PBPascal Besnard

Pascal Besnard

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Pascal Besnard has a total of 362 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shock velocity measurement inside high density polyethylene using mid-infrared photonic Doppler velocimetry

    by G. Lefrère, E. Kaeshammer, A. Lefrançois, J.-M. Goujon, L. Poffo, R. Le Page, P. Besnard, Y. Barbarin

    Measuring shockwave velocity within a material is often beyond the capability of conventional photonic Doppler velocimetry (PDV) due to material opacity. This paper presents an experimental demonstration of shockwave measurement within high density polyethylene (HDPE) using a free-space photonic Doppler velocimeter operating in the 9–11 μm range (mid-infrared, Mid-IR). The shockwave is generated in HDPE by running a plate impact experiment with a gas launcher, inducing a refractive index change at the wave interface within the HDPE, and enabling partial reflection of the beam. The Mid-IR system is connected to the target by a hollow core fiber, which captures the reflected Mid-IR signal for velocity measurement. We measure the shock velocity within HDPE at 2600 m/s and record the beginning of particle velocity through the shocked HDPE near 500 m/s. A numerical simulation with OURANOS hydrocode shows good agreement with experimental results, despite edge effects and unperfected equation of state. These results confirm that Mid-IR PDV is an ideal candidate for material characterization under more extreme conditions such as detonation in energetic materials.

  • Open Access

    Hz-level intrinsic linewidth Brillouin fiber laser in the visible range

    by Georges Perin, Edgar Casta, Kavyasree Anilkumar, Pascal Besnard, Stéphane Trebaol

    We report on the development and characterization of a compact visible Brillouin fiber laser. The laser is designed in a short cavity configuration and demonstrates an output power of 30 mW. Detailed analysis reveals an intrinsic linewidth of 6 Hz, indicating exceptional spectral purity. Comprehensive gain characterization was performed as a function of pump power, providing critical insight into the laser’s performance and limitations. These findings contribute to the advancement of compact, highly stable visible fiber lasers for quantum technologies and microwave photonics.


  • Modeling of Brillouin-Assisted Self-Narrowed Photonic Oscillator Including an Optical Phase-Locked Loop

    by Romain Agaisse, Gwennaël Danion, Marc Vallet, Pascal Besnard, Mehdi Alouini

    We propose a theoretical description and experimental validation of a frequency self-stabilized photonic oscillator. This photonic oscillator which relies on a solid-state laser and a nonreciprocal Brillouin fiber resonator (BFR) arranged in an optical phase-locked loop (OPLL) was recently shown to provide very narrow linewidth in the Hz range. Special attention is given to end up with analytical expressions relying on coupled-mode formalism, of the BFR dynamics in which the non-resonant configuration for the pump has to be addressed. Furthermore, the transfer function of the full system is derived from the response of each component within the OPLL leading to two interleaved loops, relative to the phase and to the amplitude fluctuations of the optical field. An experimental setup including a solid-state Er:Yb laser is detailed and used to test the model predictions, both for phase noise level and response time. This model opens the way to the optimization of this new type of photonic oscillator which can be adapted to any kind of pump laser.

  • Mid-infrared speckle reduction technique for hyperspectral imaging

    by Maroun Hjeij, Luiz Poffo, Bastien Billiot, Ronan Le Page, Pascal Besnard, Jean-Marc Goujon

    Recently, we proposed an active mid-infrared (MIR) hyperspectral imaging system for early detection of plant water stress. A quantum cascade tunable laser powered this stand-off detection system, in which “speckle” in images due to coherent nature of laser radiation. The speckle affects the spatial resolution of the images. In this article, we evaluate several speckle suppression methods suitable for the mid-infrared region. To quantify the reduction of speckle, we compare their spatial contrast. We combined optical techniques and showed their ability to reduce the speckle contrast from its initial value 0.413 down to 0.11, representing a 73% reduction


  • Compact fiber-ring resonator for blue external cavity diode laser stabilization

    by Georges Perin, Dominique Mammez, Antoine Congar, Pascal Besnard, Karim Manamanni, Vincent Roncin, Frédéric Du Burck, Stéphane Trebaol

    We demonstrate a compact and low-cost all-fiber-based locking setup for frequency-noise suppression of a 420 nm external-cavity diode laser. Frequency noise reduction in the 100 Hz to 800 kHz range is demonstrated up to 40 dB associated with a linewidth narrowing from 850 kHz to 20 kHz for 10 ms integration time. This simple locking scheme might be implemented for a large range of wavelengths and can be integrated on a small footprint for embedded applications requiring narrow linewidth blue laser diodes.


