porous crystals and morphologically functional organic materials.

  • Open Access

    Helical Single Crystals of Porous Hydrogen‐Bonded Organic Frameworks as a Candidate for Morphologically Functional Organic Materials

    by Yuzuki Murata, Taito Hashimoto, Ryusei Oketani, Miki Naruoka, Yuuya Nagata, Ryosuke Tamura, Masayuki Morimoto, Mio Yamashita, Daisuke Sakamaki, Norimitsu Tohnai, et al.

    Modulation and control of the crystalline morphology of porous materials are important for their functionality yet remain underdeveloped. In this study, we report the first example of a porous hydrogen‐bonded organic framework (HOF) with helical crystalline morphology. The helical HOF was prepared using pyrene‐based tetracarboxylic acid. The formation of helical‐shaped and needle‐shaped crystals of the HOFs can be controlled by the solvent evaporation rate and temperature during heating. X‐ray diffraction analysis indicates that both crystals have the same layered porous structure. Based on these data and theoretical calculations, we propose the hypothesis that certain structural defects are locally generated, which induces nonuniform crystal growth and consequently results in the formation of the helical crystals. The obtained HOFs exhibit thermal stability and permanent porosity with Brunauer‐Emmett‐Teller (BET) surface area up to 1602 m 2  g −1 . Interestingly, the helical HOFs exhibited dynamic expansion and contraction through the desorption and adsorption of a guest solvent. Moreover, doping with a second component in the helical HOF enables the modulation of fluorescence properties and crystalline morphology into a double helix. These results highlight the potential of a new category of organic materials: helical porous crystals and morphologically functional organic materials.

  • Trace-Level Detection of a Niacin Metabolite in Human Blood under Phosphonate Pillar[6]arene-Induced Columnar-Like Aggregation Conditions

    by Xi Chen, Hiroki Sugiyama, Tatsuya Nishimura, Masaya Ueno, Hitoshi Asakawa, Mio Yamashita, De-Hui Tuo, Rikako Imamura, Yusuke Masuo, Keisuke Maeda, et al.

    A rapid method for quantifying the niacin metabolite 1-methylnicotinamide (1-MNA) in human blood is required to address the limitations of existing low-throughput techniques such as mass spectrometry. In previous studies, we demonstrated that supramolecular pillar[6]arenes (P6As) bearing either carboxylate groups (P6AC) or sulfonate groups (P6AS) functioned as "turn-off" fluorescent sensors for 1-MNA detection in urine by photoinduced electron transfer (PET). However, because the concentration of 1-MNA in blood is very low, PET-based detection in aqueous solutions was insufficient for reliable quantification on its own. Here, we report that phosphonate-functionalized P6A (P6AP) in 90% acetonitrile formed aggregates with columnar morphology, which was associated with markedly enhanced detection sensitivity for 1-MNA. Under these conditions, aggregation-induced emission (AIE) resulted in increases in the fluorescence intensity, photoluminescence quantum yield, and photoluminescence lifetime. The addition of 1-MNA suppressed the formation of columnar aggregates of P6AP, and this was accompanied by decreases in the fluorescence intensity, photoluminescence quantum yield, and photoluminescence lifetime. This solvation-dependent fluorescence response substantially improved the detection sensitivity for 1-MNA, enabling its detection in human blood. By contrast, in 80% acetonitrile, P6AP showed AIE but did not exhibit similar columnar aggregates or increase the sensitivity. Overall, the aggregation-state-associated enhancement of the fluorescence response provides a functional framework that enhances fluorescence-based detection and represents a promising platform for extension to a broad range of biologically relevant analytes.

  • Open Access

    Cooperative Host–Guest Complexation in Densely Assembled Host Structures on Surfaces Revealed at the Single-Molecular Level

    by Hitoshi Asakawa, Hiroka Hatano, Shixin Fa, Takashi Sumikama, Mikihiro Shibata, Shu Takashima, Moe Ogasawara, Akio Ohta, Tada-Aki Yamagishi, Tomoki Ogoshi

