Dongxing Kou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dongxing Kou has a total of 120 co-authors. Here are the top co-authors by number of shared publications:
- Sixin Wu
Key Lab for Special Functional Materials of Ministry of Education, National & Local Joint Engineering Research Center for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, Collaborative Innovation Center of Nano Functional Materials and Applications, Henan University, Kaifeng 475004, China
24 shared publications Wenhui Zhou
Key Lab for Special Functional Materials, Ministry of Education, National & Local Joint Engineering Research Center for High-Efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, Collaborative Innovation Center of Nano Functional Materials and Applications
18 shared publications- Yafang Qi
Key Laboratory for Special Functional Materials of MOE, National & Local Joint Engineering Research Centre for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, Henan University, Kaifeng 475004, Henan Province, China
17 shared publications - Zhengji Zhou
Key Lab for Special Functional Materials Ministry of Education National and Local Joint Engineering Research Center for High‐Efficiency Display and Lighting Technology School of Nanoscience and Materials Engineering Henan University Kaifeng China
17 shared publications - Wen-Hui Zhou
Key Laboratory for Special Functional Materials of MOE, National & Local Joint Engineering Research Centre for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, Henan University, Kaifeng 475004, Henan Province, China
16 shared publications Shengjie Yuan
Key Laboratory for Special Functional Materials of MOE, National & Local Joint Engineering Research Centre for High-efficiency Display and Lighting Technology, School of Nanoscience and Materials Engineering, Henan University, Kaifeng 475004, Henan Province, China
14 shared publications
Latest Publications
- Open Access
- 11 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Thermal-decoupled selenization enables kesterite solar cells with 15.3% certified efficiency
Cu2ZnSn(S,Se)4 kesterite solar cells, while promising for sustainable photovoltaics, are constrained by undefined crystallization kinetics during selenization, which introduces bilayer crystallization with detrimental horizontal grain boundaries, voids, and secondary phases. This work traces this issue to early-stage Se-driven reaction at the back interface, which forms a low-melting-point Cu(S,Se) phase and triggers uncontrolled reverse crystallization. To address this, we propose a thermal-decoupled selenization strategy that creates a vertical Se concentration gradient in the initial stage. This approach decouples Se supply from the Cu(S,Se) formation temperature range, thereby suppressing bilayer crystallization. Consequently, it enables the growth of top-down columnar grains, which enhance carrier transport and suppress recombination, achieving a champion power conversion efficiency of 15.7% (certified 15.3%) in the resultant devices. This approach offers critical insights into crystallization kinetics and is also applicable to solution-processed Cu(In,Ga)Se2 solar cells, highlighting its great significance for diverse copper-based chalcogenides.
- 11 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessThermal-decoupled selenization enables kesterite solar cells with 15.3% certified efficiency
Cu2ZnSn(S,Se)4 kesterite solar cells, while promising for sustainable photovoltaics, are constrained by undefined crystallization kinetics during selenization, which introduces bilayer crystallization with detrimental horizontal grain boundaries, voids, and secondary phases. This work traces this issue to early-stage Se-driven reaction at the back interface, which forms a low-melting-point Cu(S,Se) phase and triggers uncontrolled reverse crystallization. To address this, we propose a thermal-decoupled selenization strategy that creates a vertical Se concentration gradient in the initial stage. This approach decouples Se supply from the Cu(S,Se) formation temperature range, thereby suppressing bilayer crystallization. Consequently, it enables the growth of top-down columnar grains, which enhance carrier transport and suppress recombination, achieving a champion power conversion efficiency of 15.7% (certified 15.3%) in the resultant devices. This approach offers critical insights into crystallization kinetics and is also applicable to solution-processed Cu(In,Ga)Se2 solar cells, highlighting its great significance for diverse copper-based chalcogenides.
- 15 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (34) , e73392
Defect Passivation and Charge Transport Enhancement in High‐Voltage Cu 2 ZnSn(S,Se) 4 Solar Cells via MnS Interfacial Layer
The large open‐circuit voltage ( V OC ) deficit remains a central bottleneck in Cu 2 ZnSn(S,Se) 4 (CZTSSe) solar cells, originating from the coupled effects of uncontrolled MoSe 2 growth at the rear contact and defect‐mediated non‐radiative recombination in the absorber. Here, we report a defect‐selective back‐contact engineering strategy via a thermally oxidized MnS interlayer that simultaneously regulates interfacial reaction kinetics and defect energetics. The MnS interlayer suppresses excessive MoSe 2 formation and reduces the valence‐band offset from 0.32 to 0.10 eV, thereby promoting hole‐selective transport. Meanwhile, the junction quality is substantially improved, as evidenced by an expanded depletion width (236 to 286 nm), a reduced interfacial defect density (1.31 × 10 15 to 4.60 × 10 14 cm −3 ), and prolonged carrier lifetimes (1.20 to 2.48 and 99 to 208 µs, respectively). First‐principles calculations further reveal that Mn incorporation reconstructs defect formation energetics by suppressing deep Sn Zn antisites while favoring shallow acceptor‐type defects, thus mitigating Shockley–Read–Hall recombination and strengthening p‐type transport. Consequently, a V OC of 550.7 mV and an efficiency of 14.35% are achieved, representing the highest performance reported to date for Mn‐modified CZTSSe solar cells.
