Jie Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jie Jiang has a total of 169 co-authors. Here are the top co-authors by number of shared publications:
- Jian Shi
Department of Materials Science and Engineering Rensselaer Polytechnic Institute Troy New York USA
11 shared publications Lifu Zhang
Wuhan National High Magnetic Field Center and School of Physics Huazhong University of Science and Technology Wuhan China
11 shared publications- Liping Zhu
Zhejiang University
9 shared publications - Zhizhen Ye
Zhejiang University
9 shared publications Hanwen Chi
Zhejiang University
7 shared publicationsKaixin Wang
Zhejiang University
7 shared publications
Latest Publications
Reconfigurable Bulk Photovoltaics via Strain‐Gradient‐Induced Polar Reconstruction in a van der Waals Antiferroelectric
Strain gradients can induce flexoelectric polarization and activate bulk photovoltaic signals, but the response is usually locked to the localized flexoelectric polarization or intrinsic symmetry, limiting its reconfigurability. Van der Waals antiferroelectrics provide a distinct route: strain gradients can reconstruct inversion symmetry and polar evolution via interlayer sliding, converting a centrosymmetric parent crystal into a polar platform with a writable order parameter. Here, we demonstrate strain‐gradient‐induced interlayer sliding and polar reconstruction in flexural GeSe, and its direct transduction into reconfigurable bulk photovoltaic output. Correlative Raman/second‐harmonic generation mapping and vector piezoresponse force microscopy reveal strain‐gradient‐induced symmetry breaking and an armchair‐aligned polarization with asymmetric, direction‐selective switching under lateral poling. Photocurrent mapping and polarization‐resolved measurements identify a symmetry‐allowed bulk photovoltaic current along the polar axis, whose magnitude is spatially programmable, increasing by over two orders of magnitude after polar reconstruction induced within the coupling of effective flexoelectric bias and ferroic order parameter. These results establish a general symmetry‐on‐demand strategy to program nonlinear photovoltaics in centrosymmetric van der Waals antiferroelectrics.
Reconfigurable Bulk Photovoltaics via Strain‐Gradient‐Induced Polar Reconstruction in a van der Waals Antiferroelectric
Strain gradients can induce flexoelectric polarization and activate bulk photovoltaic signals, but the response is usually locked to the localized flexoelectric polarization or intrinsic symmetry, limiting its reconfigurability. Van der Waals antiferroelectrics provide a distinct route: strain gradients can reconstruct inversion symmetry and polar evolution via interlayer sliding, converting a centrosymmetric parent crystal into a polar platform with a writable order parameter. Here, we demonstrate strain‐gradient‐induced interlayer sliding and polar reconstruction in flexural GeSe, and its direct transduction into reconfigurable bulk photovoltaic output. Correlative Raman/second‐harmonic generation mapping and vector piezoresponse force microscopy reveal strain‐gradient‐induced symmetry breaking and an armchair‐aligned polarization with asymmetric, direction‐selective switching under lateral poling. Photocurrent mapping and polarization‐resolved measurements identify a symmetry‐allowed bulk photovoltaic current along the polar axis, whose magnitude is spatially programmable, increasing by over two orders of magnitude after polar reconstruction induced within the coupling of effective flexoelectric bias and ferroic order parameter. These results establish a general symmetry‐on‐demand strategy to program nonlinear photovoltaics in centrosymmetric van der Waals antiferroelectrics.
- 31 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (44) , 15497-15506
Atomic Lift-Off of Wafer-Scale Single-Crystalline Gold Membranes Enables Buried-Interface Epitaxy for Flexible Oxide Electronics
Flexible oxide electronics require inorganic semiconductors that maintain high-performance under bending, yet scalable approaches to wafer-scale single-crystalline (SC) oxide films and, critically, atomically sharp metal/oxide contacts remain limited. Here, we introduce a buried-interface epitaxy strategy based on atomic lift-off of epitaxial metal films to create atomically defined SC metal/oxide heterostructures in flexible architectures. We fabricate 2-in. freestanding SC Au(111) membranes and employ film-flipping to expose the originally buried Au/Si epitaxial interface as an intrinsically atomically flat growth surface. This converts conventional surface deposition into interface deposition, enabling wafer-scale epitaxial Cu2O(111)/Au with a flat interface. The interface-deposited flexible Cu2O exhibits nearly 2-fold higher carrier mobility and photocurrent, while maintaining stable transport under bending. Flexible Cu2O photocathodes further exhibit 1.6 times higher full-angle light harvesting and 5.6 times higher photocurrent-to-mass metrics compared with rigid counterparts. This work establishes freestanding SC metals as transferable epitaxial templates for flexible oxide electronics and energy devices.