    Reversible association and dissociation are fundamental processes in the behavior of molecular systems. Host–guest chemistry based on supramolecular formation through noncovalent intermolecular interactions is a typical model of a molecular system based on association–dissociation. High-density assembly of host structures on surfaces enables the unique host–guest complexation phenomena, such as cooperative effects that differ significantly from those in homogeneous solution systems. However, analytical methods applicable to the phenomena at solid–liquid interfaces are limited and often provide only average or statistical information on the host–guest complexation event. Therefore, such molecular-scale phenomena that are lost in averaging are difficult to understand. Here, we show direct observation of association–dissociation with densely assembled pillar[5]arenes as host structures using two atomic force microscopy (AFM) techniques at the single molecular level. Frequency modulation AFM observations revealed that densely assembled pillar[5]arenes exhibit positive cooperativity, whereby inclusion of a guest at one host site enhances guest binding at neighboring sites separated by one neighboring host molecule, likely due to lateral host–host interactions. In addition, the dynamics of reversible association–dissociation processes of host–guest complexation were also visualized by high-speed AFM.

  • Chemical Control of Supramolecular Copolymerization by Modulating the Chirality Transfer of Helical-Chiral Pillar[5]arenes

    by De-Hui Tuo, Kazuma Yasuhara, Yuuya Nagata, Moe Ogasawara, Hitoshi Asakawa, Shunsuke Ohtani, Kenichi Kato, Tomoki Ogoshi

    Controlling supramolecular polymerization is essential to accessing diverse supramolecular structures. Here, we report a distinct strategy to control supramolecular polymerization through helical-sense-matching-promoted chiral transfer from basic to acidic pillar[5]arene (P5A) monomers. Our strategy uses the fact that a basic P5A monomer bearing bulky tertiary amine substituents acts as a chiral inducer because of its static helicity, whereas an acidic P5A monomer with short aliphatic carboxylic acid groups exhibits dynamic helicity with interconversion between P and M conformers. When we mixed basic P5A (static M-helicity) with acidic P5A (dynamic P- and M-helicity), we obtained a kinetically favored metastable amorphous aggregate. This aggregate formed through multiple helical-sense-matched and -mismatched ion-pairing interactions between the basic and acidic P5A monomers. Subsequently, time-dependent supramolecular polymerization gradually occurred, which transformed the amorphous aggregates into thermodynamically stable nanowires. This process was driven by helical-sense matching, which involved the conversion of the helicity of acidic P5A from P to M and then connection between the M-helical basic and acidic P5A monomers. The polymerization can be accelerated by acidic or basic additives and suppressed by the addition of guest molecules. Because of the multiple helical-sense-matched ion-pairing interactions, the resulting supramolecular copolymer exhibited exceptional stability in polar solvents, at high temperatures, and in harsh environments.


  • Pillar[6]arene Assemblies With Continuous Hydrophobic Grooves for Capture of π‐Conjugated Molecules

    by Tan‐Hao Shi, Chen‐Yi Ma, Mio Yamashita, Ruikang Huang, Kazuma Yasuhara, Hitoshi Asakawa, Shunsuke Ohtani, Kenichi Kato, Tomoki Ogoshi

    Preorganization is a central principle in supramolecular chemistry, enabling selective molecular recognition through confined macrocyclic cavities. Extending this concept from single macrocycles to their assemblies could enable recognition beyond single‐cavity limits. However, it remains unclear how molecular assemblies can be rationally designed to generate collective binding environments and how selective molecular recognition can emerge without well‐defined confinement. Herein, we report a hierarchical assembly comprising a bridge‐functionalized amphiphilic pillar[6]arene that enables selective molecular recognition. Hexagonal pillar[6]arenes first assemble into tubular structures, which further stack into sheets in water, generating continuous hydrophobic grooves between adjacent tube surfaces. These grooves enable selective capture of aromatic hydrocarbons that cannot be accommodated within the intrinsic cavity of pillar[6]arene. The recognition selectivity is governed by a balance between guest surface area and water solubility, allowing efficient separation of structurally similar isomers such as phenanthrene and anthracene. Beyond small hydrocarbons, the use of mechanical grinding allows unsubstituted π‐conjugated polymers, which are generally insoluble in common solvents including water, to be dispersed in water through incorporation within the grooves. Therefore, in the present study we constructed pillar[6]arene assemblies that are capable of external recognition and provide a means of extending host–guest chemistry beyond individual building blocks.

