Hossein Afarideh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hossein Afarideh has a total of 137 co-authors. Here are the top co-authors by number of shared publications:
- Mitra Ghergherehchi
Affiliation Department of Electrical and Computer Engineering, Sungkyunkwan University, Suwon, South Korea
10 shared publications - Ali Bahrami-Samani
Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute (NSTRI), Tehran, Iran
5 shared publications M. Ghergherehchi
Department of Electrical and Computer Engineering, Sungkyunkwan University, P-Box: 16419, Suwon, Republic of Korea
5 shared publications- Masoumeh Mohamadian
Department of Energy Engineering and Physics, Amirkabir University of Technology, Tehran, Iran
4 shared publications Mitra Ghergherehchi
4 shared publicationsMohammad Ghannadi-Maragheh
Nuclear Science and Technology Research Institute (NSTRI), P.O. Box:14395-836, Tehran, Iran
4 shared publications
Latest Publications
- 21 May 2026
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 248
Fast modeling of GEM-based detectors including space-charge effects: a time-dependent simulation approach
- 21 May 2026
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 248
Fast modeling of GEM-based detectors including space-charge effects: a time-dependent simulation approach
- Open Access
- 11 February 2026
- Published by Elsevier in Results in Physics
- Vol. 82
Investigating performance metrics in high volumetric utilization betavoltaic convertors: A Monte Carlo and analytical approach
- 11 February 2026
- Published by Elsevier in Results in Physics
- Vol. 82
Open AccessInvestigating performance metrics in high volumetric utilization betavoltaic convertors: A Monte Carlo and analytical approach
- Open Access
- 15 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 43790
Simulation-based reservoir analysis assisted by chemical tracers transport for the development of enhanced oil recovery strategies
Understanding subsurface fluid flow behavior is essential for optimizing enhanced oil recovery (EOR) strategies in petroleum reservoirs. This study presents a comprehensive tracer-based diagnostic approach combining both aqueous- and gas-phase tracers to characterize pre-EOR water and gas movement in a synthetic reservoir model. Methanol, a conservative aqueous-phase tracer, and perfluoromethylcyclopentane (PMCP), an inert gas tracer, were employed in two separate simulations using the commercial software reservoir simulator. In the water-phase tracer study, methanol was injected to assess water flow dynamics. Tracer recovery ranged from 20% to 29% across four production wells, with water velocities between 0.35 and 0.41 m/d. Breakthrough times varied from 3092 to 4247 days, and mean residence times were estimated between 3900 and 4810 days. The calculated swept pore volume ranged from \(\:5.01\times\:{10}^{6}\) to \(\:7.97\times\:{10}^{6}\) \(m^{3}\). Production Well-2 showed the highest recovery and swept volume, indicating a stronger hydraulic connection with the injection well and making it a suitable candidate for targeted EOR operations. In the gas-phase tracer simulation, PMCP was injected into a gas injection well to evaluate gas flow behavior. Tracer concentration-time curves obtained from four production wells revealed that Production Well-1 exhibited the highest tracer recovery of 38% and the shortest breakthrough time of 796 days, signifying a direct flow path and strong connectivity. Conversely, other wells showed longer residence times up to 1736 days and lower recoveries between 19% and 21%, indicating more complex flow paths and lower sweep efficiency. Differences in swept pore volume among wells underscored the impact of reservoir heterogeneity on gas movement and distribution. The combined results demonstrate the utility of integrating conservative aqueous and inert gas tracers for detailed reservoir characterization. Such dual-phase tracer diagnostics enable identification of preferential flow paths, unswept zones, and inter-well connectivity, thereby facilitating more effective EOR planning and improved reservoir management.- 15 December 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 43790
Open AccessSimulation-based reservoir analysis assisted by chemical tracers transport for the development of enhanced oil recovery strategies
Understanding subsurface fluid flow behavior is essential for optimizing enhanced oil recovery (EOR) strategies in petroleum reservoirs. This study presents a comprehensive tracer-based diagnostic approach combining both aqueous- and gas-phase tracers to characterize pre-EOR water and gas movement in a synthetic reservoir model. Methanol, a conservative aqueous-phase tracer, and perfluoromethylcyclopentane (PMCP), an inert gas tracer, were employed in two separate simulations using the commercial software reservoir simulator. In the water-phase tracer study, methanol was injected to assess water flow dynamics. Tracer recovery ranged from 20% to 29% across four production wells, with water velocities between 0.35 and 0.41 m/d. Breakthrough times varied from 3092 to 4247 days, and mean residence times were estimated between 3900 and 4810 days. The calculated swept pore volume ranged from \(\:5.01\times\:{10}^{6}\) to \(\:7.97\times\:{10}^{6}\) \(m^{3}\). Production Well-2 showed the highest recovery and swept volume, indicating a stronger