- 31 October 2026
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 26 (44) , 15497-15506
Atomic Lift-Off of Wafer-Scale Single-Crystalline Gold Membranes Enables Buried-Interface Epitaxy for Flexible Oxide Electronics
Flexible oxide electronics require inorganic semiconductors that maintain high-performance under bending, yet scalable approaches to wafer-scale single-crystalline (SC) oxide films and, critically, atomically sharp metal/oxide contacts remain limited. Here, we introduce a buried-interface epitaxy strategy based on atomic lift-off of epitaxial metal films to create atomically defined SC metal/oxide heterostructures in flexible architectures. We fabricate 2-in. freestanding SC Au(111) membranes and employ film-flipping to expose the originally buried Au/Si epitaxial interface as an intrinsically atomically flat growth surface. This converts conventional surface deposition into interface deposition, enabling wafer-scale epitaxial Cu2O(111)/Au with a flat interface. The interface-deposited flexible Cu2O exhibits nearly 2-fold higher carrier mobility and photocurrent, while maintaining stable transport under bending. Flexible Cu2O photocathodes further exhibit 1.6 times higher full-angle light harvesting and 5.6 times higher photocurrent-to-mass metrics compared with rigid counterparts. This work establishes freestanding SC metals as transferable epitaxial templates for flexible oxide electronics and energy devices.
- Open Access
- 14 August 2026
- Published by Elsevier in SSRN Electronic Journal
Phase-Evolved Black TiO2 for Atmosphere-Adaptive Hydrogen Sensing
Hydrogen sensing in practical energy systems often occurs under oxygen-variable conditions, where conventional oxygen-mediated sensing mechanisms become insufficient. Here, we report a phase-evolution-guided defect-engineering strategy for Pd/black TiO2 hydrogen sensors. Controlled H2 annealing drives electrospun TiO2 nanofibers from rutile TiO2 toward Ti9O17-related reduced titanium oxides, enabling systematic modulation of oxygen deficiency, Pd interfacial chemistry, electronic structure and hydrogen sensing behavior. The optimized intermediate reduction state delivers a four-orders-of-magnitude enhancement in H2 response in air, an operating temperature of 70 °C and a lowest tested concentration of 20 parts per billion (ppb), while retaining effective detection in N2 and transformer insulating oil. Structural, spectroscopic and theoretical analyses reveal atmosphere-dependent sensing pathways. In air, Pd-assisted H2 dissociation and spillover are coupled with oxygen-mediated surface oxidation. In N2, vacancy-assisted hydrogen accommodation, Ti-H/H-VO-like defect complexes and Ti 3d-state reconstruction dominate charge transport. This work establishes defect-driven phase evolution as a materials design principle for atmosphere-adaptive hydrogen sensors and highlights titanium suboxide formation as an active route for regulating hydrogen adsorption, interfacial charge transfer and sensing behavior beyond conventional air-based operation.