  • Narrow linewidth near-UV InGaN laser diode based on external cavity fiber Bragg grating

    by Antoine Congar, Mathilde Gay, Georges Perin, Dominique Mammez, Jean-Claude Simon, Pascal Besnard, Julien Rouvillain, Thierry Georges, Laurent Lablonde, Thierry Robin, et al.

    We realize a fiber Bragg grating InGaN-based laser diode emitting at 400 nm and demonstrate its high coherency. Thanks to the fabrication of a narrowband fiber Bragg grating in the near-UV, we can reach single-mode and single-frequency regimes for the self-injection locked diode. The device exhibits 44 dB side-mode suppression ratio and mW output power. Detailed frequency noise analysis reveals sub-MHz integrated linewidth and 16 kHz intrinsic linewidth. Such a narrow linewidth laser diode in the near-UV domain with a compact and low-cost design could find applications whenever coherency and interferometric resolutions are needed.


  • Open Access

    Intracavity Brillouin gain characterization based on cavity ringdown spectroscopy

    by Ananthu Sebastian, Stéphane Trebaol, Pascal Besnard

    We report a technique based upon the cavity ringdown method that enables the characterization of the Brillouin gain coefficient directly in a laser cavity. Material gain, optical cavity parameters, and lasing properties can be extracted from measurements within a single experiment.


  • Active Hyperspectral Mid-Infrared Imaging Based on Widely Tunable QCL Laser

    by Chaimae El Fakir, Luiz Poffo, Bastien Billiot, Pascal Besnard, Jean-Marc Goujon

    Thermal imaging and the recent availability of widely tunable infrared QCL lasers (Quantum Cascade Laser) allow us to propose an active hyperspectral imaging system operating in mid-infrared (MIR) band to obtain simultaneously large amounts of spatial and spectral information on the samples.In order to evaluate more precisely the capacities of the active hyperspectral imaging, we propose a system composed of four powerful QCL tunable lasers (in order to cover 3 – 5 μm and 7 – 11 μm wavelengths) and three cameras: a visible and near-infrared (NIR) range, a bolometer for 7 – 13 μm range and an InSb cooled camera for 3 – 5 μm range. We present the algorithm for image acquisition, image and data processing. Finally, we present and discuss some preliminary results using this system to characterize plant leaves under controlled growing conditions.


  • Open Access

    Narrow Linewidth InGaN Laser Diodes Based on External Cavity Fiber Bragg Grating

    by Mathilde Gay, Antoine Congar, Dominique Mammez, Laurent Lablonde, Raphael Butte, Nicolas Grandjean, Pascal Besnard, Stephane Trebaol

    The first InGaN-based LDs were reported in 1996 by Nakamura and co-workers [1] and commercialized from 1999 by the Nichia Corporation. Since then, huge efforts have been devoted to the optimization of the epitaxial layers (doping, defect concentration, shortening of the radiative lifetime, etc.). Nowadays, blue laser diodes emitting hundreds of mW are commercially available but they often exhibit multimode behaviors for both transverse and longitudinal directions. The InGaN-based laser diode technology is still in its infancy, compared to its long wavelength counterparts and only recently the first electrically pumped single mode blue laser diodes have been demonstrated [2] with a resolution limited linewidth of 11.7 GHz. At telecom wavelengths, a mature approach to force the laser diode in a single frequency regime consists in using an external feedback by means of Fiber Bragg Grating [3,4]. Nevertheless, to our knowledge, such a compact design has not been proposed for blue laser diodes yet.


  • Brillouin Gain Characterization by Cavity Ringdown Spectroscopy

    by Ananthu Sebastian, Stephane Trebaol, Pascal Besnard

    Nowadays, narrow linewidth lasers are unavoidable tools for fundamental and applied physics. One promising approach to generate coherent laser emission is based on stimulated Brillouin scattering (SBS) optical nonlinearity [1]. Implementing SBS in an optical cavity gives rise to coherent emission with impressive performances in terms of noise and linewidth [2]. Cascading the SBS process can even, under given conditions, improves the coherent emission specifications [3]. To achieve such performances it is crucial to determine the Brillouin gain coefficient. Usual pump-probe methods are carried out in single pass waveguides [4]. The probe intensity is proportional to e gBP in L eff / A eff where P in is the incident pump power, A eff the effective mode area and L eff the usual effective interaction length. To observe significant probe amplification one needs either long waveguides or strong pump power to reach the SBS threshold. We propose a method, based on the cavity ringdown spectroscopy, to directly characterize the Brillouin gain coefficient inside a resonator. This configuration allows to extract Brillouin parameters from the light recirculation with both a reduced waveguide length and input pump power when compared to usual methods.