hydraulic connection with the injection well and making it a suitable candidate for targeted EOR operations. In the gas-phase tracer simulation, PMCP was injected into a gas injection well to evaluate gas flow behavior. Tracer concentration-time curves obtained from four production wells revealed that Production Well-1 exhibited the highest tracer recovery of 38% and the shortest breakthrough time of 796 days, signifying a direct flow path and strong connectivity. Conversely, other wells showed longer residence times up to 1736 days and lower recoveries between 19% and 21%, indicating more complex flow paths and lower sweep efficiency. Differences in swept pore volume among wells underscored the impact of reservoir heterogeneity on gas movement and distribution. The combined results demonstrate the utility of integrating conservative aqueous and inert gas tracers for detailed reservoir characterization. Such dual-phase tracer diagnostics enable identification of preferential flow paths, unswept zones, and inter-well connectivity, thereby facilitating more effective EOR planning and improved reservoir management. - Open Access
- 7 November 2025
- Published by Springer Nature in Research Square
Simulation-Based Reservoir Analysis Assisted by Chemical Tracers Transport for the Development of Enhanced Oil Recovery Strategies
Understanding subsurface fluid flow behavior is essential for optimizing enhanced oil recovery (EOR) strategies in petroleum reservoirs. This study presents a comprehensive tracer-based diagnostic approach combining both aqueous- and gas-phase tracers to characterize pre-EOR water and gas movement in a synthetic reservoir model. Methanol, a conservative aqueous-phase tracer, and perfluoromethylcyclopentane (PMCP), an inert gas tracer, were employed in two separate simulations using the commercial software reservoir simulator. In the water-phase tracer study, methanol was injected to assess water flow dynamics. Tracer recovery ranged from 20% to 29% across four production wells, with water velocities between 0.35 and 0.41 m/d. Breakthrough times varied from 3092 to 4247 days, and mean residence times were estimated between 3900 and 4810 days. The calculated swept pore volume ranged from 5.01×10 6 to 7.97×10 6 m³. Production Well-2 showed the highest recovery and swept volume, indicating a stronger hydraulic connection with the injection well and making it a suitable candidate for targeted EOR operations. In the gas-phase tracer simulation, PMCP was injected into a gas injection well to evaluate gas flow behavior. Tracer concentration-time curves obtained from four production wells revealed that Production Well-1 exhibited the highest tracer recovery of 38% and the shortest breakthrough time of 796 days, signifying a direct flow path and strong connectivity. Conversely, other wells showed longer residence times up to 1736 days and lower recoveries between 19% and 21%, indicating more complex flow paths and lower sweep efficiency. Differences in swept pore volume among wells underscored the impact of reservoir heterogeneity on gas movement and distribution. The combined results demonstrate the utility of integrating conservative aqueous and inert gas tracers for detailed reservoir characterization. Such dual-phase tracer diagnostics enable identification of preferential flow paths, unswept zones, and inter-well connectivity, thereby facilitating more effective EOR planning and improved reservoir management.
- 7 November 2025
- Published by Springer Nature in Research Square
Open AccessSimulation-Based Reservoir Analysis Assisted by Chemical Tracers Transport for the Development of Enhanced Oil Recovery Strategies
Understanding subsurface fluid flow behavior is essential for optimizing enhanced oil recovery (EOR) strategies in petroleum reservoirs. This study presents a comprehensive tracer-based diagnostic approach combining both aqueous- and gas-phase tracers to characterize pre-EOR water and gas movement in a synthetic reservoir model. Methanol, a conservative aqueous-phase tracer, and perfluoromethylcyclopentane (PMCP), an inert gas tracer, were employed in two separate simulations using the commercial software reservoir simulator. In the water-phase tracer study, methanol was injected to assess water flow dynamics. Tracer recovery ranged from 20% to 29% across four production wells, with water velocities between 0.35 and 0.41 m/d. Breakthrough times varied from 3092 to 4247 days, and mean residence times were estimated between 3900 and 4810 days. The calculated swept pore volume ranged from 5.01×10 6 to 7.97×10 6 m³. Production Well-2 showed the highest recovery and swept volume, indicating a stronger hydraulic connection with the injection well and making it a suitable candidate for targeted EOR operations. In the gas-phase tracer simulation, PMCP was injected into a gas injection well to evaluate gas flow behavior. Tracer concentration-time curves obtained from four production wells revealed that Production Well-1 exhibited the highest tracer recovery of 38% and the shortest breakthrough time of 796 days, signifying a direct flow path and strong connectivity. Conversely, other wells showed longer residence times up to 1736 days and lower recoveries between 19% and 21%, indicating more complex flow paths and lower sweep efficiency. Differences in swept pore volume among wells underscored the impact of reservoir heterogeneity on gas movement and distribution. The combined results demonstrate the utility of integrating conservative aqueous and inert gas tracers for detailed reservoir characterization. Such dual-phase tracer diagnostics enable identification of preferential flow paths, unswept zones, and inter-well connectivity, thereby facilitating more effective EOR planning and improved reservoir management.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