  • Pillar[6]arene Assemblies With Continuous Hydrophobic Grooves for Capture of π‐Conjugated Molecules

    by Tan‐Hao Shi, Chen‐Yi Ma, Mio Yamashita, Ruikang Huang, Kazuma Yasuhara, Hitoshi Asakawa, Shunsuke Ohtani, Kenichi Kato, Tomoki Ogoshi

    Preorganization is a central principle in supramolecular chemistry, enabling selective molecular recognition through confined macrocyclic cavities. Extending this concept from single macrocycles to their assemblies could enable recognition beyond single‐cavity limits. However, it remains unclear how molecular assemblies can be rationally designed to generate collective binding environments and how selective molecular recognition can emerge without well‐defined confinement. Herein, we report a hierarchical assembly comprising a bridge‐functionalized amphiphilic pillar[6]arene that enables selective molecular recognition. Hexagonal pillar[6]arenes first assemble into tubular structures, which further stack into sheets in water, generating continuous hydrophobic grooves between adjacent tube surfaces. These grooves enable selective capture of aromatic hydrocarbons that cannot be accommodated within the intrinsic cavity of pillar[6]arene. The recognition selectivity is governed by a balance between guest surface area and water solubility, allowing efficient separation of structurally similar isomers such as phenanthrene and anthracene. Beyond small hydrocarbons, the use of mechanical grinding allows unsubstituted π‐conjugated polymers, which are generally insoluble in common solvents including water, to be dispersed in water through incorporation within the grooves. Therefore, in the present study we constructed pillar[6]arene assemblies that are capable of external recognition and provide a means of extending host–guest chemistry beyond individual building blocks.


  • Interaction Force Landscapes within and Surrounding Hydrophobic Nanopockets Revealed by Three-Dimensional Scanning Atomic Force Microscopy

    by Moe Ogasawara, Saki Tanaka, Kayo Komatsu, Naoki Kishimoto, Dapeng Zhang, Tomoki Yoneda, Yasuhide Inokuma, Masayuki Morimoto, Akio Ohta, Hitoshi Asakawa

  • Open Access

    Overcoming charge screening via porous nanostructures for attomolar microRNA detection

    by Zetao Zhu, Kazuki Nagashima, Taiga Ajiri, Kunanon Chattrairat, Soma Ishii, Yuta Kazama, Tsunaki Takahashi, Takeshi Yanagida, Masayuki Morimoto, Hitoshi Asakawa, et al.

    Electronic biosensors offer a compact, integrable platform for real-time biomolecular detection, yet their performance is often limited by charge screening in physiological environments. Here, we report a porous ZnO/Al2O3 biosensor with grain boundary-engineered nanostructures that enables attomolar-level (0.5 aM) detection of microRNAs (miRNAs). The porous architecture forms spontaneously during thermal annealing through Zn2+ diffusion toward the Al2O3 layer along the ZnO grain boundaries and through lateral surface diffusion, generating localized porosity at structurally defined sites. These regions disrupt charge neutrality and introduce energy barriers, thereby enhancing surface potential shifts upon miRNA hybridization. The biosensor maintains high sensitivity in high-ionic-strength buffers, indicating effective suppression of Debye screening. Using the CRISPR-Cas13a system, we functionalized the surface with a crRNA targeting miR-17, thereby achieving sequence-specific detection and demonstrating compatibility with programmable molecular recognition. This grain boundary-guided nanostructuring strategy establishes a scalable route to engineering biosensors with localized sensitivity and target selectivity. Our approach provides a platform for ultrasensitive nucleic acid detection and offers strong potential for integration into miniaturized diagnostic systems.

  • Open Access

    Contribution of kinetics and thermodynamics to the metal-mediated assembly of a flexible tripeptide into giant discrete structures

    by Ryosuke Miyake, Shoko Tanaka, Yui Sato, Kento Yonezawa, Masayuki Morimoto, Kaori Ueno-Noto, Dapeng Zhang, Naoki Kishimoto, Hiroka Hatano, Hitoshi Asakawa, et al.

    To develop sophisticated artificial systems that are comparable to those in nature, understanding the principles controlling the assembly of flexible molecules into giant structures is essential. In this study, the metal-mediated self-assembly of a flexible tripeptide into three giant discrete complexes was analyzed using small-angle X-ray scattering along with other experimental and simulation studies. We revealed the kinetic and thermodynamic contributions during the assembly process, which resulted in the selective formation of two giant discrete structures of similar sizes in a water/acetonitrile solution. We also identified the factors that open the kinetic pathway to giant [2]-catenane structures in aqueous solutions. The formation of structures containing multiple components is generally considered kinetically unfavorable. However, our results revealed that solvent molecules and counterions kinetically initiate the formation of giant, multicomponent catenane structures in aqueous solutions.