- 15 May 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (34) , e73392
Defect Passivation and Charge Transport Enhancement in High‐Voltage Cu 2 ZnSn(S,Se) 4 Solar Cells via MnS Interfacial Layer
The large open‐circuit voltage ( V OC ) deficit remains a central bottleneck in Cu 2 ZnSn(S,Se) 4 (CZTSSe) solar cells, originating from the coupled effects of uncontrolled MoSe 2 growth at the rear contact and defect‐mediated non‐radiative recombination in the absorber. Here, we report a defect‐selective back‐contact engineering strategy via a thermally oxidized MnS interlayer that simultaneously regulates interfacial reaction kinetics and defect energetics. The MnS interlayer suppresses excessive MoSe 2 formation and reduces the valence‐band offset from 0.32 to 0.10 eV, thereby promoting hole‐selective transport. Meanwhile, the junction quality is substantially improved, as evidenced by an expanded depletion width (236 to 286 nm), a reduced interfacial defect density (1.31 × 10 15 to 4.60 × 10 14 cm −3 ), and prolonged carrier lifetimes (1.20 to 2.48 and 99 to 208 µs, respectively). First‐principles calculations further reveal that Mn incorporation reconstructs defect formation energetics by suppressing deep Sn Zn antisites while favoring shallow acceptor‐type defects, thus mitigating Shockley–Read–Hall recombination and strengthening p‐type transport. Consequently, a V OC of 550.7 mV and an efficiency of 14.35% are achieved, representing the highest performance reported to date for Mn‐modified CZTSSe solar cells.
- Top Cited Papers
- 25 February 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (3) , 460-469
Regulating grain growth via Li2SnS3 interphase in kesterite solar cells with certified efficiencies exceeding 15%
- 25 February 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (3) , 460-469
Top Cited PapersRegulating grain growth via Li2SnS3 interphase in kesterite solar cells with certified efficiencies exceeding 15%
- 27 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (44) , 60590-60599
Controlled Nucleation and Crystallization for Efficient Solution-Processed CIGS Solar Cells
Solution-processed CIGS solar cells present a cost-effective alternative for photovoltaic production, yet they exhibit significant power conversion efficiency (PCE) losses compared to vacuum-deposited counterparts. The performance limitations originate from inferior film quality, which stems from fundamentally different growth mechanisms. Here, we propose a novel preannealing strategy for the CIGS precursor film, which can regulate the nucleation and crystallization pathway. Characterization reveals that preannealing enlarges nucleation sizes while reducing nucleation sites, thereby promoting grain growth and yielding high-quality absorbers with compact morphology, enhanced crystallinity, and fewer defects. Ultimately, the optimized CIGS solar cells exhibit an impressive PCE of 17.51%, which is among the top values for solution-processed CIGS solar cells. This nucleation and crystallization regulation strategy provides a framework for growth optimization to achieve high-performance, solution-processed chalcopyrite photovoltaics.
- 27 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (44) , 60590-60599
Controlled Nucleation and Crystallization for Efficient Solution-Processed CIGS Solar Cells
Solution-processed CIGS solar cells present a cost-effective alternative for photovoltaic production, yet they exhibit significant power conversion efficiency (PCE) losses compared to vacuum-deposited counterparts. The performance limitations originate from inferior film quality, which stems from fundamentally different growth mechanisms. Here, we propose a novel preannealing strategy for the CIGS precursor film, which can regulate the nucleation and crystallization pathway. Characterization reveals that preannealing enlarges nucleation sizes while reducing nucleation sites, thereby promoting grain growth and yielding high-quality absorbers with compact morphology, enhanced crystallinity, and fewer defects. Ultimately, the optimized CIGS solar cells exhibit an impressive PCE of 17.51%, which is among the top values for solution-processed CIGS solar cells. This nucleation and crystallization regulation strategy provides a framework for growth optimization to achieve high-performance, solution-processed chalcopyrite photovoltaics.
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30411-30418
Simultaneously optimizing the heterojunction band alignment and passivating the absorber grain boundaries for kesterite solar cells with 14.26% efficiency
The introduction of Na 2 S simultaneously optimizes the CZTSSe/CdS heterojunction and passivates kesterite grain boundaries, reaching 14.29% efficiency with V OC improved by 42 mV.