An Automatic Impedance Matching Network Based on Neural Network Technique for Inductive RF Plasma Source
A novel adaptive matching network system is proposed in this paper which utilizes an efficient neural network to match the RF power generator with the Inductively coupled plasma source (ICP) automatically. The proposed method utilizes a multi-perceptron neural network with a Bayesian regularization optimization algorithm to identify the impedance of the plasma without measuring the phase of the load. This advantage eliminates extra components of the conventional methods for measuring the phase which improves the design complexity, noise, and cost of the matching network. A data set from the performance mechanism of the proposed impedance matching network is extracted to analyze the system performance, and a multi-perceptron neural network is developed to determine the load impedance. Based on simulations and measurement results, the proposed system can automatically match the RF source to the desired load with less than -10 dB return loss. The success rate of achieving this rate of matching quality is more than 84%.
- 3 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-9
An Automatic Impedance Matching Network Based on Neural Network Technique for Inductive RF Plasma Source
A novel adaptive matching network system is proposed in this paper which utilizes an efficient neural network to match the RF power generator with the Inductively coupled plasma source (ICP) automatically. The proposed method utilizes a multi-perceptron neural network with a Bayesian regularization optimization algorithm to identify the impedance of the plasma without measuring the phase of the load. This advantage eliminates extra components of the conventional methods for measuring the phase which improves the design complexity, noise, and cost of the matching network. A data set from the performance mechanism of the proposed impedance matching network is extracted to analyze the system performance, and a multi-perceptron neural network is developed to determine the load impedance. Based on simulations and measurement results, the proposed system can automatically match the RF source to the desired load with less than -10 dB return loss. The success rate of achieving this rate of matching quality is more than 84%.
- Open Access
- 9 February 2025
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 140 (2) , 1-12
Enhanced gamma-ray spectrum transformation: NaI(Tl) scintillator to HPGe semiconductor via machine learning
Thallium-activated sodium iodide scintillation (NaI(Tl)) and high-purity germanium semiconductor (HPGe) detectors are two commonly employed gamma spectroscopy devices. NaI(Tl) detectors are preferred for their cost-effectiveness, efficiency, and ease of construction, while HPGe detectors have superior resolution but face challenges in temperature operation and they are expensive. This article investigates the application of machine learning algorithms, specifically K-Nearest Neighbors (KNN) and a Multi-Channel Output Regression based on Support Vector Regression (MCO-SVR), to enhance the performance of NaI(Tl) detectors by transforming its gamma spectrum into HPGe spectrum. The model was trained using datasets generated from a limited radioisotope library and demonstrated excellent performance across a diverse range of measured experimental test data. The evaluation included various scenarios, such as low-count spectra and background effects. The KNN model exhibited optimal performance, achieving an accuracy of 98.69% with a Manhattan distance metric. In contrast, the MCO-SVR model, employing both direct and chained approaches, exhibited varied results with different kernel types, with the polynomial kernel in the direct approach yielding the value 97.45% accuracy. Overall, the results indicate that machine learning algorithms have the potential to improve the performance of NaI(Tl) detectors and expand their applications in various fields of nuclear security. Graphical Abstract
- 9 February 2025
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 140 (2) , 1-12
Open AccessEnhanced gamma-ray spectrum transformation: NaI(Tl) scintillator to HPGe semiconductor via machine learning