- 14 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPhase-Evolved Black TiO2 for Atmosphere-Adaptive Hydrogen Sensing
Hydrogen sensing in practical energy systems often occurs under oxygen-variable conditions, where conventional oxygen-mediated sensing mechanisms become insufficient. Here, we report a phase-evolution-guided defect-engineering strategy for Pd/black TiO2 hydrogen sensors. Controlled H2 annealing drives electrospun TiO2 nanofibers from rutile TiO2 toward Ti9O17-related reduced titanium oxides, enabling systematic modulation of oxygen deficiency, Pd interfacial chemistry, electronic structure and hydrogen sensing behavior. The optimized intermediate reduction state delivers a four-orders-of-magnitude enhancement in H2 response in air, an operating temperature of 70 °C and a lowest tested concentration of 20 parts per billion (ppb), while retaining effective detection in N2 and transformer insulating oil. Structural, spectroscopic and theoretical analyses reveal atmosphere-dependent sensing pathways. In air, Pd-assisted H2 dissociation and spillover are coupled with oxygen-mediated surface oxidation. In N2, vacancy-assisted hydrogen accommodation, Ti-H/H-VO-like defect complexes and Ti 3d-state reconstruction dominate charge transport. This work establishes defect-driven phase evolution as a materials design principle for atmosphere-adaptive hydrogen sensors and highlights titanium suboxide formation as an active route for regulating hydrogen adsorption, interfacial charge transfer and sensing behavior beyond conventional air-based operation.
Space‐Confinement Epitaxy of Single‐Crystalline V 2 O 5 Nanowire Arrays for High‐Performance and Flexible Hydrogen Sensing
Oxide nanostructures hold great promise for next‐generation gas‐sensing technologies owing to their chemical stability, rich surface chemistry, and tunable electronic properties. However, controlled epitaxial growth of oxide nanostructures remains challenging, particularly for V 2 O 5 , a highly promising material for hydrogen detection. Here, we develop a space‐confinement chemical vapor deposition strategy that enables epitaxial growth of highly ordered V 2 O 5 nanowire arrays on r‐Al 2 O 3 substrates. The confined geometry precisely regulates gas‐phase transport and surface reaction kinetics, allowing morphology control via confinement distance and yielding single‐crystalline nanowires with atomically sharp interfaces. Upon Pd decoration, V 2 O 5 nanowire array sensors demonstrate remarkable hydrogen‐sensing performance, featuring high sensitivity, low optimal operating temperatures down to room temperature, and rapid response/recovery dynamics. Moreover, flexible single‐nanowire sensors maintain stable performance under repeated mechanical deformation. This work provides fundamental insight into space‐confinement epitaxy of nanostructures and establishes a scalable route toward flexible, low‐power, and high‐performance gas sensors for future wearable and intelligent environmental monitoring technologies.
Space‐Confinement Epitaxy of Single‐Crystalline V 2 O 5 Nanowire Arrays for High‐Performance and Flexible Hydrogen Sensing
Oxide nanostructures hold great promise for next‐generation gas‐sensing technologies owing to their chemical stability, rich surface chemistry, and tunable electronic properties. However, controlled epitaxial growth of oxide nanostructures remains challenging, particularly for V 2 O 5 , a highly promising material for hydrogen detection. Here, we develop a space‐confinement chemical vapor deposition strategy that enables epitaxial growth of highly ordered V 2 O 5 nanowire arrays on r‐Al 2 O 3 substrates. The confined geometry precisely regulates gas‐phase transport and surface reaction kinetics, allowing morphology control via confinement distance and yielding single‐crystalline nanowires with atomically sharp interfaces. Upon Pd decoration, V 2 O 5 nanowire array sensors demonstrate remarkable hydrogen‐sensing performance, featuring high sensitivity, low optimal operating temperatures down to room temperature, and rapid response/recovery dynamics. Moreover, flexible single‐nanowire sensors maintain stable performance under repeated mechanical deformation. This work provides fundamental insight into space‐confinement epitaxy of nanostructures and establishes a scalable route toward flexible, low‐power, and high‐performance gas sensors for future wearable and intelligent environmental monitoring technologies.