- 6 August 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (36) , 30411-30418
Simultaneously optimizing the heterojunction band alignment and passivating the absorber grain boundaries for kesterite solar cells with 14.26% efficiency
The introduction of Na 2 S simultaneously optimizes the CZTSSe/CdS heterojunction and passivates kesterite grain boundaries, reaching 14.29% efficiency with V OC improved by 42 mV.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (17) , 8366-8381
Phase evolution regulation of CZTSSe absorbers via a ZnO blocking layer enables 14.45% efficient kesterite solar cells with low VOC deficit
The deep defects and secondary phases arising from complex phase evolution pathways pose a significant challenge that hinders the efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Here, we regulate the phase-evolution pathways of CZTSSe by implementing a novel ZnO blocking layer on the kesterite precursor surface. The ZnO layer, which remains stable at low temperatures, effectively prevents contact and reactions between the precursor and low-concentration selenium (Se), thereby suppressing complex phase evolution pathways. As the temperature rises, the gradual diffusion and eventual disappearance of the ZnO layer facilitate a one-step phase transition between the precursor and high-concentration Se at elevated temperatures, leading to the direct formation of CZTSSe. This method yields high-quality CZTSSe films characterized by high crystallinity, absence of secondary phases, and fewer defects. Consequently, band tail states and non-radiative recombination are significantly suppressed, enhancing charge transportation and extraction. Ultimately, we achieve a state-of-the-art CZTSSe device with an efficiency of 14.45% and a VOC of 572.6 mV, featuring the lowest VOC deficit reported in kesterite solar cells (VOC/VSQ OC = 69.7%). This study offers valuable insights into the regulation of phase evolution and selenization process of CZTSSe absorbers, paving the way for more efficient solar cell designs.
- 29 July 2025
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 18 (17) , 8366-8381
Phase evolution regulation of CZTSSe absorbers via a ZnO blocking layer enables 14.45% efficient kesterite solar cells with low VOC deficit
The deep defects and secondary phases arising from complex phase evolution pathways pose a significant challenge that hinders the efficiency of Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Here, we regulate the phase-evolution pathways of CZTSSe by implementing a novel ZnO blocking layer on the kesterite precursor surface. The ZnO layer, which remains stable at low temperatures, effectively prevents contact and reactions between the precursor and low-concentration selenium (Se), thereby suppressing complex phase evolution pathways. As the temperature rises, the gradual diffusion and eventual disappearance of the ZnO layer facilitate a one-step phase transition between the precursor and high-concentration Se at elevated temperatures, leading to the direct formation of CZTSSe. This method yields high-quality CZTSSe films characterized by high crystallinity, absence of secondary phases, and fewer defects. Consequently, band tail states and non-radiative recombination are significantly suppressed, enhancing charge transportation and extraction. Ultimately, we achieve a state-of-the-art CZTSSe device with an efficiency of 14.45% and a VOC of 572.6 mV, featuring the lowest VOC deficit reported in kesterite solar cells (VOC/VSQ OC = 69.7%). This study offers valuable insights into the regulation of phase evolution and selenization process of CZTSSe absorbers, paving the way for more efficient solar cell designs.
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2761-2769
Phase Evolution Extension of Cu2ZnSn(S,Se)4 Absorber Boosting the Efficiency of Kesterite Solar Cells to 14.99%
- 14 May 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (6) , 2761-2769
Phase Evolution Extension of Cu2ZnSn(S,Se)4 Absorber Boosting the Efficiency of Kesterite Solar Cells to 14.99%
- 19 September 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (10) , 4939-4946
Low-Temperature Annealing of CdS:In/Cu2ZnSn(S,Se)4 Heterojunction Boosting 14.5% Efficiency Kesterite Solar Cells
- 19 September 2024
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 9 (10) , 4939-4946
Low-Temperature Annealing of CdS:In/Cu2ZnSn(S,Se)4 Heterojunction Boosting 14.5% Efficiency Kesterite Solar Cells
- 20 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (38) , 25643-25677
Defects in kesterite materials towards high-efficiency solar cells: origin, impact, characterization, and engineering
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) is one of the most promising materials for photovoltaics. CZTSSe solar cells have achieved an efficiency of 15.1%, yet further improvements have been challenging. Defects in light-absorbing layers have indelible effects on the performance of kesterite solar cells. In the development of CZTSSe solar cells, a good understanding and effective engineering of the defects in CZTSSe absorbers have been demonstrated to be crucial factors for the fabrication of high-efficiency CZTSSe solar cells. Some effective defect passivation strategies have successfully been applied to reduce defects in CZTSSe absorbers to improve film quality and device properties. Defect characterization techniques also play an important role in clarifying the mechanism of defect passivation in CZTSSe solar cells, allowing the development of more prospective passivation strategies. This review summarizes the types of defects in CZTSSe absorbers and the mechanisms for their formation, as well as their impact on the device performance. Furthermore, commonly used defect passivation strategies and advanced measurements of defects were precisely reviewed, aiming to provide powerful guidelines for further commercialization and applications of CZTSSe solar cells.