Thallium-activated sodium iodide scintillation (NaI(Tl)) and high-purity germanium semiconductor (HPGe) detectors are two commonly employed gamma spectroscopy devices. NaI(Tl) detectors are preferred for their cost-effectiveness, efficiency, and ease of construction, while HPGe detectors have superior resolution but face challenges in temperature operation and they are expensive. This article investigates the application of machine learning algorithms, specifically K-Nearest Neighbors (KNN) and a Multi-Channel Output Regression based on Support Vector Regression (MCO-SVR), to enhance the performance of NaI(Tl) detectors by transforming its gamma spectrum into HPGe spectrum. The model was trained using datasets generated from a limited radioisotope library and demonstrated excellent performance across a diverse range of measured experimental test data. The evaluation included various scenarios, such as low-count spectra and background effects. The KNN model exhibited optimal performance, achieving an accuracy of 98.69% with a Manhattan distance metric. In contrast, the MCO-SVR model, employing both direct and chained approaches, exhibited varied results with different kernel types, with the polynomial kernel in the direct approach yielding the value 97.45% accuracy. Overall, the results indicate that machine learning algorithms have the potential to improve the performance of NaI(Tl) detectors and expand their applications in various fields of nuclear security. Graphical Abstract
- Open Access
- 7 November 2024
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 111, 107145
Effect of mechanical stirring on sonoluminescence and sonochemiluminescence
- 7 November 2024
- Published by Elsevier in Ultrasonics Sonochemistry
- Vol. 111, 107145
Open AccessEffect of mechanical stirring on sonoluminescence and sonochemiluminescence
- Open Access
- 21 September 2024
- Published by SCI AND TECH UNIVERSAL INC in Journal of Nuclear Research and Applications
- Vol. 4 (3) , 56-67
Achieving High Resolution Gamma-Ray Spectra Using Spectrum Data Obtained from NaI(Tl) Detector by Multi-Output Regressor-Chain Structure based on SVR
This paper proposes a novel approach for generating high-resolution energy spectra using cost-effective Sodium iodide Thallium activated (NaI(Tl)) detectors. It employ a multi-output regression chain structure based on support vector regression (SVR) to map NaI(Tl) spectra to their corresponding HPGe spectra. The suggested framework utilizes a regression chain strategy to enhance regression models that lack support for multi-output regression. This involves initially employing one regressor for each energy channel of the HPGe spectrum. Subsequently, multiple regressors are integrated to forecast all energy channels of HPGe spectrum. Each regressor in the chain receives the entire NaI spectrum as input. Then, for each subsequent regressor, input is further augmented by concatenating the outputs of all preceding regressors in the chain. Despite being trained on a limited radioisotope library, the model exhibits exceptional performance across diverse measured test spectra containing multiple radioisotopes. Among the various kernel functions employed (linear, radial basis function (RBF), and polynomial), the RBF and polynomial kernels yielded superior performance compared to the linear kernel. By enabling HPGe spectrum prediction using NaI(Tl) detectors, this study highlights a significant advancement in radiation detection capabilities, addressing cost and operational considerations.
- 21 September 2024
- Published by SCI AND TECH UNIVERSAL INC in Journal of Nuclear Research and Applications
- Vol. 4 (3) , 56-67
Open AccessAchieving High Resolution Gamma-Ray Spectra Using Spectrum Data Obtained from NaI(Tl) Detector by Multi-Output Regressor-Chain Structure based on SVR
This paper proposes a novel approach for generating high-resolution energy spectra using cost-effective Sodium iodide Thallium activated (NaI(Tl)) detectors. It employ a multi-output regression chain structure based on support vector regression (SVR) to map NaI(Tl) spectra to their corresponding HPGe spectra. The suggested framework utilizes a regression chain strategy to enhance regression models that lack support for multi-output regression. This involves initially employing one regressor for each energy channel of the HPGe spectrum. Subsequently, multiple regressors are integrated to forecast all energy channels of HPGe spectrum. Each regressor in the chain receives the entire NaI spectrum as input. Then, for each subsequent regressor, input is further augmented by concatenating the outputs of all preceding regressors in the chain. Despite being trained on a limited radioisotope library, the model exhibits exceptional performance across diverse measured test spectra containing multiple radioisotopes. Among the various kernel functions employed (linear, radial basis function (RBF), and polynomial), the RBF and polynomial kernels yielded superior performance compared to the linear kernel. By enabling HPGe spectrum prediction using NaI(Tl) detectors, this study highlights a significant advancement in radiation detection capabilities, addressing cost and operational considerations.
- 17 June 2024
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 182 (12) , 5157-5173
Compact Beta-Gamma Radioxenon Detection System with Improved Energy Resolution Using PIPS Detector
- 17 June 2024
- Published by Springer Nature in Pure and Applied Geophysics
- Vol. 182 (12) , 5157-5173
Compact Beta-Gamma Radioxenon Detection System with Improved Energy Resolution Using PIPS Detector
- Open Access
- 11 June 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (10) , 4355-4364
Innovative projection acquisition algorithm for optimizing portable LNDCT in oil and gas pipeline imaging
- 11 June 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 56 (10) , 4355-4364
Open AccessInnovative projection acquisition algorithm for optimizing portable LNDCT in oil and gas pipeline imaging