- Open Access
- 27 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Phase-independent wireless data aggregation via optical in-sensor computing
- 27 July 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessPhase-independent wireless data aggregation via optical in-sensor computing
- Open Access
- 22 May 2026
- Published by Wiley in Advanced Science
- Vol. 13 (36) , e75781
Imaging Electric Polarization Switching in Multilayer Graphene
Fundamentally distinct from the conventional ferroelectrics, the most discriminative hallmark of the emerging 2D sliding ferroelectricity is the polarization switching via the domain wall (DW) sliding. Meanwhile, multilayer graphene has recently attracted immense research attention owing to engineerable strong electron correlation and non‐trivial band topology. Here, domain wall sliding‐induced electric polarization switching is directly observed for the first time in multilayer graphene. We identify adjacent polar domains of opposite electric polarizations in tetralayer graphene, the thinnest natural graphene polytype with broken inversion and mirror symmetries, by a gate‐tunable nanoscale optical imaging technique. Remarkably, we directly observe and realize the DW sliding‐induced polarization switching between these polar domains upon application of global and local electric fields and mechanical forces. Our combined experiment and theory find a single DW sliding at the middlemost interface is responsible for the polarization switching. Our work opens new opportunities in studying sliding ferroelectricity in multilayer graphene, and demonstrates a novel optical readout method for sensitively and directly detecting electric polarization in 2D materials.
- 22 May 2026
- Published by Wiley in Advanced Science
- Vol. 13 (36) , e75781
Open AccessImaging Electric Polarization Switching in Multilayer Graphene
Fundamentally distinct from the conventional ferroelectrics, the most discriminative hallmark of the emerging 2D sliding ferroelectricity is the polarization switching via the domain wall (DW) sliding. Meanwhile, multilayer graphene has recently attracted immense research attention owing to engineerable strong electron correlation and non‐trivial band topology. Here, domain wall sliding‐induced electric polarization switching is directly observed for the first time in multilayer graphene. We identify adjacent polar domains of opposite electric polarizations in tetralayer graphene, the thinnest natural graphene polytype with broken inversion and mirror symmetries, by a gate‐tunable nanoscale optical imaging technique. Remarkably, we directly observe and realize the DW sliding‐induced polarization switching between these polar domains upon application of global and local electric fields and mechanical forces. Our combined experiment and theory find a single DW sliding at the middlemost interface is responsible for the polarization switching. Our work opens new opportunities in studying sliding ferroelectricity in multilayer graphene, and demonstrates a novel optical readout method for sensitively and directly detecting electric polarization in 2D materials.
- 27 April 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (2)
Epitaxial lift-off of halide perovskites
Epitaxial halide perovskites have emerged as a new frontier for high-performance optoelectronics owing to their exceptional crystallinity, long carrier diffusion lengths, and orientation-dependent electronic properties. However, their growth on rigid and often insulating single-crystal substrates severely limits device architectures and precludes integration with flexible, conductive, or heterogeneous platforms. This review systematically summarizes recent advances in epitaxial growth and corresponding lift-off strategies of halide perovskites. We first discuss three representative epitaxial modes—chemical epitaxy, van der Waals epitaxy, and remote epitaxy—highlighting their distinct interfacial bonding mechanisms and resulting film characteristics. We then examine corresponding lift-off techniques, including direct mechanical, two-dimensional interlayer-assisted, and mask-assisted lift-off, emphasizing their applicability, film quality, and scalability. Finally, we summarize recent advances in photodetectors, micro-light-emitting diodes, and solar cells enabled by transferred epitaxial films, underscoring their improved efficiency, stability, and mechanical flexibility. We conclude by outlining key challenges and future opportunities for scalable, damage-free exfoliation and heterogeneous integration. This review aims to provide a roadmap for advancing epitaxial lift-off toward practical, high-performance halide perovskite optoelectronic technologies.