- 20 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 12 (38) , 25643-25677
Defects in kesterite materials towards high-efficiency solar cells: origin, impact, characterization, and engineering
Kesterite Cu2ZnSn(S,Se)4 (CZTSSe) is one of the most promising materials for photovoltaics. CZTSSe solar cells have achieved an efficiency of 15.1%, yet further improvements have been challenging. Defects in light-absorbing layers have indelible effects on the performance of kesterite solar cells. In the development of CZTSSe solar cells, a good understanding and effective engineering of the defects in CZTSSe absorbers have been demonstrated to be crucial factors for the fabrication of high-efficiency CZTSSe solar cells. Some effective defect passivation strategies have successfully been applied to reduce defects in CZTSSe absorbers to improve film quality and device properties. Defect characterization techniques also play an important role in clarifying the mechanism of defect passivation in CZTSSe solar cells, allowing the development of more prospective passivation strategies. This review summarizes the types of defects in CZTSSe absorbers and the mechanisms for their formation, as well as their impact on the device performance. Furthermore, commonly used defect passivation strategies and advanced measurements of defects were precisely reviewed, aiming to provide powerful guidelines for further commercialization and applications of CZTSSe solar cells.
- 4 May 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (21) , 11454-11462
Regulating charge carrier recombination in Cu 2 ZnSn(S,Se) 4 solar cells via cesium treatment: bulk and interface effects
Alkali post deposition treatment (PDT) of the absorber material is an efficient strategy to boost the desired photovoltaic performance of kesterite-based Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Here, a simple and innovative solution-processed cesium PDT method was employed as an effective strategy for the CZTSSe absorber bulk and interface modification toward efficient CZTSSe-based photovoltaic devices. The material properties of the CZTSSe thin film and the photoelectric properties of the corresponding photovoltaic devices are investigated subsequently. After Cs treatment, the Cs element is mainly detected on the surface of the CZTSSe-based sample, while the phase structure itself is not affected. Systematic studies reveal that the presence of small amounts of cesium in the CZTSSe absorber bulk results in a low defect concentration, prevents the bandgap tail states, enlarges the depletion region width, and reduces the carrier recombination. Meanwhile, the majority of the Cs element detected on the surface inhibits the carrier recombination, and leads to improved carrier transport and extraction. Benefiting from the synergistic optimization effects brought by Cs treatment, a champion device with 12.83% efficiency is achieved using the 1.25 wt% CsCl hot solution with a soaking time of 30 s, which is ≈26% higher than that of its pristine counterpart (10.21%). Our work offers judicious direction to expedite design strategies for solving bottleneck problems regarding the bulk and interface recombination, showing a promising future in developing efficient kesterite-based CZTSSe photovoltaic devices.
- 4 May 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 11 (21) , 11454-11462
Regulating charge carrier recombination in Cu 2 ZnSn(S,Se) 4 solar cells via cesium treatment: bulk and interface effects
Alkali post deposition treatment (PDT) of the absorber material is an efficient strategy to boost the desired photovoltaic performance of kesterite-based Cu2ZnSn(S,Se)4 (CZTSSe) solar cells. Here, a simple and innovative solution-processed cesium PDT method was employed as an effective strategy for the CZTSSe absorber bulk and interface modification toward efficient CZTSSe-based photovoltaic devices. The material properties of the CZTSSe thin film and the photoelectric properties of the corresponding photovoltaic devices are investigated subsequently. After Cs treatment, the Cs element is mainly detected on the surface of the CZTSSe-based sample, while the phase structure itself is not affected. Systematic studies reveal that the presence of small amounts of cesium in the CZTSSe absorber bulk results in a low defect concentration, prevents the bandgap tail states, enlarges the depletion region width, and reduces the carrier recombination. Meanwhile, the majority of the Cs element detected on the surface inhibits the carrier recombination, and leads to improved carrier transport and extraction. Benefiting from the synergistic optimization effects brought by Cs treatment, a champion device with 12.83% efficiency is achieved using the 1.25 wt% CsCl hot solution with a soaking time of 30 s, which is ≈26% higher than that of its pristine counterpart (10.21%). Our work offers judicious direction to expedite design strategies for solving bottleneck problems regarding the bulk and interface recombination, showing a promising future in developing efficient kesterite-based CZTSSe photovoltaic devices.