- 27 April 2026
- Published by AIP Publishing in Applied Physics Reviews
- Vol. 13 (2)
Epitaxial lift-off of halide perovskites
Epitaxial halide perovskites have emerged as a new frontier for high-performance optoelectronics owing to their exceptional crystallinity, long carrier diffusion lengths, and orientation-dependent electronic properties. However, their growth on rigid and often insulating single-crystal substrates severely limits device architectures and precludes integration with flexible, conductive, or heterogeneous platforms. This review systematically summarizes recent advances in epitaxial growth and corresponding lift-off strategies of halide perovskites. We first discuss three representative epitaxial modes—chemical epitaxy, van der Waals epitaxy, and remote epitaxy—highlighting their distinct interfacial bonding mechanisms and resulting film characteristics. We then examine corresponding lift-off techniques, including direct mechanical, two-dimensional interlayer-assisted, and mask-assisted lift-off, emphasizing their applicability, film quality, and scalability. Finally, we summarize recent advances in photodetectors, micro-light-emitting diodes, and solar cells enabled by transferred epitaxial films, underscoring their improved efficiency, stability, and mechanical flexibility. We conclude by outlining key challenges and future opportunities for scalable, damage-free exfoliation and heterogeneous integration. This review aims to provide a roadmap for advancing epitaxial lift-off toward practical, high-performance halide perovskite optoelectronic technologies.
- 3 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5133-5143
Growth-Mode Engineering of Epitaxial TiO 2 Thin Films for Room-Temperature Hydrogen Sensing and Battery Safety
Achieving reliable hydrogen sensing at room temperature remains a critical challenge due to the limited carrier transport and unstable surface chemistry of conventional polycrystalline oxides. Here, we demonstrate that precise growth-mode control of epitaxial anatase TiO2 thin films via sputtering atmosphere engineering provides an effective route to overcoming these limitations. By systematically tuning the Ar/O2 ratio, the TiO2 growth mode transitions from a defective island-like mode to a layer-by-layer mode and finally to a stress-induced island. The film deposited at an 8/1 Ar/O2 ratio achieves an ideal combination of perfect crystallinity, an atomically flat surface, and a balanced oxygen vacancy concentration, yielding a clean and well-defined Pd-TiO2 interface upon catalyst deposition. The resulting Pd/TiO2 sensor exhibits exceptional room-temperature hydrogen sensing performance: a strong response of 11.34 to 100 ppm of H2, a low detection limit (5 ppm), excellent selectivity over other battery abuse gases, remarkable humidity resistance, and long-term stability. Comprehensive structural and mechanistic analyses reveal that the superior performance originates from an efficient interface-dominated sensing mechanism, rather than the conventional surface reaction pathway. This work establishes a "structure over stoichiometry" paradigm for developing advanced gas sensors and provides an effective route toward high-reliability, low-power hydrogen safety monitoring.
- 3 February 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (6) , 5133-5143
Growth-Mode Engineering of Epitaxial TiO 2 Thin Films for Room-Temperature Hydrogen Sensing and Battery Safety
Achieving reliable hydrogen sensing at room temperature remains a critical challenge due to the limited carrier transport and unstable surface chemistry of conventional polycrystalline oxides. Here, we demonstrate that precise growth-mode control of epitaxial anatase TiO2 thin films via sputtering atmosphere engineering provides an effective route to overcoming these limitations. By systematically tuning the Ar/O2 ratio, the TiO2 growth mode transitions from a defective island-like mode to a layer-by-layer mode and finally to a stress-induced island. The film deposited at an 8/1 Ar/O2 ratio achieves an ideal combination of perfect crystallinity, an atomically flat surface, and a balanced oxygen vacancy concentration, yielding a clean and well-defined Pd-TiO2 interface upon catalyst deposition. The resulting Pd/TiO2 sensor exhibits exceptional room-temperature hydrogen sensing performance: a strong response of 11.34 to 100 ppm of H2, a low detection limit (5 ppm), excellent selectivity over other battery abuse gases, remarkable humidity resistance, and long-term stability. Comprehensive structural and mechanistic analyses reveal that the superior performance originates from an efficient interface-dominated sensing mechanism, rather than the conventional surface reaction pathway. This work establishes a "structure over stoichiometry" paradigm for developing advanced gas sensors and provides an effective route toward high-reliability, low-power hydrogen safety monitoring.
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (13) , 9175-9187
A High-Performance Sb2S3–Based Photocathode with rGO and TiO2/Pt for Photoelectrochemical Water Splitting
- 18 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (13) , 9175-9187
A High-Performance Sb2S3–Based Photocathode with rGO and TiO2/Pt for Photoelectrochemical Water Splitting